Used Air Heating for sale (33,090)

Condition: good (used), Kroll M 150 Mobile Hot Air Generator Application areas: Heating of halls, tents, and construction sites Frost protection in horticultural businesses or warehouses of all kinds Rapid drying of new buildings Supplementary heating in the cold season Godpsxwkw Eefx Al Ssbu Fuel: Heating oil EL Rated heat output: 135 kW Rated heat input: 150 kW Oil flow rate: 12.7 kg/h Air volume flow: 7,300 m³/h Electrical connection: 220 V / 6.1 A Power consumption: 1.38 kW Protection class: IP 44 Dimensions: Length: 2600 mm Width: 900 mm Height: 1300 mm Weight: 270 kg More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater, 54.74 kW, Heating Capacity 5830 m³/h UDSA Gas-Fired Warm Air Heater – Efficient, even at peak loads The most well-known product from REZNOR is the UDSA gas-fired warm air heater, which ensures even air distribution in industrial halls. This easy-to-install unit is available in 14 sizes, ranging from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from the outside or from the room itself. The UDSA warm air heater from REZNOR guarantees uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of units, halls can be heated in a particularly economical way – directly, without a central heating system – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-Fired Warm Air Heater. The advantages: Efficiency of more than 92% Unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Modulation of the heating output up to 50% EC technology ErP Ready Gbjdpfjwb A Hijx Al Seu These units are directly heated gas-fired warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired warm air heater, including the gas and exhaust connections, must only be carried out by an approved installation company. The gas-fired warm air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculation operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage*, controlled via a room thermostat and a heating control switch - Ventilation, controlled via ECOtronic TN - L, with day-night-week program - Exhaust discharge via the roof, version B or C - Exhaust discharge through the outer wall, version C Gas-fired warm air heater type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. rated heat input (Hs) QN: 66.04 kW Max. rated heat input (Hi) QN: 59.50 kW Min. rated heat input (Hs) QN: 33.02 kW Min. rated heat input (Hi) QN: 29.75 kW Max. rated heat output: 54.74 kW Min. rated heat output: 26.92 kW Connection voltage: 230V 1N, 50Hz Air volume flow: 5830 m³/h Protection class: IP20 Pin No. 0461BN0677 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, Central ventilation unit HELIOS Air 1 XH1500 with highly efficient heat recovery and integrated air reheating. For controlled supply and exhaust ventilation of larger residential, commercial, or industrial areas. 2 EC fans at 0.5 kW each, 1,490 m³/h at 350 Pa. Electric preheating coil 3.9 kW, electronic reheating coil 3.8 kW, cross-flow heat exchanger, integrated filter box. Includes HELIOS Universal control unit ECO and 2 HELIOS duct sensors TFK – a functionally complete system. Technical data: - Air flow rate 1,490 m³/h at 350 Pa; fans 2 x 0.5 kW EC - Preheating coil 3.9 kW / Reheating coil 3.8 kW; cross-flow heat exchanger; integrated filter box - Control system: HELIOS Universal control unit ECO and 2 duct sensors TFK included - From a commercial environment, sold in its current condition without warranty. More units and equipment are continuously being offered for sale as part of a laboratory and pilot plant liquidation – inquiries are welcome. Gbodpszmaqaofx Al Seu Sold on behalf of a customer via the Köck auction house. Located in eastern Austria, exact address available upon request. Collection/dismantling by the buyer.

Condition: good (used), ApenGroup LRP28DE Gas-fired hot air generator Gas type: G20 natural gas Connection pressure: 20 mbar Rated heat input QN: 27 kW Rated heat output: 24.63 kW Connection voltage: 230V 1N, 50Hz Airflow rate: 2700 m3/h Protection class: IP20 You can find more new and used items in our shop! Gbodjx Ihlkopfx Al Seu International shipping costs available upon request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater UDSA Gas-Fired Warm Air Heater – efficient, even at peak loads. The most well-known device from REZNOR is the UDSA gas-fired warm air heater, which ensures uniform air distribution in industrial halls. This easy-to-install unit is available in 14 power sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from the outside or from the room, as standard. The UDSA warm air heater from REZNOR guarantees uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and innovative. With this generation of devices, halls can be heated in a particularly economical way directly – without a central heating system – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-fired warm air heater. The advantages: Efficiency of over 92% The unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air deflection vanes Gbjdpfx Aex Ihiiel Sju Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas-fired warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired warm air heater, as well as the gas and exhaust connections, must only be carried out by an approved installation company. These gas-fired warm air heaters are suitable for: - Natural gas or LPG operation - Recirculation operation - Intake temperatures below 5°C with stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch - Ventilation* control via ECOtronic TN - L* with day/night/week program - Exhaust gas extraction via roof, version B or C * - Exhaust gas extraction through the outer wall, version C * Gas-fired warm air heater type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. rated heat input (Hs) QN: 17.60 kW Max. rated heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air flow rate: 1360 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2009, Piston Type Semi-Automatic Pot Filler with Time Controlled filling. This can fill from 50grams up to 500 grams per piston stroke . Condition : Very Good Gbjdsz Ru R Iopfx Al Seu Available Immediately Filling Type: Piston Volumetric Pump Filling Heads: Single Usage: Yoghurt, Ice cream, Pastes, Fruits, etc. Automation: Air Operated

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater UDSA Gas-Fired Warm Air Heater – efficient, even at peak performance The most well-known unit from REZNOR is the UDSA gas-fired warm air heater, which ensures even air distribution in industrial halls. This easy-to-install recirculating air unit is available in 14 performance sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from the outside or from the room, as standard. The UDSA warm air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. Gbjdpfxex Ihg Ie Al Sou With this generation of units, halls can be heated in a particularly economical way – directly, that is, without central heating – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-Fired Warm Air Heater. The advantages: Efficiency of more than 92% Unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Even heat distribution Standard vertical and horizontal air guide vanes Modulation of the heating output up to 50% EC technology ErP Ready These units are direct-fired gas warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas warm air heater, including the gas and exhaust connections, must be carried out by an authorized installation company. These gas warm air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculating air operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation with 1 stage or 2 stages* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day-night-week program - Exhaust gas extraction via roof, version B or C ° - Exhaust gas extraction through the outer wall, version C ° Gas warm air heater type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Maximum nominal heat input (Hs) QN: 30.08 kW Maximum nominal heat input (Hi) QN: 27.75 kW Maximum nominal heat output: 25.53 kW Minimum nominal heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Carel HeaterSteam UR020HL10S isothermal steam humidifier Gbsdpfou Eb A Nsx Al Ssu Carel HeaterSteam UR020HL10S is an isothermal steam humidifier. It produces steam by heating heating elements that are immersed in a steam cylinder filled with water. This can be ordinary tap water or completely demineralized water. The heat generated by the heating elements heats the water to a temperature of 100 °C. Technical data: Dimensions (L x W x H): 690 x 438 x 887 mm Weight: 63 kg Steam output: 20 kg/h Power: 15 kW Voltage supply: 400 V/3 Steam pressure: 0...3600 Pa Steam connection: 40 mm Water supply connection: 3/4"G external Steam distribution For optimal humidifier performance, the steam produced must be distributed homogeneously throughout the room to avoid droplet formation and condensate accumulation. This can be achieved either with ventilated steam distributors or steam lances. The choice of steam distributor depends on the room in which the steam is to be introduced. For direct room humidification (in rooms, factory halls, etc.), ventilated steam distributors (optional) with a motor fan should be used. If, on the other hand, the steam is to be distributed in a duct or in HVAC systems, steam lances must be used, which utilize the velocity of the air flowing through for humidification. More items - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Sanyo air conditioner with gas heat pump -Model: SGP-E240K1GU2W -Cooling capacity: 71 kW -Heating capacity: 81 kW -Power consumption during cooling: 54.5 kW -Power consumption during heating: 58.6 kW -Sound level: 62 dB Gjdpfx Aeu Ebguol Sobu -Refrigerant: R410 -Power supply (V/Hz/Ph): 220/50/1 -External dimensions: 1750 x 1050 x 2300 mm -Number of fans: 2 x 730 mm -Weight: 940 kg -Stock: 1 piece -Condition: used / In working condition

Condition: good (used), Year of construction: 2006, functionality: fully functional, overall weight: 4,000 kg, heating capacity: 198 kW (269.20 HP), large warm air furnace for firewood and residual materials External dimensions approx. 3.5 m x 1.5 m x 3 m Weight 4 t Gbjdpjw Ucfdefx Al Ssu with control system with warm air blower

Condition: used, Rittal TopTherm Air/Water Heat Exchanger SK 3209500 Rittal air/water heat exchanger for switchgear cabinet climate control. Unit manufactured in 2019. A total of 3 units are available. Manufacturer: Rittal Series: TopTherm Type: SK 3209500 Device type: Air/water heat exchanger Condition: used Supply voltage: 230 V AC Frequency: 50/60 Hz Phases: 1~ Rated current: 0.40 A at 50 Hz Rated current: 0.48 A at 60 Hz Power consumption: 0.095 kW at 50 Hz Power consumption: 0.110 kW at 60 Hz Useful cooling capacity: 2.50 kW Cooling capacity measurement point: L35 / W10 Coolant flow rate: 400 l/h Operating temperature range: 1 °C to 70 °C Coolant: Water Gbodpfxszdafgo Al Ssu Maximum coolant temperature: 30 °C Operating pressure: 0.1 to 1.0 MPa Operating pressure: 14.5 to 145 psi Protection class: IP55 Weight: 23.5 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, cooling capacity: 56 kW (76.14 HP), type of cooling: water, input frequency: 50 Hz, heating capacity: 67 kW (91.09 HP), fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar Gbodpfx Ajd Tiu Esl Sou OUTDOOR USE ONLY! We have 4 pieces on Stock!

Condition: used, Rittal air/water heat exchanger for the climate control of control cabinets and automation technology. Manufacturer: Rittal Series: TopTherm Type: SK 3210100 Device type: Air/water heat exchanger Condition: used Supply voltage: 230 V AC Frequency: 50/60 Hz Gbedpfx Alszdafmj Ssu Phases: 1~ Rated current: 0.44 A at 50 Hz Rated current: 0.50 A at 60 Hz Power consumption: 0.100 kW at 50 Hz Power consumption: 0.120 kW at 60 Hz Useful cooling capacity: 4.00 kW Measuring point for cooling capacity: L35 / W10 Flow rate of cooling medium: 400 l/h Operating temperature range: 1 °C to 70 °C Cooling medium: Water Maximum cooling medium temperature: 30 °C Operating pressure: 0.1 to 1.0 MPa Operating pressure: 14.5 to 145 psi Protection class: IP55 Weight: 25.5 kg Location: Kusel

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 200 kg, REA Jumbo 115 / Jumbo 200, mobile warm air generator (230 V) with separate flue gas duct, mounted oil burner RG 4, pre-installed heating oil filter, radial fan, and plug-ready thermostat interface. Year of manufacture: 2007 - Rated heat input: 115 kW - Air output: 9,000 m³/h - Connection: 230 V - Weight: 200 kg Technical highlights of this series: - Burner hood with oil drip tray - Outlet opening: Ø 600 mm - Pre-fitted for recirculation operation - Shock-protected electrical distribution - Robust construction with large wheels for easy transport, even on rough terrain Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as flue pipes and rain caps are not included in this offer but can be provided on request. Gjdpfjyq Ricsx Al Sobu Note: The buyer can arrange collection via a freight forwarder. If you do not have contact with forwarding agents, we are happy to provide addresses or arrange inquiries on your behalf.

Condition: like new (used), functionality: fully functional, total width: 15,000 mm, total length: 240,000 mm, total height: 9,000 mm, Model: Saxon 5 Gbjdpez H T Dwefx Al Sju Manufacturer: Fischbein Machine type: Continuous hot‑air bag sealer Power: 220V single‑phase, 66 A Typical use: Sealing pillow‑style heat‑sealable plastic bags in fast‑paced production lines

Year of construction: 2023, condition: new, Selling a WLO 25 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 25.00 kW maximum heat output: 30.00 kW / approx. 300 m2 in set: forcing axial fan speed: 1400 rpm and capacity: 3110 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 230 kg Gross weight: 240 kg Furnace lining: 15 firebricks Godpfx Aoixupmel Sjbu removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 485mm x Overall Depth: 900mm x Overall Height: 1310mm Oven dimensions: Width: 390mm x Depth: 460mm x Height: 540mm Upper door dimensions (sheet 3 and 4 mm): width: 390 mm x height: 230 mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 155mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 310mm x Height: 210mm Center & Bottom Loading Port Dimensions: Width: 310mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Diameter exhaust outlet: Ø 130mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 350mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.58A Speed: 1400 rpm Air flow: 3110 m3 / h Safety: CE mark + protective net

Year of construction: 2024, condition: new, Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 44.50 kW maximum heat output: 50.00 kW / approx. 300 m2 Gbsdpfxsixup Ae Al Seu in set: force axial fan speed: 1350 rpm and capacity: 5060 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 330 kg Gross weight: 340 kg Furnace lining: 40 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 580mm x Overall Depth: 1290mm x Overall Height: 1310mm Oven dimensions: Width: 480mm x Depth: 930mm x Height: 680mm Upper door dimensions (sheet 3 and 4mm): Width: 390mm x Height: 330mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 315mm x Height: 310mm Center & Bottom Loading Port Dimensions: Width: 315mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 150mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 450mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.82A Speed: 1350 rpm Air flow: 5060 m3 / h Safety: CE mark + protective net

Condition: new, Year of construction: 2026, Firebox output: 175 kW Operating output: 140 kW Flue diameter: 200 mm Warm air duct: 1 x 500 mm Firebox length: 950 mm Firebox width: 600 mm Firebox height: 860 mm Air flow rate: 8900 m³/h Power consumption: 3500 W Gbodpsi Hplrsfx Al Sou Designed for room volume: 3000 m³ Area to be heated: 500/600 m² Oven height without warm air ducts: 2200 mm Oven width: 930 mm Oven length without flue gas fan: 1700 mm Weight: 615 kg

Year of construction: 2023, condition: new, WLO 4 35 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 30.00 kW maximum heat output: 35.00 kW / approx. 300 m2 in set: force axial fan speed: 1350 rpm and capacity: 3500 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Gbsdpfx Asixupusl Seu Net weight: 290 kg Gross weight: 310 kg Furnace lining: 28 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 580mm x Overall Depth: 950mm x Overall Height: 1310mm Oven dimensions: Width: 480mm x Depth: 580mm x Height: 560mm Upper door dimensions (sheet 3 and 4 mm): width: 390 mm x height: 230 mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 155mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 310mm x Height: 210mm Center & Bottom Loading Port Dimensions: Width: 310mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 150mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 400mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.82A Speed: 1350 rpm Air flow: 3500 m3 / h Safety: CE mark + protective net

Year of construction: 2024, condition: new, Selling a WLO 20 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 20.00 kW maximum heating output: 23.00 kW / approx. 230 m2 in set: force axial fan speed: 1380 rpm and capacity: 2910 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible fireplace made of 5mm thick boiler plate large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 160 kg Gross weight: 180 kg Furnace lining: 12 firebricks replaceable large cast iron grate covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 485mm x Overall Depth: 790mm x Overall Height: 1030mm Oven dimensions: Width: 380mm x Depth: 450mm x Height: 500mm Upper door dimensions (sheet 3 and 4 mm): width: 365 mm x height: 215 mm Bottom door dimensions (3 & 4mm sheet metal): Width: 365mm x Height: 295mm Top Loading Port Dimensions: Width: 285mm x Height: 195mm Lower Loading Port Dimensions: Width: 285mm x Height: 265mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 120mm Diameter exhaust outlet: Ø 130mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 300mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.30A Speed: 1380 rpm Air flow: 2910 m3 / h Safety: CE mark + protective net Gedpfxeixun Te Al Ssbu

Year of construction: 2023, condition: new, WLO 45 KW Hot air stove ,wood stove,Heating Thanks to the powerful combustion chamber, the stove can burn up to Pick up 120 cm long pieces of wood! Furnace parameters Nominal heating output: 49,5 kW approx. 450 m2 including: axial fan with speed: 1380 rpm and output: 5500 m3/h Included in delivery: Controller to regulate the operation of the SCL-1515 fan innovative design of the air jacket that completely surrounds the cooker for maximum efficiency Indestructible range cooker made entirely of certified boiler plate p265gh and 16M06, thickness #6mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 320 kg Gross weight: 340 kg Grid: 1000 x 250 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look solid construction huge combustion chamber 120 x 80cm! large loading door User Guide Yield: 75.00% CO emission at 13% O2: 1.20 m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20%* mg/Nm3, briquettes, coal only as an admixture up to 10% Gbjdpfx Asixuq Dsl Ssu Security and Certifications CE mark: YES / affixed to the rating plate Compliance with standard: EN13240:2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 800mm x Overall Depth: 1600mm x Overall Height: 1200mm Cooker dimensions: Width: 800mm x Length: 1200mm x Height: 800mm Upper door dimensions (3 & 4mm sheet metal): Width: 520mm x Height: 470mm Bottom door dimensions (3 & 4mm sheet metal): Width: 360mm x Height: 150mm Top Loading Port Dimensions: Width: 460mm x Height: 460mm Bottom opening dimensions: Width: 360mm x Height: 130mm Grate Dimensions: Width: 250mm x Depth: 1000mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 200mm Foot height: 140 mm

Condition: new, Electrically heated circulating air furnace (horizontal air flow) max. temperature: 550ᵒC Gbsdpsdt R Uuefx Al Ssu useable dimensions (w x h x d): 900 x 1300 x 1800 mm charge weight: 800 kg gross heating power: 72 kW circulation fan: 1 x 7,5 kW

Condition: used, Stainless Steel Heat Exchanger AGETHERMA Type FT-1.1-910/230/10-RS04-T10-ATWH Air-to-water, Air-to-oil Heat Exchanger Serial No. WT08-1065P-2 Year of Manufacture: 2008 Completely made of stainless steel (presumably 1.4571) Gas/air flow: 900 x 230 mm External connection flange: 1000 x 310 mm Max. permissible pressure: 10 bar Max. permissible temperature: 300 °C Godey Dvguepfx Al Ssbu Volume: 27 liters Test pressure: 17.9 bar Net weight: 325 kg Manufacturer test date Flange size: Ø DN25 DIN 2635 PN 40 (2 pieces) - Tubes are stainless steel with aluminum fins for improved heat transfer Available as optional accessories (at extra cost): 3 units heat exchangers with identical technical data and 27 liter capacity (weight per unit: 325 kg) 1 unit heat exchanger with identical technical data and 17 liter capacity (weight: 200 kg) 2x 90° bends with flange connection, made of stainless steel 2x adapters from rectangular flange to round pipe Ø 210 mm, made of stainless steel Price stated per heat exchanger The pictures show all 4 heat exchangers as one unit placed on a pallet. Total weight of all parts approx. 1,400 kg Sale of all heat exchangers as a package: 4,000 EUR

Condition: used, Year of construction: 2020, Nominal output: 29.8 kW Air flow rate: 2400 m³/h Combustion chamber depth: 580 mm Loading door: 330 mm x 330 mm Gbodsz A Eapjpfx Al Sou Heatable volume: approx. 600 m³ Heatable area: approx. 120 m² Space requirement: approx. 600 mm x 800 mm x 1900 mm Weight: 230 kg Flue pipe diameter: 160 mm Warm air outlet nozzle: 2 x 200 mm Operating modes: Automatic and manual Chimney diameter (approximate): 200 mm

Condition: excellent (used), Heat exchanger, shell-and-tube heat exchanger, liquid cooler, Baltimore Aircoil International BAC F100, used machine Gsdoyfnuljpfx Al Sjbu Manufacturer: Baltimore Aircoil International Type: BAC F100 Year: 2015 Pressure: -10 / 10 bar Temperature: -20 / 82 °C Medium: Water / Glycol