Used Altendorf C 45 for sale (123)

Condition: new, Year of construction: 2022, New machine Ijdpfx Aew I Uxcog Nsih Year of manufacture: 2022 Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: new, Year of construction: 2024, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, power: 5 kW (6.80 HP), sliding table length: 3,200 mm, Exhibition machine F 45 Elmo Drive - Swivel + / - 45 ° - Cutting height 200 mm - Preparation for scoring unit no. M24038 - Double roller carriage with 3200 mm - Angular mitre fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual Iiedpfx Agjuh R R Ee Nsh - Template holder - On/Off switch on the double roller carriage - Front support roller

Condition: new, Year of construction: 2025, functionality: fully functional, cutting length (max.): 3,105 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height with scoring (max.): 150 mm, saw blade diameter: 450 mm, height adjustment type: electric, table height: 910 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 5,000 rpm, type of input current: three-phase, input voltage: 400 V, warranty duration: 12 months, power: 7.5 kW (10.20 HP), Altendorf F45 Pro Drive The machine is new and configured as follows: Iodpfsxaudhox Ag Nsih Working height: 910 mm Sliding table length: 3200 mm Control panel at eye level for comfortable operation Cutting height: 150 mm with a 450 mm saw blade Main motor: 7.5 kW with three rotation speeds; features the AKE saw blade changing system 2-axis scoring unit with a safety LED light in the scoring area, enhancing operator awareness when the scoring unit is active Main motor and scoring unit ON/OFF buttons on the sliding table for convenient machine startup Mitre crosscut fence, extendable to 3500 mm, with angle correction Cutting width: 1300 mm with CNC, programmable via the screen Gobjxaudhskr A Tq Djkc Motorized rise, fall, and tilt adjustment (0–46°) for the main saw blade, with automatic cutting height correction when the blade is tilted The Altendorf F45 has long been recognized as the flagship of sliding table saws, consistently setting the highest quality standards for this type of machine.

Condition: used, Year of construction: 2005, No. 04484 Sliding table saw Altendorf F 45 Elmo III Used, year of construction 2005 Saw blade diameter max. 450 mm Double roller carriage with carriage length 2250 mm Saw motor 5.5 kW, 3000 / 4000 / 5000 / 6000 rpm Scoring unit with RAPIDO system, motorized Cutting width 1000 mm Elmo / Alu Saw blade with motorized height and angle adjustment Cutting width motorized adjustable Table top extension 840 mm Angle mitre fence extendable up to 3500 mm Digital display on fence DIGIT L Transport dimensions approx. 2800 x 2100 x 1850 mm LWH Weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Iedew Ni Sgopfx Ag Noih For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: good (used), Year of construction: 1990, cutting width (max.): 1,000 mm, cutting height (max.): 140 mm, table length: 1,400 mm, power: 5.5 kW (7.48 HP), Types:F 45 ,Machine nr:90-8-86 Iiodpfx Aotxh Niog Njh

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: GM010.0396, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, table length: 840 mm, power: 5.5 kW (7.48 HP), Factory-refurbished Altendorf F45 with ProDrive control from the manufacturer! TECHNICAL DETAILS Cutting Data Cutting length: max. 3,200 mm Cutting width at parallel fence: 1,300 mm Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm Carriage Length double roller carriage: 3,200 mm Table Data Table length: 840 mm Performance Data Power: 5.5 kW MACHINE DETAILS Machine height: 910 mm Motor power: 5.5 kW (7.5 HP) Dust Extraction Connection Extraction top: Ø = 80 mm Extraction bottom: Ø = 120 mm Negative pressure: 1,200 Pa at total suction connection, Ø = 140 mm Airflow: v_min = 1,110 m³/h at 20 m/s Iijdpfsw I Rycex Ag Noh Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Lighting Continuously variable speed control Scoring unit LED lighting 3-axis scorer including park position On/off switch on double roller carriage Angle/miter fence Parallel fence DIGIT X 1,300 mm Front support roller Second support on double roller carriage

Year of construction: 1991, condition: used, Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm Iijdpfx Asmydmbsg Neh -Weight: 1104 kg

Condition: good (used), Altendorf tkr 45 panel saw, Sliding table 140 cm, Iiodpfjw Rnvyjx Ag Noh Main motor 5.5 kW, Max. blade diameter 400 mm, Blade tilt and height hydraulically adjustable, Cutting width to the right 85 cm, Machine in good condition.

Year of construction: 1986, condition: good (used), Sizing saw Altendorf TRK 45 Year of manufacture 1986 S/N 86-9-209 checked in our workshop for normal operating condition carriage length: 1350 mm height and swivel adjustment manual with handwheel engine power: 5,5kW cutting width: 1250 mm 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 ( without scorer ) with scorer Automatic engine brake weight approx. 1100 kg Technical specification under reserve + 2 additional saw blades Iiedpfx Aeng Etreg Neh

Condition: not inspected (used), Year of construction: 1979, functionality: unexamined, Power rating: 380V 5.5kW Star-delta switch Edging carriage length: 3200 mm Height adjustment and tilting via handwheel Cutting width: 1000 mm Parallelogram guard with narrow cover Cross table with stop Rip stop Iisdpfx Aev Uqa Eeg Neh Scoring unit WITHOUT miter stop

Condition: new, Year of construction: 2025, functionality: fully functional, cutting length (max.): 5,000 mm, cutting width (max.): 1,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, type of input current: three-phase, Equipment: lighting, motor brake, rotational speed infinitely variable, scorer, You can get all common Altendorf models, including the F25, F35, WA80, and F45, as well as the Hand Guard machine in all variations. Basic Equipment Electrically driven height and tilt adjustment 0-46° with automatic cutting height correction when tilting Controls at eye level, tiltable Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm, larger available upon request. Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Maximum sawblade projection: 150 mm Maximum sawblade diameter: 450 mm Drive power: 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2,000 - 6,000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a maximum sawblade diameter of 550 mm and a maximum sawblade projection of 204 mm for one-sided tilting. Iiedpfewf Hdgjx Ag Noh In combination with a scoring unit, the maximum saw blade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). 2-axis scoring unit, single-axis tilting With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in their respective hard-chrome-plated guide rods. This smooth running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-hollow chamber system. The table surface is precisely planed and anodized. A hard-chrome-plated round rod, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. On/Off Switch on the Sliding Table The on/off switch on the sliding table is always within easy reach. The four buttons turn both the main saw blade and the scoring unit on and off. This saves time and ensures greater safety. Angle and miter stop, cutting to lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the tilt angle is continuously adjustable by 49° and is displayed on a scale. Ask us about your dream machine and we will be happy to advise you. We are happy to arrange viewings directly at the machine, in the factory, or with wood dust in the air.

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, cutting length (max.): 3,400 mm, cutting width at rip fence: 1,300 mm, table length: 1,200 mm, main saw diameter: 500 mm, power: 5.5 kW (7.48 HP), Equipment: lighting, rotational speed infinitely variable, scorer, Used machine GM010.0369 Year of manufacture: 2021 F45 ElmoDrive Machine height: 910 mm Operation at eye level Template holder directly at the control panel Max. saw blade diameter: 500 mm Motor 5.5 kW (7.5 HP) VARIO 3-axis scorer incl. parking position LED lighting TPL 1200 mm reinforced Double roller carriage with carriage length 3400 mm Angle-mitre fence DIGIT LD CNC parallel fence 1300 mm Front support roller Laser cut line display Isdpfxow Inwls Ag Njih

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 85-10-116, Equipment: scorer, Machine no: 85-10-116, Type: TKR 45 Table: 1400X400mm Vorrizer, Iijdpfxswkha Te Ag Noh

Condition: used, Year of construction: 2005, functionality: fully functional, cutting width (max.): 1,300 mm, saw blade diameter: 500 mm, table length: 3,400 mm, height adjustment type: electric, power: 5.5 kW (7.48 HP), Panel saw Manufacturer: Altendorf Type: F45 Elmo CE Year of manufacture: 2005 Carriage length: 3,400 mm Cutting width: 1,300 mm Cutting height: approx. 171 mm Iodpfxovnrmys Ag Noih Max. saw blade diameter: 500 mm Speed: 2,000 - 6,000 rpm Cutting width adjustment: Electric Motor brake: Yes

Condition: excellent (used), Equipment: scorer, Electric adjustment of saw blade height and angle; scorer. You can call or write to us. We can speak and write in German and Russian. You can also send messages in English. Iijdpjw Ix Alofx Ag Njh

Condition: reconditioned (used), Year of construction: 1986, cutting length (max.): 2,800 mm, cutting width (max.): 800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Iodpfx Agswrb U To Noih

Condition: good (used), Year of construction: 1994, functionality: fully functional, Format circular saw Altendorf F 45 Year of manufacture: 1994 S/N 94.09-172 Manufacturer: Wilhelm Altendorf GmbH & Co. KG General Information Machine type: Format circular saw Version: Without scorer Technical Data Aluminum sliding table 3000 mm Main saw blade diameter: max. 450 mm (recommended: 300–350 mm for standard work) Cutting height at 90°: up to approx. 150 mm (dependent on saw blade diameter) Cutting length (sliding table): depending on version, typically 3000 mm Cutting width at rip fence: approx. 1000 mm Main saw speed: Multi-stage – approx. 3000 / 4000 / 5000 rpm Main saw motor power: approx. 4 kW (optionally up to 5.5 kW) Iijdpfx Agjwrfmao Njh Saw blade tilting: 0–45° (manually adjustable) Height adjustment: manual via handwheel Equipment Massive, ball-bearing aluminum sliding carriage (precision-guided) Crosscut fence with adjustable angle stop and flip stops Robust rip fence with fine adjustment and digital display Table extension (depending on configuration) Mechanical height protection / saw blade guard Features No scorer: The machine is especially suitable for solid wood and rough cutting of panel materials. Solid industrial quality – durable solid mechanics, easy maintenance Cast iron machine table for high smoothness and precision EXTRA: Altendorf Digit X readout unit at the rip fence Weight 1,100 kg L x W x H = 3.0 m x 1.6 m x 1.5 m

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, cutting length (max.): 3,400 mm, cutting width at rip fence: 1,300 mm, table length: 1,200 mm, power: 5.5 kW (7.48 HP), Equipment: lighting, rotational speed infinitely variable, scorer, Used machine GM010.0277 Year of manufacture: 2021 F45 ElmoDrive Machine height 910 mm Eye-level control Max. saw blade diameter 500 mm 5.5 kW (7.5 HP) VARIO motor Ijdpow Imxzjfx Ag Neih 3-axis scorer incl. park position LED lighting Table extension 1200 mm Double roller carriage with 3400 mm carriage length PQS-LD central position CNC parallel fence 1300 mm Front support roller

Year of construction: 1980, condition: good (used), Format panel saw Altendorf F 45 year 1980 S/N 80-8-203 Slide length: 2500 mm Height and swivel adjustment manual with wheel Motor power: 5, 5kW Cutting width: 800 mm 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 Weight approx. 1100 kg Iiodpfx Agoipv Rlj Noh technical specification under subject

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, cutting length (max.): 3,800 mm, cutting width at rip fence: 1,300 mm, saw blade diameter: 450 mm, table length: 840 mm, power: 6.5 kW (8.84 HP), Equipment: scorer, Used machine GM010.0256 Year of manufacture: 2020 F45 ElmoDrive Machine height: 910 mm Eye-level control panel Dual-sided tilting ( + /- 46°) Maximum blade diameter: 450 mm Iedjw Imvmopfx Ag Neih 6.5 kW (8.8 HP) motor 3-axis scoring unit with dual-sided tilt Table extension: 840 mm Double roller carriage, carriage length 3800 mm On/Off switch on double roller carriage Angle and miter stop CNC parallel fence: 1300 mm Laser cut line indicator Spraying device

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, cutting length (max.): 3,400 mm, cutting width at rip fence: 1,300 mm, saw blade diameter: 450 mm, table length: 840 mm, power: 6.5 kW (8.84 HP), Used machine GM010.0217 Year of manufacture: 2020 Iisdpfx Aew Imrbeg Nsh F45 ElmoDrive Machine height: 910 mm Eye-level operation Dual-sided tilting (+ / - 46°) Max. blade diameter: 450 mm 6.5 kW (8.8 HP) motor Table extension: 840 mm Double roller carriage with 3400 mm carriage length Miter angle stop CNC parallel fence 1300 mm Front support roller STEG, second support on the double roller carriage

Condition: excellent (used), CATALOG NUMBER 7644 Technical data: - max. diameter of the main blade with a scorer 350mm - max. diameter of the main blade without a scorer 450mm - cutting height with a 100mm blade installed - hydraulically adjustable main blade up/down + angle - electric angle display - electric adjustment of the scorer up/down, right/left - spindle diameter 30mm - spindle locking - with a format carriage - cutting length on the carriage 2800mm - cutting width at the guide 1440mm - with a side carriage - with a scorer - max. diameter of the scorer 120mm - spindle diameter 22mm - scoring motor 0.75kW - main motor 5.5kW - 4 types of rotation speeds - electronic rotation display - diameter extraction nozzle 120mm, 80mm - table top dimensions 1220x730mm - table top dimensions with extension 1230mm - table top dimensions with extension 2070mm - blade guard - dimensions length/width/height 2940x3400x1420mm - weight 1100kg ADVANTAGES – German production – with scoring saw – unpainted – used saw, very good condition Net price: PLN 29900 Net price: EUR 7040 Iiedpjwgdh Sjfx Ag Nsh Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations the price may change)

Condition: used, Year of construction: 1999, total length: 3,500 mm, total width: 2,200 mm, total height: 1,600 mm, Weight: 1.250 kg - Year: 1999 - Documentation available: No - Serial number: 99-11-62 - Transport dimensions: 3500mm x 2200mm x 1600mm (l x w x h) Ijdpoxdcupofx Ag Njih - Transport weight [kg]: 1250kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1996, sliding table length: 1500 mm cutting width at the fence: 700 mm cutting width at the cross cut: 2200 mm cutting depth: 100 mm scoring unit: no adjustment sawblade height: manuell / Kurbel adjustment sawblade tilting: manuell / Kurbel adjustment fence: manuell read out sawblade tilting: Digital read out cutting height: - read out fence: Scala read out crosscut: Scala saw blade diameter: 315 mm number of speeds: 1 motorpower: 4 kW motor brake: ja - automatisch suction connection: 80 mm und 120 mm machine length: 3000 mm machine width: 1700 mm Iisdpjxnhp Tofx Ag Neh weight: 900 kg

Condition: used, Panel saw ALTENDORF F45 - used - double roller carriage, tilting, parallel fence with fine adjustment, outrigger table, table extension, anodized aluminium, table width extension, anodized aluminium, mitre fence, overhead guard, narrow and wide ----- Technical specifications ----- Tilting range: 45°, Carriage length: 2,500 mm, Cutting width: 800 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Ijdpfx Asw Nv I Ujg Njih Extraction nozzle Ø: 80 / 120 mm