Used Swivel Radius for sale (5,440)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 29,000 h, functionality: fully functional, Complete ABB welding robot system consisting of: Robot IRB 2400, floor-mounted, with IRC 5 M controller, 2004 Welding equipment Fronius TPS 5000, wire feeder, welding torch, torch cable package Manipulator IRBP 750 K, 2-station rotary table with a center-to-center distance of 2500 mm and a swivel radius of 500 mm. Load capacity per station: 750 kg Light curtain in front of the loading station Bwjdpfj Agnp Njx Abrow The system is still in operation and can be inspected. The system still needs to be dismantled. Assistance is possible. The system will be available from the end of November.

Condition: refurbished (used), functionality: fully functional, power: 23.17 kW (31.50 HP), overall weight: 1,630 kg, fuel type: diesel, fuel: diesel, wheelbase: 1,680 mm, Year of construction: 2003, operating hours: 3,527 h, machine/vehicle number: 10309448, REFORM BOKI COMPACT EXCAVATOR 2551E – USED EQUIPMENT CHASSIS NO. 1039448, Bodpfx Abj Ahyf Ujroww CURRENTLY WITH 3,527 OPERATING HOURS Completely Overhauled: - Thoroughly cleaned - Cabin repainted - Support feet repainted - New grapple shells - New service: oils, filters, etc. - UVV inspection passed Standard Equipment: - Handle-guided 3-wheel excavator - Sound-damped - Outside width adjustable from 0.83 to 1.25 m - Speed of 0-6 km/h adjustable purely mechanically on the drawbar - UVV approved - GS mark "tested safety" Engine: - with water-cooled 4-cylinder diesel engine - 23.2 kW / 31.5 HP at 3,000 rpm according to DIN 70020 - Displacement 1,335ccm Electrical System: - Alternator 14V / 35A - Battery 12V / 63 Ah - Work lights Drive System: - Hydrostatic all-wheel drive via wheel hub motors - BOKILOCK DIFFERENTIAL LOCK SYSTEM - Can be activated from the drawbar and switched during operation - Stepless adjustment of the driving speed on the drawbar 0-6 km/h - Mechanical starting protection on the drawbar - Sensored front axle for automatic activation of the boom safety function Chassis: - Torsionally stiff frame made of fine-grain steel Steering: - The spur gear is actuated via the steering drawbar Brake: - Service brake via the hydrostatic drive Tires: - 18 x 9.50 - 8 (lawn tread) Hydraulics: - 2-lever joystick control on adjustable control unit - No visual obstruction by control elements - Pre-set hydraulic valves - All functions controlled proportionally - Two-circuit hydraulics - Hydraulic tank: 40 l, operating pressure: 180 bar - Biologically rapidly biodegradable hydraulic fluid - Based on poly-alpha-olefins (PAO) - Currently 4,000 operating hours change interval - (Water hazard class 1) Swivel Mechanism: - Upper carriage rotates continuously on an internally toothed slewing ring - Locking by means of a pin in the cabin Excavator Superstructure: - Box-shaped boom and excavator arm made of hot-rolled MSH profiles - Outreach 3,750 mm from the outer edge of the base frame - Automatic detection of the operating status automatically activates the "boom lowering" function when the device is supported (this allows the pressure on the earth grab to be significantly increased in difficult ground conditions) - Lifting force: 830 kp at 3,000 mm - Load holding valve, pre-tension valve and hose rupture protection - 4 two-part, hydraulic supports, play-free horizontal locking by means of forged toothed discs (unlimited adjustment options) - Support cylinders with integrated hose rupture protection (no risk of collapse in the event of external damage to the hydraulic lines) - Support plates with 2 locking claws Grab Bucket: - Earth grab / two-shell grab with integrated, central closing cylinder, grab swivel device approx. 210° - Dimensions: 750 x 830 mm standard Half Cabin: - Fully closable with side window, optimal view of the work area due to glazing that extends to the floor - Windshield can be opened - Entrance-side curtain with window - Folding footrest - Weatherproof, suspended and hydraulically dampened driver's seat - Hot water blower heater Dimensions and Weight: - Length / transport position: 3,600 mm - Width: 830 mm - Height: 2,115 mm - Track min: 830 mm - Track max: 1,250 mm - Weight: 1,630 kg - Wheelbase: 1,680 mm - Turning radius: 1,780 mm

Condition: good (used), Year of construction: 2000, Donau Danuflex 145 Donau Danuflex 145 high-speed radial drilling machine, year of manufacture 2000, in SUPER condition CE compliant!! Technical data: Year of manufacture: 2000 Drilling and threading capabilities Drilling capacity in steel: approx. 42 to 45 mm Threading: up to M36 Tool holder / spindle: MK 4 Spindle speed: 15 to 2,800 rpm (infinitely variable) [1, 2, 3] Travel distances & work area Outrigger travel: 1,050 mm Drilling radius: min. 540 mm / max. 1,590 mm Quill stroke: approx. 200 to 220 mm Column stroke (W-axis): approx. 450 mm Column diameter: 195 mm Table & dimensions Work table: typically approx. 1,200 x 750 mm with 5 T-slots Work table height: approx. 905 mm (ergonomic design for standing operation) Feed: automatic / stepless quill feed with electromagnetic feed clutch Equipment (standard): Threading device, hydraulic clamping for outrigger and lifting column, central lubrication and machine light Accessories and equipment: Several work tables About the machine: Offered is a Donau Danuflex 145 high-speed radial drilling machine. This high-speed radial drilling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Up to 3 fixed machining stations ensure maximum flexibility in the machining of workpieces, both large and small, as well as very long parts. Swivel tables allow the machining of angled bores. Large travel distances and workpiece heights up to 1500 mm are ensured. Effortless, simultaneous positioning to a drilling position in 3 axes. A self-centering spindle head positions itself precisely in centering bores. Concentric countersinking is achieved by self-centering countersinks in the bore. The guides are regularly lubricated by the central lubrication system. The Donau has been mechanically and electrically tested by us. Take the opportunity to inspect and try out the Donau on site under power. Bwjdpfoz Rwpyjx Abrsw You can find more drilling machines from well-known manufacturers on our website.

Condition: good (used), Year of construction: 2008, functionality: fully functional, The Depo/ZPS machining center features an overhead gantry, meaning that all machine movements are performed by the tool. As a result, the mass of the workpiece and clamping device remains constant during machining. Year of manufacture: 2008 Spindle hours approx. 3,500 h (after spindle replacement in 2023) Control system: - Heidenhain iTNC 530 - Heidenhain HR 410 handwheel - Swiveling control panel with 15.1" monitor - Integrated Ethernet interface Technical Data Travel ranges: X 1,000 mm, Y 900 mm, Z 600 mm Work table: - 1,200 mm x 1,000 mm - Max. workpiece weight: 3,000 kg - Max. workpiece size: 1,000 mm x 800 mm x 700 mm Milling spindle: - Continuous power: 30 kW - Speed range: 1-18,000 rpm - Torque S1/100%: 80 Nm - Tool holder: HSK 63 form A - Main spindle jacket cooling - Air through spindle center for tool cooling (ILZ) - Coolant with 40 bar through the spindle (IKZ) Axes feed rates: Bsdpfjy Hp Rrjx Abrsww - X, Y, Z axis feed up to 40 m/min - X, Y, Z axis rapid traverse up to 40 m/min Tool changer with double-arm gripper: - Number of tools in drum magazine (outside working area): 38 - Max. tool diameter: 80/115 mm - Max. tool length: 250 mm Tool and workpiece measurement for automatic tool and part size adjustment: - Tool radius and length measurement - Tool breakage detection - Blum laser for component measurement (Inspect) Disposal system: - Gooseneck slat conveyor - (Chip cart to be provided by buyer) Additional equipment: - Minimum quantity lubrication Minibooster 2 - Machine enclosure with full-area protective covers - Crane loading possible by unhooking the chip protection device at the front - Workspace lighting with two fluorescent lamps on the side walls Machine data: - Space requirement including service areas (LxWxH): approx. 5,000 mm x 4,220 mm x 3,830 mm - Machine weight incl. additional units: approx. 13,000 kg - Connected load: 45 kVA, 400V, 50 Hz This machining center is located in a precision tool and mold making shop. It is exceptionally well-equipped with practical features and is in very good condition. The Depo/ZPS Dynamic 1009 operates precisely and reliably. There is no maintenance or repair backlog.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, This vertical machining center, including the "Clamex unit," is for sale and has only a few operating hours. The machine is being sold because we have switched to a nesting machine. In 2021, the machine was upgraded with a more powerful vacuum pump (16.3 m³). The machine also includes various vacuum clamping devices; we purchased several larger plates in addition to the standard equipment. Workpiece size: X = 200 - 3200 mm (longer with additional support) Y = 70 - 1200 mm (= max. clearance) Material thickness: Z = 8 to 70 mm Max. contour milling dimension in the X-direction without clamping: X = 1500 mm Max. contour milling dimension in the Y-direction: Y = 985 mm ./. milling cutter radius Max. drilling dimension horizontally in the X-direction: H = 1168 mm Z-axis travel: Z = 240 mm Maximum programmable speed: Vector speed: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Milling head 7830, power: 7.5 kW (S6), air-cooled with HSK-F 63 tool holder n(max.) = 1000 - 24,000 min-1, continuously adjustable with collet chuck with HSK shank, ceramic ball bearings (hybrid bearing), tool weight max. 6 kg (incl. holder) Tools: max. Ø 110 mm, tool length max. 80 mm Tool changer 7887, 6-position magazine - pick-up system, pneumatic Max. Ø tool: Ø 110 mm Maximum tool weight: > 5 kg per tool or 30 kg when fully loaded Can be equipped with collet chuck with HSK shank Tool changer 7874, 1-position aggregate magazine, swiveling in X and Y direction, only for special bevel gear 7869 with HSK holder Vertical spindles can be individually activated Arrangement in L-shape, 5 in X and 4(5) in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: Alternating clockwise/counterclockwise n(max.) 1000 - 4400 min-1, continuously adjustable Holder: M 10 thread - interference fit 11 mm without tool, without holder 6 horizontal spindles 2 double drilling spindles in X direction 1 double drilling spindle in Y direction Holder: M 10 thread, interference fit 11 mm Total drill length max. 63 mm from the mounting end without tool, without holder Sawing unit Integrated sawing unit for sawing/grooving in X direction n(max.) 1000 - 5650 min-1, continuously adjustable Tool holder: A max Ø = 120 mm, I Ø = 20 mm, B = max. Bsdpoz In Ugjfx Abroww 4.0 mm 4-axis "CLAMEX" tool set - Includes original tool set consisting of 2 pcs. P-system grooving cutter, DP (diamond) 100.4x7x30mm, Z3, NLA 4/6,6/48mm 1 pc. Milling mandrel for P-system grooving cutter S20x50mm, d=30, L=102, DTK 48mm 1 pc. Milling mandrel for P-system grooving cutter S16x55mm, d=30, L=68, DTK 48mm 1 pc. CNC drill 6mm for Clamex P L= 57.5 / shank 10x27 / left 1 pc. Adapter for drill with shank d= 10 mm (left) 1 pc. Collet DIN 6388 form B, double slit, size 25 Clamping diameter 20, for HSK-F 63 holders Drilling unit: Drill Ø5, 6, 8 mm 35mm pot band 20mm countersink Drill horizontally + vertically: 8mm Milling cutters: 8mm Dia NL32mm 16mm Dia NL43mm 16mm Dia NL9mm 20mm insert NL55mm

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, workpiece weight (max.): 150 kg, grinding length: 500 mm, grinding wheel diameter: 455 mm, grinding diameter: 300 mm, workpiece weight between centers: 150,000 g, type of input current: three-phase, workpiece diameter between centers: 500 mm, grinding wheel width: 75 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 10 rpm, grinding spindle motor power: 7,500 W, overall weight: 4,600 kg, Demonstration CNC cylindrical grinding machine with automation setup Brand OKAMOTO Model OGM-350 P NCIII Year of manufacture 2020 Control: Fanuc Oi Model D Operating hours: approx. 200 hours Technical specifications Maximum swing diameter: 320 mm Maximum distance between centers: 500 mm Maximum workpiece diameter to be ground: 300 mm Maximum workpiece weight between centers: 150 kg Maximum workpiece weight: flange + chuck + workpiece: 40 kg Grinding wheel: Diameter x width x bore: 455 x 75 x 127 mm Wheel speed: Continuously variable Circumferential speed: 45 m/sec Grinding headstock (x-axis) Maximum travel: 300 Swivel angle: Non-swivel Workpiece table (z-axis) Travel: 870 mm Swivel angle: 0 – 10° Workhead Fixed/Live Center Design MK 4 Taper Chuck Spindle Bore Diameter 20 mm Spindle Speed ​​10 – 500 rpm Swivel Angle: Non-Swivel Tailstock Tailstock Type: Manual Fine Taper Adjustment Quill Travel 30 mm MK 4 Taper Chuck Drive Power Grinding Wheel Drive 5.5 kW Total Power 20 kVA Dimensions/Weight Length x Width x Height approx. 3400 x 2330 x 1950 mm Machine Weight approx. 4,600 kg Standard Equipment: 2 Carbide Centers Full FANUC Keyboard with Radius Compensation for Creating ISO Programs Workshop Programming: Graphic Software for Grinding and Dressing Cycles with Teach-in Function GAP Eliminator Bjdpfjzn U S Iex Abrsww Shoulder Positioning Constant Table coolant flush 3 color LED lamp Documentation Leveling screws and support plates Operating tool set Accessories Automation preparation Automatic door Automation interface Grinding wheel guard fully open when door is open Miscellaneous Signal lamp Tailstock with electric quill retraction 1 flange 1 grinding wheel Options upon request: Paper belt filter on request Clamping devices on request Commissioning and training on request (Commissioning by Okamoto is required for warranty purposes) Transport on request

Condition: good (used), Year of construction: 2021, functionality: fully functional, Matec HV 700, Year of manufacture 2021, Heidenhain TNC 640 control system, Travel range X/Y/Z 2600/700/950 horizontal, Travel range X/Y/Z 2600/700/950 vertical, 50-position tool changer, HSK 63 tool holder, Spindle speed up to 15,000 rpm, NC swivel milling head +/- 105°, Swivel radius 250 mm, NC rotary table Ø 750 mm, IKZ (internal cooling) 20 bar, Paper band filter, Direct measuring systems, Chip conveyor, Electr. handwheel, Dynamics package, Software Kinematics Option, Measuring probe, Partition, S1 approx. 2000 total spindle hours, S2 approx. 25 total spindle hours. Bedpsz Dgzdjfx Abrsww

Condition: excellent (used), Year of construction: 1999, Double-sided multi-purpose edge sanding machine with oscillation and 200mm sanding height. Langzauner LZK 4-S with veneer edge sanding side and solid wood sanding side. 200mm sanding width. Motorized sanding belt oscillation, therefore no compressed air connection required. Drive motor 400V / 3kW. Front work table for sanding veneer edges with grooved stop guide (for veneer overhang). Veneer sanding attachment with fine adjustment, foldable. Spring-loaded table, height adjustable and can be positioned laterally. Angle stop. Rear, inclinable work table for sanding solid wood. Both tables are height adjustable to utilize the sanding belt. Belt dimensions 3000 x 200mm. Side extension table for radius sanding on the 150mm belt roller. Feed stand holder 68mm. Central dust extraction connection 140mm. Very stable chassis, 2 swivel casters, 2 steering casters and lever brake for locking. CE marking. All graphite pads and dust extraction hoses have been replaced. Bwedpfx Asz I T Apebrew Original paint, only touched up in places. Excellent condition from a small restoration workshop. Some sanding belts are included. Dimensions approx. 1800 x 1000 x 1250mm (L x W x H). Weight approx. 650kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this seller".

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 with special paint finish and 3-axis digital readout K&C NEW, in excellent condition. Technical data: >> Machine no. 2200-1958 >> Long sliding head >> 3-axis digital readout K&C NEW >> Swivel table with tilting and rotating function >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travels X/Y/Z: 500/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical and horizontal quill, extendable - SK-40 >> Collet system S20x2 >> Weight approx. 1100 kg Bjdpe Agwvmofx Abrjww Accessories and equipment: >> 3-axis digital readout K&C, newly installed with manufacturer's warranty and operating manual. Display unit: Setting reference points, setting zero points, entering coordinates, switching between mm/inch, absolute or incremental coordinates, circular functions, hole patterns, radius milling functions, etc. >> Coolant system About the machine: Offered is a Deckel FP2 universal milling machine in very good condition. The Deckel has excellent guides and is geometrically perfect. The long sliding head runs smoothly even at maximum speeds. The Deckel has very little backlash and all spindles can be moved easily. The machine has been completely disassembled and repainted. An oil change has been performed. Mechanically and electrically tested. The digital readout from K&C makes working easier and even more precise. Furthermore, you have a 1-year warranty on the new digital readout. Take the opportunity to inspect and test the Deckel on site under power.

Condition: like new (used), Year of construction: 2022, operating hours: 13,394 h, functionality: fully functional, Battery-powered high-performance sweeping/scrubbing machine Scrub and sweep in one pass: with the M17 battery-powered ride-on scrubber-dryer from Tennant® Without chemicals, but with ec-H2O™ technology and ionized water: This is how you clean floors economically and environmentally consciously with the Tennant® M17 ride-on scrubber-dryer. In addition to the environmentally friendly cleaning technology, you benefit from the ease of use of the cleaning machine - whether in use or during maintenance. Conveniently inspect suction feet, brushes and filters via tool-free access points. The double side sweeping brushes also enlarge the cleaning path and ensure highly productive sweeping and scrubbing. The Touch-n-Go™ control panel integrated in the steering wheel enables intuitive 1-hand operation. This allows the driver to keep both hands on the steering wheel and steer the industrial scrubber-drier safely. The chemical-free ec-H2O™ technology effectively removes dirt and leaves floors without chemical residue. This improves traction and prevents slipping accidents when cleaning with the Tennant® M17 ride-on scrubber-dryer. With 2,500 psi high-pressure cleaner for removing coarse dirt Area of application: Industry Voltage: 36 V Battery voltage: 36 V/per unit Charger: external Direction of travel: Reverse, forward Dirty water tank capacity: 346 l Working width: 1220 mm Brush speed: 500 rpm Brush motor power: 1125 W Automatic brush switch-off: yes Number of wheels: 3 Wheel width: 127 mm Operator cockpit: yes Suction foot width: 1245 mm Body color: green Width: 1370 mm Drive: Battery Brush material: Polypropylene (PP) Rim material: Iron Sweeping width side brushes: 785 mm Sweeping width without side brushes: 915 mm Sweeping capacity with 2 side brushes theoretical: 17560 m²/h Sweeper type: Ride-on sweeper Number of sweeping blades: 1 Power transmission: V-belt Steering wheel material: PU foam Length: 2850 mm Castors Material: Polypropylene (PP), nylon, polyester Dirt container volume: 45 l Side brushes foldable: yes UVP: 120.307 € Technical features Sweeping rollers + side brushes Height-adjustable: depending on brush pressure Practical area coverage: 10,310 sqm incl. Ech2o Climbing ability: transport (empty) 20%, transport gross weight 13%, working mode 11% Consumption: Runtime 2.9 hours Operation: Battery Battery type: Lead-acid battery Battery capacity: 775 Ah/per unit Driving speed: 5 - 9 km/h Noise level in dB(A): 75 dB(A) Fresh water tank capacity: 285 l Theoretical area coverage: 17560 m²/h Brush diameter: 230 mm Brush contact pressure: 250 kg Tire material: Polyurethane (PU) Non-marking wheels: yes Wheel diameter: 381 mm Suction lip material: Linatex Suction motor power: 1200 W Frame color: grey Height: 1480 mm Own weight: 2165 kg Number of batteries: 1 Weight without battery: 1515 kg Filter area: 51000 cm² Sweeping width with 2 side brushes: 1700 mm Sweeping capacity with 2 side brushes practical: 10310 m²/h Bwodpfx Abov Hqh Herow Sweeper filter cleaning: electric Sweeping principle: Direct sweeping system Body material: ABS plastic Running time: 6.5 h Number of swivel castors: 1 Reverse gear: yes Number of side brushes: 2 Seat material: Plastic Turning radius: 3003 mm Year of construction: 2022 Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: good (used), Year of construction: 2021, Ref. -No.: 10630 Manufacturer: MATEC Type: HV 700 Year of construction: 2021 Type of control: CNC-Steuerung Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany X-Travel: 2600 mm Y-Travel: 700 mm Z-Travel: 950 (horizontal) / 900 (vertikal) mm Swivel range: ± 105 ° Table speed range: max. 700 min/-1 Tool Taper: HSK-A63 Numbers Of Tools In Magazin: 50 Turning Speeds: 20 - 15.000 RPM Max. Torque: 195 (40 % ED) / 150 (100 % ED) Nm axes: 5 + Spindel Bodpfx Ae Ahmvmjbroww Drive Capacity - Spindle Motor: 41 (40 % ED) / 31 (100 % ED) kW Operating hours: Steuerung ein 19.381 / Maschine ein 7.220 / Programmlauf 2.285 H Internal cooling: 20 / 40 bar Holding torque: 5.000 Nm NC rotary table: 2.000 kg Tabletop C-axis: NC-Rundtisch Ø 750 mm, im Maschinentisch eingelassen Further information: - NC swivel head, infinitely variable ± 105°, torque drive, swivel radius 250 mm - Motor spindle HSK-A63, 20 - 15,000 rpm, 41 kW (40 % duty cycle) / 31 kW (100 % duty cycle) - NC rotary table Ø 750 mm recessed into the machine table (torque drive, max. 700 rpm, indexing accuracy ± 2.5", max. load 2,000 kg) - Direct measuring system X, Y, Z axes (absolute) - 50 tool pockets - Internal coolant supply 20 bar and 40 bar with paper band filter (450 l) - Hydraulic motor spindle clamping for turning operations - Partition wall for pendulum (dual-station) machining - Automatic safety doors - 3D touch probe with radio transmission - Renishaw RTS tool setting probe with radio transmission (2 pcs) - Software option KinematicsOpt incl. calibration ball with holder - Dynamics package for free-form surfaces - Collision monitoring SETAC-ADVANCED - Electronic handwheel (portable) - Full work area enclosure with roof - Bellows with steel slats - Chip conveyor, special version for high-volume machining - Mechanical air filter CMC 1500 (2 pcs) - Cooling unit for electrical control cabinet - Flushing gun - Central oil lubrication - LED work area lighting - Installation elements The machine can be viewed under power by arrangement.

Condition: excellent (used), BRANDT KDF 340 edge banding machine - used Manual, self-clamping pressure bridge adjustment, Feed via transport chain, Workpiece support is retractable, Diamond jointing cutter for both forward and reverse rotation, Glue reservoir located underneath, Standby function, Miter saw with 2 HF motors, Miter saw is swiveling, Edge trimming/radius chamfering unit, Milling tools with carbide insert blades, Radius pulling blade, Chip collection box for radius pulling blade, Air nozzle on the radius pulling blade ----- Technical data ----- Edge thickness, roll material: 0.4-3 mm, Edge thickness, strip material: 0.4-3 mm, Workpiece thickness: 50 mm, Min. workpiece length: 250 mm, Feed speed: 9 m/min., Distance workpiece support: 400 mm, Support plate Ø for edge material: 810 mm, Dimensions jointing cutter: 100x62x30 mm, Dimensions miter saw blade: 100x2.6x32 mm, Cutting blade for roll material up to: 3 mm, Warm-up time: 17 min., Power jointing cutter: 2x2.2 kW, Power miter saw: 2x0.18 kW, Power milling station: 2x0.27 kW, Power chamfering unit: 2x0.09 kW, Dust extraction nozzle Ø jointing cutter unit: 120 mm, Dust extraction nozzle Ø milling unit: 100 mm, Dust extraction nozzle Ø pulling blade unit: 100 mm, Compressed air connection: 6 bar, Bodpez Ea Dzjfx Abroww Overall length: 3,550 mm, Dimensions (L x W x H): 3,550 x 1,250 x 1,450 mm Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: excellent (used), HOLZ-HER Auriga 1308 XL edge banding machine - used PC control with screen, Touchscreen, Swiveling control panel, Program memory, Automatic adjustment of pressure beams, Feed via transport chain, Workpiece support can be extended, Diamond flush trimming cutter in both forward and reverse rotation, Strip magazine, Standby function, Glu Jet cartridge system, Cartridge system with sensing nozzle, Use of PUR adhesives possible, Gluing unit with driven roller, Pneumatic control of the gluing unit, Miter saw with 2 high-frequency motors, Miter saw pneumatically swiveling, Flush/radius milling unit, Motorized positioning control for milling unit, Milling tools with diamond coating, Air nozzle on the milling unit, Corner copying unit with diamond-coated cutter, Radius draw blade with motorized positioning, Air nozzle on the radius draw blade, Process-controlled surface draw blade, Air nozzle on the surface draw blade, Spray device for release agents, Spray device for cleaning agents, Edge trimming unit ----- Technical data ----- Edge thickness, roll material: 3 mm, Edge thickness, strip material: 5 mm, Workpiece thickness: 60 mm, Min. workpiece length: 160 mm, Feed speed: 10 m/min, Distance workpiece support: 480 mm, Support plate Ø for edge material: 800 mm, Cutting blade for roll material up to: 3 mm, Heating time: 3.5 min, Power of flush trimming cutter: 0.8/1.2 kW, Power of miter saw: 2x0.45 kW, Power of milling station: 2x0.65 kW, Power of corner copying: 0.3 kW, Power of edge trimming: 2x0.09 kW, Extraction port Ø flush trimming unit: 2x80 mm, Extraction port Ø miter saw: 2x70 mm, Extraction port Ø milling unit: 100 mm, Extraction port Ø draw blade unit: 120 mm, Compressed air connection: 6 bar, Overall length: 5,000 mm, Dimensions (LxWxH): 5,000x1,250x1,720 mm, Weight: 1,300 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - New heater - Cartridge system checked for leaks - Complete basic inspection - Complete basic cleaning Bwodpfxey T D N Aj Abrjw - Electrical system checked - Pneumatics checked - Ready for immediate use

Condition: used, Year of construction: 1978, machine/vehicle number: NBGMAN 2, Technical data: 1 Abus VS column slewing crane NL 1000 KG Payload at full radius 1000 KG / 1 ton payload Height: approx. 3.65m, UK boom: approx. 3.27m Projection: approx. 5m, hook height: approx. 2.75m Weight completely approx. 1000 kg including 1000KG Abus GM chain hoist (BJ2008) with floor control (2 lifting speeds) Bwjder Igtkspfx Abrow Connection to 400V 16A, swivel range 360° Test book is available Crane is dismantled and available immediately Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Very good condition, see pictures Shipping by courier or collection by appointment

Condition: excellent (used), functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 800 mm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, input voltage: 400 V, spindle nose: ISO 40, Tool grinding machine DECKEL S11 TECHNICAL CHARACTERISTICS: Grinding wheel diameter: 125 [mm] Workpiece spindle nose: ISO 40 Paper filtration unit: No Supply voltage: 400 [V] Total power required: 2 [kVA] Dimensions: 1100 x 800 x 1760 Bwsdpfx Aezz Hk Njbrjw Weight: 520 [Kg] EQUIPMENT INCLUDED: x1 universal index head - Part N°: 255X0X x10 dividing inserts for universal index head x1 tailstock with transverse adjustment - Part N°: 2621000 x1 tailstock with vertical adjustment - Part N°: 2624000 x1 swivel bracket assembly - Part N°: 2626000 x1 universal wheel dresser - Part N°: 2628000 x1 universal setting gauge - Part N°: 2570000 x1 spiral and relief grinding attachment - Part N°: 2580000 x1 relief grinding slide - Part N°: 2673000 x1 machine vice - Part N°: 2635000 x1 opto-electronic measuring unit with miscroscope - Part N°: 2650012 x2 digital readouts RSF-Elektronik x1 radius grinding attachment - Part N°: 2601X00 x1 LED lamp x3 feet pads Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps, and drills. Similar to brands such as Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Also see cylindrical or surface grinders, lathes, machining centers, and milling machines.

Condition: used, Weiss   Type: SWT 200/400-S   Weiss spray and splash water test cabinet   This cabinet is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum.   Features Glass door with wiper Pneumatic drive for the swivel nozzle Adjustable swivel angle Replaceable swivel nozzles Nozzle holder is swiveling and replaceable Adjustable water flow rate and measurement   Control of the test duration   Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen holder (total) 25 kg Spray radius 200 mm / 400 mm   Data for IP protection tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10°   Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm   Data for operation Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A   Weight: 375 kg   Bedpfx Aszii Akobrjww Important note: "The table shown in the photos is not included in the sale."   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Bwedpfx Abszil T Ejrow Type: SWT 200/400-S Weiss spray and splash water testing cabinet The cabinet is used to test the ingress of water into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system reduces water consumption to a minimum. Features: Glass door with wiper Pneumatic drive of the swivel nozzle Adjustable swivel angle Interchangeable swivel nozzles Nozzle holder can be swivelled and replaced Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress: Max. load with test specimen (evenly distributed over the area) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests: Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data: Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 KW Rated current 5.0 A Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, ASSEMBLY UNIT PROGRAMMABLE ASSEMBLY FENCE 0-5MM AUTOMATIC MAGAZINE FOR EDGE BANDING ROLLS AUTOMATIC MAGAZINE FOR SOLID EDGES CUT-OFF KNIFE FOR EDGE BANDING ROLLS PROGRAMMABLE PRESSURE ZONE WITH 1 PRE-PRESSURE AND 5 POST-PRESSURE ROLLERS GLUING UNIT, FLUSHABLE FOR PU ADHESIVE LINEAR CUTTING UNIT, SWIVELABLE FLUSH MILLING UNIT 2X1.9 KW RADIUS MILLING UNIT RADIUS SCRAPER Bjdpev I Sayofx Abreww COPY MILLING UNIT WITH 2 MOTORS SURFACE SCRAPERS TOUCHSCREEN CONTROL PANEL EDGE THICKNESS UP TO 20MM MACHINE LENGTH 7.90 M

Condition: good (used), Year of construction: 2021, functionality: fully functional, Matec HV 700, Year of manufacture 2021, Heidenhain TNC 640 control system, Travel range X/Y/Z 2600/700/950 horizontal, Travel range X/Y/Z 2600/700/950 vertical, 50-position tool changer, HSK 63 tool holder, Spindle speed up to 15,000 rpm, NC swivel milling head +/- 105°, Swivel radius 250 mm, NC rotary table Ø 750 mm, IKZ (internal cooling) 20 bar, Paper band filter, Direct measuring systems, Chip conveyor, Bedjy Thxzjpfx Abrjww Electr. handwheel, Dynamics package, Software Kinematics Option, Measuring probe, Partition, S1 approx. 2000 total spindle hours, S2 approx. 25 total spindle hours.

Condition: excellent (used), Edge Banding Machine HEBROCK K36 Airtronic -used- - PC control with display - Touchscreen - Swiveling control panel - Program memory - Automatic pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Motorized adjustable infeed fence - Diamond jointing cutter, both with and against feed direction - Quick heating gluepot - Gluepot change system - Suitable for PUR adhesives - Cross-cut saw with HF motor - Flush milling unit - Flush, radius, and chamfer milling unit - Pneumatic changeover of milling unit - Multi-milling tool - Multi-radius scraper blade - Chip collection box for radius scraper blade - Air jet nozzle at the radius scraper - Flat scraper blade - Air jet nozzle at the flat scraper - Exchangeable motor for corner rounding - Spray device for separator agent - Spray device for cleaning agent - Spray device for antistatic coolant - Spray device for lubricant - LED lighting in the machine area - Exchange gluepots - Zero Joint Airtronic System ----- Technical Data ----- - Edge thickness, coil material: 0.5-3 mm - Max. edge thickness for corner rounding: 3 mm - Workpiece thickness: 8-60 mm - Workpiece thickness for corner rounding: 45 mm - Min. workpiece length: 200 mm - Feed speed: 7-10 m/min - Support plate Ø for edge material: 850 mm - Guillotine for coil material up to: 3 mm - Jointing cutter power: 2x2.2 kW Bwedpfxoymyp Rj Abrew - Cross-cut saw power: 0.37 kW - Milling station power: 2x0.37 kW - Corner rounding unit power: 0.37 kW - Buffing unit power: 2x0.18 kW - Extraction port Ø jointing unit: 60 mm - Compressed air connection: 7 bar - Total length: 5,540 mm - Dimensions (LxWxH): 5,540x1,210x1,450 mm - Weight: 1,700 kg Quality Information: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Immediately ready for operation

Condition: like new (used), Year of construction: 2022, Semi-automatic tube bending machine for tubes up to 30 mm with extended bending clearance, especially for meander bending Standard equipment: • Operation via Siemens Touch Panel KTP 600 • Function keys and plain text display for operator guidance • Program memory internally for 100 programs with 20 data sets each • Bending axis electronically controlled • Automatic bending angle adjustment • Target/actual value display for bending angle • Control panel swiveling • Bending head freestanding • Tube clamping hydraulically, clamping pressure adjustable • Guide block adjustment hydraulically • Bending mandrel extension hydraulically • Machine can be used in a mobile manner • Extended bending clearance for bending radii up to R max = 200 mm 1 TUBOBEND 30 with tube feed length 1,500 mm Technical data: Tube range up to: 30.0 x 3.0 mm (E 235 with Rm = 2xD) Bending radius up to: 200 mm Control: electronic Effective bending angle (max.): 180° (+10° overbending) Switch-off accuracy: ± 0.1° Bending speed (max.): 45°/s Dimensions L/W/H: 2200 / 600 / 1100 mm Weight: approx. 500 kg Power: 1.5 kW Connection data: 400 V / 50 Hz / 3 phases Mains fuse: CEE 16 A Color: RAL 5015 blue Optional equipment 1 piece. Length stop device, length 1500 mm 1 piece. Early mandrel retraction to optimize arc quality • For use with ball mandrels • Mandrel is automatically retracted during the bending process • Adjustment up to 10° continuously programmable 1 piece. Automatic mandrel lubrication as a minimum quantity lubrication system Pneumatic dosing device HP-Microspray (compressed air connection required) 1 piece. Safety foot switch for clamping and bending function 1 piece. Adjustable bending speed Note/Remark: The tube is approximately 500 mm round at the beginning and end of the bend Bwedjzichajpfx Abrow (tube and tool = Ø 33.7 mm). The tube is only flattened into a flat oval tube in the spiral. The spiral only has one bend at each end. Bending of return bends is not possible. Since the tube is round, a pre-rotation can be performed to compensate for the slope. The position of the bend or the spiral must be determined using an external device.

Condition: used, Self-propelled telescopic boom lift 360° The JLG Toucan 1010 aerial work platform is equipped with a robust and easy-to-maintain electric motor. It allows 2 people to work at a height of 10.10 m or with a lateral reach of up to 3.12 m. Bwjdpfx Abopuxcberew High-quality components from renowned manufacturers guarantee a long service life and ensure that spare parts can be obtained quickly, even after several years. Its non-marking tires make it ideal for indoor use on sensitive flooring. It is therefore ideal for maintenance and assembly work at great heights. All functions can be controlled from the platform. Operation is possible in all positions, including at full extension. The superstructure can be rotated, so that lateral work areas can also be reached. Technical data: Brand: JLG Type: Toucan 1010 Max. working height: 10.10 m Max. platform height: 8.10 m Platform size (L x W x H): 0.9 x 0.7 x 1.1 m Platform load capacity: 200 kg Rotation range: 360° Platform swivel: -60°, +69° Max. lateral reach: 3.12 m Transport height: 1.99 m Transport width: 0.99 m Transport length: 2.89 m Own weight: 3300 kg Drive: electric/battery On-board 70-A Hawker battery charger Year of manufacture: 2009 Operating hours: 796.2 Other: Small turning radius; 20% climbing ability Battery Designation: Hawker Perfect Plus Type: 24V 4PZS 620 HP+ Nominal voltage: 24 volts Capacity: 620 Ah Weight: 553 kg Water refilling system You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Year of construction: 1982, center height: 125 mm, grinding length: 650 mm, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Working area Grinding diameter: 250 mm Grinding length: 650 mm Center height: 125 mm Distance between centers: 650 mm Grinding length in plunge grinding: 80 (100) mm Grinding depth in internal grinding: max. approx. 170 mm Grindable bore: max. 90 mm Workpiece weight: max. 80 kg Distance between workpiece spindle and tailstock center: 960 mm Spindles Internal grinding spindle speed: 9,500–50,000 rpm Grinding wheel diameter: max. 400 mm Spindle bore: 30 mm Workpiece tailstock can be swivelled: 90° Feed and table movement Workpiece table speed: 50–10,000 mm/min Feed rate: 240 mm/min Cooling Coolant consumption: 36 l/min Drive and power Spindle motor drive power: 6.25 kW Connected power: approx. 10 kW Total power consumption: 8.5 kW Machine data Machine weight: approx. 3.4 t Space required: approx. 3.9 × 2.5 × 1.85 m Control and drive Bjdpfxo Aa Ai Aj Abrsww Control: Studer Drive: electric / hydraulic Speed control: stepless EQUIPMENT Tailstock with fine adjustment and hydraulic retraction Workpiece tailstock with increased accuracy Table air lift Hydraulically foldable dressing device Radius dressing device Hydro-cyclone filter Automatic grinding wheel balancing device Automatic dressing cycle with speed compensation Internal grinding device

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: EN52, 1x mobile traveling crane pillar slewing crane (Nr Intern EN52) Type Vetter Mobilus 2.5-3.0 BJ 2001 Payload at full radius 250 kg / 0.25 tons Overall height: approx. 2.7m, projection: approx. 3m Hook height: approx. 2.05m, lower edge of boom 2.5m Column with counterweight incl. chain hoist, drag cable and accessories Manual operation with Demag chain hoist (older) Weight complete approx. 3500 kg Connection to 400V, swivel range 360° Very good condition, fully functional. Item location is 75053 Gondelsheim Only the crane system shown in the pictures is being sold Bwodpeh S E Ekefx Abrew See pictures Shipping by forwarding agent or pick-up

Condition: good (used), Year of construction: 2008, functionality: fully functional, SINGLE-SIDED EDGE BANDING MACHINE FOR PROCESSING MELAMINE, PVC & SOLID WOOD EDGES using EVA or PUR adhesives Total machine length 5,905 mm Workpiece thickness min./max. 6 - 60 mm, depending on edge thickness Edge band thickness 0.4 - 8 mm, depending on configuration Workpiece width min. 60 mm Workpiece length min. 180 mm Feed rate 18 m/min. without copying, 8 m/min. with copying Router unit with 2 motors at 2.0 kW each, 12,000 RPM pneumatically controlled, operating in both forward and reverse directions Bwedoz R Sw Tjpfx Abrow Roller platen 820 mm Glue application 1906M cartridge for cartridge magazines for EVA and PUR adhesives, with glue nozzle application unit Pressure zone with one main pressure roller and 2 follower rollers manually adjustable Trimming unit 1918 with 2 motors at 0.22 kW each, 9,000 RPM swiveling 0 - 10 degrees Multi-function router unit 1942 MOT 2 2 router motors at 0.6 kW each, 18,000 RPM, motor-adjustable swiveling 0 - 15 degrees Radius scraping unit 1929 up to max. radius R3 Copy router unit 1832 with 1 motor, 0.22 kW, 9,000 RPM Surface scraping blade 1964 Controlled from above and below Buffing unit 1940 2 motors at 0.12 kW each, swiveling 0 - 5 degrees Control: POWER-PC for efficient setup and changeover Windows-like user interface Simple program selection All information in plain text Extendable support rail approx. 500 mm