Used Aufspannen Swivelling Table for sale (19,110)

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Kedpfx Adoxak Hxodjdg Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: new, table length 1500 mm Kdsdpfx Adjxaa Rtedjg table width 1000 mm table height (lateral area) 100 mm weight 255 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 1500 x 1000 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 466 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Kodpfx Aexaableddsdg Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided 750 version with scale - incl. 6x base equipment

Condition: new, table load 1000 kg table diameter 900 mm turning speeds 0,12 - 1,2 U/min swivelling range 0 - 135 Grad speed Kipp 0,35 U/min welding current 500 A dimensions of the machine ca. 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Kdodpfx Adsxaac Aodog Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Furnishing : - 1 control (integrated) - 1 wired remote control

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0,6 - 6,0 U/min spindle bore 60,0 mm swivelling range 0 - 90 Grad weight of the machine ca. 62 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of Ksdpfx Adsxaafqodsdg 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90 Grad turning speeds 0,2 - 2,0 U/min turning speeds 1,2 - 12,0 U/min bore 20,0 mm weight of the machine ca. 50 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt Kdedpfxexaatnj Addog - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table length 2000 mm table width 1000 mm Kodpfsxaa Hbsx Addodg table height (lateral area) 100 mm weight 351 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 100 mm weight 726 kg The welding tables are provided with a scale as standard. Kodpfxjxab D Uo Addedg Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Plasma nitrided version Professional 750 with scale - Including 8x basic equipment

Condition: new, weight max. in kg 1000 kg table width 800 mm stroke height 190-1010 mm table length 1300 mm stroke of worktool slide 40 mm/sek. weight 220 kg Furnishing: Kdjdoxak E Iepfx Addsg - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm side-clamping surface: 200 (Höhe) mm weight 1517 kg SIEGMUND authorized dealer - all items available! Kdjdoxaa Nvepfx Addsg Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment

Condition: new, table length 2400 mm table width 1200 mm Kjdpfexflftsx Addodg table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND Authorized Dealer - All items available! !! SPECIAL OFFER !! SIEGMUND Welding Table Retro 2400x1200x200 incl. accessories Product description - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5–27 mm - Hole Ø 28 mm - Holes surface 100x100 mm grid - Corners, edges, and holes rounded - Side panel height 200 mm - Side panel holes in diagonal grid - Construction reinforced with ribs - Grid lines enable precise assembly The welding tables are equipped with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load capacity Features: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma-nitrided version with scale - Includes 4x feet Basic equipment - Includes accessory set (see image 3): * 6x 280604 * 12x 280511 * 8x 280420.N * 2x 280110.N * 1x 283999

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. turning speeds 0,6 - 6,0 U/min swivelling range 0 - 90 Grad bore 60,0 mm motor 230 Volt weight of the machine ca. 56 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. Kodsxabm Nspfx Addjdg - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: as good as new (ex-display), Year of construction: 2024, weight max. in kg max. 1000 kg turning speeds 0,18 - 0,58 U/min height 976 - 1436 mm inclination 0 - 115 ° table diameter 895 mm voltage 380 V total power requirement 2,0 kW weight 685 kg range L-W-H 2414 x 920 x 1436 mm Exhibition machine from 2024 with only approx. 2x operating hours Condition NEW!! Special price on request The AK BEND SRH hydraulic welding positioner is ideal for welding, assembly and maintenance work. Positioning is done via a hydraulic rotation and tilting function. Description: - electro-hydraulic turning and tilting function - Fast handling of workpieces - Maximum productivity thanks to optimal working position - Lifting, tilting and turning workpieces in one clamping - Low idle times thanks to turning components Kdodpfxsw U U R Ej Addjg - Maximum work performance thanks to comfortable working - Back-friendly working for the user Equipment: - Continuously variable speed adjustment - Freely movable foot switch - Hand-held remote control with 5 meter cable - Freely movable control panel with digital speed display - Analogue angle display * Manufacturer video (identical rotary table): ?v=Vayw8Ny64nc

Condition: new, table length unterschiedlich mm table width unterschiedlich mm table height (lateral area) unterschiedlich mm weight ca. 240 kg Description : - Special set for SIEGMUND 28 clamping tables - original SIEGMUND accessories (!!) included : - 1x 28 mm mobile tool trolley - 30x quick release bolts with short twist lock - 8x universal stop 150 L - nitrided - 4x universal stop 225 L - nitrided - 8x stop and clamping angles 175 L - cast - 2x stop and clamping angle 500 G left - nitrided - 1x stop and clamping angle 750 G left - nitrided Kodjxabvdepfx Addjdg - 1x stop and clamping angle 750 G right - nitrided - 1x stop and clamping angle 500 G left - nitrided - 1x stop and clamping angle 500 G right - nitrided - 4x stop and clamping angles 300 G left - nitrided - 8x prism Ø60-135° burnished - 16x Professional screw clamp - Nitrided - 6x Professional screw clamp 45°/90° - Nitrided - 4x universal stop 300 - nitrided - 1x accessory set consisting of: - eccentric, Allen key, brush, - other accessories such as: Probe CleanBasic, Probe Non-Stick and burner holder

Condition: used, Year of construction: 2002, machine/vehicle number: MR006281, Used spindle moulder table in good condition, equipped with a feeder unit, immediately ready for use. Price ex Staphorst. Technical specifications: - Tilting spindle: No Kjdpfxex Tt N Es Addedg - Spindle diameter: 40 mm - Serial number: KK000101

Condition: used, Workbench, clamping plate, ball roller table, ball table, ball roller table -Storage table: shelf with roller conveyor, mobile, height-adjustable -Plate: 2000 x 1000mm, thickness 3mm -Height: 980 to 1160 mm -Cut-out: 250 x 250 mm -Steel frame: solid with castors Kjdpfx Aoilh Iwoddsdg -Total dimensions: 2000/1000/H980 mm -Weight: 90 kg

Condition: good (used), Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Rotary table: with three-jaw chuck -Mouth size: Ø 160 mm Kedpeitv A Esfx Addedg -Spindle bore: Ø 42 mm -Dimensions: 510/320/H220 mm -Weight: 50.9 kg

Condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, table saw saw unit: 45° pivotable Kdsdpfx Aem Hd Sfoddjg -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 250 mm, (max. Ø 300 mm) - Cutting height 55 mm (max. ca. 100 mm) -Cutting width: 350 mm -Miter cut: up to 45° -Dimensions 1000/840/H1240 mm -Weight: 162 kg

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg Kdodpfxonzpx Ro Addjg

Condition: good (used), Year of construction: 1972, Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table -Manufacturer: Platten, scissor lift table type 6.0 T/F/A -Load capacity: 6000 kg -Platform: approx. 1740 x 1280 mm Ksdpfxjn Hbbuj Addjdg -Dimension when retracted: Height 975 mm -Extended dimension: Height 1390 mm -Hydraulic unit: Kunz/Elmot 1.5 kW / 180 bar -Transport dimensions: 1740/1280/H1985 mm -Empty weight: 1270 kg

Year of construction: 1973, condition: used, Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, dividing table, vertical dividing table -Manufacturer: Peiseler, clamping table part table type GT 320x320 -Table surface: 320 x 320 mm -T grooves: groove width 14 mm, groove spacing 100 mm -Spindle bore: Ø 30 mm -Dimension: 475/410/H125 mm -Weight: 85 kg Kodpjqddi Refx Addjdg

Condition: good (used), Clamping table, T-slot table, milling machine table, drilling machine table, boring machine table -Clamping table: drilling machine table Kodpfx Aet H Tqteddjdg -Table surface: 480 x 330 mm -Bore: Ø 48 mm bolt circle Ø 108 x 13 mm -Groove width: 13 mm -Dimensions: see photo -Dimensions total: 540/550/H70 mm -Weight: 30 kg

Condition: used, Clamping table, clamping angle, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck Kdedpfx Ajt Trw Soddsg -Round table with three-jaw chuck -Chuck size: Ø 315 mm -Spindle bore: Ø 103/28 mm -Dimensions: 460/270/H410 mm -Weight: 123 kg

Year of construction: 2012, condition: used, Clamping plate with threaded hole and cross table, clamping angle, T-slot table, rotary table, milling machine table, upper support, top slide, dovetail guide, tool slide, cross table, cross support -Manufacturer: Santenberg, clamping table: milling machine table from CNC machining center GTC S 2 -Linear guide: THK YNA419 -Shaft: Ø 20 x 45 mm Ksdokm Rn Sopfx Addjdg -Dimensions: see photos -Total dimensions: 715/530/H285 mm -Weight: 222kg

Condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, circular table saw, circular saw -Manufacturer: White Paisley, table saw on solid base -Motor power: 6.3 kW / 1430 rpm Kodpfx Aoi I Hc Uoddodg -Saw blade: Ø 550 mm -Max. Cutting height 180 mm -Cutting width: up to 455 mm -Table height: 850 to 1000 mm -Chip extraction: Extraction system can be supplied at an additional cost -Dimensions 1240/1100/H1500 mm -Weight: 762 kg