Used Amada Turret Punch for sale (216)

Condition: not inspected (used), Year of construction: 2010, functionality: unexamined, machine/vehicle number: 173, punching force: 30 t, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,525 mm, feed rate X-axis: 100 m/min, controller model: AMNC-F (FANUC 180i-PB), No minimum price – guaranteed sale to the highest bidder! Auction of an AMADA EMZ-3610 NTZ including LKI MP SheetCat 3015 manipulator! Bidding obligates timely collection between 23.03.2026 and 27.03.2026! AMADA EMZ-3610 NTZ TECHNICAL DETAILS Punching force: 300 kN Turret capacity: 45 stations Max. material size: 1,525 × 5,000 mm Max. material thickness (mild steel): 4.5 mm Max. material weight (F1): 50 kg Max. material weight (F4): 150 kg Travel range X-axis: 2,500 mm Travel range Y-axis: 1,525 mm Feed speed X-axis: max. 100 m/min Y-axis: max. 80 m/min Strokes per minute 1 mm pitch (5 mm stroke): 780 rpm 25.4 mm pitch (5 mm stroke, X-axis): 500 rpm 25.4 mm pitch (5 mm stroke, Y-axis): 330 rpm Max. stroke length: 37 mm Turret indexing speed: 30 rpm Positioning deviation: 0.07 mm MACHINE DETAILS Connected load: 27 kVA Compressed air requirements Base machine functions & air blow: 250 l/min POWER VACUUM (EMK) / AIR JET VACUUM (EMZ): 250 l/min Operating pressure: 5 bar Control unit Controller: AMNC-F (FANUC 180i-PB) Controlled axes: 4 axes (X, Y, T, C) + A-axis Programming: metric or inch Dimensions & Weight Approx. dimensions (L x W x H): 5,422 x 5,120 x 3,241 mm Height without leveling elements: 2,317 mm Height with mirror: 3,241 mm Machine weight: approx. 24.5 t LKI MP SheetCat 3015 TECHNICAL DETAILS Max. sheet size: 3,050 × 1,525 mm Min. sheet size: 1,000 × 300 mm Sheet thickness: 0.5–6.0 mm Max. sheet weight: 300 kg Max. load per pallet: 3,000 kg Max. pallet stack height: 300 mm Max. load, stacking table: 4,000 kg Cycle time (continuous production): approx. 37 s Max. movement speed loading unit: 60 m/min Max. movement speed unloading unit: 30 m/min Kwsdpeycqm Sofx Ahzst MACHINE DETAILS PLC: Mitsubishi Q-Series Operating terminal: Beijers E1032 Dimensions & Weight Approx. dimensions: 5,775 x 3,775 x 3,100 mm Approx. weight: 4,100 kg Max. compressed air requirement: 750 l/min EQUIPMENT 2x chip trolleys, Bauer EXPO 150, year: 2023 34 vacuum suction cups 3 separation magnets/pallets Double sheet detection with thickness measurement Note: Control parameters are missing.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 17,200 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, cutting range flat at 90° (X-axis): 2,500 mm, cutting range flat at 90° (Y-axis): 1,270 mm, AMADA EM2510NT CE (2005) | 20t CNC Turret Punch Press | NT Semi-Automatic | PLN 180,000 net For sale: AMADA EM2510NT CE CNC turret punch press from 2005. The machine is fully operational, currently in continuous use, and can be powered on and tested on site. CE version. Kwodpfx Aeyapzcohzet ⚠️ Sale includes the machine only – WITHOUT TOOLS ✅ Key information: • Manufacturer / Model: AMADA EM2510NT CE • Year of Manufacture: 2005 • Type: CNC turret punch press • Punching force: 20 tons / 200 kN • Operating hours: 17,200 h • Condition: fully functional, ready for operation • Last inspection: November 2025 • No faults/alarms on the controller • Machine testing available on site _____ ✅ Technical specifications: • Working area: 2500 × 1270 mm • Sheet re-positioning: up to 5000 × 1270 mm • Max. sheet thickness (mild steel): 3.2 mm • Control: AMADA • Tool turret _____ ✅ Automation (NT) Machine equipped with NT system – semi-automatic: • streamlines sheet feeding/positioning • increases production efficiency ⚠️ Note: This is a semi-automatic system (not full automatic loading/unloading). _____ ✅ Scope of supply: ✔ AMADA EM2510NT CE punch press ✔ complete, operational machine with fixed auxiliary equipment ✔ documentation/manuals NO TOOLING (tooling is not included in the sale) _____ ✅ Application Ideally suited for: • sheet metal component production • perforation and technological hole punching • enclosures, covers, panels, control cabinets • parts for welding and bending _____

Condition: like new (used), Year of construction: 2001, AMADA EUROPE 245 Turret Punch Press Technical Specifications: - CNC Control: FANUC 18 i-P - Pressing force: 20 tons - Max. punching format without repositioning with a 31-station head: 1020 x 1290 mm (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - Max. sheet size with repositioning: 1020 x 2540 mm - Max. sheet size with repositioning + 1 rotation (optional): 1500 x 2540 mm - Max. sheet thickness on ball table: 6 mm - Max. sheet thickness on brush table: 3 mm - Max. permissible table load: 100 kg - Punching accuracy: ±0.1 mm - Positioning accuracy: ±0.07 mm - Number of pneumatic clamps: 2 - Number of simultaneously controlled axes: 3 (X, Y, C) - Turret rotational speed: 25 rpm - Strokes per minute, spacing 25.4 mm, cylinder stroke 6.5 mm: 220 spm - Strokes per minute, incremental punching 1 mm, cylinder stroke 6.5 mm: 480 spm - Minimum programmable increment: 0.001 mm - Number of tool stations: 31 (including 3 indexable stations) - Max. tool diameter: 88.9 mm - Indexable stations: 2x 1-1/4", 1x 2" - Max. sheet thickness for indexable station: 3 mm - Slider: hydraulic - Lower dead point of slide feed: 4 programmable positions - Working table size: X=600, Y=400 mm - Memory capacity: 64 KB (~63 programs) - Graphic display: 10.4" LCD - Stopping time: 295 ms - Air pressure: 5 bar - Air consumption: 250 Nl/min - Oil capacity: 160 L - Light curtain (3 beams): standard in European countries - Installed power: 27 kW - Machine dimensions: L=4460 mm, W=2750 mm, H=2130 mm - Transport dimensions: L=4820 mm, W=2500 mm, H=2414 mm - Machine weight (AMADA EUROPE 245): 10,000 kg - Operating hours: 35,000 hours Year of manufacture: 12/2000, installation: 2001 Single owner, complete service book with full machine history. The machine is in perfect condition, operated only on thin sheets. Start-up warranty. Operator training included in the price. Kjdpfxshvaaaj Ahzewt Contact person: 500114006 Best regards.

Condition: used, Offer 41414 Guide unit for punching tool suitable for AMADA type EMK 3612 Kwodpfx Ajxhfhmjhzot

Condition: used, Year of construction: 1998, machine/vehicle number: 100057, 1998 AMADA VIPROS 2510 KING The punching machine is in good condition, always serviced on time by Amada service. All documentation is included. This machine can be operated with a punching force of 196 kN. Made in Japan. The punching machine is still under power and can be tested at any time in Vilnius, Lithuania. Specification: Kwsdpom Ncayefx Ahzot Model: AMADA VIPROS 2510K Serial no: 100057 Year: 1998 Made in: Japan Punching force: 20 tons Stations: 31 Tools: included (RO 6; RO 6,5; RO 3; RE 30x5; RE 25x5; RE 80x5; RO 5; RO 3,5; RE 10x3; RE 10x5; RE 50x5; RE 8x12) Maximum sheet thickness: 3 mm X-axis movement: 2500 mm Y axis travel: 1270 mm Weight: 11 000 kg Location: Vilnius, Lithuania Testable: Yes If you have any questions, please do not hesitate to contact us.

Condition: used, functionality: fully functional, Year of construction: 1987, sheet thickness steel (max.): 4 mm, travel distance X-axis: 600 mm, compressed air connection: 5 bar, overall weight: 3,900 kg, I stopped producing garden furniture and that`s why I sell it. Good and reliable japanese machine. Many tools,some are brand new Amada original turrets. Manual book exist. Kodpfx Asxvmq Eohzewt

Condition: excellent (used), Year of construction: 2002, Model .Amada. Vipros 368 King Stock number 01967 Year of manufacture 2002 Frame Construction ... Bridge Type Press Capacity ... 30 Tonnes (294 kN) Press Type ... High Speed Hydraulic Servo Ram Axis Traverse Distance ... 1525 x 2000 mm Workable Max. Sheet Size ... 1525 x 4000 mm (with auto repositioning) Max. Material Thickness ... 3.2 mm mild steel Max. Hole Dia. Max. Material ... . (shearing strength 36 kg/mm2) 82 mm dia Max. Material Weight ... 75 Kg Max. Material weight ( Max. Speed) ... 60 Kg Max. Hole Dia. ... 114.3 mm Number Of Stations ... 58 stations:24 x 12.7 mm 24 x 31.7 mm 4 x 50.8 mm 2 x 88.9 mm Auto Index 2 x 31.7 mm 2 x 114.3 mm Axis Speed ... 113.0 m/min Hits Per Minute (2mm pitch) ... 860 H.P.M./3 mm stroke (8mm pitch) ... 560 H.P.M./3 mm stroke (25mm pitch) ... 460 H.P.M./3 mm stroke Turret Speed Bi-Directional ... 30 R.P.M. Punching Accuracy ... ± 0.1 mm (incl. 1 reposition) Ram Stoke Length (maximum) ... 40 mm Tool Lubrication ... Air Blow System Axis Drive ... AC Servo Motor Turret Drive ... AC Servo Motor Electric Power Required ... 28 kVA 400V +/- 10% 50Hz Air Pressure Required ... 5.0 Kgf/cm2 Air Flow ... 250 1/min Cooling Water Flow ... Min 40 1/min. Machine Length ... 5025 mm Kjdpjvn D Tfefx Ahzjwt Machine Width ... 4120 mm Machine Height ... 2630 mm (3190 mm to mirror) Machine Weight ... 18000 Kg

Condition: not inspected (used), functionality: unexamined, Year of construction: 2009, operating hours: 69,572 h, machine/vehicle number: 28510308, sheet thickness (max.): 20 mm, table height: 940 mm, travel distance X-axis: 3,270 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 100 mm, No Reserve Price – Guaranteed Sale to the Highest Bidder! Auction of an Amada Laser Cutting System + Storage Tower! Placing a bid obligates the buyer to collect the equipment within the specified period: from March 23, 2026, to March 27, 2026! AMADA LC-3015 F1 NT TECHNICAL DETAILS Travel X-Axis: 3,270 mm Travel Y-Axis: 1,550 mm Travel Z-Axis: 100 mm Travel B-Axis: 21 mm Cutting Area X-Axis: 3,070 mm Cutting Area Y-Axis: 1,550 mm Cutting Area Z-Axis: 100 mm Cutting Speed X/Y: 0 – 60 m/min Rapid Traverse X/Y/Z: up to 120 m/min Table Height: 940 mm Workpiece Weight: 920 kg Mild Steel Thickness: up to 20 mm Stainless Steel Thickness: up to 12 mm Aluminum Thickness: up to 10 mm MACHINE DETAILS Control: AMNC-F Control Type: Path Control Controlled Axes: X, Y, Z, B Kwedjycqfuspfx Ahzjt Simultaneously Controlled Axes: X, Y, Z Laser Model: FANUC AF4000i-B Laser Type: CO₂ Laser Laser Class: 4 Laser Radiation: invisible Laser Principle: AC-HF excited, fast axial flow Rated Power: 4,000 W Max. Power: 4,000 W Peak Power: 5,000 W Stability: ±2% Frequency Range: 5 – 2,000 Hz Pulse Duty Cycle: 0 – 100% Wavelength: 10.6 µm Laser Beam Diameter (Output): 27 mm Laser Beam Divergence: < 2 mrad Cooling & Supply Cooling Water Flow Rate: > 160 l/h Power Supply: 55 kVA Positioning Laser Laser Class: 3R Laser Radiation: visible Rated Power: < 5 mW Pulse Duration: CW Wavelength: 0.6 – 0.7 µm Laser Medium: Semiconductor or HeNe Drive Type: Linear Drives Cutting Gas Control: automatic Machine Weight: approx. 11,000 kg Storage Tower ASLUL 300 F1 (Year of manufacture 2009) TECHNICAL DETAILS Cycle Time: approx. 3 min Pallet Change Time: approx. 50 s Raw Sheet / Unloading Pallets: 2 + 4 or 3 + 3 Pallet Weight: max. 3,000 kg Sheet Size: max. 3,000 × 1,500 mm Sheet Size: min. 2,000 × 1,000 mm Material Thicknesses Automatic Mode: 0.8 – 20 mm Shuttle Mode: 0.8 – 25 mm Load Data Sheet Weight: max. 920 kg Load on Cutting Pallet: max. 920 kg Stack Heights Raw Sheet Pallet Stack Height: max. 150 mm Unloading Pallet Stack Height: max. 220 mm Finished Part Size Finished Part Size (X × Y), free cut: min. 225 × 180 mm MACHINE DETAILS PLC: Mitsubishi Q Series Operator Interface: Beijer E1060 Dimensions & Weight Dimensions (L x W x H): approx. 4,630 x 4,225 x 6,000 mm Total Weight: approx. 11,000 kg EQUIPMENT Double Sheet Detection Note: The power supply displays an error message and may be faulty.

Condition: used, Amada Mega BS 400 SA, with swivel base, Dec 1989 Kodpfx Asx Rkycshzowt

Condition: ready for operation (used), Year of construction: 2005, controller manufacturer: AMADA, stroke length: 200 mm, overall weight: 11,600 kg, pressing force: 173 t, This AMADA HFE170-3 press brake was manufactured in 2005. It features a maximum press force of 1700kN and a stroke up to 200mm. Weighing 11600kg, it operates on 400 Volts 50 Hz with a foreseen power of 16.5kW. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Voltage: 400 volts • Frequency: 50 hz • Nominal current: 286a • Foreseen power: 165kw Extra Information Ksdpfoyap Rwjx Ahzewt Machine still under power

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Amada CNC-controlled turret punching machine, type VIPROS 368 KING. The machine is equipped with a loading system type PR 300 and an unloading system type MP 300. Kedpfxjx Sq Ips Ahzowt

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Kwsdpfxjw Iq Ugs Ahzst Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: used, Year of construction: 1989, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 min angle adjustable from - to 15 - 150 Grad engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel Kwedpjxaa N Njfx Ahzot - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : ?machineno=1008-9397088

Condition: used, Year of construction: 2007, sheet width 3050 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm 8.00 mm down holder 10 Stück cutting angle 0°40 - 2°20 Grad 3340 mm work height max. 860 mm 575 mm Control GP 37W2 13 - 33 0 max. 315 bar oil volume 100 ltr. total power requirement 6.0 kW weight of the machine ca. 6030 + 1850 kg In good condition (!!) current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control including information display * Main display with 4 control panels * Control/operation of all functions * Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge * Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line illumination for viewing the scribe line * ??Shear cutting according to the optical scribe line - Manually adjustable table support plates, including ball transfer units * Grip recesses in the front support table - 2x freely movable foot switches - Operating instructions + circuit diagram SPECIAL ACCESSORIES included: - Backgauge system with 3 stations + separate control: * STATION 1 - AMADA conveyor belt with pneumatic sheet support device Ksdpfsxaaghsx Ahzowt * STATION 2 - AMADA conveyor belt with pneumatic scrap deflector * STATION 3 - AMADA stacking device with scissor lift table device - Wooden box with spare knives - 1x AMADA extra-long side stop, with support foot * Length approx. 3.000 mm - 2x AMADA extra-long front support arms

Condition: used, Year of construction: 2000, pressure 170 t chamfer lenght 3170 mm distance between columns 2700 mm column arm 420 mm dayligth 470 mm stroke 200 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec table width 180 mm table height 960 mm oil volume 235 L 0 300 bar controlled axis 6 Anzahl Number of working hours 29.400 h total power requirement 16.5 KW weight of the machine ca. 11910 kg range L-W-H 4025 x 2020 x 2900 mm well-maintained condition (!!) with only approx. 29.400 operating hours - in checked condition - machine video - ?v=APP0HZjMms4 Kwedpfx Ahjxabgpozst Equipment: - electro-hydraulic CNC press brake - AMADA CNC control "OPERATEUR 2" - 6 axes (X, Y1 + Y2, R, Z1 + Z2) * swiveling operation - front left * tool & program library - CNC-controlled back stop adjustment (X-axis) * adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R-axis) * adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1 + Z2) - hand control unit for manual movement of the axes - AMADA manual upper tool clamping system - AMADA Rehfuß upper tools - divided - AMADA Lower tool holder - incl. 1x V die (not complete) - AMADA DIGI PRO - gigital angle measuring system - 1x freely movable double foot switch - side protective device (swinging doors) - rear protective device (swinging door) - EMERGENCY OFF button at the front - Operating instructions (ENG)

Condition: used, Year of construction: 2001, pressure 50.0 t chamfer lenght 2090 mm distance between columns 1665 mm column arm 400 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 92.0 mm/sec stroke 200 mm table height 910 mm dayligth 470 mm Number of working hours 36.160 h total power requirement 6.0 KW weight of the machine ca. 4850 kg range L-W-H 3458 x 2450 x 2450 mm with only approximately 36.160 operating hours (!!) - Inspected condition - Machine video - ?v=x8Z0h2_wA6s Ksdpfxjxabuto Ahzjwt Equipment: - CNC electro-hydraulic press brake - CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X-axis) * CNC-controlled vertical adjustment of the stop fingers (R1+R2) * CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) * Hand control unit for manual axes movement * Pivoting control, front left - AMADA/PROMECAM quick clamping system for the upper tool * 1 split set of offset upper tools (UKB 10.512) - AMADA/PROMECAM bottom tool holder * 1x split set of 1-V dies (UKB 20.810) - Side guards (hinged doors) - Rear guards (hinged door) - CE marking - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 1996, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm table width 60.0 mm table height 910 mm Number of working hours ca. 37.102 h total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm good / well-maintained condition (!!) - Inspected condition - Machine video - ?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 - CNC-controlled backgauge adjustment (X-axes) Kodpjxabnyofx Ahzowt - CNC-controlled vertical adjustment of the stop fingers (R-axes) - CNC-controlled left-right adjustment of the stop fingers (Z-axes) - Freely movable two-hand control & foot switch - Tool crowning - AMADA type - Various tools - CE marking - Side guards (hinged doors) - Rear guards (hinged door) - 2x emergency stop buttons at the front - Operating instructions

Condition: good (used), sheet width 2540 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm 9.0 St. back stop - adjustable 100 mm/sek cutting angle 1° 20 table height 855 mm table depth 500 mm no. of strokes 33 - 55 Hub/min 0 max. 250 bar engine output 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 2960 x 1990 x 1700 mm From a maintenance workshop Good / well-maintained condition (!!) Equipment: - Powerful electro-hydraulic guillotine shear - AMADA NC control unit * Pivoting control panel, front left - NC electro-motorized material backgauge * Backlash-free ball screw - Manual cutting gap adjustment with 2 levers - 1x long side stop - 1x support arm Ksdpjxn Tx Hofx Ahzswt - Rigid welded machine body - Sighting device with three mirrors (cutting according to marking) - Front safety guard (finger protection) - 1 freely movable foot switch - Operating instructions (PDF) * Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: used, Clamping device for table band saw, wood band saw, firewood saw, automatic band saw, material positioning, saw band rollers, saw band roller Kjdpfogal Avsx Ahzowt -Saw band roll: made from metal saw Amada HA-400 W -Diameter: 595mm -Shaft: Ø 50 x 70 mm -Receptacle: M16 x 2 -Dimensions: Ø 595 x 193 mm -Quantity: 1 piece available -Weight: 51kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Kodpfsgag Ahjx Ahzswt -Spare part: hydraulic cylinder from Amada HA-400W metal saw -Piston rod: Ø 28 mm -Stroke: 585 mm -Admission piston rod: M30 x 1.5 -Dimensions: 835/70/H200 mm -Weight: 17.1 kg

Year of construction: 2004, condition: used, table length 1250 mm table width 1250 mm burner heads 1 Control Fanuc output 1000 Watt travel -z axis 100 mm travel x / y 1260/1260 mm traversing speed 30/30/42 mm/sec Kwedpfxshly Hlo Ahzot gas consuption 10 Liter/Std. total power requirement 22 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 10 m

Condition: used, Year of construction: 2006, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 200 mm Kodpfjtv Rlbjx Ahzswt max. opening beam/table 470 mm C-recess 350 mm max travel X-axes 700 mm Z1+Z2 axes controlled by cnc nein, manuell 4 finger mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 43000 h length 3100 mm width 1600 mm height 2550 mm weight 5750 kg total power requirement 9 kW dimensions of the machine ca. 3x2x2,5 m Control Amada OP2002 All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: used, Year of construction: 2007, pressure 170 t chamfer lenght 3000 mm distance between columns 2750 mm Stroke beam 200 mm max. opening beam/table 520 mm C-recess 350 mm traveldistance X1+X2 cnc programmable 700 mm R1 and R2 axis controlled by cnc 250 mm Z1+Z2 axes controlled by cnc 0-2500 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 36820 h length 3600 mm width 2200 mm Kjdsxyzy Nepfx Ahzjwt height 2850 mm weight 12000 kg total power requirement 16,5 kW dimensions of the machine ca. 4x2,5x3 m Control Amada AMNC All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: used, Year of construction: 2008, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 200 mm max. opening beam/table 470 mm C-recess 350 mm traveldistance X1+X2 cnc programmable 700 mm Z1+Z2 axes controlled by cnc 0-2000 mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 14600 h Dimensions of machine: length 3300 mm width 1600 mm Kedetv Rk Rjpfx Ahzewt height 2550 mm weight 5750 kg total power requirement 9 kW dimensions of the machine ca. 3,5x1,8x2,6 m Control AMNC NT All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: used, Year of construction: 2004, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 350 mm max. opening beam/table 620 mm C-recess 420 mm traveldistance X1+X2 cnc programmable 700 mm Z1+Z2 axes controlled by cnc 0-2000 mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec Kjdpfx Asxyzzaohzswt opening speed 100 mm/sec Number of working hours 24000 h length 3380 mm width 1800 mm height 2750 mm weight 6100 kg total power requirement 9 kW dimensions of the machine ca. 3x2x2,5 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.