Used Geberit Esg for sale (57)

Condition: used, Electrofusion Welding Machine, Electrofitting Welder, Welding Unit, Used Machine Fpjdsznk Nvopfx Anljk Manufacturer: Geberit Model: ESG 40/200 Overall Dimensions: Width: 220 mm Depth: 170 mm Height: 170 mm

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Fsdpfjuzn Nnjx Anlepk Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: E1TAH0029, grinding length: 600 mm, grinding width: 300 mm, grinding wheel diameter: 304 mm, table length: 600 mm, table width: 300 mm, TECHNICAL DETAILS Grinding length max.: 600 mm Grinding width max.: 300 mm Distance from table surface to spindle center: 585 mm Grinding wheel dimensions: 304 x 31.75 x 76.2 mm Table and magnetic plate Table size: 600 x 300 mm Magnetic plate: 600 x 300 mm Axis movements Hydraulic table longitudinal movement: 650 mm Automatic transverse movement: up to 310 mm Machining: fully automatic in 3 axes Spindle and power Grinding spindle power: 3.7 kW Spindle speed, frequency inverter max.: 2,100 rpm Machine bed: 780 x 750 mm MACHINE DETAILS Fjdpjzgux Ssfx Anlepk Dimensions and weight Dimensions: approx. 2,700 x 1,600 x 1,850 mm Machine weight: approx. 1,990 kg EQUIPMENT Fully automatic machining in 3 axes Touchscreen control panel with program management Automatic central lubrication Cooling system with automatic paper filter Enclosed splash guard with lighting Electronic handwheel

Year of construction: 2008, condition: ready for operation (used), Main Drive Number of axis 3 Fjdpfxjx D H Ero Anlopk This 3-axis EASTAR ESG-1640ASD II surface grinding machine was manufactured in 2008. It features a substantial work plane of 400 x 1000 mm, ideal for various grinding tasks. If you are looking to get high-quality grinding capabilities, consider the EASTAR ESG-1640ASD II machine we have for sale. Contact us for more information. Application Types Grinding

Condition: new, Year of construction: 2025, operating hours: 50 h, functionality: fully functional, grinding length: 500 mm, grinding width: 300 mm, total height: 585 mm, total length: 600 mm, feed length X-axis: 630 mm, feed length Z-axis: 360 mm, workpiece weight (max.): 300 kg, grinding height: 400 mm, grinding wheel diameter: 355 mm, table length: 600 mm, table load: 300 kg, table width: 300 mm, grinding wheel width: 50 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,800 rpm, overall weight: 3,600 kg, grinding spindle motor power: 7,450 W, power: 11.93 kW (16.22 HP), space requirement height: 2,900 mm, space requirement length: 3,100 mm, space requirement width: 3,300 mm, Equipment: documentation/manual, rotational speed infinitely variable, Machine options: Mitsubishi control system Cooling with automatic paper filtration and magnetic separation, 160-liter capacity Fpodoy Rln Uspfx Anlsk 1 spare flange Magnetic chuck controller with demagnetizing function Dynamic wheel balancing SPINFLO spindle cooling Oil mist extraction Transformer Rotary dresser Standard dresser Hand controller LED work area lighting Warning beacon

Condition: used, maximum load weight: 36,140 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 04/2026, next inspection (TÜV): 04/2027, Equipment: ABS,

Condition: used, maximum load weight: 35,480 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 05/2026, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from Equipment: Chassis: Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads. Underride guard, width approx. 700 mm, outer frame as a UNP profile, wear plate approx. 8 mm, neck height at the front approx. 130 mm. Coupling device: 2-inch kingpin. Underrun protection: bolted design, according to EC. Side underrun protection: according to EC, made of aluminum profiles, anodized. Saddle supports: 2 x 12 t saddle supports with leveling foot and single-sided operation on the right-hand side. Axles: 3 x 9 t air suspension axle unit, disc brakes 22.5". Total stroke approx. 180 mm, raising and lowering device via rotary slide valve. Braking system: Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlockable coupling heads permanently mounted on the front crossmember, without connection line to the tractor unit. Tires: 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120, manufacturer of our choice. Tire pressure monitoring system (TPMS) via CAN bus system of the EBS. Fenders: according to EC. Spare wheel holder: none. Load securing: - 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t - 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t - In the outer frame, holes for attaching lashing straps are provided every approx. 400-600 mm. Front wall: Reinforced steel construction, fixed, approx. 1,400 mm high. Internally lined with approx. 9 mm screen-printed material (approx. 1,250 mm high). Floor: approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanized omega steel profiles. Lighting system: according to EC, 24 Volt, with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. Lane departure warning lights LED. 1x15- and 2x7-pole plug connections on the front crossmember. Equipment: - 2 wheel chocks with holder - Warning signs ECE 70 - Holder for rotating beacon, incl. rotating beacon - 2 rubber impact buffers at the rear - Access ladder at the rear right, foldable and extendable (without platform) - 1 open box made of perforated sheet, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles. Painting: Front wall: RAL 3002 carmine red. Chassis: hot-dip galvanized. Outer frame: hot-dip galvanized + RAL 3002 carmine red. Center beams: RAL 3002 carmine red. SSV: Aluminum, anodized. Underrun protection: white (RAL 9016 traffic white). Components: galvanized/KTL black. Rims: silver. Outline marking: complete, yellow. Incl. special accessories. First axle liftable, with fully automatic, load-dependent lift control. 10 pairs of stake pockets in the outer frame, evenly distributed. 4 rows of stake pockets transverse to the loading area. 20 stakes made of galvanized tube 80/50, total length approx. 1,200 mm. Inside the front wall, a magazine for 20 stakes. 5 x 25-mm side boards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stakes. Side board and stake magazine: under the chassis, left and right, sliding rails for side boards and stakes. Container locks for 1 x 40' and 2 x 20' containers, rear-flush. Container locks for 1 x 20' container in the center. Work lights on the lamp carrier (switched via reverse gear). 2 Fpedpfxjzrq U Hj Anlsk

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Fsdpfx Aoy N Duqonlspk Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: used, axle configuration: 2 axles, first registration: 08/2021, Equipment: ABS, 2-axle semi-trailer, low-loader, Manufacturer: ES GE 2STL, first registration: 08/2021, 2 steerable axles, Fpjdjzml Abepfx Anlek Access ramps, powerful winch, toolboxes, remote control, and more. In very good condition. Price: €41,900.00 plus VAT (19%). Subject to errors and prior sale.

Condition: used, Year of construction: 2013, functionality: fully functional, total width: 1,000 mm, total length: 2,500 mm, total height: 1,020 mm, Optical table Perforated plate made of stainless steel (11 cm) Fsdpszrfl Hefx Anljpk Frame: 80x82x155 cm (H x W x L)

Year of construction: 2020, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 4760025, MACHINE DESCRIPTION Special drive concept Multi-axis Profiroll CNC/AC control Two-slide design Graphical user interface Process visualization Data management Operator guidance Integrated workpiece handling The PRI 120 CNC/AC is a newly developed internal gear back-rolling machine for rolling back angles onto the tooth flanks of existing internal gears. The innovative machine concept is based on over 60 years of experience in the development and manufacture of thread, profile, and gear rolling machines in Bad Düben. The machine’s base frame is a ribbed, torsionally rigid machine bed made of cast iron, which minimizes vibrations. In particular, the use of state-of-the-art proportional valve technology in conjunction with the PROFIROLL CNC control enables optimal process control of the rolling process. The control system, in combination with the backlash-free roller guide system, guarantees the highest precision and repeatability in the positioning of the rolling slide and, thus, of the tool. The innovative handling system, in conjunction with the rolling process, allows for the shortest cycle times. TECHNICAL DATA / PARAMETERS Workpiece diameter min./max. (mm) = 60/120 Workpiece width, min./max. = 10/40 Tool mounting length (mm) = 50 Connection value (kW/A) = 16/63 Width (mm) = 3600 Depth (mm) = 3600 Fjdpfsznkz Sex Anlepk Height (mm) = 2680 Weight (kg) = 5700

Condition: new, maximum load weight: 35,510 kg, overall weight: 43,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross members, designed for high point loads. Underride guard, width approx. 700 mm, outer frame as UNP profile, wear plate approx. 8 mm, goose neck height front approx. 130 mm Fifth wheel coupling: * 2-inch kingpin Underrun protection: * Bolted design, according to EC Side impact protection: * According to EC, made of aluminum profiles, anodized Kingpin supports: * 2 x 12 t kingpin supports with leveling foot and one-sided operation on the right side Axles: * 3 x 9 t air suspension axle, manufacturer SAF, disc brakes 22.5" * Total stroke approx. 180 mm, raising and lowering device via rotary slide valve Braking system: * Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlockable coupling heads permanently mounted on the front cross member, without connection line to the towing vehicle Tires: * 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120, manufacturer of our choice * Tire pressure monitoring system (TPMS) via CAN-bus system of the EBS Fenders: * According to EC Spare wheel holder: * None Load securing: * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * In the outer frame, holes approx. every 400-600 mm for attaching lashing straps Fpedpfx Anszhd Ncjljk Front wall: * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm screen-printed flooring (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame with galvanized omega steel profiles Lighting: * According to EC, 24 volts, with multi-chamber lights, LED side marker lights, LED position lights white front, LED outline lights rear, license plate lights * Lane-keeping lights LED * 1x15- and 2x7-pole connector sockets on the front cross member Equipment: * Warning signs ECE 70 * Holder for rotating beacon, including rotating beacon * Foldable and extendable access ladder at the rear right (without platform) * 1 open box made of perforated sheet metal, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Painting: * Front wall: RAL 5010 azure blue * Chassis: Hot-dip galvanized * Outer frame: Hot-dip galvanized + RAL 5010 azure blue * Crossbars: RAL 5010 azure blue * Kingpin supports: Aluminum, anodized * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanized/KTL black * Rims: silver Accessories: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of crossbar pockets in the outer frame, evenly distributed * 4 rows of crossbar pockets transverse to the loading area * 20 pieces of crossbars made of galvanized tube 80/50, total length approx. 1,200 mm * Inside on the front wall, a magazine for 20 pieces of plug-in crossbars * 5 x 25 mm side boards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable crossbars * Side board magazine under the chassis left and right * Sliding rails for side boards * Container locks for 1 x 40" and 2 x 20" containers, flush at the rear * Containe

Condition: new, maximum load weight: 14,910 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 6,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis frame: * Welded construction made of high-quality steel with cross members and an outer frame. Ramp storage: * Ramp storage between the longitudinal beams. Under-run protection: * Rigid under-run protection in accordance with ECE R58-03 * Side and under-run protection in accordance with EC regulations. Front support: * Front support with two-stage crank supports (2 x 12 t). Rear support: * Rear support with lockable drop supports. Axles: * 2 x 10t SAF axles with drum brakes, low-maintenance air suspension axle, lifting and lowering device with a total lifting stroke of approx. 180 mm, asbestos-free brake pads. Axle with a load capacity of 10,000 kg. * Compressed air tank, steel * Wheel fastening by center centering Fedpjzgqncjfx Anlspk Tires: * Tires 235/75 R 17.5, on steel disc wheels, 8-ply, manufacturer of our choice * Tire pressure monitoring system, which indicates low tire pressure. Splash guard: * Plastic mudguards, splash flaps Load securing: * 6 pairs of lashing recesses designed for 8 t, evenly distributed on the outer frame * Beveled and perforated outer frame for attaching lashing hooks when the side boards are closed * Stake pockets: 3 pairs of welded stake pockets, internal dimension for stakes approx. 80 x 50 mm, evenly distributed. Braking system: * Automatic, load-dependent, two-circuit pneumatic braking system in accordance with EC regulations with spring-loaded parking brake (incl. 1 release valve), EBS connections for air (red/yellow), corrugated flexible lines for trailer. Floor: * Hardwood floor approx. 30 mm, with Z-profile boards. Front wall: * Designed as a removable side board, approx. 600 mm high. Lighting/electrical system: * Electrical system: 24-volt lighting system in accordance with StVZO * Multi-chamber rear lights, completely LED, with integrated ballast and flashing side marker lights. * On the trailer, additional position lights. * Position lights at the front, white (required for approval in EU countries and Switzerland). Electrical system: * Trailer connections: 2x7-pole * Trailer connection: 1x15-pole * Mounting plate for supply lines on the front cross member, lines permanently mounted, without separate connections, supply connections on the left. Accessories: * Wheel chocks in accordance with StVZO. * Plug-in revolving warning light at the rear. * Delivery of an additional 40 mm towing hitch (GVWR max. 13,500 kg). Painting: * Coating of undercarriage: galvanized + powder-coated * Chassis frame with high-quality hot-dip galvanizing and subsequent powder coating for optimum corrosion protection; the surface may show the ripple structure of the hot-dip galvanizing. * Coating of body parts: standard Color: * RAL 3002 carmine red * Center and corner profiles: KTL + powder coating: RAL 3002 carmine red * Side boards: RAL 3002 carmine red * Drawbar: hot-dip galvanized * We would like to point out that, due to the size of the chassis and the selected coating process (hot-dip galvanizing), surface imperfections may occur. These include, for example, zinc pimples, run-ons, zinc whiskers, distortion, etc. We have no influence on this, and it will not constitute a legal defect with regard to the appearance at a later date. Contour marking: * Yellow lateral reflective contour marking. * Yellow ref

Condition: new, maximum load weight: 37,350 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous crossmembers for high ground and point load capacity, with a heavy-duty outer frame. * Loading platform at the rear as a steel welded structure with two welded-in tracks made of 5-hole steel sheet (hole pattern System Lohr/Rolfo) with a length of approximately 2,250 mm, hydraulically lowerable by approximately 350 mm. * Integrated loading platform at the rear of the vehicle, approximately 1,500 mm, hydraulically extendable as a steel welded structure with 5-hole steel sheet (hole pattern System Lohr/Rolfo) cover, light fitting, and 2 ramp compartments and ramp supports. * The drive and control of the rear section are provided by an electric hydraulic unit mounted in a stainless steel box on the left of the chassis, with a radio remote control. * Power supply via the vehicle battery of the towing vehicle. * NATO socket on the front wall, without connecting cable to the tractor unit. Fifth wheel coupling: * 2-inch kingpin, replaceable from below. Under-ride protection: * According to EC, permanently mounted. Support legs: * 2 x 12 t support winches with a 2-speed gearbox. Axles: Fedpfxoy Up S Sj Anlspk * 3 x 10 t air-suspended axle unit, manufacturer SAF with disc brake approximately 370 x 45 mm, ABS, wheel connection 10-hole center-mounted ET120, total stroke of the air suspension approximately 200 mm, of which lifting approximately 140 mm and lowering approximately 60 mm, control of the air suspension via hand control with stop function. Steering axle: * 3rd axle as a trailing steering axle with manual and automatic reverse steering lock. Lift axle: * 1st axle automatically liftable, also switchable via operation on the chassis frame or via PIN 12 of the light socket. Tires: * 6 tires, 445/45R19.5, manufacturer of our choice, mounted on rim 14.00X19.5, 10-hole ET120. Fenders: * According to EC, 1/4 PVC fender in front of and behind the wheels of the 1st axle in front and behind, 2nd and 3rd axles in the rear. Tire chock holder: * None Braking system: * Two-line braking system according to EC with EBS, automatic load-dependent control. * Spring brake accumulator as parking brake acting on 2 axles, interlock-protected coupling heads permanently mounted on the front crossmember, without connecting line to the tractor unit. Manufacturer Wabco. Lighting system: * According to EC, 24 volts, multi-chamber rear lights, license plate lights, LED side marker lights, LED position light white in front and LED side marker lights at the rear, 15-pole socket and 2x7-pole sockets permanently mounted on the front crossmember, without connecting lines to the tractor unit. Load securing: * 9 pairs of folding lashing rings evenly distributed, tensile force approximately 8 tons. * 7 pairs of folding lashing rings evenly distributed, tensile force approximately 2.5 tons. * 2 pairs of folding lashing rings at the rear of the vehicle, tensile force approximately 2.5 tons. * In the outer frame, holes for lashing straps at approximately 500 mm intervals. Lashing stakes: * 16 lashing stakes approximately 100/40 mm, approximately 800 mm usable length. Lashing stake pockets: * 8 each on each side embedded in the outer frame. * 4 rows of stake pockets transverse to the loading area. Fl

Condition: used, Year of construction: 2007, Extendable superstructure: Yes Please contact Theo Lelie for more information ES-GE 6.SOU-4H-1N 6 axle semi / stepframe lowloader 12-2007 Airsuspension Last 4 axles Hydraulic steert Extra remote steering (by wire) First 2 Axle’s are lift axles Its own 24V electro-hydraulic powerpack Loadingfloorlenght 11.000 mm + 6.000 mm extendible Width 2.550 mm + side extensions till 3.250 mm Weights in kg 6 x 10.000 kg axle load 25.000 kg fifth wheel load 84.000 kg total weight Ca 17.080 kg own weight Ca 67.920 kg loading capacity Fpedpfx Ajyrtm Honlok ABS

Condition: used, axle configuration: > 3 axles, first registration: 04/2007, total length: 13,400 mm, total width: 2,550 mm, suspension: air, tire size: 205/65R17.5, wheelbase: 9,800 mm, color: white, Year of construction: 2007, Equipment: ABS, Saf axle. 2 x trailing steering axles. Extendable. Lifting roof. Sliding roof. Loading bed length: 910 cm. Fsdpfxsy N Aw Re Anlopk Floor height: 80 cm. Neck length: 390 cm. = Further information = Axle configuration: Tire size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Left inner tread: 30%; Left outer tread: 30%; Right inner tread: 30%; Right outer tread: 30% Rear axle 2: Twin tires; Left inner tread: 30%; Left outer tread: 30%; Right inner tread: 30%; Right outer tread: 30% Rear axle 3: Twin tires; Left inner tread: 30%; Left outer tread: 30%; Right inner tread: 30%; Right outer tread: 30% Rear axle 4: Twin tires; Left inner tread: 40%; Left outer tread: 40%; Right inner tread: 40%; Right outer tread: 40% Weights: Unladen weight: 9,940 kg Payload: 37,660 kg Gross vehicle weight (GVW): 47,600 kg Identification: Type number: 4STL48 / 4 AXLE / SLIDING ROOF / = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT), Russian spoken. We do our best to provide correct information, but no rights can be derived from the information provided.

Condition: used, machine/vehicle number: W09BLH3556EE32123, Year of construction: 2006, Please contact Theo Lelie for more information Fpsdpfx Anjy Dgkqelok

Year of construction: 2018, condition: like new (used), functionality: fully functional, machine/vehicle number: M.66999.999.92, Take advantage of this unique opportunity to acquire an immediately available, like-new machine from the world-renowned premium manufacturer FRIMO. This is a fully assembled and 100% operational special machine for thermoforming/vacuum lamination, which, due to a cancelled project, never went into series production and is therefore in like-new condition. Machines of this type are often found in the premium automotive sector worldwide. Fpjdpfx Aszd Unbsnlok One of the special features of this machine is its large forming area of up to 1,200 x 2,200 mm and its very flexible range of applications, due to its modular design and many special functions. Detailed description: Versatile ECO single-station laboratory machine or ECO single-station in-line machine for series production. Depending on the application, whether as a laboratory machine or for series production in in-line operation, and depending on the type of frame (fixed or adjustable frame), the maximum available forming area is defined. Forming areas: (with currently available frames) In-line operation: 810 x 2,205 mm (min. 465 x 490 mm) Single-station operation: 970 x 1,970 mm (min. forming area, linear: 465 x 490) With newly manufactured frame: Single-station frame, fixed: 1,200 x 2,200 mm & single-station frame, adjustable: 1,130 x 2,200 mm Linear frame, fixed: 1,200 x 2,200 mm & linear frame, adjustable: 900 x 2,200 mm Maximum lower tool or molded part height: 470 mm Maximum tool package height for installation with upper tool: 800 mm (821 mm) Maximum upper tool height: 650 mm Number of upper platens (molds and dies): 2 Machine equipment: - Movable heater - Chain rail for automatic film feed - Clamping frame or series frame can be used Different heaters available for interchangeable use, depending on requirements: - R5 0302 D vacuum pump (300 m3/h) - 1000 L vacuum tank - 6 cooling fans DNG 6-22.5 for accelerated cooling times (including cooling air with water cooling) - Maximum lifting capacity of lower and upper tools: 4,000 kg each 1.) IR heater (Ushio) 2.) Quartz heater (TQS) (Depending on the process and material, with its specific advantages) If you have any questions, please do not hesitate to contact us. Sincerely / Best regards i.V. Alexander Reizner Sales and Project Management Service FRIMO Innovative Technologies GmbH

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with thru-profile cross members. Designed for high point loads. Coupling device: * Fifth wheel plate with 2-inch kingpin Underrun protection: * According to EC regulations, bolted design Side guard: * According to EC regulations Landing legs: * 2 x 12 t landing legs with compensation foot and single-sided operation on the right in direction of travel Fpsdpoy Auhzefx Anlsk Axles: * 3 x 9 t air suspension axle assembly, SAF brand, with disc brakes approx. 430 x 45 mm, wheel fixing mid-centered ET120, ABS, total air suspension lift approx. 180 mm, of which lift approx. 110 mm and lower approx. 70 mm * Air suspension operated via hand control valve with stop function Steering: * Last axle forcibly steered by linkage Axle lift: * First axle liftable, with fully automatic, load-dependent lift control Brake system: * Two-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, anti-mix couplings fixed to front cross member, without connecting line to motor vehicle * Wabco brand Tyres: * Sixfold, 385/65 R22.5 160J on rim 11.75 x 22.5 ET 120 - brand at our discretion. Incl. tire pressure monitoring system, tire pressure display in cab (pre-installed by chassis manufacturer) Mudguards: * According to EC regulations, 1/4 PVC mudguards in front of and behind axle assembly Load securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t) * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t) * Drilled holes in outer frame every approx. 500 mm for lashing straps (straps can be hooked in with closed drop sides, beveled outer frame) Stake pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * Plug-in stakes: 20 galvanised tubular stakes approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stakes on the inside of the front wall Front bulkhead: * Reinforced steel bulkhead, fixed, interior covered with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor, recessed into the outer frame Side walls: * 4 x 250 mm side walls and rear wall made of anodised aluminium hollow sections, foldable and removable, removable Kinnegrip stakes * Side wall and stake magazine under the chassis * Left and right insertion rails for side walls and stakes Lighting system: * According to EC regulations, 24 Volt with multi-chamber lights, LED side marker lights, LED position lights front white, LED outline marker lights at rear, license plate lights * 1x 15-pin and 2x 7-pin plug sockets on front cross member Equipment: * Two wheel chocks with holders * Warning signs according to ECE 70 * Work spotlight on lamp bracket (operated via reverse gear) * Holder for rotating beacon at rear, incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Paintwork: * Chassis and front bulkhead sandblasted, primed and coated in a single colour * Chassis: hot-dip galvanised + RAL colour of choice * Front bulkhead: RAL colour of choice * Side walls: anodised aluminium * Top stakes front bulkhead: hot-dip galvanised * Hubs: KTL blac

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Fpedpfx Ansyz E T Sslek Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Bolted front wall, approx. 1,200 mm high, metal plated Stake magazine: * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Equipment: * Warning sign according to ECE 70 * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the supports (switched via reverse ge

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light Fpedpjwx Dctofx Anlsk * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Fpjdjw U H Sbspfx Anljk Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, control type: NC control, degree of automation: semi-automatic, actuation type: electric, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, hardened rollers, Pellet press for rent – suitable for wood, plastics (PE, PET), and agricultural by-products. Available: 4 kW (50–100 kg/h) or 22 kW (200–350 kg/h). Comes with various dies for different materials. Ideal for trial runs, pilot projects, and temporary production. Flexible rental periods, delivery, and support available. 👉 Henkes Industries GmbH Fpedpfextwyrjx Anlsk

Condition: used, Rotary transfer table, rotary indexing table with 16 stations Rotary transfer machine + hydraulic press TOX Rotary transfer machine, special-purpose machine with several assembly stations Manufacturing and assembly system using a rotary transfer process From the special-purpose machine manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS, type TC500, with 16 stations - pressing station with TOX power unit Fedpfjgd D U Esx Anlspk - vibratory conveyor - conveyor belts - inspection stations - some stations are still visible in the pictures but have already been dismantled Space requirement L x W x H approx. 3500 x 2750 x 2300 mm Weight approx. 3000 kg All in like-new condition - The system has never been used in series production.

Condition: ready for operation (used), Year of construction: 2011, A complete pasta line with 2x Cappelletti forming sets is available. 1) Pasta Technologies Group SRL dosing and mixing unit for pasta ingredients such as flour, water, and micro-ingredients. 2) Combined mixer-sheeter Pasta Technologies Group SRL MASA 540, year of manufacture: 2022, dough sheet thickness range: 7mm–8mm, dough sheet width: 540mm, corrugated rollers: 3, pairs of smooth rollers: 1. 3) 2x forming machines GEA/Pavan MRW 540, year of manufacture: 2011, pasta types: Ravioli/Cappelletti, production output Ravioli/Cappelletti: 140/120 strokes/min, dough sheet width: 540mm, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1300mm, weight: approx. 1200kg, filler frame weight: approx. 210kg. Includes 2x Cappelletti tools 3D. 4) Double conveyor belt and waste recovery unit. 5) Dough scrap return system Pasta Technologies Group SRL RS100 with cyclone. 6) Complete system control and management by Pasta Technologies Group QEHD. Documentation available. An on-site inspection is possible. Fedow Dfgkepfx Anlopk