Used Attachment for sale (4,859)

Condition: good (used), Year of construction: 1980, Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, pressure vessel, compressor tank, air receiver for oil-air separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator, air receiver Nlodpezt I I Tofx Afwef -Manufacturer: Atlas Copco, Air tank standing from compressor type GA 408 Pack -Type: 19650295-49 -Contents: 46 l -Operating pressure: 11 bar -Accessories: incl. attachments, see photos -Dimensions: 520/300/H1010 mm -Weight: 62 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 1,153 h, load capacity: 2,000 kg, lifting height: 4,625 mm, free lift: 1,519 mm, load center: 500 mm, fuel type: electric, mast type: triplex, gearing type: converter, battery manufacturer: Linde Li ion Technologie, battery model: Li ion, battery capacity: 335 Ah, battery voltage: 48 V, overall weight: 3,980 kg, total height: 2,121 mm, Equipment: CE marking, full service history, lighting, sideshift, Brand Linde Model E20PH-02 Year of manufacture 2022 Operating hours 1153 hours CE/EPA marking Nlodpjzvxv Hefx Afwof CE Fuel type Electric Battery 48v 16.3kWh Li-ion Charger 48v 375A charger Max. lifting capacity 2000 kg Load center 500 mm Mast type Free-lift triplex Max. lifting height 4625 mm Free lift 1519 mm Mast height (collapsed) 2121 mm Attachments Integrated side shift Tires Solid tires Own weight 3980 kg INSPECTION The forklift will be delivered with a new BMWT inspection certificate DELIVERY SERVICE Delivered with a complete service WARRANTY 3 months warranty Seat type Standard PVC seat Controls Linde 2-pedal system, Linde Load Control Joysticks Productivity Pre-selection mast tilt Lighting LED work lights (front), LED work lights (rear), Blue spot (rear), Orange flashing/rotating beacon Mast & hydraulics 3rd hydraulic valve, 4th hydraulic valve Cab options Heater

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 166 h, load capacity: 2,000 kg, lifting height: 4,625 mm, free lift: 1,518 mm, load center: 500 mm, fuel type: electric, mast type: triplex, gearing type: hydrostat, battery manufacturer: Linde Li ion technology, battery model: Li ion, battery capacity: 283.5 Ah, remaining battery capacity: 100 %, battery voltage: 90 V, tire condition: 95 %, front tire type: cushion tires (non-marking), rear tire type: cushion tires (non-marking), overall weight: 3,800 kg, total height: 2,128 mm, Equipment: CE marking, air conditioning, full service history, lighting, sideshift, Brand Linde Model Xi20P Year of manufacture 2024 Hours recorded 166 hours CE/EPA marking CE Fuel type Electric Battery 90V Li-ion 25.6 kWh Charger Included Max. lifting capacity 2000 Load center 500 Mast type Free-lift triplex Max. lifting height 4625 mm Free lift 1518 mm Mast height 2128 mm Attachment Integrated sideshift Tires Non-marking solid tires Own weight 3800 kg INSPECTION The forklift will be delivered with a new BMWT inspection DELIVERY SERVICE Will be delivered with a full service WARRANTY 3 months warranty Seat type Standard PVC seat Nodpfxjzvw Rvj Afwjlf Controls Linde 2-pedal system, Linde Load Control Joysticks Productivity Preselection mast tilt, Extra configuration buttons A1-A4, F1-F4, Integrated weighing system Cab options Height-adjustable steering column, Linde "VIEW" roof window, Sun visor front & roof window, Bluetooth DAB+ radio, Air conditioning + Heating Special equipment RFID badge access control Lighting LED road lights, LED work lights front, LED work lights rear, Bluespot rear, Orange flashing/rotating beacon Mast & hydraulics 3rd hydraulic valve, 4th hydraulic valve, Pressure-free switching hydraulics Comfort Linde 7" display

Condition: used, machine/vehicle number: 26646, Year of construction: 2015, operating hours: 6,248 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,430 mm, fuel type: gas, mast type: triplex, construction height: 2,160 mm, Equipment: sideshift, .: 26646 Device details: Year of manufacture: 2015 Load capacity: 2500 kg Lifting height: 4700 mm Operating hours (read): 6248 h Free lift: 1430 mm Mast type: Triplex Mast height: 2100 mm Length/Width/Height: 2600 / 1200 / 2160 mm Operating weight: 4020 kg ---- Equipment: * Overhead guard * 3rd valve * Front work light * Rear work light ----- Attachments: * Side shifter ---- Additional device information: Reverse warning device ---- The operating hours are generally the recorded hours. We would be happy to offer you suitable transport. We have another 250 - 300 forklifts, attachments, and sweepers immediately available for you. Of course, we also offer rentals! Nledjzhwhrspfx Afwsf We would also be happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English. We explicitly reserve the right to sell the item subject to prior sale and to correct any errors in this offer. In the dealership, the device is sold in its current condition, without refurbishment. All information is provided without guarantee, subject to errors and changes.

Condition: new, A simple range of scissor type lifts for attaching to a crane hoist for the lifting of panels using (customer supplied) crane. 1 tonne capacity Nlsdpfx Afofqmtkjwsf Minimum wall panel height 2000mm Maximum wall panel height 3500mm One man operation Weight of unit 80kgs

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, quick-change thread cutting chuck Nljdpfx Aoztwupofwof -Manufacturer: Bilz, Thread cutting chuck, quick-change thread cutting chuck, 3 pieces -Type: WFLK 115 B TR 28X2 -Submission/Price: complete -Transport dimensions: 120/40/H135 mm -Weight: 1.9 kg

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Nljdpfx Aszuzw Dsfwof Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: new, length in total / mm band width / mm conveying height / mm Control / Please complete the attached form and return it to us by email for quotation preparation. Hinged Belt Conveyors – Overview & Features General - Hinged belt conveyors can be manufactured according to purpose and dimensions. - The design and belt system are robust and durable, provided regular maintenance is carried out. - Most commonly used type of chip conveyor. Applications Transport of: - Long, coarse, corrugated, and crumbly chips - Materials such as transmission steel, tool steel, aluminum alloys, Teflon, Delrin, etc. - Designed for conveying chips from the production process. Nlsdpfx Afsymf Hnswof - Separation of cutting oil/coolant from the chips. Versions - Available with or without a tank for returning cutting oil/coolant to the system. - Four standard chain pitches: 31.75 mm, 38.10 mm, 50.80 mm, 63.50 mm. - Chain pitch selected according to the amount of chips to be conveyed. - Conveyor width, length, motor, and gearbox are matched to the hourly conveying capacity. - Coolant recycling is taken into account during the design. Control - Operation via control panel or CNC control of the machine tool. - Control via plug-in connection possible. Note: Images are for reference only and are not to scale.

Condition: new, length in total 7969 mm band width 700 mm conveying height 2500 mm total power requirement 0,75 kW Please complete the attached form and return it to us by email for quotation preparation. Hinged Belt Conveyors – Overview & Features General - Hinged belt conveyors can be manufactured according to purpose and dimensions. - The design and belt system are robust and durable, provided regular maintenance is carried out. - Most commonly used type of chip conveyor. Applications Transport of: - Long, coarse, corrugated, and crumbly chips - Materials such as transmission steel, tool steel, aluminum alloys, Teflon, Delrin, etc. - Designed for conveying chips from the production process. - Separation of cutting oil/coolant from the chips. Nedpfx Afoymf Tnswelf Versions - Available with or without a tank for returning cutting oil/coolant to the system. - Four standard chain pitches: 31.75 mm, 38.10 mm, 50.80 mm, 63.50 mm. - Chain pitch selected according to the amount of chips to be conveyed. - Conveyor width, length, motor, and gearbox are matched to the hourly conveying capacity. - Coolant recycling is taken into account during the design. Control - Operation via control panel or CNC control of the machine tool. - Control via plug-in connection possible. Note: Images are for reference only and are not to scale.

Condition: new, Year of construction: 2026, Please fill in the attached form so that we can make you a suitable offer. If you have any further questions, please do not hesitate to contact us. These conveyors can be manufactured according to the required purposes and dimensions. As the general structure and belt system, hinged belt conveyors are long-lasting as long as maintenance is done regularly. Nlsdsy S D Ngjpfx Afwjf Hinged Belt Conveyors are used to convey a wide range of long, coarse, curled and crumb type chips from transmission steel, work tool steel, aluminium alloy metal as well as other materials such as Teflon, Delrin, etc. Hinged belt conveyors are the most commonly used type of chip conveyors. These are the systems designed for the purpose of conveying chips coming out of the production process and separating cutting oil/coolant from the chips. Hinged belt conveyors can be manufactured with or without a tank to return cutting oil/coolant to the system. In our standard production we use four types of chain pitches 31.75 , 38.10 , 50.80 , 63.50. Chain pitch is decided according to the amount of chips to be conveyed and the width & length of the conveyor, motor and gearbox are selected according to the amount of chips to be conveyed per hour. Coolant recycling is taken into account in this selection. The conveyor can be controlled from a panel or from the CNC control of a machine tool by using a socket connection. Our chip conveyors are manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Turkey. The pictures are for orientation purposes only and are not true-to-scale representations of the machine.

Condition: used, Year of construction: 1997, Profiling line, consisting of DEP Gabbiani + Weinig planing machine DEP Manufacturer: Gabbiani Type: T-Module 80/1600 Year of manufacture: 1997 Planing machine Manufacturer: Weinig Type: 22 BL Year of manufacture: 1995 Technical data of the DEP - 6 machining motors per side - 2 fixed scoring units, 3.2 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 slotting units: 12.5 HP / 3000 + 4500 RPM - 2 free spaces - 1 feed motor: 4 HP / 1400 RPM Angle transfer between DEP and planing machine - Length: 290 - 1600 mm (1800 mm) - Width: 18 - 150 mm - Thickness: 5.5 - 50 mm - Density: 600 kg/m³ - Output max.: 150 workpieces/min - Belt conveyor after the double-end profiler - Toothed belt conveyor with brush attachment as counter holder - Cam conveyor for singulation - Toothed belt conveyor as buffer section - Longitudinal discharge - Roller conveyor before the planing machine - Control: Vipa, compatible with Siemens S7 300 - Safety technology Protective door switches: 3 Safety light barriers: 1 Technical data of the planing machine Working width and working height - Working width: 20 - 230 mm (with tool diameter 125 mm) - Working height: 9 - 140 mm (with tool diameter 125 mm) Infeed table - Length: 2000 mm - Adjustment range of the jointer table: 10 mm - Adjustment range of the fence: 10 mm Surfacing table Njdpfozuzfbex Afwelf - Length: 1200 mm - Adjustment range of the table: 10 mm - Adjustment range of the fence: 10 mm Jointer spindle - Motor power: 5.5 - 15 kW Thicknessing spindle - Motor power: 5.5 - 11 kW Left spindle - Motor power: 5.5 - 11 kW 2. Right spindle - Motor power: 5.5 - 11 kW Top spindle - Motor power: 5.5 - 22 kW Bottom spindle - Motor power: 5.5 - 22 kW Universal spindle - Motor power: 5.5 - 11 kW Feed - Cardan feed, continuously adjustable: approx. 6-36 m/min - Motor power: 4 - 8.6 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2001, - Cutting length: 5800 mm - Cutting width: 2 x 2200 mm - Max. cutting height: 100 mm Panel dividing and solid wood saw Manufacturer: PANHANS Type: EURO 32 Year of manufacture: 2001 Dimensions: - Cutting length: 5800 mm - Cutting width: 2 x 2200 mm - Max. cutting height: 100 mm Nsdjzuy Egepfx Afwjlf Machine attachments: - Roller table at the rear: 3982 mm - Support beam at the rear: 9 pieces, 40 x 4056 mm - Air cushion table at the front: 2 pieces, 600 x 1800 mm, adjustable Air cushion table at the front for miter cutting device: 1 piece, 600 x 1400 mm - Air cushion miter table: 600 x 1800 mm, left - Miter ruler: up to 2060 mm - Clamps: 9 pieces, adjustable - Stop jaws: 2 pieces, adjustable - Side pressure: 65-1365 mm, stepless Special accessories: automatic miter cutting device - Special version: hydraulic lifting table with roller conveyor, infeed roller conveyor, 4 length edgers, 4 panel extractors Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: new, plate depth 2000 mm plate width 1500 mm plate height 300 mm weight 2385 kg dimensions of the machine ca. 2000 x 1500 x 300 mm GERD WOLFF clamping plate 2000 x 1500 x 300 mm If you cannot find the size you need, you can also send us an e-mail with the completed PDF form (attached). This way we can manufacture a clamping plate for you according to your requirements. T-slot size: 48 x 28 T-slot spacing: 300 Number of slots: 5 Edge distance: 150 Nlsdpfxeyk Ih No Afwjf Weight: 2385 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/II

Condition: new, plate depth 5000 mm plate width 1500 mm plate height 300 mm weight of the machine ca. 6060 kg required space 5000 x 1500 x 300 mm GERD WOLFF clamping plate 5000 x 1500 x 300 mm If you cannot find the size you need, you can also send us an e-mail with the completed PDF form (attached). This way we can manufacture a clamping plate according to your requirements. T-slot size: 52 x 28 T-slot spacing: 300 Number of slots: 5 Edge distance: 150 Weight: 6060 kg Casting quality HT250 Flatness less than 0.12 mm Nljdpfx Ajyk Ilusfwof Surface machined according to DIN 876/III

Condition: new, plate width 4000 mm plate depth 1500 mm plate height 310 mm weight 4930 kg dimensions of the machine ca. 4000 x 1500 x 310 mm GERD WOLFF clamping plate 4000 x 1500 x 310 mm If you cannot find the size you need, you can also send us an e-mail with the completed PDF form (attached). This way, we can manufacture a clamping plate according to your requirements. T-slot size: 52 x 28 Nljdpfoymf T Uex Afwsf T-slot spacing: 300 Number of slots: 5 Edge distance: 150 Weight: 4930 kg Casting quality HT250 Flatness less than 0.12 mm Surface treatment according to DIN 876 / III

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm Conventional lathe with copying attachment and extensive accessories Turning diameter over cross slide: 240 mm Spindle bore: 52 mm Turning diameter: 360 mm Center height: 180 mm Turning length: 1,000 mm Overall length: 2,200 mm Overall width: 750 mm Overall height: 1,400 mm Maximum spindle speed: 1,750 rpm Min. spindle speed: 60 rpm Total weight: 1,800 kg Nsdjv Rgzwopfx Afwolf All technical specifications are subject to change without notice. Deviations may occur depending on the year of manufacture, model, or condition of the machine. We assume no liability for the accuracy or completeness of this information.

Condition: new, plate width 3000 mm plate depth 1500 mm plate height 300 mm weight 3580 kg dimensions of the machine ca. 3000 x 1500 x 300 mm GERD WOLFF clamping plate 3000 x 1500 x 300 mm If you cannot find the size you need, you can also send us an e-mail with the completed PDF form (attached). This way, we can manufacture a clamping plate according to your requirements. T-slot size: 52 x 28 T-slot spacing: 300 Number of slots: 5 Edge distance: 150 Weight: 3580 kg Casting quality HT250 Njdpfx Aoyk Ik Defwjlf Flatness less than 0.12 mm Surface machined according to DIN 876/III

Condition: used, weight max. in kg / kg fork length / mm stroke height / mm HOPPECKE battery charger D400 45.6/200 FT B-FRFT Battery capacity: 104Ah Battery Rated Voltage: 45.6V Charging Voltage: 1.60Vpc Nodpfxoy Tbu Nj Afwelf Umax shutdown: 1.68 Vpc Charging current: 200A Degree of protection: IP21 Article number: 516742

Condition: new, plate width 1000 mm plate depth 1000 mm plate height 300 mm weight 975 kg GERD WOLFF clamping plate 1000 x 1000 x 300 mm If you cannot find the size you need, you can also send us an e-mail Njdpfx Aoyk Ilhofwjlf with the completed PDF form (attached). This way, we can manufacture a clamping plate according to your requirements. T-slot size: 52 x 28 T-slot spacing: 300 Number of slots: 3 Edge distance: 200 Weight: 975 kg Casting quality HT250 Flatness less than 0.12 mm Surface treatment according to DIN 876 / III

Condition: new, plate width 3000 mm plate depth 2000 mm plate height 300 mm weight 4600 kg GERD WOLFF clamping plate 3000 x 2000 x 300 mm If you cannot find the size you need, you can also send us an e-mail with the completed PDF form (attached). This way, we can manufacture a clamping plate according to your requirements. T-slot size: 52 x 28 T-slot spacing: 300 Number of slots: 6 Nodpfx Afsyk Ikkjwelf Edge distance: 100 Weight: 4600 kg Casting quality HT250 Flatness less than 0.12 mm Surface treatment according to DIN 876 / III

Condition: new, plate width 4000 mm plate depth 1000 mm plate height 300 mm weight 3500 kg dimensions of the machine ca. 4000 x 1000 x 300 mm GERD WOLFF clamping plate 4000 x 1000 x 300 mm If you cannot find the size you are looking for, you can also send us an e-mail with the completed PDF form (attached). This way, we can manufacture a clamping plate according to your requirements. T-slot size: 52 X 28 T-slot spacing: 300 Number of slots: 3 Edge distance: 200 Weight: 3500 kg Casting quality HT250 Njdpjyk Ikwsfx Afwjlf Flatness less than 0.12 mm Surface machined according to DIN 876/II

Condition: new, plate width 1500 mm plate depth 1000 mm plate height 310 mm weight 1330 kg GERD WOLFF clamping plate 1500 x 1000 x 310 mm If you cannot find the size you need, you can also send us an e-mail with the completed PDF form (attached). This way, we can manufacture a clamping plate for you according to your requirements. T-slot size: 52 x 28 T-slot spacing: 300 Number of slots: 5 Edge distance: 150 Weight: 1330 kg Nsdpfx Afeyk Ilzswjlf Casting quality HT250 Flatness less than 0.12 mm Surface treatment according to DIN 876 / III

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment - Fixed stop on the left in feed direction Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track - automatically lowerable and automatically centering. Equipped on each side with: Release agent application, top and bottom Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Nodjzuyqispfx Afwjlf Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented

Condition: used, Year of construction: 1985, Folding system Note: The system has been refurbished and received a new control system in 2013! Folding system consisting of: Lifting table with pusher Roller conveyor Nljdpfxszuynzo Afwof Infeed Transfer system and workpiece pre-cleaning Double-end profiler Manufacturer: Homag Type: FG63 Year of manufacture: 1985 Technical data - with adhesive strip application - Machine for profiling and folding the edge strips - Milling station on both sides - Control system: Siemens Simatic Touch - Glue application unit - Folding unit for folding the pre-folded workpieces - Sliding shoe for pressing - Extraction table for material removal Electric scissor lift table Manufacturer: Altek Year of manufacture: 2014 Technical data - Load capacity max. 1000 kg - with attached roller conveyor - Dimensions approx. 3100 x 1000 mm - with height measuring device for automatic detection of stack height and corresponding cycle time Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Njdpfx Aszuykvsfwolf Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order