Used Agiecut 150 Hss for sale (10,057)

Condition: excellent (used), Year of construction: 2009, drilling depth: 350 mm, workpiece weight (max.): 1,600 kg, table load: 1,600 kg, Deep hole drilling machine Mollart - LD8 - 150 Pellet Die Number of Spindles 8 Gun Drilling Diameter Range 1.5mm-10mm (Per Spindle) Maximum Drilling Depth 150mm Drill Spindle Stroke 350mm Dsdpfx Absyilgdjajkn Pellet Die Diameter 500mm-1550mm B-Axis Accuracy +/- 6 Arc Seconds Y-Axis Vertical Travel 400mm Gun Drill Speed Range 0-14,000 RPM Max. drill Ø steel 1.5 - 10 mm Drilling depth 350 mm Table load 1600 Speeds / ranges 14000 Rpm Dimensions (Estimate) Length 4500 mm Width 4500 mm Height 2300 mm Weight 12000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Manufacturer: POREBA Type: TPK 90 / 110 Year of manufacture: 1994 Swing steady 1 is 150 mm Swing steady 2 is 350 mm Swing steady 3 is 500 mm 3 units suitable for TPK 90 (or with spacers TPK 110) Spacers are not included 2nd tool post to be mounted on slide Specifications Metric US Standard There are (still) no specifications for this machine. Dimensions (Estimate) Length Dkedpfx Abowrrbkoaen 1200 mm Width 800 mm Height 1000 mm Weight 1800 kg Please note: The information on this page has been obtained by us to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contract terms. We recommend you check all important details.

Condition: good (used), travel distance X-axis: 12,000 mm, travel distance Y-axis: 7,300 mm, travel distance Z-axis: 3,000 mm, total length: 30,000 mm, table length: 12,000 mm, table width: 4,730 mm, total width: 12,000 mm, total height: 10,475 mm, table load: 250,000 kg, overall weight: 400,000 kg, Make : Waldrich - Siegen - Typ : PF-F-150(1)-530/400 - No. : 11.093/0 - Age : Overhault 2004 ( Euro 2.2 Mil) X Travel : 12.000 - Y Travel : 7.300 - Z Travel : 3.000 - W Travel : 4.000 - Between column : 5.000 - Table width : 4.730 - Table length : 12.000 - Table load : 19 t / mtr. Ca. 250 ton - Table feed : 10.000 mm/min. - W axis : 3.000 mm/min. - T axis : 6.000 mm/min. - Cross adj. milling head : - Vert. adj. cross rail : - Horizontal hydrostatic spindle ram - Milling spindle Ø : 560 - Milling tool taper : iso 60 - C axis feed : 5.000 mm/min. - Milling motor : 90 kW - Spindle speed : 2.500 R/pm - Z axis stroke : 3.000 - Z axis feed : 2.000 mm/min. - Milling Küma Angle head WF2 90 kw- 450 - Milling Küma Uni. UB1D 60 kw - 2400 - Milling Küma Fixed GB1D 90 kw- 2400 - Milling Küma Angle head WF1? - Electric requirement : 3 x 400 V / 50 Hz - Power requirement : 600 kVA / 630 Amp - Capacity 4.000 L coolant true spindle 20/40 Bar Dodeytrxkjpfx Abaokn Machine is rebuild in 2004 by Schiess Bed – Table assembly group: * Renewal of sliding lining * Grinding of guideway * Renewal of table drive * Direct linear measuring syst. * Hydrostatic Portal and cross rail: * Modification of adjusting spindle trape Zoidal spindle was recplaced with ball screw * Direct linear measuring syst. * New drive motors for relization of higer speed on feed axes of milling support. * New milling support with hydrostatic guideways Electric system: * Complet elctric cabinet switchgear * Complet new wire * Siemens Sinumrik 840 D in 6 axis !! Equipment / parts : * Complet new raumag janich covers * Complet new double chip conveyor * Complet with big tooling packet * Complet with big mounting equipment - Under power in Europe - Free directly - Controlled axis X / Y / Z / W / C / B axis - Over all height : 10.475 mm - Over all width : 11.934 mm - Over all length : 30.000 mm - Total weight : ca. 400.000 Kg Rebuild in 2004 for EUR 2.200.000 !This CNC Waldrich Portal milling machines was used in the Energie Field for steam turbien case machining. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW with 4-roller feed, fixed speeds. Speed extensions. Height of worktable: 920 mm. Spindle tilting: -10° + 45°. Max. spindle projection above table: 175 mm. Spindle speeds: 3250/6500-5000/10000 rpm. Max. tool diameter: 250 mm. Weight: approx. 950 kg. Location: Nattheim. Dkjdpfx Aew Enw Iobaen

Condition: used, Year of construction: 1991, Pressing force 1,500 kN Adjustable stroke 20 - 132 mm Ram adjustment max. 90 mm Stroke rate 50 / 75 strokes/min. Further data and images available upon request Used, the press was completely disassembled Not operational and requires mechanical and electrical overhaul Press is currently mechanically reassembled Dkjdpfsrm Nqmsx Abaon

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 Dsdpfx Asy Nytpebaskn If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, functionality: fully functional, Machine: Agathon 150 A Tool Grinding Machine Manufacturer: AGATHON (Switzerland) Grinding/Working Data • Grinding wheel diameter: 150 mm • Grinding wheel width: 20 mm • Bore (inner diameter of grinding wheel): 20 mm • Spindle speed: up to approx. 2,500 rpm • Tool clamping range: • Width: approx. 32 mm • Height: approx. 32 mm • Clearance angle adjustment / orthogonal clearance angle: up to approx. 26° Electrical Data • Supply: 3-phase 380 V, 50 Hz • Power: approx. 1.0 HP (~0.7–1.0 kW, depending on source) Mechanical/Dimensional Data • Machine weight: approx. 225 – 300 kg (depending on version/equipment) Dkodpfx Abjypb T Aeasn • Dimensions: • Length: approx. 820 – 850 mm • Width: approx. 564 – 620 mm • Height: approx. 1,215 – 1,200 mm

Condition: excellent (used), machine/vehicle number: 511.1012.471, Cutting Area Length: 150 cm Max Cutting Thickness: 0,6mm Dedoxugxtspfx Abaskn Equipment / Additional information: ELECTRO TRIM professional electric paper cutter. Made in Italy, realized to cut various materials such as paper, acrylic film, photo-film, photographic paper. Electro Trim is equipped with a hardened steel rotary blade cutting head, mounted on a sliding tube. The metal parts are powder-coated which ensure high resistance to cuts and scratches. The standard model includes a support for positioning on the ground with adjustable feet, the paper collection curtain for paper waste and a lamp that lights up the cutting area.

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 3.65-00001, WITH COUNTING STATION Wiring Diagram No.: 8.62-00001 Equipment / Additional information: Consists of: -Infeed conveyor Dksdpfx Aopr Ut Nsbajn -Machine -Counting station -Discharge belt

Condition: good (used), Year of construction: 2002, FOR SALE Double Crank Press ARISA 630 Tons Brand: ARISA (Spain) Model: S2-630-350-150-ES Year of Manufacture: 2002 Type: Double crank mechanical press (S2) – High performance Technical Specifications (Certified Data): This press is a heavy-duty production unit designed for extremely high precision on large workpieces. Nominal Force: 630 tons (6,300 kN) Table Dimensions: 3,500 mm x 1,500 mm Dedpfxsy Sl Rlj Abaekn Slide Dimensions: 3,500 mm x 1,500 mm Slide Stroke: 200 mm Slide Adjustment: 150 mm Working Speed: Variable from 20 to 50 strokes/minute Maximum Force Point: 13 mm before the bottom dead center Electrical & Mechanical Specifications: Motor Power: 92 kW Total Machine Weight: 145,000 kg (145 tons) Striking Energy: Ideal capacity for deep drawing and progressive cutting applications Clutch/Brake System: Pneumatic (required pressure 5.5 – 6 bar) Balancing: Adjustable pneumatic counterbalance Power Supply: 380 V Key Features: Large Working Area: 3.5-meter table allows for complex or multiple tooling setups S2 Stability: Double crank design ensures uniform pressure distribution, preventing slide tipping Condition: 2002 machine compliant with modern safety and control standards.

Condition: used, Year of construction: 1999, dimensions of saw-band 4200 x 34 x 1,1 mm Dksdpfx Aboyv Nk Deasn saw band length 4200 mm cutting speed 15 - 150 m/min capacity 90 degrees: round 325 mm capacity 45 degrees: round 300 mm capacity 90 degrees: flat 500 x 300 mm capacity 45 degrees: flat 300 x 300 mm cutting speed 15 - 150 m/min Working height 750 mm dimensions 1300 x 2050 x 1400 mm

Condition: used, Year of construction: 2015, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2015 Control : Heidenhain iTNC 530 Speed : 18000 rpm Movement X/Y/Z : 600/500/500 mm Tool holder : SK 40 Spindle: Technology:Motorspindle Speed:18.000 rpm Power (max.):35 kW Torque (max.):130 Nm Taper:SK 40 Dkodpszbzbqsfx Abaon NC-Swivelroundtable: B-Axis:-5°/+110° C-Axis:360° Clampingsurface:ø630 x 500 mm Tableloading (max.):400 kg Palletclamping:Zeroclamp system, EROWA Automation: Technology:DMG Palettensystem PH 150-8 Palletsize:360 x 360 mm Number of pallets:8 pieces In general: Toolmagazine:120 Stations Rapid travers in X/Y/Z:50 m/min Equipment/Accessory: Positionsensor:Direct Scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbelfilter and High-pressure, 40 bar Workpiecemeasurement:Touch probe, Heidenhain TS 649 Toolmeasurement:Laser, BLUM Oilmistseparation:Electrostatic extraction, W+W EL-FI 1000 Processobservation:Operation mode 4 Further Equipment:Visiport, Rinsingpistol Further Accessory:Misc. used toolholder and 8 pieces vices, Lang Makro Grip

Condition: used, Year of construction: 2008, power: 27 kW (36.71 HP), input voltage: 400 V, input current: 44 A, temperature: 200 °C, inner dimension length: 1,100 mm, inner dimension width: 1,600 mm, inner dimension height: 1,500 mm, overall weight: 3,500 kg, number of chambers: 1, Equipment: CE marking, documentation/manual, Chamber oven Vötsch for components containing solvents Usable dimensions: 1600 x 1100 x 1500 mm (width x depth x height) Rated temperature: 200 °C Maximum temperature: 250 °C Maximum permissible solvent quantity according to EN 1539 at rated temperature: 38 g Connected load: 30 kVA Dksdpfx Ajy U Uzxebaen Rated power: 27 kW Usable volume: 2.78 m³ Steam space: 4.5 m³

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Dkodpfxsfxygws Abasn Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: excellent (used), Year of construction: 2004, CATALOG NUMBER 7880 Technical data: - max cutting height: 150mm - max element width: 500mm - working width of shaft with saws: 400mm - shaft diameter: 70mm - max saw blade diameter: 450mm - from above: - anti-kickback devices - 2 toothed feed rollers – pneumatically pressed - from below: - slip roller - anti-kickback devices - 2 toothed feed rollers - saw shaft - 2 toothed feed rollers - stepless feed speed adjustment via inverter - feed motor: 3kW - main motor: 55kW - overall dimensions L/W/H: 2120x1600x1630mm - weight approx. 2750kg Dodpfx Ajzcck Ajbaskn ADVANTAGES – Polish-made – robust construction – Used machine, in very good condition Net price: 55,900 PLN Net price: 13,310 EUR at 4.20 EUR exchange rate (Prices may vary with greater exchange rate fluctuations)

Condition: as good as new (ex-display), Year of construction: 2026, High pressure cleaning unit, high pressure flushing unit, high pressure built-in flushing unit on hot galvanized and painted high quality steel frame with forklift lugs suitable for installation in company vehicles. PTC Salmon similar but no Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/150 | 60l/min. at 150bar | Engine: Kohler 19kW Salmon 45/200 | 45l/min. at 200bar | Motor: Kohler 19kW Salmon 35/250 | 35l/min. at 250bar | Motor: Kohler 19kW Salmon 30/300 | 30l/min. at 300bar | Motor: Kohler 19kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1.250x1.200 mm. dimensions with 400l water tank LxWxH: ca. 1.220x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 1.670x1.250x1.200 mm Empty weight without water tank: approx. 370 kg Empty weight with 400l water tank: approx. 400 kg Empty weight with 800l water tank: approx. 430 kg HIGH PRESSURE PUMP: - Manufacturer: HPP - Model: CLW - Flow rate: 30 - 60 l/min. - Working pressure: 150 - 300 bar MOTOR: - Manufacturer: Kohler - Model: KDW 1003 - Fuel: Diesel - Max power: 26 hp (19 kW) CONTROL PANEL: - Start button - Operating hours counter - Electronic fuel gauge - LED indicators for oil temperature, low lubrication oil pressure, clogged air filter, RPM, alternator and spark plugs - Emergency stop button ELECTRICAL OPERATION: - On / off hydraulic hose reel; - On / Off bypass; - Speed control +/-; - Emergency stop button; - Switching to radio remote control; INSTALLED ALARM: - Low water protection against dry running of the high pressure pump with automatic shutdown function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH PRESSURE HOSE REEL: - Type: electric hose reel - Material: stainless steel - Capacity: max. 80 m ½" u. 80 m 3/8" high pressure hose. - Hose: 80 m ½" high pressure hose (included) - Hose guide: manual LOW PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: stainless steel - Capacity: max. 35 m ¾" low pressure hose - Hose: 35 m ¾" low pressure hose (included). WATER FILTER: - With washable cartridge and drain valve . - Filtration degree: 50 mesh INCLUDED: - Multifunction radio remote control IMET; - On / Off motor; - On / Off Bypass; - Speed control +/-; - Winding / unwinding hydraulic hose reel; - Emergency stop button; - Battery charger for radio remote control; Dksdpsiky H Sofx Abaen - 400 or 800 l (with steel frame) polyethylene water tank; OPTIONAL ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½" high pressure hose; - 50, 60 or 80 m 3/8" high pressure hose with G3/4" connection; ACCESSORIES ON REQUEST: - Kit STORZ for connection to the water hydrant; - Kit UNI 45 ; - Version with 2 HD reels; - Mobile hot water generator 10 kW - 12 VDC; - Kit high pressure spray gun, swivel and quick coupling; - Kit high pressure lance with flat jet nozzle 15° / rotating nozzle; - Kit lance for high flow; - Kit rotary nozzles; - Kit double head nozzles; - Kit water sand lance; - Kit detergent dispenser; - Step cleaner; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; Other accessories on request

Condition: used, mileage: 205,504 km, power: 110 kW (149.56 HP), first registration: 02/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, emission class: euro6, loading space length: 4,210 mm, loading space width: 2,140 mm, loading space height: 2,090 mm, Equipment: ABS, air conditioning, had accident, soot filter, * Vehicle No: - 11 * Euro 6 green environmental badge * Ducato 2.3 l with 110kW * Maxi box body with rear portal doors * L = 4.21m W = 2.14m H = 2.09m * Air conditioning * Gross vehicle weight: 3500 kg, payload: 1110 kg * 3 seats * Electric windows * Electric mirrors * Central locking * Airbag * ABS * ASR * German vehicle * Original mileage * !!! Engine runs unevenly and smokes !!! ---- -> Please note that viewings are only possible by prior appointment. Thank you for your understanding. Dksdpoxz Sugofx Abaen -> Sale is only to traders or for export. The above data, photos, and equipment list serve only as general vehicle identification and do not constitute guaranteed characteristics in the legal sense of a sale! All information/equipment details are provided WITHOUT GUARANTEE. Subject to change, prior sale, and errors! The specification list does not form part of the contract and must be checked in detail by each prospective buyer on site at the vehicle before purchase. Complaints made at a later date will not be accepted.

Year of construction: 2002, condition: refurbished (used), I offer on behalf of a customer and on his account a VOUMARD 150 CNC L 1300 for sale. The machine is equipped with: 4-fold turret 3 x inside, 1x empty space for outside pneumatic swivelling dresser diameter max 350 mm length max 1.300 mm CNC Fanuc 32 i very extensive accessories among others several hydr. steady rests, power chucks etc. View under "Documents Machine can be inspected under power at the owner's premises. The machine was overhauled in 2016 In addition, I offer 2 pieces of grinding spindles Voumard VMX 90 A, once new, once reconditioned. The can also be purchased seoerat Dksdpjgigv Dofx Abaen

Condition: used, Year of construction: 2006, from government authority used, top condition, low operating hours Make: J. Neu GmbH Model: Piccolo 150 Year of manufacture: 2006 Machine No.: 0606648 CE type-tested GS-tested for wood dust Motor 5.5 kW Djdpfx Absy H N T Hjaekn Cutting height approx. 150 mm Cutting width approx. 675 mm Blade diameter approx. 500 x 30 mm Motor brake Original price approx. 8,000.00 EUR Extraction connection D 100 mm Space required approx. 800 mm x 800 mm Storage location: 97447 Gerolzhofen, free loaded, unpacked Transfer as is, as inspected No warranty or guarantee

Condition: used, Year of construction: 1991, width of the strips 150 mm band length 2.000 mm Dkedpfxsy Ty A Ee Abaon motor 400 V loading area 450 x 160 mm total power requirement 4,0 kW dimensions of the machine ca. 1,10 x 0,70 x 1,15 m - Serial-No.: 200.184

Condition: used, Year of construction: 2017, The Zechini ESB 500 is a high-performance automatic box wrapping machine engineered for the efficient production of premium rigid boxes. Designed to meet the exacting standards of luxury packaging industries, this machine ensures consistent quality, precision finishing, and streamlined workflow. The ESB 500 automatically covers pre-assembled cardboard cores by precisely folding, tucking, and overlapping wrapping materials onto the box structure, delivering a flawless external finish. Technical specifications: Box Height : 20 – 150 mm Box Width : 95 – 450 mm Box Length : 95 – 500 mm Board Thickness : 1,2 – 3 mm Max. Mechanical Speed : 400 cycles/h. Zechini Roby Junior 2 Casemaker Roby Junior 2 is compact and versatile semi-automatized case maker suitable both for short and medium runs and can produce a gluing unit integrated in the machine in order to save floor space and the walking effort. Usually used with hot, animal glue, the unit can also be used with cold, vinyl glue. Technical specifications: Max. Board Size : 500 x 700 mm Dkodpfxjy I Rnbo Abasn Min. Board Size : 140 x 140 mm Max. Cover Material Size : 540 x 740 mm Board Thickness : 1,5 – 3 mm Max. Mechanical Speed : 250 cycles/h. Zechini CT 150 Corner Tape Machine The CT 150 is the machine to close the corners of the box by positioning heat-sealing stripes. The machine places the heat-sealing adhesive onto the corners to form the box. Technical specifications: Max. Box Height : 150 mm Min Box Size (L x W x H) : 60 x 60 x 10 mm Max. tape Width : 22 mm Max. Mechanical Speed : 300 cycles/h.

Condition: good (used), Code: 0402 Brand: SCM Model: T 150 E - CE Standard Automatic electronic spindle moulder with tilting spindle, complete with feed, for joinery, furniture, custom-made furniture, wooden joinery, doors, timber structures, plastics and composite materials – CE Standard Electronic control for vertical positioning and spindle tilting Inverter: electronic speed variator with display from 1000 to 10000 rpm Reversible rotation Manually adjustable “FAST” sector work table Guide - router hood with easy release mechanism operated by a crank handle Technical data: Work table dimensions 2500 x 800 mm Removable workpiece support Work table height from ground 935 mm Spindle tilting -10° to +45° Spindle diameter 40 mm Max profiling tool diameter 250 mm Max tenoning tool diameter 300 mm Main motor 7,5 Hp Feed roller support device with manual vertical and horizontal movement 3-roller automatic feed MAGGI N° 2 suction inlets diameter 120 mm Overall dimensions mm 2500 x 1350 x 1900 m Dkjdpjzb Eqcjfx Abasn Weight kg 1000

Year of construction: 2007, condition: used, Colour: Grey Empty weight: 500 kg Dimensions (LxBxH): 270 x 70 x 246 cm - Year: 2007 - Documentation available: No - CE marking present: Yes Dksdpfxjwh Nfrs Abasn - CE certificate present: No - Serial number: 13.02.01.10372/1 - Transport dimensions: 2700mm x 700mm x 2460mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: new, functionality: fully functional, machine/vehicle number: NEW-7, empty load weight: 383 kg, maximum load weight: 1,617 kg, overall weight: 2,000 kg, axle configuration: 1 axle, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS PL 276 150 2000 2 NEW VEHICLE Internal dimensions: 276cm x 150cm Side wall height: 30cm Load platform height: 65cm Gross weight: 2000kg Payload: 1617kg Braked tandem trailer Overrun brake and parking brake by KNOTT 2 axles, each with 1350kg brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side walls with tension latches Side walls fold down and are removable on all sides 15mm thick, non-slip, durable phenolic plywood floor Automatic jockey wheel with 400kg drawbar load 8 noise-dampening lashing rings, each with 800kg tensile strength Reinforced 13" C tyres with steel valve M+S tires Net/rope hooks on the frame 13-pin plug LED front marker lights Rear lamps with reversing light, fog lamp, and triangular reflector OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026: - 100km/h equipment (shock absorbers) - Spare wheel with holder - Without side walls (discounted price) - Side wall extension to 35cm - Black Edition (powder-coated side walls and wheels in black) - Loading ramps - Steel plate on floor panel Dedpjrk It Sjfx Abajkn - Full LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Mesh sides in various heights, also closed - Additional 30cm side walls with tension latch - Flat tarpaulin with or without bows - High tarpaulin 160cm or 180cm Other accessories available on request! Plus delivery to Gera and vehicle documents: €200 net Images for illustration only; may show optional extras at extra cost. Haven’t found the right trailer yet? We always have 50–100 vehicles in stock and immediately available for collection. Our workshop is open weekdays from 8:00 to 17:00 for all kinds of repairs. Axle repair specialist, also for caravans. Wide range of rental trailers. Additionally, we offer a large selection of spare parts and accessories for trailers of all brands. Get professional advice by phone, visit our website, or stop by in person.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-15, empty load weight: 449 kg, maximum load weight: 901 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,560 mm, loading space width: 1,340 mm, loading space height: 1,500 mm, loading space volume: 5 m³, suspension: other, tire size: 185 R 14 C, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS GO 256 134 150 1350 1 Box Trailer NEW VEHICLE Internal dimensions: 256cm x 134cm Internal height: 150cm Loading platform height: 54cm Gross vehicle weight: 1350kg Payload: 901kg Braked single-axle low-loader Overrun brake and handbrake by AL-KO Dkjdpeghpb Sefx Abaen 1350kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame 15mm phenolic plywood sidewalls and roof Interior: grey Exterior: white GRP layer Ideal base for wrapping or signage Rear double doors made of phenolic plywood with lockable latch Water drainage channel above the rear doors 15mm thick, slip-resistant and durable phenolic plywood floor Jockey wheel Integrated floor-mounted airline lashing rail (600kg tensile force) 4 moveable lashing points for airline rail LED interior light 14" reinforced C-rated tyres M+S tyres 13-pin plug Front marker lights Rear lamps with reversing light, rear fog lamp, and triangular reflector 2x wheel chocks OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - Change internal height to 138cm or 180cm - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - Loading ramps - Side door left or right, 72cm - Ramp instead of double doors, 750kg incl. lifting aid - SARIS alloy wheels - Full LED lighting - Anti-theft device - Anchor rail with locking bar - Rear support stands Further accessories available on request! Plus shipping to Gera and vehicle registration document: €250 net Pictures are for illustration purposes and may show optional accessories subject to extra charge. Didn't find the right trailer? We always have 50–100 vehicles in stock and ready for immediate collection. Our workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist for axle repair, including for caravan trailers. Large selection of rental trailers available. We also stock a wide range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or come by directly.