Used Ch for sale (12,703)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed and dimensioned according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feeding modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Dkedpfx Apezw Apgjmew Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW thermal, installed electrical power 690 kW electrical. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow rate at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the outlet of the discharge duct and the dryer. The dryer is designed for an ambient temperature of up to -40°C; the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The furnace is NOT included in the offer; we only sell the belt dryer! The working level of the dryer is supported by steel columns approximately 8.00 m high and is enclosed with thermally insulating sandwich panels. A hall or other production components can be placed under and between the columns (see documents, steel structure). The system has been disassembled and stored by an experienced assembly team; this team can be arranged for transport and reassembly. Please note: We only sell this belt dryer without a furnace and no other parts! Please send your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Dedpfxezrg T Ee Apmjkw Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: new, Year of construction: 2022, APS PHE BRAND NEW ASP PHE for Milk pasteurisation CH - UX 10.5 5000 Liters per hour || Never used | Year 2022 | Contact us for more information ARSOPI PHE For Milk 5000 L/H Condition : New IN STOCK Dsdpfjz Ht Eusx Apmokw Usage: Milk Pasteuriser Capacity: 5000 L/h

Condition: good (used), DHI PPCH-G High Pressure Gas Controller/Calibrator 100MPa / 15,000psi With Carry Case Pressure control to 100MPa (15,000 psi). AutoRange feature. One of two Q-RPT’s in each controller with 10:1 turndown. Supports external reference pressure transducers. FLASH memory for simple and free embedded software upgrades. Dodpfo Ad D Nlox Apmekw

Year of construction: 2007, operating hours: 7,682 h, condition: excellent (used), functionality: fully functional, Used Powerscreen Chieftain 1400 Tracked Screening Plant Year 2007 +/- 7682 Hrs Just Been Fully Serviced On Engine & Hydraulics New HRC Couplings Various New Rollers Steam Cleaned Dsdpj Ahpxmjfx Apmjkw Deutz Engine 11ft x 5ft Two Deck Screenbox Tipping Grid 24,000 kgs Weight All Belts, Rollers, Bearings In Very Good Working Condition

Year of construction: 2012, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Co. GV2K vertical form, fill and seal bagging machine with ICE Zodiac Hawk Printer. Serial number for VFFS Bagger - GV121540. Date of manufacture - 2012. Sealing bars: Horizontal - 250mm long & Vertical - 430mm long. Forming tube - Rectangular, 80mm x 50mm. Pack types - Block-bottom, square-edge, or structured pouch. Dodpfx Ae Ahut Depmskw Overall dimensions – 1250mm wide x 1650mm deep x 1880mm high.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, We offer a STEM continuous spray coating machine – CH 12x18.5/3W1E/MS/8x1T. Year of manufacture: 2019. Dedoz Dfzcepfx Apmekw Chamber dimensions: 1200 x 1850 mm. The equipment has 3 turbines.

Year of construction: 2020, condition: used, Burdosa (often associated with Burtech or Herwig Burget) manufactures industrial continuous mixing and liquid dispersion equipment—such as the Burdosa GR80 dynamic loop mixer-emulsifier. Key Features of Burdosa Mixers (e.g., Model GR80) - Design: Totally enclosed, symmetric-cylindrical inline continuous dynamic loop mixer. - Function: Provides continuous back-mixing, dispersion, and emulsification by guiding components through a central mixing zone. - Shearing Tools: Can be fitted with interchangeable shearing heads depending on whether the process requires gentle mixing, standard blending, whipping, or fine emulsification. - Capacity & Power: Typically rated around 60 to 92 gallons per minute (depending on configuration and product viscosity) and powered by a ~5.3 to 5.5 HP (4.0 kW) motor. Dkjdpfo Ahr Itjx Apmow - Sanitation: Designed to be CIP (Clean-in-Place) compatible for food-grade processing. Application in Margarine Production In margarine and fat-blend processing lines, dynamic loop or inline high-shear mixers are used to: - Blend the water-and-oil (fat) phases together into a preliminary emulsion before it moves to scraped-surface heat exchangers/crystallizers. - Jongia Mixing Technology +1 - Incorporate minor liquid or solid additives (such as emulsifiers, salt, or vitamins) uniformly into the continuous or dispersed phase. - Jongia Mixing Technology - Maintain controlled residence and back-mixing to prevent phase separation before chilling and texturizing Products: Margarine, Mayonaise, etc. Condition: Excellent Available: Immediately

Condition: excellent (used), Year of construction: 2022, Ref: 11171 . 2022 IML S74/13 Pneumatic Corner Cutting Machine Single-head pneumatic corner cutter for paper and board finishing, suitable for bookbinding and cover-making applications. Specification: Dsdpfx Aj Ah D Snspmskw Operation: Pneumatic Cutting thickness: 0–35 mm Cutting stroke: 50 mm Cutting angle: Dependent on fitted tooling Overall dimensions: 700 × 550 × 1,250 mm (L × D × H) Weight: Approximately 100 kg

Condition: good (used), functionality: fully functional, Mikron WF 32 CH with Heidenhain TNC 355 Deds Afacqepfx Apmskw

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: manual, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 5 mm, bending angle (max.): 180 °, input voltage: 400 V, input frequency: 50 Hz, Equipment: emergency stop, It is a machine from 2018 and we used very little. Dodpfxsyvhl Hj Apmskw We can bend pipe from 18 mm - 60 mm Machine cost new 2018 was ca 45.000,00 EUR and tools was ca 55.000,00 so total was EUR 100.000,00

Condition: good (used), Year of construction: 1999, functionality: fully functional, 1 x Bar feeder Iemca CH 220/32 Year of manufacture: 1999 Bar machining diameter: 2 - 20 mm Bar length: 3200 mm Built-in channel: 16 mm Previously used with a CNC long turning lathe Star SA 16 The bar feeder can be inspected at our warehouse at any time. Dksdpfx Aoz Hpnfjpmjw

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,199 h, functionality: fully functional, machine/vehicle number: 24C13 0463, working width: 1,125 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working width: 1,125 mm Djdj Aidu Aopfx Apmskw Battery voltage: 24 V Battery tray length: 520 mm Battery tray width: 520 mm Battery tray height: 380 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,000 x 1,950 mm Weight: 557 kg Transport packages: 1 unit Operating hours: 1,199 h EQUIPMENT Documentation CE marking

Condition: ready for operation (used), functionality: fully functional, working width: 2,700 mm, total width: 2,600 mm, total length: 5,000 mm, total height: 1,500 mm, overall weight: 4,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Dodpfx Ae Aiduiepmokw Working width: max. 2,700 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,600 x 1,500 mm Unladen weight: 4,000 kg Transport packages: 1 unit

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,000 kg, spindle nose: R8, Bridgeport 2HP Milling Machine Vari speed Spindle speeds 60-4200rpm Table size 42" x 9" Dkede Adrp Topfx Apmow Chrome bedways Powered Traverse X Axis 2 Axis DRO Led work light Coolant pump & system Spindle Taper R8 Reground table as photos Metric leadscrews Power 3phase 400v

Condition: used, Year of construction: 2003, machine/vehicle number: 729.723.01, MACHINE DETAILS Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Rated operating current: 165 A Incoming feed line protection: 200 A Microcut Motor power: 90 kW Rated current: 158 A Mixing screw Motor power: 2.2 kW Rated current: 5.20 A MC screw Motor power: 4.0 kW Rated current: 8.80 A Conveyor screw Motor power: 3.0 kW Rated current: 6.80 A Dkodpfx Apo Ahgikemow Agitator, buffer tank Motor power: 1.5 kW Rated current: 3.60 A Note: Further technical data can be found in the attached document.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 919254, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, For sale during the jeans factory liquidation is a GLOBAL US 63900 CH-NA-AUT automatic industrial chainstitch hemming machine, offered as a complete workstation. This modern (2019) unit is specifically designed for high-quality bottom hemming in denim, trousers, and workwear production. Built on the well-known 63900 platform, it delivers the classic chainstitch finish required in professional garment manufacturing. The machine features automatic functions including thread trimming and pneumatic operation, enabling efficient and consistent production with minimal manual intervention. The unit has been used in a professional production environment and was fully operational prior to factory shutdown. The machine has been serviced on 27.02.2026 and video recorded in full operation in April 2026. Key features: • Automatic chainstitch hemming system • High-speed production capability • Classic 63900 chainstitch finish (denim standard) • Automatic thread trimming • Pneumatic presser foot operation • Stable feeding and consistent stitch quality Dkedpfey Ipu Tox Apmsw • Modern unit (2019 model) with low mechanical wear Includes: • GLOBAL US 63900 CH-NA-AUT machine head • Industrial sewing table • Motor and control unit • Foot pedal • Thread stand • Integrated hemming and trimming system • Suction system for thread and fabric waste (visible) Technical details: • Manufacturer: Global Selection (Netherlands) • Model: US 63900 CH-NA-AUT • Year: 2019 • Stitch type: Chainstitch • Max speed: approx. 5,000 stitches per minute • Needle system: DVx57 • Power: 220V • Pneumatic system required Condition: • Used, excellent production condition • Fully operational prior to shutdown • Serviced on 27.02.2026 • Typical signs of use • Sold as-is, where-is, without warranty Typical applications: • Denim bottom hemming • Garment finishing • Workwear production • Chainstitch hemming operations Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: used, Year of construction: 2018, Ice Machine Dodpfx Ajwp R Rlspmekw Make: Ice Systems (UK) Model: F2AS Built 2018 Produces Flake Ice Capacity: Rated at 2 ton per 24hrs With stand, in cabinet Touch screen controls

Condition: like new (used), Year of construction: 2022, functionality: fully functional, punching force: 18 t, working range: 2,500 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, Used Trumpf TruPunch 3000 S20 with Sheet Master Compact sheet load and unload for sale Technical data TruPunch 3000 medium format (S20) Dimensions, weights Width 6282 mm Depth 6548 mm Height 2195 mm Weight with all units 10700 kg Control, hardware, electrics Hard disk type SSD Number and size of the hard disc 2 GB x 120 GB Hard disk memory for customer programmes 10 GB Screen Touch screen Screen size 21.5 in Interface USB Network connection RJ45 Control type Bosch CML75 Operating system Windows 10 IoT Axis data X/Y/C axis drive NC-controlled, maintenance-free three-phase current servo motors Punching head drive Electric drive Maximum axis speeds - X axis 90 m/min Maximum axis speeds - Y axis 60 m/min Maximum axis speeds - Simultaneous 108 m/min Maximum axis speeds - C axis (punching) 350 rpm Maximum axis speeds - C axis (tapping) 350 rpm Maximum punching stroke rate (E = 1 mm) 800 1/min Maximum marking stroke rate 1000 1/min Precision - Positioning deviation Pa +/- 0.1 mm Precision - Position range Ps +/- 0.03 mm Precision - Smallest programmable increment 0.001 mm Working range and workpiece size Maximum sheet thickness 6.4 mm Maximum workpiece weight 150 kg Working range - X axis 2500 mm Working range - Y axis 1250 mm Punch-specific data Maximum punching force 180 kN Maximum presser foot force 20 kN Maximum tool size, punching (outer circle) 76.2 mm Maximum tool size, forming (outer circle) 101.6 mm Single tool changing time 2.8 s MultiTool changing time 0.5 s Number of linear magazine stations 20 pieces Number of tools when using MultiTool / clamps 18 pieces - 180 pieces Loading / part removal Maximum part size, part removal flap, punching 400 mm x 600 mm Flap size (X x Y) 400 mm x 1250 mm Maximum part size, fixed chute, punching 180 mm x 180 mm Connected loads, ambient temperature Pressure range, compressed air connection minimum (same direction) / maximum (static) 7 bar / 14 bar Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20 Switch cabinet/periphery grey, RAL 7040 SheetMaster Compact 2500 x 1250 mm (AK05) General Maximum Y1 axis traverse speed (suction frame) 27 m/min Maximum Y2 axis traverse speed (unloading cart) 18 m/min Maximum Z axis traverse speed 20 m/min Y/Z axis drive Asynchronous motors controlled by frequency converter Djdpfx Apoykt N Ssmskw Loading Maximum sheet size 2500 mm x 1250 mm Minimum sheet size 1000 mm x 1000 mm Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Unloading Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Maximum stack height 190 mm Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20

Condition: ready for operation (used), Year of construction: 1965, operating hours: 5,128 h, functionality: fully functional, machine/vehicle number: 01123, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, table length: 1,000 mm, table width: 800 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between December 1, 2026, and December 10, 2026! TECHNICAL DETAILS Speed range: 12.5–1,000 rpm Table dimensions: 1,000 × 800 mm Number of T-slots: 7 Travel range X-axis: approx. 600 mm Travel range Y-axis: approx. 500 mm Travel range Z-axis: approx. 600 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 14 A Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,000 x 2,300 mm Machine weight: 6,000 kg Operating hours (read): 5,128 h Dkodpj Ahn Arofx Apmjw EQUIPMENT Tool holders WALTER dividing head Four-jaw chuck, diameter 200 mm Various clamping devices External reference: Frankenthal - Lot 391

Condition: used, mileage: 81,800 km, power: 353 kW (479.95 HP), first registration: 09/2025, overall weight: 27,500 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2027, brakes: retarder, color: white, emission class: euro6, Equipment: ABS, crane, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment: Complete equipment available upon request. * 590 l fuel tank capacity * 60 l AdBlue tank capacity, left * Electronic Braking System (EBS) * Anti-lock Braking System (ABS) * Full braking assistant * High-performance engine brake MAN EVBec, multi-stage * Retarder Eco, speed-dependent, multi-stage, energy-efficient * Disc brakes on front axle * Disc brakes on rear axle * Disc brakes on trailing axle * Diesel engine MAN D2676 353 kW (480 hp) power, 2,450 Nm torque, Euro 6e * MAN TipMatic 12.28 OD, with Retarder 35 * Front axle tires 355/50R22.5 * Rear axle tires 295/60R22.5 * Trailing axle tires 355/50R22.5 * Tire Pressure Monitoring System (TPM), with tire temperature display * Tire pressure display for trailer * Digital axle load display (ALM) for fully air-suspended vehicles, incl. total weight display * Digital axle load display (ALM) for trailer/semi-trailer * 8,500 kg front axle suspension capacity * 13,000 kg rear axle suspension capacity * 8,000 kg trailing axle suspension capacity * GM cab: spacious (wide, long, medium height) * Glass sunroof, electric * 0P1VX LED package Plus, headlights, fog lights, cornering lights * Headlights, LED * Daytime running lights, LED * Fog lights, LED * Cornering lights, LED * Premium driver's seat package, air-suspended, seat heating and seat ventilation * Seat ventilation, driver's seat * Professional instrument panel 12.3 inches * Electric auxiliary air conditioning system * Air conditioning, Climatronic * Auxiliary water heater, 4 kW, for hazardous goods vehicles (according to ADR) * Electronic Stability Program (ESP) * Traction control system (ASR) * Adaptive Cruise Control (ACC) Stop and Go, distance-controlled * Speed limiter, adjustable, limiter (engine control) * Emergency braking assistant EBA, non-deactivatable * Lane departure warning system LDW, non-deactivatable * Lane change assist LCS and cornering assist * Attention assistant MAN AttentionGuard, non-deactivatable * Traffic sign recognition * 0PHND Reversing Motion System * Distance warning * MAN Media System Professional Navigation 12.3 inches * MAN Sound System Advanced with subwoofer * Navigation map Europe and Russia * Trailer coupling on end cross member, RINGFEDER type RF40/G150A * Auxiliary drive, gearbox-dependent, type NTX/10c, without flange, f=1.15, position approx. 3:30 * Roof lamp bar incl. 4 rectangular spotlights and door entry lighting Djdpfx Ae Ah Nnbepmjkw * Topcoat, cab, TRAFFIC WHITE RAL 9016 N * 1 unit, container platform body in low-profile design * 2 pairs of container locking mechanisms, extendable to approx. 3 m for accommodating 20 ft containers * Front wall approx. 1,900 mm, optionally with approx. 9 mm inner side wall dimensions: approx. 6,300 x 2,480 x 600/1,900 mm * 1 unit, MKG loading crane HLK 531HP a6, reach/lifting capacity: (approx.) 4.35 m/10,350 kg, 5.90 m/7,450 kg, 7.85 m/5,450 kg, 9.90 m/4,200 kg, 11.95 m/3,400 kg, 14.10 m/2,850 kg, 16.25 m/2,450 kg, boom adjustment +20°, electronic crane management system * Radio remote control, 4-channel * Plus optional second swivel gear to increase the swivel torque by 12,000 Nm, crane superstructure with cathodic dip coating and topcoat in RAL 9005 deep black.

Condition: used, total height: 1,700 mm, total length: 1,400 mm, total width: 900 mm, Year of manufacture: 1970 Colour: Grey Empty weight: 500 kg - Year: 1970 - Serial number: CH - Control: Conventional Dedpozry I Aofx Apmekw - Motor power: 1.4kW - Transport dimensions: 1400mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, axle configuration: 3 axles, first registration: 04/2018, color: other, Year of construction: 2018 Empty weight: 6.939 kg Dodpev Icbnefx Apmokw The 2018 Nordic S340 3 Axle Curtainsider comes with a sliding roof, new tilts, and a galvanized chassis. It's equipped with SAF Intradisc axles and boasts tire conditions of 9 mm on the left and right of the first and third axle, with the second axle tires at 11 mm. This model is highlighted for its anti-theft features and carries the Code XL certification, ensuring high standards of security and durability. Priced at €18,750 excluding VAT. Tire profile dept: Axle 1: left 9 mm right 9 mm Axle 2: left 11 mm right 11 mm Axle 3: left 9 mm right 9 mm

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, punching force: 18 t, working range: 30,001,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, Very well maintained and fully serviced used Large format Trumpf 3000 cnc punch press for sale Manufacturer TRUMPF Type TruPunch 3000 (S11) Year 11/2012 Working area 3000 x 1500 mm - without reposition Working range on cross-side (X-axes) 3000 mm Working range along (Y-axes) 1600 mm Djdpoxrnggefx Apmokw Large throat 1600 Complete with multi tool capability Type S11 Video available upon request

Condition: used, axle configuration: 3 axles, first registration: 08/2018, color: other, Year of construction: 2018 Empty weight: 6.939 kg Dsdpfx Aov Icbbepmskw The 2018 Nordic S340 3 Axle Curtainsider, priced at €18,750 without VAT, features a sliding roof, new tilts, and a galvanized chassis. It is equipped with SAF axles, air suspension, disc brakes, and meets the Code XL for anti-theft. Tire profile dept: Axle 1: left 4 mm right 4 mm Axle 2: left 1 mm right 1 mm Axle 3: left 7 mm right 4 mm