Used Aspiration System for sale (66)

Condition: used, mileage: 21,000 km, power: 58 kW (78.86 HP), first registration: 11/1989, overall weight: 3,500 kg, fuel type: diesel, color: red, next inspection (TÜV): 02/2026, gearing type: mechanical, loading space width: 1,730 mm, loading space length: 3,250 mm, loading space height: 1,830 mm, Year of construction: 1989, total length: 5,350 mm, total width: 1,975 mm, total height: 2,700 mm, number of seats: 2, 1st hand – German volunteer fire brigade. Directly from the garage, deregistered as of 26.08.2025; up until then, always registered with the original title document and even the vehicle registration from 1989. Only 21,000 total kilometers driven. MOT valid until 02/2026. Isdpfew Tpfujx Ag Njtn Very sound Bremer T1 panel van, mid-length version with factory steel high roof. Body condition in detail: Only 2 rust spots (rear right wheel arch and left side panel). Nothing else—not even at the "typical Bremer rust spots," which are all "clean" on this vehicle and have never been reworked. Only the front right wheel arch has been repaired. Normal wear and tear present. Underside is in good shape. Overall, a really good vehicle for its 36 years. The vehicle was explicitly sold to us by the original municipal owner as "accident-free." As-new winter tires (DOT 2022). Tall 270-degree rear doors and fog lights, rear axle stabilizer, and reinforced shock absorbers. Otherwise, absolute base version. No seat belts. No power steering. No ABS. Pure 1980s—back when durable, reliable vehicles were still built. There is hardly anything here that can break. OM 601 4-cylinder naturally aspirated diesel engine with 79 hp. 5-speed manual gearbox. 127 km/h is the registered maximum speed. When opened, a large mechanical running board extends from the sliding door. The vehicle was used by the fire brigade as an equipment transporter (GW) and has several racking installations, which can easily be removed if not needed. Conversion carried out by: Hermann Schmitz KG, 5901 Wilnsdorf near Siegen. Registered as "Other vehicle, fire engine." Unladen weight 2,320 kg (including all fittings). Permissible gross weight – original from factory, unchanged since 1989 – exactly 3,500 kg. This means this 308 D-KA can be driven immediately with the current car driver’s license. The emergency lighting system has been removed and is no longer included. The vehicle runs very well; the transfer journey on the motorway was a real pleasure. This offer is only available to commercial buyers or public authorities. Sale subject to intermediate sale and errors. The purchase price is final, gross = net. Differential taxation according to §25a UStG as a government vehicle. Therefore, 19% VAT will not be added. VAT cannot be shown separately or deducted from the purchase price.

Year of construction: 2024, condition: like new (used), functionality: fully functional, machine/vehicle number: 40423, The MACSQuant Analyzer 16 is a benchtop, automated flow cytometer engineered for multi-parameter cell analysis, offering convenience, sensitivity, and flexibility for both research applications and advanced cell therapy workflows. As part of the MACSQuant product line, this model improves upon previous generations by delivering 16 optical parameters (i.e., multiple fluorescence detection channels) while maintaining a compact footprint and a high degree of automation. Typical applications include immunology, immunophenotyping, cell and gene therapy (CGT) analytics, quality control processes, and general cell biology research. Key Features & Capabilities Highlighted advantages and system features: Feature Description / Details Optics & Detection - Outfitted with three spatially separated lasers: 405 nm, 488 nm, and 640 nm. - Provides 16 detection/optical parameters (multiple fluorescence channels, plus scatter signals). - Signal detection covers FSC (forward scatter), SSC (side scatter), and multiple fluorescence channels (e.g., V1–V5, B1–B6, R1–R3), each equipped with optimized photomultiplier tubes (PMTs). Itodpexg Ndiefx Ag Non Fluidics / Sample Handling - Minimum sample uptake: as little as 1 µL (recommended ~25 µL for precise volumetric counting). - Adjustable sample flow rates: 25, 50, or 100 µL/min, or automated regulation to achieve target event rates (e.g., 500, 1,000, or 2,000 events/second). - Maximum event rate: up to approximately 15,000 events/second (ALT mode). - Compatible with various sample vessels, including 1.5, 2, and 5 mL tubes, tube racks, and 96-well plates. Transition between tubes and plates is user-friendly. - Utilizes an automated robotic needle arm for sample aspiration, thorough mixing, and automated washing of both the injection port and needle before and after runs. Automation & Workflow - Full automation for maintenance routines, PMT gain calibration, fluorescence compensation, sample acquisition, and analysis. - "Express Modes" (pre-set protocols) and templates support reproducible sample acquisition and data processing workflows. - Harmonization features for cross-instrument and multi-site data alignment, promoting data standardization for multi-center studies. - Regulatory and compliance support: offers 21 CFR Part 11-compatible features (audit trail, user management, electronic signatures, and reporting), making it ideal for clinical and translational research labs. Sensitivity & Performance - High fluorescence sensitivity: e.g., for standard dyes — FITC < 110 MESF, PE < 75 MESF, APC < 100 MESF - High precision:

Condition: ready for operation (used), Condition Used Stock Number 1331 This listing is for a Sysmex PU-17 Pneumatic Unit. The unit is in full working condition and is ready for immediate release. Itsdpfx Agjvyvkms Non The Sysmex PU-17 Pneumatic Unit vacuum pump is an essential component for haematology analysers, particularly in streamlining blood sample analysis. Features:Functionality: Vacuum Source: The PU-17 generates a reliable vacuum that is critical for the proper operation of haematology analysers. This vacuum allows the machine to aspirate blood samples efficiently, ensuring that the analyses—like cell counting and haemoglobin measurement—are accurate and consistent. Compatibility: Designed for Specific Models: It is specifically compatible with Sysmex haematology analysers, such as the Sysmex XN-1000 SA-01. This means that labs using these analysers can integrate the PU-17 easily, ensuring optimal performance without the need for extensive modifications. Importance in Haematology Testing: Efficiency in Testing: By providing a stable vacuum, the Sysmex PU-17 enhances the reliability of haematology tests, which are critical for diagnosing various conditions, including anaemia and infections.

Condition: new, Year of construction: 2023, Standby power 20 kVA (16 kW) Full load 17.5kVA (14kW) Voltage 230/400V Generator power 16 kW Generator continuous power 14 kW Number of phases 3 Itodpfxsi Nthqj Ag Nsn ECU adjustment Fuel tank capacity 60 l Liquid cooling Frequency 50Hz Rotation speed 1500 rpm. Engine type in-line, 4-cylinder, naturally aspirated Cylinder diameter and length 98 x 105 mm Engine capacity 3.2 liters Capacity oil approx. 3 l (between the min./max. value on the dipstick) Capacity coolant approx. 5 l diesel fuel Compression ratio 17.2:1 DATAKOM D300 control panel Insulation class (alternator) H Number of windings (alternator) 12 IP degree of protection (alternator) IP23 Shunt excitation type Voltage (alternator) +/- 1% Overall dimensions (length x width x height) 2000 x 900 x 1070 mm EURO III emission standard Weight 730 kg

Condition: used, TECHNICAL DETAILS - Disc : 2x - Connection : 50 Hz 3x400 V - Machine weight : 3200 [kg] - Number of hours under power : 99 287 [h] - Wheel diameter : 700 [mm] - Wheel height : 200 [mm] - Max. height of the workpiece : 100 [mm] Iedpow Ulnbsfx Ag Netn EQUIPMENT - Aspiration : 1 - Coolant tank : 1 - Hydraulic unit : 1 - Tooling : 1 - Retention plate : 1

Condition: ready for operation (used), Year of construction: 2010, 5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - Strokes: X-U 4000mm. Y 4000 mm. Ijdpfxok Uicgo Ag Notn Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - N. 2 working tables 1400x3000 mm - N. 3+3 rails per each working table - N. 3+3 CSR supports per each table - Head type CS 44 (n. 4 motors 7.5 kW each) - Rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - N. 2 inverters - Wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - Remote support - Communication PC/CN TCP/IP - Cabin + roof - CE rules - Year 2010 COMPLETELY RECONDITIONED

Year of construction: 2006, condition: as good as new (ex-display), machine/vehicle number: 4014, Mineralization system ASTORI - DIGI-6, KJELDAHL, model Digestor 67185 Description: The DIGI-6 Kjeldahl Digestion System allows the parallel digestion of up to 6 samples at the same time. Its strong and space-saving structure was studied to provide excellent heating efficiency and insulation. As a consequence, power consumption is reduced dramatically, meanwhile ensuring an optimized digestion procedure. The temperature is controlled by a digital thermal regulator: the selected value is kept with a surprising level of accuracy and precision; furthermore, the digital controller includes an over-temperature protection system. The provided rack allows quick handling of all digestion tubes, with its easy positioning and removal thanks to the practical lateral handles. The acid fumes are fully gathered by the glass caps and the acid-proof tubes, placed on the upper part of the equipment. The fumes are efficiently conveyed to the favourite fumes removing systems, such as a water jet pump or a scrubber: thus, the operator can choose to work outside the aspirating hood by easily connecting the DIGI-6 Kjeldahl Digestion System to an optional scrubber unit. The equipment can be used with up to 6 standard digestion tubes with 250 ml capacity, each. Upon request, a version for "Buchi" digestion tubes can be manufactured. Advantages and technical features : - 6-place heater - External structure in stainless steel - Digital temperature controller - Temperature setting from room values up to 450°C - Over-temperature protection Itjdpfx Asfimhxsg Nen - Designed for the maximum operator"s safety - High heating efficiency and excellent insulation - Traditional 250 ml digestion tubes can be used - Supplied with a fumes gathering system - Easily connectable to a scrubber unit - Rack for the quick and easy handling of tubes (the tubes should be ordered separately) - Power Supply: 220 Volts/50 Hz - Absorption: 1000W • For Romanian companies, there is the possibility of selling in instalments. Price Euro 1.990 + VAT, Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale /Ne rezervăm dreptul la greșeli, modificări și vânzare. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Abbott Cell-Dyn 3700 Hematology Analyser Iodpfxsh Dpyxe Ag Notn The Abbott CELL-DYN 3700 system is an automated multi-parameter hematology analyser designed for in vitro diagnostics in clinical laboratories. The CELL-DYN 3700 analyser , designed with its analyser as the central unit, aspirates and dilutes whole blood samples, transports and analyses the prepared dilutions and rinses liquid components in preparation for the next sample. The haematology analyser produces haematology measurements on EDTA-anticoagulated whole blood, including WBC, NEU, LYM, MONO, EOS, BASO, RBC and HGB. Item condition: used Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: ready for operation (used), machine/vehicle number: 18121322, Condition Used Stock Number 52286 This listing is for a BioTek 405TS Microplate Washer. The unit is in full working condition and is ready for immediate release. Supplied with: (2) 4 Litre waste bottles (2) 4 Litre buffer bottles Microplate Holder Itjdpfxsvi Avhs Ag Njn The BioTek 405TS Microplate Washer 405TSRSQ is a top-tier instrument designed to streamline the washing process for various assay types, particularly in cell-based assays, microsphere assays, and ELISA applications. Here’s a detailed overview of its key features and specifications: Key Features: Patented Verify Technology: This innovative feature automatically checks for any blockages in the manifold tubes before initiating a wash cycle, ensuring that each wash is effective and reliable, minimizing the risk of failed assays. Ultrasonic Advantage: This functionality automatically cleans any blocked manifold tubes, helping to prevent clogging and ensuring consistent performance across multiple wash cycles. High-Resolution Touch Screen User Interface: The intuitive interface allows for easy setup and control of washing processes for both 96- and 384-well microplates, enhancing usability and flexibility. Dual-Action Manifold: This feature enables independent control and positioning of the aspirate and dispense sections, allowing for precise liquid handling and optimized washing techniques. Optimized Cell Washing: Designed for gentle washing of loosely adherent monolayers, the washer operates at low flow rates with angled dispensing to protect delicate cell structures during the wash process. Biomagnetic Separation and Vacuum Filtration: These optional enhancements provide advanced washing capabilities, expanding the versatility of the instrument for various applications. Specifications: Wash Volume: Configurable from 25 to 3000 μL per well, accommodating a wide range of assay requirements. Microplate Types: Compatible with 96- and 384-well plates, including both low profile and standard height, as well as solid and filter bottom options. Fluid Pump Type: Utilizes a diaphragm pump, ensuring consistent fluid delivery and performance. Instrument Control: Managed through a local touch-screen computer software interface, simplifying operation and customization of wash protocols. Number of Reagents: Capable of handling 1 to 4 reagents, allowing for complex washing and assay procedures.

Condition: good (used), Year of construction: 2014, table dimensions : 2000 X 900 mm axes : 1800 X 860 X 750mm spindle speed : 8 000 tours/ min spindle taper : BT50 spindle power : 18,5 KW tools magazine : 40 pockets coolant through spindle 20 bar Iedpfxjtznlbo Ag Nstn prismatic slide guides weight : 21 t BLUM receiver systems with infrared transmission mist aspiration system chip conveyor, double screw + elevator isolation transformer Table extension to reach 0 with the spindle to machine plates (removable) Preparation for 4th axis. electronic handwheel

Condition: used, TECHNICAL DETAILS - distance between centers : 200 [mm] - centers height : 100 [mm] - strokes (X/Z) : 130 / 170 [mm] WHEELHEAD - grinding wheels dimensions : 400 x 63 x 127 [mm] - peripheral speed : 45 [m/sec] - power : 3 [kW] - positioned at : 30 [°] WORKPIECEHEAD - type of cone: MT4 - speeds : 600 - 3000 [rpm] - power : 0,5 [kW] - C axis indexing precision : +/- 0,5 [°] TAILSTOCK - type of cone : CM2 - quill stroke : 30 [mm] ELECTRICAL SUPPLY - voltage : 400 [V] - frequency : 50 [Hz] - installed power : 19 [kVA] DIMENSIONS - floor space : 1760 x 2180 [mm] - height : 2630 [mm] - weight : 4.000 [kg] HOURS - under power : 46.943 [h] - working hours : 21.529 [h] EQUIPMENT - CNC FANUC 16TB - soft options : Studer Release B, Pictogramming - interface : RS232C - electronic deported handwheel - direct measuring rules on axes X/Z - tailstock with fine concentricity adjustment - tailstock pinole hydraulic recoil - swiveling dressing wheel upon table : FISCHER AES-72x230/3 - dynamic wheel balancing device : DITTEL HBA 4000 - prepared for diameter sensor : MOVOMATIC ES400 - prepared for parts loading/unloading robot : FELSOMAT - automatic front door - prepared for cooling - electrostatic aspiration : ELOSTA BF2000 - pneumatic collets chuck - 1 wheel-holder - 1 grinding wheel Itodpfsuhbxmjx Ag Nsn - support arm for zero gravity wheel change - 1 balancing shaft

Condition: ready for operation (used), Technical characteristics Caractéristiques aspirationSweeping mouth Débit2800 m3/h Itsdpfx Aget U Uhis Non Power and Motors Motor: 3 CV Overall dimensions

Condition: used, mileage: 27,685 km, power: 102 kW (138.68 HP), gearing type: mechanical, overall weight: 7,490 kg, first registration: 01/1993, color: red, number of seats: 9, total length: 6,300 mm, total width: 2,500 mm, total height: 3,000 mm, Equipment: ABS, Internal number Robust LF8/6 on MB 814 with the proven 6-cylinder 6l naturally aspirated diesel engine and 140 HP +++++ Differential lock on rear axle +++++ Built-in tank with a capacity of 610l, rear pump 8/8 Bodywork and cab are rust-free Ready to drive and operate +++ Errors, changes, and prior sale reserved Ijdpfx Aewqarusg Njtn

Condition: used, Year of construction: 2003, Bottling Filling monoblock MBF 50.70.12.10 Year: 2003 Iedpfxewgad Ae Ag Netn Speed: 16,000 bph Direction: Counterclockwise Model: 50.70.12.10 – gravity filling Rinser 50 clamps Fixed nozzle Double treatment Electropneumatic valves System to aspire water's drops by vacuum pump Filler 70 valves Electropneumatic filling valves Adjustment levels by electric panel Corker 12 heads – Natural straight cork Capper 10 heads – Crown cap 26mm CIP washing Dust' aspire system Universal cochlea Touch screen Hours been used: 4,000 Safety protections.

Condition: ready for operation (used), machine/vehicle number: 1802221, Condition Used Stock Number 50347 This listing is for a BioTek 405TS Microplate Washer. The unit is in full working condition and is ready for immediate release. Supplied with: (2) 4 Litre waste bottles Microplate Holder Isdpfsvi Avnsx Ag Nstn The BioTek 405TS Microplate Washer 405TSRSQ is a top-tier instrument designed to streamline the washing process for various assay types, particularly in cell-based assays, microsphere assays, and ELISA applications. Here’s a detailed overview of its key features and specifications: Key Features: Patented Verify Technology: This innovative feature automatically checks for any blockages in the manifold tubes before initiating a wash cycle, ensuring that each wash is effective and reliable, minimizing the risk of failed assays. Ultrasonic Advantage: This functionality automatically cleans any blocked manifold tubes, helping to prevent clogging and ensuring consistent performance across multiple wash cycles. High-Resolution Touch Screen User Interface: The intuitive interface allows for easy setup and control of washing processes for both 96- and 384-well microplates, enhancing usability and flexibility. Dual-Action Manifold: This feature enables independent control and positioning of the aspirate and dispense sections, allowing for precise liquid handling and optimized washing techniques. Optimized Cell Washing: Designed for gentle washing of loosely adherent monolayers, the washer operates at low flow rates with angled dispensing to protect delicate cell structures during the wash process. Biomagnetic Separation and Vacuum Filtration: These optional enhancements provide advanced washing capabilities, expanding the versatility of the instrument for various applications. Specifications: Wash Volume: Configurable from 25 to 3000 μL per well, accommodating a wide range of assay requirements. Microplate Types: Compatible with 96- and 384-well plates, including both low profile and standard height, as well as solid and filter bottom options. Fluid Pump Type: Utilizes a diaphragm pump, ensuring consistent fluid delivery and performance. Instrument Control: Managed through a local touch-screen computer software interface, simplifying operation and customization of wash protocols. Number of Reagents: Capable of handling 1 to 4 reagents, allowing for complex washing and assay procedures.

Year of construction: 2000, condition: excellent (used), COMPLETE NAIL MAKING PLANT WAFIOS ( PACKAGE / BLOCK SALE ONLY !! ) Sale of the whole fleet of nail making machines (9 Wafios N90 machines) + rolling machines for ring nails (5 machines), complete with reels, conveyor belts, lifters, hoppers, pin aspirators, protective cages, various spare parts, manuals and certifications: WAFIOS N90 YEAR 2005 MATR 519 WAFIOS N90 YEAR 2008 MATR 614 WAFIOS N90 YEAR 2002 MATR 413 WAFIOS N90 YEAR 2004 MATR 454 WAFIOS N90 YEAR 1997 MATR 284 WAFIOS N90 YEAR 2000 MATR 372 REV. 2021 WAFIOS N90 YEAR 2003 MATR 443 WAFIOS N90 YEAR 1993 MATR 108 WAFIOS N90 YEAR 1991 MATR 018 REV 2022 ----- INGRAMATIC ROLLING MACHINE YEAR 1992 INGRAMATIC ROLLING MACHINE YEAR 1993 Itodeiqyhdepfx Ag Nsn SMART GR2 ROLLING MACHINE INGRAMATIC ROLLING MACHINE YEAR 1994 INGRAMATIC ROLLING MACHINE YEAR 1996

Condition: used, TECHNICAL DETAILS - Quantity of spindles : 6 - Bar clearance : 40 [mm] - Rotation speed : 7 000 [rpm] - Spindle power : 13 / 24 [kW] NUMERICAL AXES : 27 - Slides unit 1.1 : axes X and Z CNC-controlled - Slides unit 1.2 : axes X and Z CNC-controlled - Slides unit 2.1 : axes X and Z CNC-controlled - Slides unit 2.2 : axes X and Z CNC-controlled - Slides unit 3.1 : axes X and Z CNC-controlled - Slides unit 3.2 : axis Z CNC-controlled - Slides unit 4.1 : axes X and Z CNC-controlled - Slides unit 4.2 : axis Z CNC-controlled - Slides unit 5.1 : axes X and Z CNC-controlled - Slides unit 5.2 : axis Z CNC-controlled - Slides unit 6.1 : axis Z CNC-controlled + SCARA axis - Slides unit 6.2 : axes X and Z CNC-controlled - Slides unit 6.3 : axis X CNC-controlled ELECTRICAL INPUT - Voltage : 400 [V] - Frequency : 50 [Hz] - Installed power : 65 [kW] DIMENSIONS OF THE MACHINE - Floor space : 3329 x 2032 [mm] - Height : 2654 [mm] - Weight: 7100 [kg] HOURS - Hours under power : 45965 - Production hours : 19065 EQUIPMENT - CNC Siemens 840D (PL) double NCU - 2 control panels CN - 6 collet receivers TOPLUS with built-in stop Itodsuhantspfx Ag Non - 1 counter-spindle in position 6.1 - Clamping device in counter-spindle : chuck Röhm KFD-HS 110/3 - Coolant through counter-spindle center - Cn options counter-spindle/ polygonal milling - Rear machining device on slide 6.2 : 3x fix - Preparation 2 additional controls with electronic shaft in position 1.2.3 - Preparation 2 additional controls with electronic shaft in position 4.5.6 - STAUBLI robot type TX60 (6 axes) - Robot collet double clamping external type PZN50 - Swiveling plate (4 positions) - Coolant tank KNOLL with hinged chip conveyor, 2 HP pumps 40 [bars] - Oil mist aspiration device Büschel - Cooling unit RIEDEL - Preparation ARTIS

Year of construction: 2013, condition: good (used), functionality: fully functional, For sale: Westrup SD-1750-1102 Grain and Seed Cleaner We offer for sale a Westrup SD-1750-1102 modular pre-cleaner, which is excellently suited for the primary cleaning of all types of grains and seeds. ✅ Capacity: approx. 50–150 t/h (depending on the product and settings) ✅ Construction: modular system – pre-aspiration, sieve section, post-aspiration ✅ Main function: removal of light impurities, dust, and larger foreign materials Itodew Rci Iopfx Ag Nen ✅ Condition: in good technical condition, regularly maintained ✅ Application: ideal choice for grain and seed processing plants, mills, and feed mixers The machine is reliable, high-performance, and represents long-term, industrial quality synonymous with the Westrup name. Should you have any questions, please contact us! Transport assistance available!

Condition: used, mileage: 57,537 km, power: 195 kW (265.13 HP), first registration: 11/1991, overall weight: 17,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,450 mm, loading space length: 5,100 mm, loading space height: 1,650 mm, Year of construction: 1991, total width: 2,500 mm, total height: 3,280 mm, Equipment: ABS, Decent LF24 on MB SK 1726 in 4x2 with water tank 2800l + 200l foam Rear pump 24/8, 2x quick attack, roof projector, pneumatic light mast in the driver's cab AHK ring eyelet 24 t, towing weight 40t Cabin and body are free of corrosion Itsdpfx Agsvrwmaj Nen Wheelbase: 4600 mm Cabin dimensions behind driver's seat: 1650 x 2450 x 1650 mm (LxWxH) Body dimensions: 4850 x 2450 x 1650 mm (LxWxH) The 8-cylinder naturally aspirated diesel engine runs well and the 8-speed split transmission shifts well The spring brake cylinders on the rear axle and the starter batteries are new The vehicle is ready for use immediately +++ Errors, changes and prior sale reserved

Condition: ready for operation (used), Year of construction: 1995, Fanuc 0T Chuck diam. 210 12x turret Set of toolholders Tailstock with quill in cycle chip conveyor Presetting reset tools Aspirator condensation Turning diameter mm. 270 Turning length mm. 500 Bar passage mm. 51 Spindle motor power kW 11/15 Rapid X axis m / min 12 Fast Z axis m / min 16 4000 rpm Itjdpfx Aow Ap Uiog Nen

Condition: used, TECHNICAL DETAILS - Axes number : 6 - Centers height : 175 [mm] - Distance between centers : 650[mm] LINEAR AXES - Grinding length : 800 mm - Strokes X x Z: 310 X 850 [mm] GRINDING WHEEL HOLDERS HEADSTOCK - Taper type : - Continuous orientation ( B axe) : +/- 9 [°] - C Axis indexing precision ( High speed machining): 0.001 [°] - External grinding wheel dimensions : 500 x 80 x 20 [mm] - Grinding wheel holder headstock power : 12.5.5 [kW] - Rotation speed : 1400-3200 [Rpm] PART HOLDER HEADSTOCK - Taper type : ISO50 - Axis C indexing precision : 0.001 [°] - Power : 4[kW] - Rotation speed : 1-1000 [Rpm] SYNCHRONIZED COUNTER SPINDLE - Taper type : CM4 - Quill stroke (w axe) : 90 [mm] - Quill diameter : 50 [mm] - Power :1.6[kW] - Max. part weight between centers :50 [Kg] ELECTRICAL SUPPLY - Supply tension : 400 [V] 50[Hz] MACHINE HOURS - Number of working hours : 36000 EQUIPMENT - CNC FANUC 31i-A control - Sofwares * StuderWIN * Pictogramming * StuderThread only cycles * StuderTechnilogy Isdsu Haf Eepfx Ag Njtn - Remote control with electronic handle - Measuring rules on axes X and Z - Automatic length probe arm MOVOMATIC C25 - In-process external diameter probe arm MOVOMATIC DM205 - Coolant tank 375 liters - Paper filter - Oil mist aspiration - Grinding wheel loading arm - Dressing wheel diamond device ( Dia 100mm) - SENSITRON - Automotic dynamic balancing DittelM6000 - Grinding wheel holder flanges - Interface for AROBOTECH steady - Interface B3 PROFIBUS for automatic loading

Condition: used, mileage: 48,671 km, power: 174 kW (236.57 HP), first registration: 10/1992, overall weight: 12,500 kg, fuel type: diesel, color: blue, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,400 mm, loading space length: 3,800 mm, loading space height: 1,600 mm, total width: 2,500 mm, total height: 3,100 mm, Equipment: parking heater, A proper Iveco Magirus with 4x4 all-wheel drive and hydraulic Rotzler winch. Air-cooled V8 naturally aspirated diesel engine – extremely robust and powerful. 2x rear and center differential locks, rear extension for the winch, 5t towing capacity, 10t via rear extension with pulley. Tow bar with 12.0t ring eyelet and continuous braking system. 7 seats registered, various new parts, 10 Rx 22.5 tires. Freshly serviced with fuel filter replacement, air dryer cartridge replaced, starter batteries replaced, wheel brakes and all fluids lubricated and checked. Hydraulic clutch fluid and windshield wiper blades also replaced. We will deliver the Iveco with a fresh MOT/AU and H-certificate upon request. = +500€ The GVW is 12.5t. The curb weight is approximately 8.0 t, so the 120-23 cannot be reduced to 7.5 t. The V8 diesel engine and 5-speed transmission run smoothly, the car is easy to drive. Top speed according to the documents = 93 km/h Iedpfewgg D Nox Ag Notn Bag dimensions: 3870 x 2490 x 1600 mm (LxWxH) +++ Errors, changes, and prior sale are reserved.

Condition: used, TECHNICAL DETAILS WEIGHT & DIMENSIONS - Machine floor space : 1500 x 1000 [mm] Iodpew Ihrpsfx Ag Nstn - Machine height : 2500 [mm] - Machine weight : 580 [kg] - Number of hours under power : 26652 [h] EQUIPMENT - Aspiration - Coolant tank

Condition: used, mileage: 63,521 km, power: 174 kW (236.57 HP), first registration: 02/1992, overall weight: 12,500 kg, color: blue, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,400 mm, loading space length: 3,800 mm, loading space height: 1,600 mm, total width: 2,500 mm, total height: 3,100 mm, Equipment: parking heater, A proper Iveco Magirus with 4x4 all-wheel drive and hydraulic Rotzler winch. Air-cooled V8 naturally aspirated diesel engine – extremely robust and powerful. 2x rear and center differential locks, rear extension for the winch, 5t pulling capacity, 10t via rear extension with pulley. Tow bar with 12.0t ring eyelet and continuous braking system. 7 seats registered, various new parts, 10x22.5 tires. Freshly serviced with fuel filter replacement, air dryer cartridge replaced, starter batteries replaced, wheel brakes and all fluids lubricated and checked. Hydraulic clutch fluid and windshield wiper blades also replaced. The front inner fenders were professionally welded by us, and the outer chassis parts and rims were repainted. The Iveco will be delivered by us with a fresh MOT/AU and, upon request, with a new MOT/AU. H-approval submitted, = +500€ The GVW is 12.5t, the curb weight is approximately 8.0t – the 120-23 cannot therefore be reduced to 7.5t. The V8 diesel engine and the 5-speed transmission run well, the car can be driven without any problems. Isdpfx Agowgg D As Nstn Top speed according to the documents = 93 km/h Body dimensions: 3870 x 2490 x 1600 mm (LxWxH) +++ Errors, changes, and prior sale are reserved.

Condition: used, mileage: 25,927 km, power: 168 kW (228.42 HP), first registration: 04/1989, overall weight: 12,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, total width: 2,500 mm, total height: 3,100 mm, Equipment: ABS, Iveco 120-23 AW V8 diesel as a 16/25 TLF with 1200L water tank +++ only 25,927 km originally V8 naturally aspirated diesel with 12.7L displacement 4x4 all-wheel drive with low-range gear Iedpfxowkl Ets Ag Njtn 6-speed manual transmission 2x differential locks (center and rear) ABS 9 seats Aeolus 10Rx22.5 tires from 2017 Magirus body Magirus 16/8 rear pump Well-maintained and ready for immediate use +++ Errors, changes, and prior sale reserved