Used Atlas 1404 for sale (438)

Condition: excellent (used), Year of construction: 2012, operating hours: 36,734 h, Atlas Copco GA55FF screw compressor Integrated dryer 55 kW Ljdpfozphrwsx Afwohk 9.80 bar 8.87 m3/min Year of manufacture: 2012 Operating hours: 36,734

Condition: used, Year of construction: 2019, operating hours: 12,100 h, functionality: fully functional, machine/vehicle number: 010460, We are offering a high-performance industrial compressor from Atlas Copco for sale. The unit is used, has been regularly maintained by qualified personnel, and is immediately ready for operation. Technical specifications: Type: GA37 VSD+ FF (VSD+ technology for maximum energy efficiency) Operating hours: 12,100 hours Condition: Used, very well maintained, and immediately ready for operation. Lhsdpfezdqz Dox Afwek The compressor can be inspected and tested on-site in Kiel after prior arrangement.

Condition: ready for operation (used), Year of construction: 2013, A screw compressor Atlas Copco with integrated refrigerant dryer is offered. Power: 11kW, motor speed: 7700rpm, operating pressure: 12.75bar, capacity: 32l/s, variable speed controlled, operating hours: 9035h, weight: 271kg. An on-site inspection is possible. Lhodpfxszq Ec Ne Afwek

Condition: excellent (used), Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer, with their advanced digital control systems, represent significant advancements in the application of digital and optical technologies in user-friendly laboratory weathering devices. The 3000 series has been approved by many OEMs in the textile, paint, and coatings industries, as well as in the plastics industry, as an exclusive platform for precise, reproducible, and repeatable results for predicting service life. Features: Climate type Test type: Sunlight simulation Light source: Xenon arc lamp Applications: Additives and dyes Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Lsdpfszg Tmhjx Afwohk Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000’s humidification system uses a compressed air ultrasonic spray nozzle. Before entering the unit, the compressed air must pass through a water/oil separator. The small air regulator in the CI3000 contains a second water-oil filter and a 5-micron particulate filter. Ensure that a separate oil-water separator is installed and do not rely on the filter in the air regulator, as it is only designed as an additional device. Compressed air specifications Pressure: 80-100 PSI (552-689 kPa) Flow rate: 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the CI3000 37.5” Width x 29” Depth x 72” Height (95 cm Width x 73 cm Depth x 183 cm Height) Required footprint: 41.5” Width x 80” Depth (105 cm Width x 203 cm Depth) Total weight: 404 kg Voltage: 380-220 V 38 A 50 Hz ~3/N/PE 8 kW 404 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2014, S016896 PROD. ATLAS COPCO TYPE GA75VSDFF Lhjdpjzi Dbhsfx Afwsk S/N API668061 YEAR 2014 POWER (kW) 75 CAPACITY (m3/min) 15.09 DISCHARGE PRESSURE (bar) 12.75 HOURS (SERVICE/TOTAL) FREQUENCY CONVERTER yes BUILT-IN DRYER yes, R410a 1.1kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no NEW/USED USED

Condition: excellent (used), Atlas Type: CI3000+ Ci3000+ Weather-Ometer/Fade-Ometer Model: CI3000W Year of manufacture: 06/2022 Operating time: Device 816.5 hours Lamp operating time: Device 647.4 hours Total lamp operating time: 88.9 hours Atlas CI3000+ Xenon Weather-Ometer with calibration case The Ci3000+ Weather-Ometer and Fade-Ometer, with its advanced digital control systems, Lodpfozgr Nhjx Afwshk represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering devices. The 3000 series has been approved by many OEMs in the textile, paint, and coating industries, as well as the plastics industry, as an exclusive platform for precise, reproducible, and repeatable results for predicting service life. The 3000 series has been certified according to CE, UL, CSA, ISO, and EN standards. The main features of this device are: a rotating sample rack to maximize the homogeneity of all samples; customizable nozzles for uniform front and back spraying of samples; ASTM black panel thermometer or ISO/DIN black standard thermometer for regulating and monitoring the temperature at the sample level to ensure the repeatability of the tests. 4500 W water-cooled xenon lamp Total exposure area 2188 cm2 (339 in2) 12-inch TFT full-color touchscreen control panel - displays all test parameters Direct setting and control of black panel (BPT, non-insulated) or black standard (BST, insulated) temperature Direct setting and control of relative humidity Direct setting and control of the air temperature of the sample chamber Display of diagnostic messages 14 factory-preprogrammed test methods (Weather-Ometer); 6 factory-preprogrammed test methods (Fade-Ometer) Properties: Type: Climate Test type: Sunlight simulation Light source: Xenon arc lamp Applications: Additives and dyes Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Voltage: 340-415V 43A 50/60Hz 〜3/N/PE 8kW 410 kg Condition: used Scope of supply: (See image) (Subject to change and errors in the technical data, information provided!) We will be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2000, We offer Atlas Copco compressors: Type GA 55 Pressure: 10 bar Lsdpfx Afjzvx Trewshk Motor power: 55 kW Year of manufacture: 2000 Compressor with documentation

Condition: excellent (used), Atlas Ci3000+ Xenon Weather-Ometer Manufacturer: Atlas Material Testing Technology LLC Type: Ci3000+ Model: Ci3000+ Weather-Ometer Machine Type: Xenon Weather-Ometer / Weathering Test Device For sale is a used Atlas Ci3000+ Xenon Weather-Ometer. The device is suitable for artificial weathering, light aging, material testing, quality control, as well as aging tests of plastics, paints, coatings, textiles, and materials. Technical Data Light Source: Xenon Arc Lamp Lamp Rated Power: 4,500 W Xenon Lamp Operating Range: 1,700 - 4,500 W Device Model as Displayed: Ci3000+ W Sample Sensor 1: Black Standard Sample Sensor 2: Black Panel Light Sensor 1: CI 300 - 400 nm Light Sensor 2: CI 420 nm Power Connection: 220 / 380 V Frequency: 50 Hz Connection Type: 3/N/PE Rated Current: 50 A Power Consumption: 9.5 kW Control Voltage: 24 VDC Compressed Air Supply Required Operating Pressure: 80 - 100 PSI / 552 - 689 kPa Compressed Air Consumption: approx. 4 CFM / 0.11 m³/min Lhedpfszf D Rnex Afwjk Dimensions approx.: 950 x 730 x 1,830 mm (W x D x H) Required Footprint approx.: 1,050 x 2,030 mm (W x D) Weight approx.: 404 kg Minimum Distance Exhaust Hood: approx. 102 - 152 mm Operating Data Equipment Touchscreen Control Panel Xenon Burner Test Chamber with Sample Basket Black Standard Sensor Black Panel Sensor CI 300 - 400 nm Light Sensor CI 420 nm Light Sensor Water-Cooled Lamp System Exhaust Connection Interface Connections Integrated Humidification System Accessories / Documents Atlas Weathering Testing Guidebook Atlas Weather-Ometer Auxiliary Filter Lantern Kit Instructions Existing Documentation as Shown in Pictures Existing Accessories as Shown in Pictures Areas of Application Artificial Weathering Light Aging Test UV and Xenon Testing Material Testing Plastic Testing Paint and Coating Testing Textile Testing Automotive Industry Quality Assurance Research and Development Scope of Supply Atlas Ci3000+ Xenon Weather-Ometer Existing Accessories as Shown in Pictures Existing Documentation as Shown in Pictures Condition Used Good Optical Condition Optical Condition as Shown in Pictures Inspection possible by appointment. Scope of supply as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: API607459, overall weight: 1,580 kg, power: 55 kW (74.78 HP), volume flow: 637.2 m³/h, operating pressure: 7 bar, pressure (max.): 7.3 bar, type of cooling: air, Equipment: refrigerant dryer, Atlas Copco GA55+ FF screw compressor – 55 kW – manufactured in 2009 For sale: a well-maintained Atlas Copco GA55+ FF screw compressor with an integrated air dryer. The compressor has already been serviced and is ready for immediate use. Specifications: Type: Atlas Copco GA55+ FF Year of manufacture: 2009 Motor power: 55 kW / 75 hp Capacity: 10.62 m³/min Working pressure: 7.3 bar Motor speed: 2,978 rpm Weight: approx. 1,580 kg Operating hours: 17473/4022 Equipped with an integrated air dryer Serviced and ready for use Lhjdezku Ubepfx Afwek This compressor is suitable for industrial applications that require a reliable compressed air supply. Optionally available with a new or used compressed air tank.

Condition: excellent (used), Year of construction: 2013, operating hours: 72,688 h, functionality: fully functional, Atlas Copco GA45VSDFF screw compressor Inverter and dryer integrated. Ljdpoznlx Ssfx Afwshk 45 kW 12.75 bar 8.67 m3/min Year of manufacture: 2013 Operating hours: 72,688 h

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P3500i power generator The Atlas Copco P3500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 3500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood, CE compliant noise level, quiet Power sockets Electric key start (12V) Inverter technology, stable voltage and frequency Instrumentation, voltmeter, hour meter Circuit breaker Wheels Engine alarm: low oil level, overload Intelligent speed control for fuel efficiency Connections for parallel operation (parallel operation kit with cables optionally available) Lsdpfol R Hz Sjx Afwehk Voltage 230V / 50Hz Peak power 3.3 Rated power 3.0 Tank capacity (l) 10.0 Starter type electric / cable Weight 45.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 240/120V Twist Lock

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P2500i power generator The Atlas Copco P2500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 2500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood CE compliant noise level, quiet Power sockets Inverter technology, stable voltage and frequency Engine alarm: low oil level, overload Speed control for fuel efficiency Connections and cables for parallel operation Voltage 230V / 50Hz Peak power 2.5 Rated power 2.3 Tank capacity (l) 4.0 Starter type pull starter Weight 27.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Lhedpfx Asl R Hy Ajfwjk Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 120V 20A | 1x Nema 120V Twist Lock

Condition: excellent (used), Year of construction: 2013, operating hours: 58,270 h, functionality: fully functional, Oil-free screw compressor, Atlas Copco ZR90VSD Inverter integrated Lhedpfezmwc Hox Afwjk 90 kW 9 bar 15.50 m3/min Year of manufacture: 2013 Operating hours: 58,270

Condition: used, Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab Lhsdpfx Afjb A Huiewsk -Bucket width: 600 mm -Shovel length closed: 1400 mm -Total height: 2,200 mm

Condition: good (used), functionality: fully functional, fuel type: diesel, overall weight: 5,300 kg, Year of construction: 2014, operating hours: 7,440 h, Equipment: additional headlights, all wheel drive, cabin, standard shovel, Atlas 65 wheel loader, year 2014 with 7,440 operating hours, quick coupler and bucket, in clean condition and immediately ready for use. Transport and delivery possible. Inspection by appointment, including on weekends. Ljdoy N Ei Nopfx Afwjhk

Condition: used, Year of construction: 2023, operating hours: 2,044 h, We are offering this used Atlas Copco XATS 138 piston compressor, manufactured in 2023, for sale. Manufacturer: Atlas Copco Lsdpozvmnqsfx Afwohk Model: XATS 138 Emission stage: Stage V Operating hours: 2044 h Operating pressure: 0.0 bar Speed: min⁻¹ If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Here we offer you a weathering test device. Heraeus Atlas Xenotest BETA – a universal weathering instrument for testing the lightfastness and weather resistance of materials under normal, high-temperature, and high-performance conditions. XENOSENSIV drive Control of lamp power in W/m² XENOCHROME 320 35-100 W/m² Sample chamber temperature up to 80°C, regulated Measurement sensor on sample level XENOSENSIV E(300-400 nm) Humidification / irrigation Water supply with integrated water tank Sample chamber temperature: Ambient - 80 °C Black standard temperature: Surface - 130 °C Relative humidity: 10 % - 95 % Electronic version: 3/N/PE AC 400V ± 10 % 50-60 Hz Power connection: 32A Power consumption: approx. 12 kVA Rated power of the xenon lamp: 2200 VA Power of the xenon lamp: 2800 VA Rated current: 16A Lamp current max.: 20A Dimensions: Width 900 mm x Depth 1200 mm x Height 1800 mm Maximum sample area: 4000 cm² Weight: approx. 400 kg Type: Heraeus Atlas Xenotest BETA LM Condition: used Scope of delivery: (See picture) Ljdpfxezdtkuj Afwohk (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (at tel. number, he will be happy to assist you. JAB Hydraulic Hammer / Hammer / MS03 / in stock & immediately available Price: €3,490.00 net / €4,153.10 gross - Weight (kg): 336 - Length with chisel (mm): 1,500 - Chisel diameter (mm): 70 Equipment: - incl. MS03 adapter plate Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. In our warehouse, we have a very large selection of various attachments that are immediately available! Ledpfxsznrr Es Afwjhk Mr. Herden (tel. number) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telescopic loader sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: JW10GC = Further Information = Intended use: Construction Unladen weight: 336 kg Please contact Marius Herden for further information.

Condition: used, mileage: 1,001 km, first registration: 01/1994, color: orange, driver cabin: other, gearing type: other, Year of construction: 1994, Vehicle location: Bovenden. Lsdpei Rqmvefx Afwjhk Superstructure: Grabber with a capacity of approximately 250 liters. Width 500mm, depth 450mm, with rotary servo and teeth. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors!

Condition: excellent (used), Technical condition: very good Visual appearance: very good Please contact Ferdinand Pater for more information Lsdpfx Ajt Dltbofwshk

Condition: excellent (used), Year of construction: 2012, operating hours: 19,221 h, functionality: fully functional, Oil-free screw compressor ZT250FF Dryer integrated. 250 kW Lsdpfx Aozmdrbsfwjhk 10 bar 42.31 m3/min Year of manufacture: 2012 Operating hours: 19,221

Condition: used, Full container of used electric screw compressors for export. Container loading included in the price. Lsdpfow Imvyex Afwohk

Condition: excellent (used), Year of construction: 1997, operating hours: 12,873 h, functionality: fully functional, overall weight: 4,800 kg, fuel type: diesel, nominal power (apparent): 300 kVA, motor manufacturer: DETROIT DIESEL, type of cooling: water, ATLAS COPCO QAS 338 GD, 300 kVA, year 1997, 12,873 operating hours, DETROIT DIESEL S60 engine, water-cooled, weight 4800 kg. Ledpfsztpm Dsx Afwjhk

Condition: excellent (used), Year of construction: 1998, PROD. ATLASCOPCO TYPE XAMS445 S/N YA3-047166-00291071 YEAR 1998 POWER (kW) 206 CAPACITY (m3/min) 26.1 Lhjdpoztxxcofx Afwsk PRESSURE (bar) 8.6 HOURS (SERVICE/TOTAL) VARIABLE FREQUENCY DRIVE no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no NEW/USED USED

Condition: new, Compressor screw Manufacturer: Atlas Copco Suitable for the following models: GA90, GA110, GA132, GA160, GA180VSD, GA200, GA250 Lightweight Price per piece Lsdpevi Hbhefx Afwohk