Used Ga 11 Ff for sale (20,095)

Condition: used, Year of construction: 2001, pressure (max.): 10 bar, Screw Compressor Manufacturer: Atlas Copco Type: GA 11 FF Year of Manufacture: 2001 Technical Specifications Manufacturer: Atlas Copco Type: GA 11 FF (with integrated refrigeration dryer) Year of Manufacture: 2001 Floor-Mounted Design Control System: Elektronikon Max. Operating Pressure: 10 bar Motor Speed: 3000 rpm Rated Power: 11.0 kW Dimensions: L 1.2 x W 0.70 x H 1.40 m Weight: 475 kg All information is subject to change. Cslhswivlujccqlopu A live demonstration is available at any time in our showroom.

Condition: used, functionality: fully functional, An industrial air compressor is a machine used to increase the pressure and flow of compressed air to power various industrial tools, equipment and processes. Celhcjwnxziscqlepu

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: CAI709141, overall weight: 500 kg, total length: 2,000 mm, total width: 1,000 mm, total height: 2,400 mm, ATLAS COPCO GA11 VSD FF screw compressor including air receiver Cpolhox Tz Tfjccqleu - Operating voltage: 230 V - Frequency: 50 Hz - Compressor: 400 V - Frequency: 50 Hz - Connection: 3 kW - Max. air pressure: 12.75 bar Attention: The item must be collected definitively between 18 and 26 February 2026 on a date to be agreed upon. FCA D-78087 Mönchweiler – loaded onto truck

Condition: used, Year of construction: 2017, operating hours: 20,000 h, functionality: unexamined, machine/vehicle number: GA11VSD+FF, Compressor compressed air system Atlas Copco Consisting of: Compressor GA18 Plus, year of manufacture 2007 Compressor GA11VSD+FF, year of manufacture 2017 Control ES 6 The buyer must take care of the professional dismantling himself. Forklift is provided. Celhccqsvx Nmfoljpu

Condition: ready for operation (used), operating hours: 20,000 h, functionality: fully functional, 1.46–7.25 m³/min, recently measured. Celhccqjyg H Tceljpu

Condition: used, This listing is for the ATI Porta Sens 11 Gas leak detector The unit is in full working condition and is ready for immediate use Key Specifications (PortaSens II) Cjlhccqjxv Dh Ielspu Sensor Compatibility: Accepts H10 “Smart Sensor” modules for detecting over 30 different gases, including toxic, flammable gases, and oxygen. Range & Accuracy: Accuracy typically within ±5% of the measured value (dependent on sensor). Display: Backlit graphics LCD for clear visibility in varying lighting. Alarms: Three levels of gas concentration alarms, low flow alarm, and low battery alarm. Sampling Modes: Supports both instantaneous and timed sampling. Data Logging: Stores up to 12,000 data points with customizable intervals (1–60 minutes). Power Supply: D-cell alkaline battery (75 hours) and NiCad rechargeable backup (6 hours). Pump: Internal rotary vane pump (~400 cc/min flow rate). Operating Range: -25°C to 55°C; 0–95% RH (non-condensing) Size & Weight: 3.5″ W x 9″ H x 5.5″ D; ~7 lbs

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) With refrigerant dryer 37 kW motor Capacity 7.25 m3/min Pressure 13 bar Mileage 13200 hours Colhot Hdh Noccqljpu The compressor is fully functional.

Condition: excellent (used), Year of construction: 2017, operating hours: 29,000 h, inverter compressor with integrated dryer technical specifications Cpjlhcjxl Tpyscqlsu maximum pressure: 13 bar power: 55 kW / 75 hp capacity: 9960 litres/min current list price for new compressor: €94,655

Condition: excellent (used), Year of construction: 2005, operating hours: 23,500 h, functionality: fully functional, Inverter compressor with integrated dryer. Fully functional. Approximately 23,000 operating hours. Main features: Cjlhcoxvcdnscqlepu Max pressure: 13 bar Power: 75 kW – 100 HP Output per min: approx. 12,500 l

Year of construction: 2000, condition: ready for operation (used), Operating pressure: 7.75bar, air volume flow: 40.4l/s, power: 15kW, speed: 3000rpm, machine weight: approx. 450kg. On-site inspection is possible. Cpjlhccswfg Hheqlsu

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Cslhceu Rptyecqljpu Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: APÜI298304, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS Maximum pressure: 8.5 bar Flow rate: 31.4 l/s Motor power: 11 kW Motor speed: 2,940 rpm MACHINE DETAILS Dimensions: 1,250 mm x 680 mm x 1,430 mm Weight: 410 kg Cslhewvh H Dsccqlspu

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Cjlhcev Rmmmjcqlspu

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: Cpoljwlp Hdshccqleu On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: repair required (used), Year of construction: 2005, functionality: not functional, 📌 Atlas Copco GA 132-FF screw compressor (year of manufacture: 2005) 🔧 Condition: Damaged (unknown cause of failure) I offer for sale a screw compressor of the renowned brand Atlas Copco, model GA 132-FF, with a built-in dryer. Year of manufacture 2005. Cpslhccov Hfc Soqlou ⚙️ Specification: ✔ Power: 132 kW ✔ Capacity: about 25 m³/min ✔ Working pressure: up to 14 bar ❌ Technical condition: The compressor is damaged - the exact cause of the failure is unknown. It may require repair or be used for parts.

Condition: like new (used), Year of construction: 2016, operating hours: 3,890 h, functionality: fully functional, INVERTER COMPRESSOR WITH INTEGRATED DRYER, LIKE NEW, ONLY 3890 HOURS. NEW LIST PRICE: EUR 56,199. MAIN FEATURES: MAX PRESSURE 13 BAR, OUTPUT 5100 L/MIN, POWER 26KW-35HP. Cpjlhccexnx Dhsqlju

Condition: good (used), Year of construction: 2020, machine/vehicle number: ITJ400414, overall weight: 264 kg, volume flow: 96 m³/h, pressure (max.): 8.25 bar, Equipment: refrigerant dryer, type plate available, We offer: ATLAS COPCO GA11FF SN: ITJ400414 YEAR: 2020 CAPACITY: (kW) 11 OUTPUT: (m3min) 1.6 CIS: (bar) 8.25 INVERTER: no BUILT-IN DRYER: yes EXCHANGER: no Colhccsv Dr Dweqljpu COOLED: (AIR) air ON THE TANK: no DOCUMENTS: no NEW/USED: USED

Condition: excellent (used), Year of construction: 2018, operating hours: 29,358 h, functionality: fully functional, Screw compressor Atlas Copco GA110VSDFF. Year of manufacture 2018 with approximately 29,358 operating hours. 110 kW with 8.30 bar and 21.60 m3/min. Celhcjw Da Ntecqlepu

Condition: ready for operation (used), functionality: fully functional, 2900 werkuren!!! Diesel-oil (1) -- Naphte (2) -- Electr (3): electric voltage: 3 x 380V - 50Hz Cpolsxl Hxbohccqleu Low press. (1) High press (2) Screw (3): 12.75 bar screw compressor Volume flow rate: 18.3 m3/min Power imput: 90kW Volume (L): 1500 L

Condition: new, empty load weight: 3,600 kg, maximum load weight: 8,300 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 205/65 R 17,5, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Drawbar extendable to approx. 3,850 mm, locking positions at approx. 1,000 mm, 2,000 mm, 3,000 mm or 3,850 mm; loaded floor height approx. 800 mm; internal vehicle width approx. 2,530 mm; centrally, 4 stake pockets for 100 x 50 mm plug-in stakes; 8 stake pockets in the outer frame; 4 lashing rings, each rated at 5.3 t; outer frame with lashing eyes; 4 warning panels with lighting; rear plug-in rotating beacon; contour marking and side underrun protection; rear mudguards and spray suppression. -- Subject to printing errors, mistakes and changes; sample images. -- More data at: !, More Details: ! Celhcsyf Ukgecqlspu

Condition: new, empty load weight: 3,600 kg, maximum load weight: 8,300 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: other, tire size: 205/65 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Drawbar extendable up to approx. 3,850 mm, locking possible at approx. 1,000 mm, 2,000 mm, 3,000 mm or 3,850 mm, laden loading height approx. 830 mm, internal vehicle width approx. 2,530 mm, 4 centre post pockets for 100 x 50 plug-in posts, 8 post pockets in outer frame, 4 lashing rings, each rated at 5.3 t, outer frame with lashing eyes, 4 warning signs with lighting, removable rear beacon, contour markings and side underrun protection, mudguards and spray suppression at rear. Subject to printing errors, mistakes and changes; sample images. More details at: ! Cpolhsyc Enweccqleu

Condition: like new (used), Year of construction: 2021, operating hours: 23,369 h, functionality: fully functional, Atlas Copco GA160VSD+FF screw compressor. Integrated dryer and frequency converter. 160 kW with 8.3 bar and 35.6 m3/min. Heat recovery system installed. Cpolheyfl Iveccqlsu

Condition: used, mileage: 90,688 km, power: 140 kW (190.35 HP), first registration: 06/2021, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,500 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, total length: 8,550 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 6,100 mm, loading space width: 2,500 mm, loading space height: 2,380 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, onboard computer, power mirror, tail-lift, trailer coupling, = Additional options and accessories = - Adjustable seats - Air seats - Autoradio - Driver seat manual adjustment - Engine brake - Full-size spare wheel - Heater - Lane Departure Warning System - Mirror heater - Multifunction steering wheel - Power windows front - Spare wheel - Spare wheel holder - Steering wheel adjustment - Sunroof - Tachograph - Twin wheels = More information = Engine capacity: 4.580 cc Empty weight: 5.655 kg Carrying capacity: 1.835 kg Cpjlhccqjygc Ebjlou GVW: 7.490 kg Tail lift: 1000 kg Number of berths: 1 Technical inspection expiration date: 2026 Tail lift: D'Hollandia DHLMQ.10

Condition: good (used), IMA BENZ drilling unit 10 +11 spindles with additional milling cutter and horizontal drilling head 2 x 3 spindles for IMA 310 410 610 If you are looking for a different drilling gear from Homag or IMA, please contact us or have a look at the website in our store. IMA BENZ drilling unit is a versatile and powerful tool, especially for the IMA 310, 410 and 610 machines. It is a 10 + 11 spindle drilling unit with an additional milling cutter and a horizontal drilling head with 2 x 4 spindles. Here are some technical details: Unit no.: 4-08300 and 4-07753 Drawing no.: 000W00004824 and 000M11100819 Motor speed: 1max = 4800 min-¹ Cjlhcceudludsqlopu Spindle speed: 8100 min-¹ and 8400 min-¹ Drive power: 4 kW Gear ratio: i = 1:1.69 and 1:1.75 Milling spindle: For holding milling tools The unit is used but in a functional condition and offers high productivity thanks to the ability to drill several holes simultaneously, which significantly reduces machining time.

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected Cjlohabk Dohccqljpu -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg