Used Air Humidification Plant for sale (29,070)

Condition: ready for operation (used), Year of construction: 2020, Two mobile industrial air cleaners Trotec that have only been used once are available. Air volume flow: 5700m³/h, negative pressure: 1150Pa, air volume for filter class H: 3000m³/h, min. filter area with H13: 26m², opening diameter: 380mm. Machine dimensions X/Y/Z: approx. 1300mm/800mm/1050mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Bledpfx Aasx Tulze Njd

Condition: good (used), Year of construction: 1999, thermal exhaust air combustion system, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter -Thermal exhaust air combustion plant: Manufacturer LTG Type 20000 Nm³/h -Protocols: regarding maintenance and emissions are available Documentation: complete -Combustion chamber temperature: 850° C Bodpfx Aasvtzdlo Neld -Heating fuel: Natural gas -Calorific value: 10 kWh/m³ -Connected load: 45 kW -Exhaust air volume: 20,000 Nm³/h -Max. solvent quantity: 1.5 g/m³ -Individual components: see photos

Condition: ready for operation (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Blower for transporting goods from the dryer to the rebler, through the air separator and then onward to packaging. Blower with 7.5 + 11 kW with frequency inverter, additional blower with 7.5 kW optionally available. 3 rotary airlocks at 0.55 kW each. Steel frame for the rebler unit, disassembled for truck transport. Control cabinet for rebler and air separator system with 32 A input current. System has been dismantled. No in-house herb drying anymore. - youtube short: Herb separation, cleaning, air separator for mint, sage, lemon balm. Bljdpfxjwqfxys Aa Njd

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake port : 300 mm nominal motor power : 7,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 6000 m³ / h Nominal volume flow : 5.089 m³ / h Negative pressure 2.587 Pa Filter area 30 m² Dimensions (L x W x H) in mm 3.000 x 1.361 x 2.817 Briquetting capacity 30 - 50 kg / h Briquette diameter: 50 mm Weight: 1570 kg Machine is brand new in our STOCK - IMMEDIATELY AVAILABLE - Bledpsh D If Hjfx Aa Njd subject to prior sale Location: 54634 Bitburg

Condition: used, Year of construction: 2019, Oil-free piston compressor with 90 l compressed air tank and separate refrigeration dryer. Bsdpfx Aaexfquye Njld Additional title: piston compressor with refrigeration dryer Delivery volume: 0.252 m3/min at 6 bar Max. overpressure: 7 bar Volume pressure vessel: 90 l Power: 2.2 kW Features: piston compressor with pressure tank, refrigeration dryer

Condition: used, Compressed air system with compressed air compressor and compressed air tank - KAESER SK26 screw compressor (built in 2005) - Gebre GmbH compressed air tank with a capacity of 750 litres (built in 1996), standing on 3 feet with pressure gauge. Additional title: air compressor with compressed air tank Delivery appr.: 2,2 m3/h Max. working overpressure compressor: 10 bar Gross volume compressed air tank: 750 l Bodpew Tbtkofx Aa Nold Max. working overpressure compressed air tank: 11 bar Power: 15 kW Current: 400 V Voltage: 35 A Frequency: 50 Hz Length: 0,8 m Width: 0,8 m Height: 1,03 m Weight: 290 kg Operation / Control: control panel on compressor Base construction: tank vertical on 3 feet Features: air compressor, compressed air tank

Condition: good (used), Item: NO-2003-Dairy-Cheeseplant Complete Dairy Cheese Plant Consisting of: - 3 pc Damrow Double-O cheese vats volume 12.000 liter. Bjdokzk Ddepfx Aa Neld 2650 x 4000 x H 3150 mm - 1 pc Gadan Prepress unit with cutting and filling curd to moulds. 2200 x 10.000 x H 2600 mm - 1 pc Gadan Final Cheese Press with moulds 280X340 mm 2700 x 9300 x H 1800 mm - 1 press stand for pre-presser 3100 x 3900 x H 3700 mm - 1 intermediate station 2200 x 2700 x H 3150 mm - 1 pc Unit to take out cheese from moulds. 550 x 2150 x H 1400 mm - 1 end station 1600 x 3260 x H 2750 mm Equipment has been running until week 10 and will be dismantled starting week 16-17 Can also supply Brine system. We can dismantle and pack complete plant in Container/Trucks See attached pictures and video

Year of construction: 1999, condition: good (used), COMPLETE DAIRY - in full production function Blodpfx Aaek I T Sij Nsd We offer for sale a complete dairy for the production of consumable, pasteurized milk, yogurt, kefir, cream and cheese (fresh and sliced cheese) Capacity: 15 – 20,000 L of milk/day Milk is packed in PVC bags of 1.0 L - capacity 2,400 pcs/h Yogurt is filled in: - large glasses 410 gr - capacity 3,000 pcs/h - small cups 180 gr - capacity 3,000 pcs/h - PET bottles 0.5 and 1.0 L - capacity 1,000 pcs/h Kefir is filled in PET bottles 05 and 1.0 L, capacity 1,000 pcs/h The cream is filled in: -bowls 1000 gr - capacity 3,000 pcs/h - large glasses 410 gr - capacity 3,000 pcs/h - small cups 180 gr - capacity 3,000 pcs/h Cheese is filled in: - buckets of 5 and 10 kg - fresh cheese -vacuum foil - fresh and white cheese slices 500-1,000 gr Equipment specification - manufacturers from Italy - Slovenia and Serbia Reception line Digital meter with foam remover, 2014 Tank horizontal (lactofreeze) 3,200 L cooling on freon - 3 pcs Tank vertical 3,000 L – 2 pcs Pasteurization line Pasteur (flow-through) with retainers 2,000 L Separator (self-cleaning) 2,000 L Homogenizer 2,000 L The equipment is adapted to the capacity and made to order Manufacturer Scremac Italy 2000 years. Fermentation line Duplicator 2,000 L – double wall insulated with planetary mixer 2010. Duplicator 1,000 L – double wall insulated with planetary mixer 2010. Filling lines Two-row automatic filling machine for filling cream into bowls Automatic filling machine for filling cream and yogurt per 410g, 2014. Automatic filler for filling yogurt and cream 180gr, year 2008. Filler - capper - dater - automatic packing tunnel Fills 1.0 L and 0.5 L bottles, 2016 Filling machine for milk and yogurt in PVC bags 2400 pcs/h. Original French manufacturer, older year. Videojet - automatic date marker, - 2 pcs Cheese tub insulated with HARFO 1,600 L, 2008. Triblender 500 L for the reconstruction of powdered milk, 2015. Vacuum cleaner for fresh and white cheese slices Ice water pool (STAINLESS STEEL VESSEL) 10,000 L, FREON cooling, manufactured by KOTA-Slovenia, year 2000. A new compressor has just been put on it. Chip for washing 3 x 2,000 L, automatic, year 2010. Semi-automatic PET bottle blower 1.0 and 0.5 L with Boge compressor, year 2010. Complete cooling system for cooling the warehouse of finished products, and the same is programmed for heating and cooling the fermetal chamber, year 2010. manufacturer KOTA-Slovenia, with 3 engines Mini (drive laboratory) Solid fuel boiler (wood) 250 kW Mono-pump All equipment is connected by pipe fittings and pumps for operation. The start of the dairy: 1999 The equipment is in full production function and can be seen in operation It is regularly serviced and maintained - the last service was performed 6 months ago Installed power 50 kW Solid fuel - wood - is used as energy Required hall size: 500 m2, height 4 m 16 workers work in the dairy The complete dairy is for sale, not in parts.

Year of construction: 2007, condition: good (used), RECEPTION, PROCESSING & STORAGE OF RAW MILK This line consists of: 1. Blower with digital counter with touch panel; exchanger for milk cooling type APV with associated pumps and installations capacity of 10 000 l/h; 2. Two raw milk storage tanks capacity of 17 500 l and one tank capacity of 10 000 l, with associated vent pipes and installations; 3. Pasteurizer type APV with associated vent pipes and armature; 4. Separator ALFALAVAL with associated vent pipes and armature; 5. Homogenizer type APV with associated armature; 6. Standardizer type APV with capacity of 10 000 l/h and every machine has its own electrical box; 7. Automatic central industrial washing with triple chamber, with capacity of 9 000 l with associated vent pipes and armature. (The whole process is automatic and also includes truck washing, it is managed from management cabin); 8. Process tank for yoghurt production with capacity of 8 000 l with refrigerator and adjoining pumps and armature; Bedpon Nx Utsfx Aa Nsld 9. Process tanks for cream: 2 x 1 500 l and 1 x 3 000 l, with associated pumps and armature; The equipment was installed in 2007 in the same period when the whole automatic management in the company has been done. All automation is SIEMENS. Equipment is in the top state. Process of production is stopped in December 2017.

Year of construction: 2005, condition: like new (used), DAIRY FOR THE PRODUCTION OF HARD AND SEMI-HARD CHEESE, as well as fresh cheese for the bakery industry We offer a complete dairy for processing milk into hard and semi-hard milk cheeses with high quality cheese production technology (such as Grana Padano–Italy), and the production of fresh cheese for the bakery industry. It was built in 2005 and equipped with the most modern stainless steel equipment for cheese production. It has its own heating, has a laboratory for product control, and within the factory there are offices, as well as a spare warehouse. Capacity: 1 batch of 5,000 L of milk can be processed within 3-4 hours 1 shift of 8 hours can process 10,000 L of milk with 4 workers Finished products based on monthly capacity: Semi-hard and hard cheeses...up to 30 tons/month. Curd……………up to 10 tons/month. Fresh cheese……………up to 10 tons/month. Plant description……….see attached FLOOR PLAN: Reception, production, drying, packaging, brine, ripening... Maturation room with wooden shelves equipped with regulation humidity and temperature. There is also a bio-purifier of waste water. The equipment requires an area of 500 m2, height approx. 5 m. Boiler room 130 m2, 2 boilers, one gas and the other oil burner. Refrigerator approx. 50 m2, height 6 m, regime 2-8 °C Required electrical power: 50-60 kW List of technological equipment: 1. Milk flow meter with vent 2. Storage tank for fresh milk 3. Plant for thermalization of milk/plate pasteurizer 4. Separator-centrifugal purification and standardization of milk 5. Cylindrical container for receiving cream 6. Fermenters for the production of pure cheese culture 7. Cheese maker 8. Storage tank for thermally processed milk 9. Storage tank for whey 10. Prepress for cheese 11. Work table for filling cheese mass into moulds 12. Pneumatic presses for cheese 13. CIP-plant for circular machine washing 14. Brine 15. Wooden racks for ripening cheese 16. Moving platform for sorting and caring for cheese 17. Three-part washing basin/mould for cheese and cheese 18.SC-self-priming pump 19. CC-centrifugal pump 20. Tub for the production of fresh cheese 21. Packaging machine Milk intake: 2 tanks per 10,000 L Whey tank: 1 pc of 20,000 L Blsdpfxoix N R No Aa Ned CIP: 3 tanks of 1,000 L each Duplicators: 2 x 1,000 L Main boiler 5,000 L manual adjustment of parameters, Alfa Metal – HR Pasteurizer: Jedinstvo - HR - 5,000 L/h - approx. 20 years old. Separator: Alfa Laval - Sweden - 5,000 L/h - approx. 20 years old. Schulenburg tub 2,500 L Start of operation of the dairy: 2007-2008…….stopped production in 2016. Minor service required: inspection of equipment and lubrication There is technical documentation of the equipment Note: For sale only complete equipment. Transport approx. 5-6 x 40ft. More photos upon request !!

Condition: refurbished (used), Complete cheese grating line for cheddar or Mozzarella cheese blocks. Bledpfx Aasp T Tghe Ned Cheese blocks are cubed and fed to the Cheese grater then up a conveyor dosed with powder and tumbled Arcall Cheese cutter, transfer conveyor, Urschel CC grater, incline conveyor and tumble mixing drum Can produce 1,000 Kg of grated cheese per hour. A Weigh bagging system can be added to the grated cheese line

Condition: new, ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above. EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC. Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface. Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting. Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions. Each Proton dehumidifier is built to the highest quality standards and comes with regional certification. The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity. Blodpfxekw Ukuo Aa Nsd The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions: •Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air. •Avaliable in pre-cooled and after-cooled versions for warm climates. •Robust design with steelframe, eyebolts etc. •Vital parts can easily be maintained and exchanged. •Large air inlet grills and filters. •Can be built into containers for protection. •Adjustable dehumidifying capacity and outlet air temperature in 4Grades. •Outdoor and indoor use. •Dry air pressure up to 1200 Pa. Technical. Spec.: Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.

Condition: used, Freshline freezer MP Type IQF 1220.15/3070 suitable for nitrogen Bljdpfx Aaeymxg Uj Ned all stainless steel product height: max. ± 100 mm capacity: ± 5.000 kg / h product load (kg/running meter): ± 13-14 kg / running meter 400/460V, 50/60Hz, 3PH+PE, 110A, 32kW Pneumatic: 1Nm3/h at 5-7barg LIN pressure nitrogen 3barg net belt width ± 1.220 mm net belt length ± 16.800 mm dimensions (l x w x h) : ± 17.700 x 2.600 x 2.600 mm (max open) in very good condition

Condition: as good as new (ex-display), Year of construction: 2022, 1.0 ft. Ultrasonic Cleaning Device Manufacturer: AIR FRESH SERVICE INDUSTRIEFILTER Bledjv Nztxepfx Aa Nsd Type: 1-Chamber Cleaning System Inner Tank: 750 x 600 x 770 mm Year of Manufacture: 2022 THIS DEVICE HAS NEVER BEEN USED.

Condition: used, suitable for nitrogen Blodjyfd R Nepfx Aa Nsd all stainless steel belt width ± 600 mm nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm product height: max. ± 80 mm

Condition: excellent (used), Offer consisting of: complete compressed air system comprising SCC Flexi 55kW screw compressor, air-cooled, SCC DRA 480 refrigerant dryer, only about 2000 load hours, compressed air tank 1000 litres (OKS brand), year of manufacture: 2021 Blsdpfx Asyl S Ebja Nsd

Condition: new, Year of construction: 2025, functionality: fully functional, power: 390 kW (530.25 HP), fuel type: hybrid, color: other, Equipment: cabin, CONSTMACH V-80 mobile vertical shaft impact crusher is a fully equipped mobile sand production plant specially designed for producing high-quality fine aggregate and cubic-shaped sand. This plant delivers superior performance in 0–5 mm particle sizes thanks to the VSI 800 CR vertical shaft impact crusher technology developed with advanced engineering solutions. Its compact design, easy transportability, and high efficiency deliver excellent results, especially when processing rocks of varying hardness, such as granite, basalt, dolomite, gabbro, and limestone. The V-80 can be fed with natural stones up to 40 mm in size after primary or secondary crushing. The plant provides a production capacity of 150 to 200 tons per hour, depending on the hardness of the stone. During production, three different fractions can be obtained simultaneously, in addition to material smaller than 5 mm. The hydraulic foot system, short assembly time, and PLC-based automation structure offer maximum ease of use for the operator. Furthermore, it guarantees long-lasting and reliable operation with Siemens – Schneider brand electronic components. V-80 Mobile Vertical Shaft Crusher Technical Specifications Bjdoxqbgdepfx Aa Nsld Production Capacity: 150-200 tph Maximum Feed Size: 40 mm Feed Height: 4.5 meters Main Configuration: VSI Crusher + Vibrating Screen Total Motor Power: 390 kW Electric Generator Requirement: 700 kVA Plant Weight: 40 tons Plant Dimensions: 18.8 (L) x 3.65 (W) x 4.4 (H) meters Chassis Type: Single chassis with wheels, equipped with hydraulic legs Why Choose the V-80 Mobile Vertical Shaft Impact Crusher? At CONSTMACH, we offer our customers maximum efficiency, low maintenance costs, and quick installation advantages in rock crushing and screening processes. The V-80 model provides flexibility and operational ease in the field with both its high production capacity and mobile design. Its compact chassis, which can be transported with just a tractor, allows for quick transitions between different construction sites. Moreover, it guarantees uninterrupted production in all conditions with its dust reduction system, remote control support, and optional diesel generator integration. With its durability, energy efficiency, and world-class engineering quality, the V-80 has become synonymous with reliability and performance in sand production. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance. Information: The prices listed in the advertisement are shared based on current information. However, due to changes in market conditions and supply processes, our prices may vary from time to time. Therefore, we recommend requesting a quote from us for accurate pricing information.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH SW series mobile sand washing and screening plants deliver maximum performance in the field with high efficiency and flexible usage capabilities. Used for washing, screening, and classifying natural sand and gravel, these plants can be easily positioned even in confined spaces thanks to their compact design. Having all equipment assembled on a single mobile chassis significantly reduces setup time and makes transportation extremely practical. These plants, which can be quickly moved from site to site, provide businesses with significant savings in both time and money. SW-1240 Production Capacity: 60 t/h Screen Dimensions: 1,200 x 4,000 mm Helical Washer Dimensions: 400 x 4,000 mm Feed Height: 4,600 mm Total Motor Power: 37 kW Electric Generator Requirement: 75 kVA Weight: 20,000 kg Transport Dimensions: 15(L) x 2.8(W) x 4.2(H) m SW-1640 Production Capacity: 80 t/h Screen Dimensions: 1,600 x 4,000 mm Helical Washer Dimensions: 500 x 5,000 mm Feed Height: 4,650 mm Total Motor Power: 41 kW Electric Generator Requirement: 85 kVA Weight: 24,000 kg Transport Dimensions: 15.5(L) x 3.25(W) x 4.3(H) m SW-1850 Production Capacity: 150 t/h Screen Dimensions: 1,800 x 5,000 mm Helical Washer Dimensions: 600 x 6,000 mm Feed Height: 4,700 mm Total Motor Power: 50 kW Electric Generator Requirement: 100 kVA Weight: 32,000 kg Transport Dimensions: 16(L) x 3.65(W) x 4.4(H) m SW-2060 Production Capacity: 200 t/h Screen Dimensions: 2,000 x 6,000 mm Helical Washer Dimensions: 700 x 7,000 mm Feed Height: 4,750 mm Total Motor Power: 55 kW Electric Generator Requirement: 120 kVA Weight: 37,000 kg Transport Dimensions: 17(L) x 3.85(W) x 4.5(H) m Bodpfexqgy Nox Aa Nsld Why Choose CONSTMACH Mobile Sand Washing and Screening Plant? CONSTMACH combines quality, durability, and user-friendly design in its mobile sand washing and screening plants. Manufactured to European standards, our machines exceed industry expectations with their high washing capacity and low maintenance costs. Every plant we produce, backed by years of engineering experience, aims to ensure uninterrupted efficiency in our customers' production processes. Offering portability, quick installation, and high performance, these plants give you maximum flexibility at every stage of your projects. Choose the CONSTMACH brand for quality production, technical support, and reliable service. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: excellent (used), Aerosol extraction and filtration Manufacturer: United Air Specialists Type: Mena 2000 Com. 13051 P: 1.5 kW Vmax: nom. 1700 m³/h Bledpfx Aox Rp Eqoa Ned pg: 1500 Pa U: 400 V F: 50 Hz I: 3.3 A tmax: 65°C Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale are 2 industrial air filters of the Air-Fresh-Service brand and type F-V15D The units are in very good condition and fully functional Units can be purchased individually or as a package, individual prices will be quoted on request Technical data: Blsdet Tyqmspfx Aa Njd Year of construction: 2016 V/Hz: 400/50-60 A1,9-1,5 kW: 1.15 Structure: 2 filter chambers with 3 filters each On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), functionality: fully functional, load capacity: 500 kg, Equipment: foot remote control, Welding turntable KT 500, speed adjustable via potentiometer or foot pedal. Table diameter: 600 mm. Height to center with vertical disc: 580 mm (-50 mm). Length: 1.0 m. Width: 0.6 m. Infinitely variable electric tilt range approx. 0–130°. Stepless speed adjustment. Includes hand remote control and foot pedal. Optional: Quick-action chuck, 400 mm diameter, €550. Bledpoylimcefx Aa Nsd

Condition: used, Rüttler - Jogger VIBRO-AirYear ca. 1992 Online-Video-Inspection by Skype-Video Bodpfx Aasrgbz Ne Nold We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2017, condition: ready for operation (used), A foam bag system for packaging smaller and individually manufactured parts is available. Packaging capacity: 16 bags/min, film type: perforated, bag dimensions 1 X/Y: 470mm/400mm, bag dimensions 2 X/Y: 470mm/600mm. Machine dimensions X/Y/Z: approx. 500mm/500mm/700mm, weight: approx. 30kg, control: Instapak 901. Includes two component filler, spare parts, and foil bags. Documentation vorhanden. An on-site inspection is possible. Bledpfx Ajx A Hg Hja Nod

Year of construction: 2001, condition: used, Compressor, compressed air unit, piston compressor, quiet running compressor, compressor for dentistry, quiet running compressor -Manufacturer: Jun-Air, quiet compressor type OF301 -Motor power: 250 W -max. pressure: 8 bar -Number: 2x compressor available -Price: per piece -Dimensions: 220/160/H230 mm Blodpfou Huvfox Aa Nod -Weight: 9.2 kg/piece

Condition: good (used), Filter system, clean air filter, fine filter, filter, compact filter, particulate filter, filter cassette -Manufacturer: Filt Air, air filter type GT4-13AE-YBCO Bsdpotpyq Uofx Aa Nold -Front frame dimensions: 1210 x 600 mm, see photo nameplate -Connection: Ø 230/250 mm -Number: 20x air filters available -Price: per piece -Dimensions: 1210/190/H600 mm -Weight: 16 kg/piece