Used Amada for sale (218)

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, pressing force: 130 t, throat depth: 3,000 mm, distance between stands: 2,700 mm, stroke distance: 200 mm, TECHNICAL DETAILS Pressure: max. 130 t Cey79N89Cm Folding length: max. 3,000 mm Distance between the uprights: max. 2,700 mm Stroke: max. 200 mm Total power requirement: 7.5 kW Control system: Amada OP 2000 Controlled axes: y1, y2, x1, x2, z1, z2, r Recording: Amada-Promecam EQUIPMENT - Lasersafe Fissler for increased safety - 2-hand foot switch

Condition: ready for operation (used), Year of construction: 2001, operating hours: 36,102 h, Functionality: fully functional, machine/vehicle number: 258116, punching force: 20 t, feed length X-axis: 400 mm, feed length Y-axis: 1,270 mm, TECHNICAL DETAILS Punching operation working area: 2,000 (4,000) x 1,270 mm Control: Fanuc 18-P Max. material thickness: 3 mm Traversing speed X-axis: 65 m/min Y-axis travel speed: 50 m/min Axis simultaneous: 82 m/min Position deviation: ± 0.1 mm Number of stations in the turret: 31 AutoIndex stations: 3 (2 x B, 1 x C) Turret rotation speed: 25 rpm Max. number of punching strokes: 520/min Machine frame: Bridge frame Press drive: hydraulic Drives (turret + table drive): AC servo motors Clamping (clamping claws): pneumatic MACHINE DETAILS Length: 6,190 mm Width: 5,000 mm Height: 2,450 mm Machine weight: 12,000 kg Electrical connection: 400 V / 50 Hz Electrical consumption: 30 kVA Compressed air requirement: 6 bar, 250 l/min Cnl8Bsvr2G Operating hours: 36,102 h Parts counter: 88,493 pieces

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: A080052, pressing force: 81 t, working stroke: 200 mm, 8 Axis Sick 4000 light guards AMNC Amada CNC control 800kN maximum press force 200mm maximum stroke Crlwry82Xc A small quantity of tooling

Condition: excellent (used), Year of construction: 2015, This 4-axis press brake is in EXCELLENT condition and is available to purchase immediately. It was basically unused, total On Time is only 280 hours! All viewings are by appointment only. Amada tooling package included Bsmfjshb7P3 Running and under power with no faults Location: Burscough Capacity 1300 kN (130T) Beam length 3140mm Beam width 90mm Distance between frames 2700 mm Throat depth 420mm Open height 470mm Stroke 200mm Working height 960mm Oil capacity 100L Power consumption 12.5 kW Approach speed 100mm/s Maximum bending speed 10mm/s Weight 8150KG Dimensions 4535mm x 2620mm x 2805mm (L x W x H)

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, back gauge travel distance Z-axis: 1,000 mm, sheet thickness (max.): 6 mm, cutting length (max.): 3,100 mm, total width: 2,200 mm, total height: 2,100 mm, total length: 3,600 mm, overall weight: 6,250 kg, Maximum sheet thickness: 6mm Max. cutting length: 3100mm Cutting angle: 2.20° Length backgauge: 0 - 1000mm Approach speed: 100mm/sec. Dqoonf Operated mechanical or hydraulic:Hydraulic Power: 5.5kW Length: 3600mm Width: 2200mm Height: 2100mm Weight: 6250kg

Condition: used, Year of construction: 2007, pressure 50.0 t chamfer lenght 2090 mm distance between columns 1665 mm column arm 400 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec stroke 200 mm table height 960 mm dayligth 470 mm Number of working hours 8.400 h control CD 2005 total power requirement 6.0 KW weight of the machine ca. 4850 kg range L-W-H 2950 x 1820 x 2450 mm very well maintained condition with only approx. 8.400 operating hours (!!) - in checked condition - machine video - ?v=FAkDFTi4LEk Equipment: - CNC electro-hydraulic press brake - CNC AMADA "CD 2005" graphic CNC control * compact design, small + portable * maximum ease of use Ctoc33Dip3 * LCD screen * automatic angle calculation - CNC controlled axes Y1+Y2 - X -R - CNC-controlled back stop adjustment (X-axis) - CNC-controlled vertical adjustment of the stop fingers (R-axis) - 4x manual adjustment of the stop fingers left-right (Z axes) - AMADA System A upper tool clamp with wedge camber * including 1x set of split deer foot upper tools - 1x set of split lower tools - motorized FIESSLER safety device front - 1x freely movable double foot switch - original operating instructions

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, pressing force: 220 t, bending length: 3,000 mm, stroke distance: 180 mm, TECHNICAL DETAILS Pressure: max. 220 t Folding length: max. 3,000 mm Stroke: max. 180 mm Control: Delem DA 58 Controlled axes: y1, y2, x, r, z1, z2 Dqjubp Tool holder: Amada-Promecam MACHINE DETAILS Total power requirement: 17 kW Machine weight: approx. 12,000 kg Dimensions: 3,660 × 2,380 × 2,800 mm EQUIPMENT - Safety doors behind the machine - 2-hand foot switch

Condition: like new (used), Year of construction: 2001, AMADA MODEL HFT 103 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 100/3 downstoke CNC Press brake Year 2001 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 7300 kg Bed Length 3000 mm Bed Width 180 mm Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Bfos8Iz2Wrd Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Year of construction: 1998, Condition: good (used), AMADA PROMECAM ITS2 2512 CNC PRESS BRAKE MAKE AMADA PROMECAM, MADE IN FRANCE MODEL ITS2 2512 YEAR 1998 CONTROL OPERATEUR 2 TONNAGE 25 TONS Dmbsnh LENGTH 1250.0 mm NO OF AXES 4 AXIS CNC GUARDING SICK OPERATOR LIGHT GUARD TOOLING FULL SET OF CLAMPS PLUS UPSTROKING HYDRAULIC PRESS BRAKE FOOT CONTROL PENDANT FULL SET OF MANUALS FULL SET OF CLAMPS SET OF TOP AND BOTTOM TOOLING

Condition: good (used), Year of construction: 2002, Machine in good working condition. Can be inspected upon appointment. Bottom table with V-shaped slots 13X Wilson Tool clamping system Backgauge (5 axes) type "B.BL Touch screen multimedia control AMNC-PC Working hours: 29812h Large set of tooling included (cf. picture) Cotm7Rb7C8 Availability: 03/2025 Max bending force 800 kN (80T) Min bending force 70 kN (7T) Working length 2570 mm Press beam length 2570 mm Passage between uprights 2125 mm Distance 420 mm Press beam heading 200 mm

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 700 h, Display machine, fewer working hours, very good condition, many extras - spare attachments, some grinding wheels. CE certificate, available from July 24 Docjin

Condition: used, Year of construction: 2000, pressure 170 t chamfer lenght 3170 mm distance between columns 2700 mm column arm 420 mm dayligth 470 mm stroke 200 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec table width 180 mm table height 960 mm oil volume 235 L 0 300 bar controlled axis 6 Anzahl Number of working hours 29.400 h total power requirement 16.5 KW weight of the machine ca. 11910 kg range L-W-H 4025 x 2020 x 2900 mm well-maintained condition (!!) with only approx. 29.400 operating hours - in checked condition - machine video - ?v=APP0HZjMms4 Equipment: - electro-hydraulic CNC press brake - AMADA CNC control "OPERATEUR 2" - 6 axes (X, Y1 + Y2, R, Z1 + Z2) * swiveling operation - front left Csms8M8Pyg * tool & program library - CNC-controlled back stop adjustment (X-axis) * adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R-axis) * adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1 + Z2) - hand control unit for manual movement of the axes - AMADA manual upper tool clamping system - AMADA Rehfuß upper tools - divided - AMADA Lower tool holder - incl. 1x V die (not complete) - AMADA DIGI PRO - gigital angle measuring system - 1x freely movable double foot switch - side protective device (swinging doors) - rear protective device (swinging door) - EMERGENCY OFF button at the front - Operating instructions (ENG)

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, pressing force: 125 t, working stroke: 180 mm, surfacing fence length: 4,100 mm, TECHNICAL DETAILS Pressure: 125 t folding length: 4,100 mm Stroke: 180 mm Control: Operator 2 Dqjt22 controlled axes: y1, y2, x1, x2, r1, r2, z1, z2 MACHINE DETAILS Machine weight: approx. 10,000 kg Space requirement: approx. 4,500 x 1,700 x 2,800 mm EQUIPMENT - foot switch

Condition: excellent (used), Year of construction: 1999, AMADA 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 8 axis cnc control AKAS FEISSLER machine mounted laser electronic guards,side and rear interlocked fencing Type: HYDRAULIC DOWNSTROKING CAPACITY 100 TONS CONTROL OP 2000 CNC HFE CONTROL NO OF AXIS EIGHT X 1 Y 1 -Y 2 R1 R2 Z1 Z 2 BENDING LENGTH 3110mm OPEN HEIGHT 470 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR SIZE 7.5 KW APPROACH SPEED 100 BENDING SPEED 10 RETURN SPEED 100 Bbgshrba2Ah SERIAL NO. V 990908 CAN BE DEMONSTRATED UNDER POWER

Condition: good (used), AMADA PROMECAM ITP2 5020 CNC PRESS BRAKE MAKE AMADA PROMECAM, MADE IN FRANCE Chccmutbrw MODEL ITP2 5020 CONTROL CNC EMA TONNAGE 50 TONS LENGTH 2000.0 mm NO OF AXES 3 AXIS CNC SAFETY GUARDS SICK LIGHT GUARD TOOLING YES PLUS FULL SET OF CLAMPS UPSTROKING PRESS BRAKE QUANTITY OF TOOLING

Condition: used, Year of construction: 1996, pressure 100 t chamfer lenght 3110 mm distance between columns 2700 mm column arm 400 mm dayligth 470 mm stroke 200 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec table width 90.0 mm table height 960 mm oil volume 115 l 0 287 bar controlled axis 8 Anzahl Number of working hours 17.575 h total power requirement 7.5 KW weight of the machine ca. 6750 kg. range L-W-H 3680 x 2185 x 2635 mm very good / well-maintained condition (!!) with only 17.575 operating hours - in checked condition - machine video - ?v=BXxlx7s8sYY Cntg3Fifjk Equipment: - CNC electro-hydraulic press brake - CNC control AMADA OPERATEUR - CNC controlled 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) - swiveling control panel, front left - CNC-controlled back stop adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R1+R2 axis) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - upper tool holder with wedge camber - side protective device (swivelling doors) - rear protective device (swivelling door) - 1x 2-hand control / 1x foot switch - CE marking - original machine documentation

Condition: ready for operation (used), Year of construction: 2008, operating hours: 15,707 h, Functionality: fully functional, laser power: 4,000 W, sheet thickness (max.): 12 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, TECHNICAL DETAILS Laser power: 4,000 W X-axis travel: 2,520 mm Y-axis travel: 1,550 mm Z-axis travel: 300 mm Max. Sheet thickness: approx. 12 mm Table load: 330 kg Ctexaq9Ali MACHINE DETAILS Total operating hours: 39,777 h Operating hours: 15,707 h Cutting time: 8,326 h Machine weight: approx. 7,700 kg EQUIPMENT - AF400i-D control system - cooler - Extraction unit - transformer - Light barrier

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, year 2000 stock no. 01748 specification AMADA LASMAC 2415 SERIES III 2 KW LASER CUTTING MACHINE MACHINE CAPACITY 1550 X 2520 MODEL LASMAC LC2415A III 2 KW FANUC OSCILLATOR 2000kw CONTROL FS-160i-LCONTROL MAX LASER OUTPUT 2000 MAX CUTTING FEEDRATE M/PER/MIN 20 Bkxudadwhzm RAPID AXIS SPEED M/PER/MIN X & Y 80 RAPID AXIS SPEED M/PER/MIN Z 80 MAX SHEET SIZE WITH ONE REPOSITION 1550 X 5040 INCLUDES ONE REPOSITION MAX MATERIAL THICKNESS 9mm M.S. MAX MATERIAL THICKNESS (STAINLESS WITH OXYGEN CUT) 9mm S.S.OXYGEN CUT MAX MATERIAL THICKNESS (STAINLESS WITH CLEAN CUT) 6mm S.S.CLEAN CUT MAX MATERIAL THICKNESS ( ALUMINIUM A5052) 4mm ALUMINUM MAX SHEET WEIGHT 330 KG. WORK SHUTE 1550 X 550 EXTRACTION UNIT CHILLER TRANSFORMER SERIAL NUMBER 25580494

Condition: good (used), AMADA PROMECAM APX 50.20 CNC 7 AXIS PRESS BRAKE Chbo0Zn32E MAKE AMADA MODEL PROMCAM APX 50.20 YEAR 1995 CONTROL OPERATEUR 2 CAPACITY 50 TONS BENDING LENGTH 2050.0 mm OPEN HEIGHT 370.0 mm STROKE LENGTH 100.0 mm THROAT DEPTH 400.0 mm MOTOR POWER 9 KW TBC WEIGHT 6400 KG PLUS 7 AXIS- Y, R1,R2,X1,X2,Z1,Z2 COLOURED GRAPHIC SCREEN FULL SET OF TOOL CLAMPS SICK OPERATOR SAFETY LIGHT GUARDS

Condition: good (used), Year of construction: 2004, Functionality: fully functional, back gauge: 600 mm, pressing force: 100 t, bending length: 3,000 mm, working stroke: 200 mm, Bending cell/press brake with bending robot and automatic loading and unloading TECHNICAL DETAILS Control system: AMNC II PC Pressure: 100 t Folding length: 3,000 mm Stroke: 200 mm Control system: AMNC II PC Projection: 415 mm Installation height: 500 mm Adjustment range: Back gauge: 600 mm Weight: 10 tons Dqooqt EQUIPMENT - Automatic loading and unloading by robot - Bending robot to support the bending process

Condition: good (used), Year of construction: 1997, Model ... Vipros 20-50-50 Frame Construction ... Bridge Type Press Capacity ... 20 Tonnes (196kN) Press Type ... Servo Controlled Hydraulic Ram Axis Traverse Distance ... 1270 mm x 1270 mm Workable Max. Sheet Size . 1270 mm x 2540 mm (with auto repositioning) Maximum Material Thickness ... 6.35 mm Mild Steel Max. Material Weight ... 105 Kg Max. Material Weight (Max Speed) ... 62 Kg Max. Hole Dia. ... 88.9 mm Number Of Stations ... 31 Stations: 19 x 12.7 mm 6 x 31.7 mm 1 x 50.8 mm 2 x 88.9 mm Auto Index 2 x 31.7 mm 1 x 50.8 mm Axis Speed ... 82 m/min Hits Per Minute (2mm Pitch) ... 1000 H.P.M./2.5mm Stroke (25.4mm Pitch) ... 340 H.P.M./8mm Stroke Turret Speed Bi-Directional ... 35 R.P.M. Punching Accuracy ... ± 0.07 mm Punching Accuracy (High Accuracy Mode) ... ± 0.05 mm Csiaw9G2 Repeatability ... ± 0.015 mm Ram Stroke Length (Maximum) ... 40 mm Axis Drive ... AC Servo Motor Turret Drive ... AC Servo Motor Electric Power Required ... 22 kVA 400V +/- 10% 50 Hz Air Pressure Required ... 5.0 kgf/cm² Air Flow ... 250 1/min Machine Length ... 5030 mm Machine Width ... 2630 mm Machine Height ... 2160 mm Machine Weight ... 9200 kg NC SPECIFICATION Model of NC ... FANUC 18-P Axis ... 3 Axis Simultaneous + PHNC Tape Code ... EIA or ISO (Automatic Recognition) Programming Mode ... Absolute/incremental Min. Input ... 0.01 mm (0.01°) Max. Input ... 99999.99 mm Preparatory Function ... G - 2 Digit T Function ... T - 3 Digit M Function ... M - 3 Digit Single Block ... Yes Block Delete ... Yes Optional Stop ... Yes Editing ... Yes Manual Data Input ... Yes Memory Capacity ... 64 Kb No. Of Programs ... 200 Machine Operation ... Memory Interface ... RS 232 C

Condition: like new (used), Year of construction: 2004, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstoke CNC Press brake Year 2004 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Brztilamsvo Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2008, AMADA Model HFP 100-3 - Year 2008 Type CNC Multi axis press brake 100 tons capacity x 3100 Bf9Mtlkckg Serial Number A080073 Control AMNC 7 axis machine Length mm 3950 Width mm 1700 Height mm 2750 Weight kg 7100 Electrical 400V, 50hZ Electrical Consumption kW 9 Tool Type Amada Top Tool Clamping Fast clamping Crowning Erwin Sick C 4000 machine mounted electronic safety guard side and rear interlocked fencing Stroke mm 350 Opening mm 370 Between Columns mm 2705 Amada Digipro Handwheel Barcode reader

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, year 2008 stock no. 01930 specification 7 AXIS CNC 50 TONS X 2000 HYDRAULIC DOWNSTROKING PRESS BRAKE description TYPE HYDRAULIC DOWNSTROKING CAPACITY 50 TONS CONTROL OP 2000 CNC NO OF AXIS SEVEN X 1 X 2,Y 1 Y 2, R 1 , Z1 & Z2 BENDING LENGTH 2000 mm OPEN HEIGHT 470 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR SIZE 7.5 KW Bl0B2H0Lbxn APPROACH SPEED 100 BENDING SPEED 10 RETURN SPEED 100 SERIAL NO GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED price 38000

Condition: excellent (used), Year of construction: 1995, AMADA PEGA 367 45 STATION 4 AUTO-INDEXING UNITS FANUC – 04PC CNC CONTROL MACHINE SPECIFICATION MODEL PEGA 30-60-72 FRAME CONSTRUCTION BRIDGE TYPE PRESS CAPACITY 30 TONS AXIS TRAVERSE DISTANCE 1550 mm x 1830 mm MAX. SHEET SIZE (WITH ONE REPOSITION) 1550 mm x 3660 mm MAX. MATERIAL THICKNESS 6.35 mm M.S. MIN. MATERIAL THICKNESS 0.8 mm M.S. MAX. MATERIAL WEIGHT 100KG. MAX .HOLE DIA. 114.3 mm NUMBER OF STATIONS 45 STATIONS 24 X 12.7mm 12 x 31.7mm 2 x 50.8mm 1 x 88.9mm 2 x 114.3mm AUTO-INDEX STATIONS 2 x 31.7mm 2 x 50.8mm AUTO-INDEXING SPECIFICATION ANGULAR MOVEMENT INCREMENTS OF 0.01 MIN. DIE CLEARANCE 0.15 mm MAX. MATERIAL THICKNESS 6.35mm M.S. TOOL ROTATION SPEED 60 R.P.M. MA ANGULAR NIBBLING MOVEMENT 350 S.P.M. 8.0 deg. ----- WORK CHUTE 200 mm x 200 mm AXIS SPEED 50 M/MIN. STROKES PER MIN 350 HITS PER/MIN (ONE INCH INTERVALS) 200 TURRET SPEED BI-DIRECTIONAL 30 R.P.M. POSITIONAL ACCURACY +/- 0.10mm RAM STROKE LENGTH 32 mm AXIS DRIVE & TURRET DRIVE AC SERVO-MOTOR PRESS MOTOR 5.5 KW POWER REQ. 17 K.V.A. 400V +/-10% 50 HZ AIR PRESSURE REQ. 5.7 kgf/cm/2 AIR FLOW 80 LITRE PER/MIN CLUTCH/BRAKE HYDRAULIC COMBINATION CRANK SHAFT ECCENTRIC MACHINE LENGTH 5331 mm MACHINE WIDTH 3770 mm MACHINE HEIGHT 22375 mm Chpvklowfu MACHINE WEIGHT 14000 kg 04P-C SPECIFICATION AXIS X, Y & T TAPE CODE EIA OR ISO MODE ABSOLUTE/INCREMENTAL MIN. INPUT 0.01 mm MAX. INPUT 99999.99 mm PREPARATORY FUNCTION G - 2 DIGIT T FUNCTION T - 3 DIGIT M FUNCTION M - 2 DIGIT TAPE READER PHOTOELECTRIC HOME POSITION AUTOMATIC OR MANUAL SINGLE BLOCK YES BLOCK DELETE YES OPTIONAL STOP YES EDITING YES MANUAL DATA INPUT YES MEMORY CAPACITY 60M OF TAPE STORAGE MA NO OF PROGRAMS 95 CRT DISPLAY 15 LINES 32 CHARACTERS MACHINE OPERATION MEMORY OR TAPE PUNCH INTERFACE RS 232 C