Used Asa K11 for sale (568)

Condition: new, Year of construction: 2026, Working width: 520 mm Planing shaft: tersa Number of knives: 4 Dressing table length: 2720 mm Adjustment dressing table: Lever Hollow point adjustment: no Gap removal display: Scala Hollow pointed joint display: - Dressing stop angle adjustable: yes Fgodpfogr Udvsx Adcoc Motor power: 7 kW Machine length: 2800 mm Machine width: 1000mm Weight: 870 kg

Condition: as good as new (ex-display), Year of construction: 2018, Spindle tiltable: Yes -45 to 45° Height adjustment: Handwheel Pivot adjustment: Handwheel Stop adjustment: manual Height display: mech. counter display Swivel angle display: mech. counter display Fedpfx Ajgyzzmodcegc Milling stop display: mechanical counter display spindle diameter: 30 mm spindle speeds: 3000, 4500, 6000, 8000, 10000 rpm power input: 7 kW Motor brake: Yes, automatic Suction connection: 1 x 120mm, 2 x 80mm Machine length: 2500mm Machine width: 1250mm Weight: 510kg

Condition: used, Year of construction: 2020, Working width 1100mm Width of the belts 1115 mm Development of 1900mm bands Working height min max 4/170mm Steel inlet roller - rubber roller - steel outlet roller Finishing skate Probe a panel Main engine power 11kw-15hp Motor power drive 0,4kw-0,7cv Two drive speeds 4.5/9m/min Fsdpfx Ajx A D Arodcjgc Voltage 380 V

Condition: new, Year of construction: 2015, functionality: fully functional, controller manufacturer: abb, controller model: abb, Equipment: documentation/manual, New ABB gas analysis cabinets, completely new, AO2020 el3020 and more, 3 units available. For more information, see photos. Each cabinet comes with a pallet of loose parts. Price per cabinet. Fedpfx Adsyfhwtjcsgc

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. Fgodpfoyb Rpdjx Adcoc The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: used, Set of 2 robots. One for removing lids from forms and the other for taking bread out. Fgedpfx Adoyam Dzscec

Condition: ready for operation (used), Year of construction: 2011, Load capacity: 80kg, horizontal/vertical reach: 2100mm/3300mm, repeatability: +/-0.07mm, weight: approx. 540kg. Documentation available. An on-site inspection is possible. Fgsdpfxeyr Rxas Adcoc

Year of construction: 2025, condition: new, The PR EXC extraction arm is manufactured in accordance with the requirements of ATEX Directive 94/9/EC concerning equipment intended for use in potentially explosive atmospheres. Fodpfx Adoygurmjcogc The extraction arm meets the requirements of Equipment Group II for gases and dusts. The local extractor is therefore suitable for workplaces requiring the safe handling of explosive gases and dusts. The device is suitable for use in Zone 1 or 21; these are areas where an explosive atmosphere is likely to occur during normal operation. Application The design and features are unique, as highlighted: Exceptionally easy to handle, especially due to its stable positioning, the extraction arm features an optimally designed hood, maximum extraction efficiency, and maximum collection capacity. The ATEX environment PR arm is designed according to Fumex’s core principles: Support arms positioned externally Technical Data Length – 3000 mm Dimensions – Ø 160 mm Marked EX II 2 GD Load-bearing parts with electroconductive powder coating and plastic parts made from electroconductive polypropylene.

Condition: new, Year of construction: 2022, I sell the new widebelt sanding machine Casadei Libra 45 RCT 110 Year 2022. Configuration: Steel moulding cylinder with spiral knives Combi unit hard rubber cylinder + segmented pneumatic jumping pad. Working width 1100mm Elektronic working height adjustment with digital readout 3-160mm 1 Motor 2 Feeding speeds. Fgjderddh Iepfx Adcjc Programming of in/out jump of the pad. Sensitive adjustment of pad position. Sensitive adjustment of cylinders position. Pneumatic adjustment of pad and cylinders pressure position. Pressure rollers for short elements. Air-blow for cleaning the sanding band. Condition NEW ! The machine was not working before. Available immediately. Including full documentation and CE.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2023 Approximate dimensions: Length: 2,300 mm Width/Depth: 1,100 mm Weight: 980 kg Total table length: 2,300 mm Infeed table length: 1,200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1,200 mm Fence height: 190 mm Fence tilting range: 90° - 45° Thicknesser extraction port diameter: 120 mm Main motor: 7 kW Fedpextgz Eefx Adcsgc Space requirement length: 2,300 mm Space requirement width/depth: 1,610 mm Space requirement explanation: The dimensions include maximum travel paths or usable lengths. Machine body length: 1,235 mm Machine body width/depth: 850 mm Length: 1,000 mm Width: 3,500 mm Note on working area: Please add the specified dimensions to the space requirement to determine the recommended clear installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phases: 3-phase Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5,000 rpm Maximum planing width: 520 mm Feed speeds: 5/8/12/18 m/min Availability: short-term Location: Solingen

Condition: used, functionality: fully functional, actuation type: hydraulic, roller (top) diameter: 420 mm, sheet thickness (max.): 25 mm, total length: 3,100 mm, Hydraulic cylinder Brand: Casanova Bending length: 3,100 mm Fgjdpsydk D Hofx Adcec Maximum bending thickness: 25 mm Top roller diameter: 420 mm The side rollers are raised parallel, without inclination. New control and command panel, installed and modified in 2003. Equipped with hydraulic flag and hydraulic side table. Pit dimensions: - 200x6800 mm - 555 mm depth

Condition: used, functionality: fully functional, Year of construction: 1995, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 14 mm, Equipment: safety light barrier, Hydraulic Shear Brand: Casanova Model: VC-26 Fodpfx Adjwy Nhqecjgc Year: 1995 Power: 30KW New WEINTEK control installed in 2020. Cutting length: 3100mm Maximum cutting thickness (steel): 20mm Maximum cutting thickness (stainless): 14mm Throat: 500mm Cuts per minute: 8-18 Backgauge: 1,000mm Manual blade gap adjustment via side levers. Front safety laser.

Condition: not inspected (used), Year of construction: 2012, operating hours: 9,910 h, functionality: unexamined, working height: 45 mm, working length: 2,600 mm, TECHNICAL DETAILS Max. working length: 2,600 mm Max. working height: 45 mm MACHINE DETAILS Fsdpfx Adsyq Ez Hjcegc Total connected load: 6.5 kW Operating hours: 9,910 h The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6063

Condition: excellent (used), Year of construction: 1999, Year of manufacture: 1999 Reach: 2531 mm Control: CNC Fjdjyu H R Repfx Adcsgc Load capacity: 150 kg

Condition: used, functionality: unexamined, Year of construction: 2003, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, type plate available, Lasag Laser FLS 352 N / BAK 4 * used, MFD 2001 Fjdexxbrvepfx Adcsgc * av. laser power: 300 W * max. pulse power: 20 kW * max. pulse energy: 60 J * wavelength: 1064 nm * incl. documentation (German)

Condition: excellent (used), Specifications: * condition - used * manufacturer - CASADEI * main motor - 4 kW * spindle diameter - 45 mm * 4 speed adjustable on belts in the range of 4/6/8/10 thousand. triangle-star motor start * foot brake Fsdpfx Aeiu Ahbjdcsgc * original painting * overall dimensions - 110 x 90 x 120 cm (L x W x H). * weight - about 500 kg Additional information: * very good, factory technical and visual condition. * presented photos illustrate the actual condition of the object of sale * possibility of switching on and checking the device on site * the price given in the auction includes 23% VAT

Year of construction: 1994, condition: ready for operation (used), There are two Spindle Moulder Casadei available. (1) Casadei FM5L, max. milling height: 100mm, motor power: 6kW, length: 2540mm, width: 1195mm, height: 1500mm, weight: approx. 950kg, year of construction: 1992, with table extension. (2) Casadei FM5C, motor power: 6.8kW, year of construction: 1994, with trolley. On-site inspection is possible. Fgodpfxsurwy Nj Adcoc

Condition: good (used), We offer WASA underlay boards/plastic boards. Dimensions: 1450x1150x50. 1350 pieces. Fgjdpfx Adsrrxa Nscjc

Year of construction: 2017, condition: as good as new (ex-display), Technical data: - max. dimension (WxH )finished part 180x105mm - working width min. 23mm - working height min. 6mm - length min. single workpiece 300mm - Feed speed 6 - 12m / min. - Spindle speed 6.000 rpm. - Spindle diameter 35mm - Usable length horizontal spindle 190mm - Usable length vertical spindle 120mm - Adjustment feed table and infeed guide 10mm - Tool diameter horizontal spindle 100mm - Min./Max. Tool diameter vertical spindle 100/124mm - Profiling possibility vertical spindle 12mm - Aggregate adjustment range for planing heads +/- 1mm - Motor power horizontal spindle 7,5 kW - motor power vertical spindle 7,5kW - motor power feed 0,75 / 1,1 kW - Supply voltage 400V - phase (n) 3 Fodjii Rxgjpfx Adcogc - Mains frequency 50Hz - Length material feeding table 2300mm - Diameter feed rollers - diameter suction hoods 1x150mm, 2x120mm

Year of construction: 2005, condition: as good as new (ex-display), Iwasaki TR2 2005 web width 100-330mm maximum printing surface - 310 x 254mm printing repeat 50-260mm maximum mechanical speed 50m/min machine power 3p/26kw machine weight approx 12000kg unwinder 6 Wet UV offset printing units 1 uv flexo unit Fgodpfx Adsy Tlyiocec 1 rotary die cutting slitting rewinding BST Camera inspection monitoring Computer controlled CABER ink system with SIP3 System for remote technical diagnostic Chiller All inking shafts replaced with brand new

Condition: excellent (used), Casadei F250M Tilting Spindle Moulder Spindle height and angle adjustable electrically from -5° to +45° Fgsdpfx Ajyt Hpksdcoc 40 mm diameter spindle Long tables 240 cm with extension Adjustable fence with AIGNER guides 4-roller power feed 5 spindle speeds 7.5 kW motor Forward/reverse rotation Spindle lock Brake Very good condition, machine inspected and fully ready for work. Dimensions: width 263 cm, depth 140 cm, height 196 cm, weight 900 kg

Condition: new, Year of construction: 2022, Working width: 630 mm Planing height: 300 mm Planing shaft: Tersa Number of knives: 4 Height adjustment: electric display planing thickness: mech. counter Feed speed: 5 / 8 / 12 / 18 Feed roller: steel Pressure beam: jointed Extraction roller: Rubber table rollers: no Engine power: 9 kW suction connection: 150mm Machine length: 1200mm Machine width: 1200mm Fgodsl D Rxbjpfx Adcjc Weight: 810 kg

Condition: as good as new (ex-display), Year of construction: 2024, Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 200 mm Scorer: yes Fsdpfx Adskuzd Hjcjgc Height adjustment saw blade: motorized Pivot adjustment saw blade: motorized Width stop adjustment: manual Display saw blade angle: digital Display cutting height: digital Display width stop: scale Display cutting ruler: scale Saw blade diameter: 550mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7,5 kW Motor brake: yes / automatic Suction connection: 100mm and 120mm machine length: 3600mm Machine width: 2000mm Weight: 1000kg

Year of construction: 2021, condition: excellent (used), machine/vehicle number: 2108-2592, Holaras AS-10 knive topper for onions with 2 knives This 2 blade onion topper is specially designed for cutting of the tops of the onions or bulbs. By this knife topper the tails of the onions are not deducted, but they are cut by the rotory knives. Special vibrators with a targeted number of vibrations put the sieves with the onions on top in motion. Due to the high rotational speed and the special shape of the blades, a strong air is created. This air current sucks the tails through the sieves and cuts off just below the sieve. With extra knive, sieve and motors Fgsdpfxsx Hu Enj Adcsc - Selfmade housing, which makes the machine a closed topper - Space between the bars of the sieves: 30 and 20 mm - Capacity 5 - 10 ton / hour When using the Holaras topping machines, the haulm is not pulled off, but cut of by fast rotating blades. This avoids damage because the blades do not touch the onions. The number of directed vibrations transmitted by specially designed vibrator-motors on the vibration-sieves is such that the onions move in a floating motion over the vibrationnsieves. The haulm (tops) is drawn through the openings into the sieves by a heavy airstream, downward, and then cut by the blades. The vibrator-sieves are easy to change. The vibrator-sieves are available for almost all types and sizes of onions and shallots. Seed onions, picklers, medium and ware-onions, shallots, are topped without difficulty by the Holaras topper without being damaged. It is important to use a sieve which is suitable for each kind of onion.

Condition: ready for operation (used), functionality: fully functional, cutting length (max.): 3,550 mm, cutting width (max.): 530 mm, overall weight: 9,000 kg, stroke length: 100 mm, TECHNICAL DETAILS Usable cutting length (as double guillotine): 3,200 mm Usable cutting length (as single plate shear): 3,550 mm Press stroke: 100 mm Press width: 550 mm Min. cutting width: 18 mm Max. cutting width: 530 mm Scrap setting range: 0/50 mm Operating pressure: 6/7 bar MACHINE DETAILS Installed total power: 13.9 kW Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,700 x 1,800 mm Weight: 9,000 kg EQUIPMENT Robust steel construction Blade beam made of cast iron Self-lubricating prismatic guides Adjustable rear support Fedpfx Aoyf Eucsdcogc Press for holding the veneer package during cutting Photoelectric cells Electronic programming device Perimeter safety guards