Straightening and cutting machine

MRP RA13

Year of construction: 1985, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-12mm Gscxckebw Dwodpfx Anoh In Thjzja Run out table - 4m Speed -80' m/min. Reconstruction- 2022

Year of construction: 2017, operating hours: 30 h, condition: as good as new (ex-display), Strip thickness max. 4 mm Strip width 300 mm Repeat accuracy +/- 0.05 mm Dwsdpfx Aob Nbgljnzsa NC drive with compact control unit Feed force 3000 N (300 kg) Strip clamping pressure max. 1.2 tons

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear Dwedpfxefkmr Se Anzsa (5) indexing rotary arbors (4) pre-feed rolls 80 to 120 mts/min Max. cutoff lgth: 15 meter track Indexing wire/rod collector 30kW (40HP) AC motor Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 3 vertical payoff units Completely refurbished machine

Condition: excellent (used), Year of construction: 2009, Technical Details : Year - 2009 Beam welding machine outlet height: 1400mm (UK beam from ground) Min. strap length: 0.8 m Max. beam length: 16.0 m Base width during production: 58 mm (inside diagonals) Finished beam width: 70 – 116 mm (external dimensions of bottom chords) Lattice girder production speed: max. 15 m/min Design of the wire feed speed: 18 m/min (upper and lower belt) Dedpfx Anorn N Efozewa 38 m/min (diagonals) Carrier types that can be produced: KT KTS Top belt Ø: 5 – 16 mm 5 – 7 mm Lower belt Ø: 5 – 16 mm 5 – 7 mm Diagonal Ø: 4.5 – 9 mm 5 – 7 mm Height: 70-400mm 80-310mm Division of the diagonal: 190 – 210 mm 200 mm Primary material: Cold or hot rolled reinforcing steel from coil in accordance with EN 10080:2005 in weldable quality, max. carbon content 0.20 % The line is in excellent working condition !

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D08L/7600, Offer Number: D08L/7600 Machinetype: straightening and cutting machine Make: WAFIOS Type: RS40S Constr. year: 1980 Dwodpfx Aewi S N Njnzea diameter range: 4-10 mm cutting length: 3000 mm speed - meters/min: 130 Location: In our warehouse

Year of construction: 1988, condition: ready for operation (used), A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible. Dwedewfg Ewjpfx Anzsa

Condition: ready for operation (used), A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible. Dwjdpfx Anoyvuuzozsa

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working range: 1,000 mm, For sale is a completely refurbished Schlatter radiator welding line consisting of: - Back-up ring unit (EBV) - 2-row multi-spot welding machine (hydraulic) - 2-row convector welding machine (pneumatic) - Longitudinal seam welding machine (NFR) - Cross-seam welding machine (NQD) - Cutting shear (TS10) - Corner cutting machine (ESV) - Transverse edge closing device (QRSV) - Transport & turning device (TVW) - Nipple & spacer welding system (NIAH) - Test basin (water) Control system: Siemens S7 TIA Dwsdpfx Anev Edlvjzoa Please note that the radiator welding line is only available in a fully refurbished condition.

Condition: good (used), Year of construction: 2020, functionality: fully functional, working width: 3,700 mm, welding power (max.): 2,200 kVA, wire diameter (max.): 25 mm, type of input current: three-phase, 1. EVG QC76/144-ZL/PV Wire Mesh Welding Line Description Dwodpfx Anoy Aig Sozja EVG High-Performance Mesh Welding Line - Type QC76/144-ZL/PV · Max. Sheet Width: 3,700 mm (Welding width: 3,600 mm) · Sheet Length Range: 1,500 mm – 12,000 mm · Wire Diameter Range: Line wire (6 – 25 mm) / Cross wire (6 – 16 mm) · Max. Working Speed: 90 CW (cross wire) / min. · Line Wire Spacing: 75 mm – 1,000 mm (Steplessly programmable) · Cross Wire Spacing: 50 mm – 2,000 mm (Steplessly programmable) · Number of Line Wires: Max. 33 wires · Input Material: Pre-cut and straightened line and cross wires (Cold-formed/Hot-rolled) · Power Rating: 2,200 kVA (Driving power: 120 kW) Key features · Versatility: Optimized for the economic production of special sheets and engineered fabric, even for the smallest lot sizes. · Precision: Features steplessly programmable spacing for both line and cross wires, allowing for highly customized mesh designs. · Heavy-Duty: Capable of welding large diameter wires (up to 25 mm), suitable for structural and industrial applications. · Automation: Advanced cascade welding system (automatic) for efficient multi-diameter operations. 2. EVG DRE16 Wire Straightening Machine Description EVG DRE16 High-Speed Wire Straightening and Cutting Machine · Wire Diameter Range: 8 mm – 16 mm · Max. Feed Speed: 160 m/min. · Max. Wire Strength ($Rp0.2): 600 N/mm2 · Driving Power: 85 kW · Power Supply: 380 V, 60 Hz, 3ph · Color: RAL 7001 (Grey) / RAL 3011 (Red) · Standard Compliance: EN 60204-1, IEC 60364-4-41 TN-C Key features · High Productivity: Offers a superior straightening speed of up to 160 m/min, ensuring high throughput for downstream welding lines. · Material Compatibility: Specifically designed to handle high-strength wire up to 600 N/mm2. · Reliability: Built with EVG’s renowned precision engineering for consistent straightening quality and long-term durability. * Machine can be seen in factory.

Condition: used, WAFIOS Straightening and cutting machine Model R7/50 Working range Dsdpoymcfbjfx Anzewa - Diameter: 1,5-7 mm - Cutting length: 2000 mm - Speed: 19-50 m/min - Motor power: 7,5 kW