Used Atlas Copco Xas 60 for sale (395)

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Gsdpfx Agexmkc Ts Nsuh

Condition: excellent (used), Year of construction: 2012, operating hours: 21,775 h, functionality: fully functional, motor manufacturer: Siemens, power: 500 kW (679.81 HP), volume flow: 68.33 m³/h, pressure (max.): 10.4 bar, type of cooling: water, 2012 Atlas Copco ZR500VSD, this machine is very low hours only 21,775 from new, and most hours done at low percentage RPM. The machine is in perfect working order and has been tested in our company and a video is available on request. Brought to the UK from Germany by a major UK company but never re-installed hence the very low running hours Gjdpew Sdadefx Ag Njuh Stored in dry clean storage and turned over on regular basis to ensure in good stored condition

Condition: like new (used), Year of construction: 2019, operating hours: 1,998 h, functionality: fully functional, As-new screw compressor Atlas Copco GA75VSD+FF. 75 kW with 13 bar and 13.50 m3/min. Year of manufacture 2019 with only 1998 hours. Guedpfx Aexlhgyjg Noh

Condition: good (used), Year of construction: 2009, operating hours: 63,000 h, functionality: fully functional, machine/vehicle number: API 656 564, overall weight: 1,213 kg, total length: 2,000 mm, total width: 1,300 mm, total height: 1,968 mm, power: 90 kW (122.37 HP), fuel type: electric, pressure (min.): 3 bar, pressure (max.): 13 bar, noise level: 74 dB, type of cooling: air, Equipment: documentation/manual, type plate available, The system was used to operate dry ice blasting equipment. A 5,000-liter tank was connected upstream and is included in the offer. After our relocation, the system was no longer put into operation. Gsdexd Umqjpfx Ag Nsuh The system additionally features a water heat exchanger, allowing the waste heat to be used for heating.

Condition: good (used), Year of construction: 2017, Atlas Copco AQ37VSD compressor Gujdpfxjw Dykqe Ag Noh 2017, 13Bar, 37Kw, with Atlas Copco BD100 air dryer and Lohenner 1000L air receiver tank, two lots available

Condition: used, Year of construction: 2001, operating hours: 70,000 h, overall weight: 5,000 kg, power: 250 kW (339.91 HP), pressure (max.): 10 bar, type of cooling: water, Well-functioning oil-free compressor (also suitable for Spareparts Airend) Gsdpfoxbdrdjx Ag Nouh

Condition: ready for operation (used), Year of construction: 2007, 37KW 12.5 bars Gusdpevr S H Ujfx Ag Noh

Condition: excellent (used), functionality: fully functional, power: 48.6 kW (66.08 HP), overall weight: 1,400 kg, Year of construction: 2017, operating hours: 1,896 h, ATLAS COPCO COMPRESSOR XATS138 7.00m3 2017 Mobile compressor ATLAS COPCO XATS 138 with aftercooler and WSD80 (water separator) Complete service performed – all filters and fluids replaced. Also equipped with a brand new battery. Gedpfexanyiox Ag Neuh Technical specifications: Capacity: 5.00–7.00 m3/min; Working pressure: 7–10.3 bar; Year of manufacture: 2017; KUBOTA engine Operating hours: 1896 Compressor fully operational.

Condition: excellent (used), Year of construction: 2017, overall weight: 403 kg, volume flow: 1.55 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 11 FF screw compressor With refrigerated dryer Gsdpfx Asxn Atgjg Nsuh On a 500 l pressure vessel 11 kW motor Capacity 1.55 m³/min Pressure 13 bar Year of manufacture: 2017 Compressor serviced, filters and oil replaced.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: SF22+, overall weight: 687 kg, power: 22 kW (29.91 HP), volume flow: 144 m³/h, operating pressure: 8 bar, Atlas Copco compressor SF22+ dryer CD45+ set Oil-free compressed air compressor Pressure: 8 bar Capacity: 2.4 m³/min 22 kW Weight: 687 kg Year of manufacture: 2024 Unused compressor and dryer set All employees speak Dutch, German, and English Prices are exclusive of VAT Gujdpfjxby H Dsx Ag Noh Shipping possible (subject to extra charges) (Changes and errors in technical data, information, and pricing as well as prior sale reserved)

Condition: good (used), Year of construction: 2003, Atlas Copco ZT30 compressor Guedpfxsw Dygxs Ag Njh 2003, 30Kw, 7.5Bar, with Ultrafilter dryer HL-ALD0300M and air receiver tank, two sets in stock

Condition: used, Year of construction: 2001, operating hours: 90,000 h, overall weight: 7,000 kg, power: 355 kW (482.67 HP), operating pressure: 10 bar, pressure (max.): 10 bar, type of cooling: water, Good working oil-free compressor, also suitable for spare parts (motor, airend, coolers) Gedpfx Aoxbdppsg Neuh

Condition: excellent (used), functionality: fully functional, total length: 1,950 mm, total width: 1,500 mm, total height: 1,500 mm, Selling here a heat recovery system for compressed air systems. Original Atlas Copco. WRG system for compressor. Dismantled due to insufficient compressor performance. Was hardly used :( Atlas Copco ER90 energy recovery unit - details attached as PDF. For water-cooled oil-free ZR compressor Turn your water-cooled, oil-free ZR compressor into an energy source for hot water with ER, our energy recovery unit. Power: 90 kw Special equipment: Reserve water pump - redundancy 2nd heat exchanger - Very good condition. Gsdpfx Aop N H Husg Nouh Hardly ever used - poor planning! Unfortunately no documents available.

Year of construction: 2008, condition: ready for operation (used), 1) Reciprocating compressor Prematic PAKO 1201/270, year of manufacture: 2008, displacement: 1200L/min, flow rate: 925L/min, tank volume: 270L, speed: 700rpm, power: 7.5kW, operating pressure: 10bar, operating hours: approx. 5257h. 2) Screw compressor Atlas Copco GA7FF, year of manufacture: 1999, operating pressure: 8bar, flow rate: 1092L/min, power: 7.5kW, speed: 3000rpm, weight: approx. 250kg, operating hours: 14057h. Documentation available. An on-site inspection is possible. Gjdpoxf Iinjfx Ag Nouh

Condition: excellent (used), Year of construction: 2012, operating hours: 14,785 h, functionality: fully functional, Second hand oil-free compressor Atlas Copco ZT250FF. 250 kW, 10 bar with 42 m³/min. Integrated drum dryer. Gujdpsxdwr Asfx Ag Neh

Condition: ready for operation (used), functionality: fully functional, power: 168 kW (228.42 HP), fuel type: diesel, color: yellow, overall weight: 16,600 kg, chain condition: 70 %, Year of construction: 2012, operating hours: 6,921 h, Equipment: air conditioning, cabin, Year of manufacture: 2012 Hammer operating hours: 6,921 h Total operating hours: 17,063 h Enclosed cab Air conditioning Rear view camera 6 drill rods (complete set) Drill bit with diameter of 85 mm Fuel filling pump CAT C7.1 Tier 4 Final engine with 168 kW Gjdsxhchwspfx Ag Nsuh CE/EPA Undercarriage 70% remaining Only one previous owner, always fully serviced Manufactured in Sweden Operating weight: 16.6 t Additional information: Drill holes from 64 mm to 127 mm possible Max. drilling depth: 37 m.

Year of construction: 1999, condition: used, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 11049 Specifications: - 1999 model - Hours: approximately 12,750 - Winch - Vacuum cleaner - 38 hammers - 4 cylinder water-cooled Deutz engine - Okay chassis - Ready for delivery Description: Guodpfoxlnlisx Ag Nsh Owner says it works as it should and that it is a 1999 model It is Ready for Delivery Own weight: 1 Model: Copco

Condition: good (used), Year of construction: 2004, machine/vehicle number: A II 151768, Offer 25979 Gujdpfxowrcq Ne Ag Nsh - Operating hours 16550 h - Operating pressure 10 bar - Delivery rate 15.9 l/s - Drive 400 V / 7.5 kW - Motor speed 3000 rpm - Air tank 250 L - Required space approx. W 700 x H 1830 x D 1050 mm - Weight approx. 250 kg

Condition: new, Atlas Copco ROTO Synthetic Fluid FOODGRADE 20 liter container Also available in 5 liter containers Gedpevkf A Hsfx Ag Nouh From stock sale We are on vacation until 06.01.. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: used, Year of construction: 2016, operating hours: 30,370 h, functionality: limited functionality, machine/vehicle number: API261282, overall weight: 279 kg, power: 15 kW (20.39 HP), volume flow: 150.6 m³/h, pressure (max.): 12.75 bar, Equipment: refrigerant dryer, type plate available, The time and date function is defective, which is why we are selling it. Otherwise, the compressor works perfectly. Gujdsxdw Tyjpfx Ag Njh

Condition: excellent (used), functionality: fully functional, We currently have over 15 Atlas Copco GA90 units in stock in various configurations. Frequency-controlled. With integrated dryer. Gusdpjxctxiofx Ag Noh

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 479, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. We offer this used control unit together with the matching STV-ST61-30-40 bolted joint. Technical specifications: Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Screwdriver model: STV-ST61-30-40, year of manufacture: 2017 Power supply: 200-240 V/ (50-60 Hz) Power consumption (W): 320 W Gusdpeulayxofx Ag Nsh Maximum operating temperature: +40.0° C Minimum operating temperature: +5.0° C Frequency: 50-60 Hz For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.

Condition: good (used), Year of construction: 2019, functionality: fully functional, power: 382 kW (519.37 HP), Description: Screw compressor ZR315VSD Gusdpfxevyq Rnj Ag Nsh Characteristics: Capacity 8.60 bar Power 382 kW Voltage 400 V or 500 V Running hours at last maintenance: 7270

Condition: excellent (used), Year of construction: 2014, operating hours: 25,283 h, functionality: fully functional, Screw compressor Atlas Copco GA90FF. 90 kW with 8.25 bar and 16.48 m3/min. Integrated dryer. Gjdpfx Agoxctmys Nouh

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 454, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. We offer this used control unit together with the matching ETP ST32-10-I06 bolted joint. Gsdoulaxzjpfx Ag Nsuh Technical specifications: Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Screwdriver model: ETP ST32-10-I06, year of manufacture: 2022 Power supply: 200-240 V/ (50-60 Hz) Power consumption (W): 320 W Maximum operating temperature: +40.0° C Minimum operating temperature: +5.0° C Frequency: 50-60 Hz For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.