Washing brushes

Monfort / Monfort-Bürsten

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input frequency: 50 Hz, input voltage: 400 V, pressure: 6 bar, LiSEC, KSR-25, Right – Left, year 2010 Vertical Glass Edge Seaming Machine, h=2,50 m Vertical compact grinding machine for the seaming of glass sheets on all four sides in a fully automatic cycle. Inspection during production is possible by appointment. Iodpfx Aev Eguyjadjan In very good working condition. Available: March / April 2025.

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test Ijdpfx Aaexnvq Esdoan © Various control components • Price on request

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Hydro 3000.6 Max. Glas-height: 3.000 mm Iaedpfx Aswd N Urjadjn Thickness: 3-22 mm Prewashingzone / Mainwashingzone / drying zone Stainless steel body 6 brushes (150 mm) maid out of one piece with Incl. water tanks incl. vacuum system for drying zone LED lights on the outled for inspection

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, CMS AURA automatic vertical dry seaming machine Max. working height: 2.700 mm Glas-Thickness: 4-22 mm Max. Glaslänge: 3.100 / 4.500 mm Stand-Alone or integrated into the ISO Line Iaedjwd Ihqjpfx Aadon Very easy operation with nearly no maintainance.

Condition: like new (used), Year of construction: 2002, functionality: fully functional, total length: 3,000 mm, total width: 800 mm, total height: 1,000 mm, input voltage: 400 V, overall weight: 850 kg, type of input current: three-phase, Manual Lisec butyl extruder LBH-25V, year 2002, fully overhauled (technically and optically), for profile widths 6-24 mm, 2 butyl storage cylinder for x 7,5 kg butyl. Iaodpfx Asydc Nnoaden The machine will be available by the late in February / early in March 2026. Please note: the photos show the same type extruder after our last overhaul.

Year of construction: 2021, condition: like new (used), functionality: fully functional, Vertical infeed transport - Vertical 2600 mm washing machine with drying - Tilting table (behind the washing machine) - Horizontal outfeed transport Pos. 1 Loading station, 250kg With the help of the suction frame, the sheets are taken off the glass rack and they are placed vertically on the tilting table in front of the washing machine. Differences in inclination can be compensated by tilting of the suction frame. The suction frame has a rotating function to collect short formats in upright position and to place them down on the long edge. Light crane Trolley crane with a lift system travelling on rails by hand, which are standing on steel supports. Lift Electrical lifting and lowering, horizontal turning and tilting of loads. Generation of vacuum via vacuum pump system with check and display of the vacuum power. A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustical signal is given. Pos. 2 Vertical Inlet Transport WM The vertical transport serves as inlet transport in front of the washing machine. In horizontal position, the glass sheets are placed on Vulcan transport rollers. In vertical position transport rollers with Perumaan rings are driven via screw wheels. The transport rollers are arranged in drag bearings placed on a solid welded frame. Small glass sheets are placed manually on the transport frame. After placing the glass sheet, the transport is activated by push button. Pos. 3 Vertical Washing Machine with Drying The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel. The rubber rings of the transport rollers are resistant to cutting oil. Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine. The washing machine is equipped with energy and water saving cascade system. Pre-rinsing section with Flat jet spraying nozzles Washing section with 3 pairs of brushes, 3 vats and 3 pumps Acid section with Iaedstwphwopfx Aadon 1 pair of brushes, 1 vat and 1 pump Drying section with 2 pairs of drying nozzles provide dry edges. Pos. 4 Vertical Inspection Transport with glass Activation Section The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table. Drive by a geared motor, A.C., frequency controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels. The transport rollers are vulcanized and ground. Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,000 mm, total height: 4 mm, warranty duration: 12 months, PROFESSIONAL TECHNICAL BLACK FELT for manual and automatic glass cutting tables We offer high-quality technical black felt designed for covering the tops of glass cutting tables – both manual and automatic. The felt provides effective protection for glass sheets, ensures stable material handling, and maintains high durability even during intensive, everyday use. The product is used by leading manufacturers of machinery for the glass industry. Applications: - Manual glass cutting tables - Automatic and semi-automatic tables - Assembly and workstations Key features: - Deep, intense black color - High density and excellent abrasion resistance - Stable structure and uniform surface - Suitable for industrial use - Proven in professional glass processing plants Technical specifications: Iasdpfx Aaox Rp U Seden - Roll width: 200 cm - Thickness: 4 mm - Chemically hardened on one side - Sold by the running meter - Mounting: contact adhesive Why choose our product: - A solution dedicated for professionals - Enhances quality and workplace safety - Extends the service life of table surfaces - Product ready for immediate application

Condition: used, Year of construction: 2002, Frame material: stainless steel/plastic/aluminum Height: 2800mm Length: 14800mm Depth: 1800 mm Weight: approx. 3580kg Iajdpfx Aow Dpx Deadon Condition: good/second-hand

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total length: 20,800 mm, total width: 9,500 mm, total height: 2,000 mm, year of last overhaul: 2024, Maximum glass processing size 2000 x 3000 mm Iodpfx Aaotvmkfjdoan

Condition: used, Year of construction: 1989, total width: 1,600 mm, isec max 1600-6 mm Year: 1989 Working width - 1600mm. Glass thicknesses 2 – 26mm. Minimum glass size 350 x 180mm. Pre-spray over 1200mm long driven in feed conveyor. 3 wash sets each with a pair of cylindrical brushes, Iaedjvy D Akjpfx Aadsn recycling tank, heaters. Tank withdrawal to left side, s S-WSH-383