Sliding table saw

Altendorf F45

Condition: excellent (used), Year of construction: 1998, Swiveling panel saw F45 by Altendorf with 2-axis pre-scoring device in excellent condition Sliding table length 3200mm Virtually no cuts or major scratches on the sliding carriage Saw blade swivel from 0 to 45.5 degrees Speeds 3000, 4000, 5000 and 6000 rpm with electric speed indicator Reinforced drive motor 7.5kW with automatic motor brake Saw blade diameter up to 350mm, 400mm possible without the pre-scoring blade Cutting height max. 125mm Cutting width up to 1050mm Swivel angle and height adjustment hydraulically adjustable Rip fence up to approx. 3200mm Miter fence adjustable up to 45 degrees Gkjdpe Akh Abjfx Akhod Width fence foldable Dust extraction port 80 + 120mm, combined into 160mm Sliding carriage lockable (BOLT), allowing large panels to be placed on it Handle Rip fence shoe 1 used plastic saw blade with 2-axis pre-scoring device 3 riving knives 2-axis pre-scoring unit, electrically adjustable in side and height 2 safety guards 2 emergency stop switches Operating manual CE marking 2 V-belts and 2 grease dispensers renewed Very well-maintained machine with minor signs of wear on the anodized sliding table. Original paint, only touched up in places. Excellent condition as can be seen in the original photos; unfortunately, there is no operating hour counter installed, but the saw has not been used much. Dimensions approx. 3400 x 3100 x 1450mm (LxWxH). Weight approx. 1200kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "other offers from this supplier".

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, actuation type: electric, total height: 1,774 mm, total length: 4,580 mm, overall weight: 1,450 kg, Equipment: CE marking, documentation/manual, Workpiece thickness for edging: between 8 and 60 mm; edge thickness up to 8 mm depending on the unit. Components: - calibration, - edge feeding, - gluing, - end trimming, - milling group; flat or profiled milling of upper or lower edges, - profiling milling unit, - scraper group, - polishing station. Pressure bridge, infeed stop, control panel. Year: 2017. Refurbished in our workshop and inspected by a HOLZHER technician. Fitted with new diamond tools. Godpeytp Hrofx Akhjkd

Condition: used, Year of construction: 1996, Slide length: 3200 mm Cutting width at rip fence: 1300 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 145 mm Gkodpfx Ake Ai Em Eehod Scorer: yes Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: electric Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: - Rip fence display: digital readout Crosscut scale display: scale Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction port: 80 and 120 mm Machine length: 4000 mm Machine width: 2200 mm Weight: 1200 kg

Condition: used, Year of construction: 2008, Slider length: 3000 mm Cutting width at the rip fence: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 170 mm Scoring saw: no Saw blade height adjustment: electric Saw blade swivel adjustment: electric Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Gjdpfx Aj Ai Em Nokhskd Rip fence display: digital display Crosscut fence display: scale Saw blade diameter: 500 mm Speeds: 4 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3600 mm Machine width: 2200 mm Weight: 1200 kg

Condition: new, Year of construction: 2026, PREMIUM VERSION MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM RESOLUTION PRECISION, WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXIS. High-class CNC milling machine designed for the subtractive processing of materials, due to the whole range of configurations, it is used in many industries: industrial, electronics, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with user-friendly CNC control systems. Gsdpfx Akoiz S Haehjkd The price quoted is for the machine itself, excluding additional equipment, installation, transport and training. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Work table The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2010 x 3010mm, Dissection table with four independent vacuum sections. Drive SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions, The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor, Linear bearings: trapezoidal rails, Hiwin carriages. Spindle The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing - digital signal processing. The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to operate without having to load the program each time. We offer machine tools with real CE EU DTR - certified by the best in the EU. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2150x3200mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Power supply 400V Libra 1450 kg Machine dimensions 2680x3600x2200mm Table height 715mm Vacuum pump 7.5 kW (optional) Underpressure 440 mbar Guides linear Drivetrain toothed rack (Z axis - ball screw) Axle drives hybrid servo drives

Condition: used, Year of construction: 2011, Sliding carriage: 3000 mm Cutting width: 1300 mm CNC stop Motor: 5.5 kW Saw blade diameter: max. 500 mm 2-axis scoring unit Gksdpfj Aitc Ssx Akhod LED lighting Scoring unit control panel at eye level, swiveling Front table, swiveling Template holder Table extension 840 mm Angle/miter stop Location: Supplier

Condition: used, Year of construction: 1991, Altendorf F45 panel saw with a reinforced motor and spray system Used Altendorf F45 panel saw with a reinforced motor for sawing non-ferrous metals and a spray system. Manufacturer: Wilhelm Altendorf Model: F45 Machine type: Panel saw Year of manufacture: 1991 Cutting length: 3,000 mm Motor: Reinforced saw motor for processing non-ferrous metals Sliding table: Aluminum format sliding table Parallel stop: Available Cross stop: Available Spray system: For lubrication and cooling during sawing Spray system operation: Via amber switch Operation: Manual Gkedpfx Ae Aibipjkhsd Condition: Used

Condition: new, Year of construction: 2024, machine/vehicle number: Werksüberarbeitungsnummer: WÜAF25T68109, functionality: fully functional, power: 4 kW (5.44 HP), cutting width (max.): 1,000 mm, saw blade diameter: 315 mm, cutting length (max.): 3,200 mm, F25 basic equipment - Manual height and tilt adjustment 0–46° of the saw blade, with digital display - Drive power 4 kW (5.5 HP) at one speed, 4,200 rpm - Double roller carriage, carriage length 3,200 mm - Angle mitre fence, cross cuts up to 3,450 mm - Saw blade diameter max. 315 mm, saw blade projection max. 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 880 mm Gjdpfx Ajwwv Rmjkhokd Equipment package type 6 - 5.5 kW (7.5 HP), 2 speeds - Parallel fence, 1,000 mm - Riving knife with extraction - Preparation for scoring unit

Condition: used, Year of construction: 1993, machine/vehicle number: 93-11-247, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, tilt adjustment saw blade: 45 °, rotational speed (max.): 4,000 rpm, Fully functional machine from a model-making business. In good condition. Machine is available from week 51/2026. Gksdpe Akdltsfx Akhod

Condition: used, Year of construction: 1985, power: 5.5 kW (7.48 HP), Table saw, panel saw, Altendorf F45 Year of manufacture: 1985 From an insolvency liquidation, therefore no further technical data available. Please submit a bid. Location: Freising Gsdps Akb Dbjfx Akhokd Inspection possible. Sale to the highest bidder. We have other used machines available. Please contact us.

Condition: excellent (used), Year of construction: 2010, Altendorf F45 Elmo 3-axis control Carriage length: 3200 mm Cutting width at rip fence: 1300 mm Scoring unit: Prepared Saw blade height adjustment: electric / position control Gkjdpfx Asy Sbvkjkhsd Saw blade tilt adjustment: electric / position control Rip fence: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: digital readout Crosscut fence with mitre function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction port: 80 and 120 mm Duplex mitre fence Year of manufacture: 2010 Price: 15,500.-

Condition: repair required (used), Year of construction: 1993, Equipment: saw blade guard, scorer, For sale is a robust Altendorf F-45 panel saw from our carpentry workshop. Thanks to the long sliding table and the scoring unit, the machine offers an excellent basis for refurbishment or as a source of spare parts. Technical data & equipment: Machine no.: 93-1-53 (year of manufacture 1993) Sliding table length: 320 cm (double-roller carriage) Additional unit: Scoring unit available (was rarely used by us) Convenience: Automatic height and depth adjustment of the saw blade works well. Accessories: Stops and extraction system, see separate photos. Known defects (sold expressly as defective): Gsdpfx Ao Ai S A Rjkhskd The main motor no longer provides sufficient power (probably winding damage or bearing defect). The automatic tilting of the saw blade occasionally jams at approximately 25° tilt (needs to be cleaned or mechanically inspected). The machine was well-used and is being offered expressly as a repair-required DIY project / for export / for spare parts recovery due to the described defects. Collection & loading: Self-collection only in 41334 Nettetal. Loading assistance available: A forklift is on site, and we can load the machine onto your truck or suitable trailer free of charge during collection. The sale is made with the exclusion of any warranty, guarantee and liability for defects. No returns.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Blade carriage length: 3800 mm Cutting width: approx. 1,300 mm Saw blade diameter: 350 mm Saw blade tilt: up to 45° Gjdpfxo Ah R Ihe Akhekd Cutting speed: 3,000 - 4,000 - 5,000 and 6,000 rpm Blade motor power: 5.5 kW

Condition: used, Year of construction: 2025, New demonstration machine! Price on request! The CONTROL has always defined its own class – the premium class for vertical panel saws. But even this leading position doesn't stand still. We have developed the CONTROL into the premium class's vertical cutting center, with increased automation of the sawing process and additional equipment options. Above all, the 12" touchscreen computer and the new machine software ensure improved ease of operation in every detail. Saw frame: • Machine components manufactured to a precision of 1/100 mm • Solid, self-supporting, firmly welded, and torsion-resistant saw frame • Full-surface support table made of birch plywood with integrated small parts support • Auxiliary fence profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of the center support • Automatic roller locking during the sawing process Saw beam: • Stable, durable saw beam steel construction • Automatic saw beam locking with cutting interface detection Saw unit: • Backlash-free, smooth-running guides • Robust mounting of the motor carriage ensures high cutting accuracy • Powerful, high-torque 5.5 kW motor (7.5 HP) • More comfort thanks to largely automated operation • Laser-assisted display of the horizontal cut • Automatic motor carriage clamping • Automatic lowering and pivoting of the saw motor • Pneumatic clutch for easy switching to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake Control: • 12" touchscreen computer with optimal user guidance • Multilingual user guidance • Tool database guarantees high flexibility and absolute repeatability • Fully automatic sawing process • Infinitely variable feed speeds 10-25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hour counter • Network connection • UPS 24VDC for touch PC (uninterruptible power supply) Dimension setting: • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y including ABO (vertical axis for horizontal cuts) Mounting: • Wall or free-standing mounting possible Saw blade: 300 mm, scoring saw, 60 teeth Cutting range: L: 5300 x Hvert: 2240 / Hhor: 2100 x T: 80 mm, consisting of: 1.00 Cutting interface distance vertical 1000 mm 1.00 Language documentation DE 1.00 Saw motor 1-phase, 400V, 50Hz, EVO/CON 1.00 Feed speed 10-25 m/min 1.00 Scoring saw unit VSA (scoring saw infinitely adjustable) 4.00 Free-standing support, complete 1.00 Small parts support, aluminum, complete (2-part) 1.00 STRIEBIG ExpertCut CON consisting of: - Electronic positioning system EPS-X - Automatic saw beam positioning ASP - User guidance with STRIEBIG ExpertCut software license for 1 office workstation (network license) - Label printer - Network connection - Operating manual - Paper holder 1.00 UPS 24VDC for touch PC (uninterruptible power supply) 1.00 Block parts, initial license 1.00 Service: data import / label layout (remote) 1.00 Basic training STRIEBIG cutting optimization (online training) Gedozx E T Depfx Akhskd Storage location: Rieth

Condition: excellent (used), CATALOGUE NUMBER 8006 TECHNICAL DATA - max diameter of the main saw blade with scoring saw: 350mm - max diameter of the main saw blade without scoring saw: 450mm - cutting height with a 350mm blade installed: 100mm - electric adjustment of the main saw blade (up/down) + angle - electric angle display - electric adjustment of the scoring saw (up/down, left/right) - spindle diameter: 30mm - spindle locking - with a rip fence carriage - cutting length on the carriage: 3400mm - cutting width with fence: 1300mm - with a side carriage - with a scoring saw - max diameter of the scoring saw: 120mm - spindle diameter: 22mm - scoring saw motor: 0.75kW - main motor: 5.5kW - 4 types of rotation speeds - electronic speed display - diameter of the dust extraction port: 120mm, 80mm - table dimensions: 1220x730mm - table dimension with extension: 1440mm - table dimension with extension: 2060mm - blade guard - dimensions (L/W/H): 3550x3400x1500mm - weight: 1140kg ADVANTAGES - electric adjustment of the saw blade and scoring saw - with original fence Gjdpfx Akj Af I D Ashokd - carriage length: 3400mm - German-made - unpainted - used saw, very good condition Net price: 38900 PLN Net price: 9047 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to fluctuations in the exchange rate)