Used Auto Hydraulic Rotary Table Lifting Table For Robots for sale (87,166)

Condition: good (used), Translyft Rotary table scissor lift Kjdpjulz Epsfx Ag Njdu Translyft 3Tonne hydraulic scissor lift with rotary table, table diameter 1300mm, mounted on weigh cells with a scale, 3Ph

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder - conveyor belts - testing stations Ksdpfogd D U Eex Ag Nodu - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg All in as-new condition – the system was never used in series production.

Condition: used, Welding turntable - tilting turntable with hydraulic tilting motion Kdodopy Uz Depfx Ag Nju Welding positioner with faceplate PROTARC - ZAAR & Co. Model PF-DF 3000 Serial No. 3620 Year of manufacture: 1985 Load capacity: 3,000 kg Faceplate size: Ø 1100 mm (950 x 950 mm) Faceplate rotation speed: 0.05 - 1.25 rpm Minimum speed: 1 revolution in 10 minutes (tested) Maximum speed: 1.25 revolutions in 1 minute (tested) Table tilt range: 0 - 110° Table height vertical: 1,180 mm Table height horizontal: 940 mm Welding current transmission: 800 Amp. Table drive motor power: 2.2 kW Hydraulic motor power: 1.1 kW Power supply: 380 Volt, 50 Hz - Manual control switch for faceplate rotation direction and table speed - Foot switch for clockwise/counter-clockwise rotation and stop - Hydraulic tilting function with 2 hydraulic cylinders - Speed control via frequency inverter Required space (L x W x H): 1,700 x 1,400 x 1,180 mm Weight: 1,600 kg Very good condition

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Kdjdpsr I E Itofx Ag Nsu Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: good (used), Year of construction: 2002, machine/vehicle number: 094-02, Offer 24377 Technical data: - max. load capacity 75 kg - Face plate diameter 500 mm - Spindle shaft passage 100 mm - Face plate swivels 0 - 90 ° - Rotation electr. infinitely variable 1 - 10 rpm - Right + left rotation - E. - Foot switch - Welding current transmission approx. 350 A Kdedpfxsuac Ndo Ag Nou - Drive 230 V - Table height in horizontal position 870 mm - 3 jaw chucks 300 mm - Space requirement approx. W 750 x H 870 x D 500 mm - Weight approx. 150 kg

Condition: used, Orbital riveting machine Double riveting automatic with rotary indexing table DUNKES type DN 4 with SIEMENS control Kdjdpjdzp T Njfx Ag Neu Machine No. P 81 - 5458 Year of construction 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1400 rpm Mounting height tool - counter tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit adjustable in the machine frame towards rotary table - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with leadscrew, positioning via adjustable microswitch - Control system modernized and rotary table drive converted to servo in 2009 - New electrical control cabinet with Siemens Simatic Panel - year 2009 - Riveting time infinitely programmable - Riveting pressure continuously adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Weight approx. 2500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivets. The opposing riveting units rivet the pins simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair shops. Or for constructing a custom special-purpose machine.

Condition: good (used), Used rotary indexing table polishing machine Manufacturer: Hau Rotary indexing table with 6 work spindles and 3 polishing stations with oscillation and high-pressure guns, Kjdeqmfv Sspfx Ag Nodu 5.5 kW motors, gripper clamping system, switch cabinet

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Hydraulic Ksdpfx Asfvqmxjg Njdu

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m Kdjdpfotddw Ajx Ag Neu - total width: 1200 mm - height: 950 mm Hydraulic lift, lifting capacity around 1 ton.

Condition: used, Hydraulic self-centering steady rest, luenette, lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearings Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar steady rest base: 245 x 240 mm Type of construction: stationary - 3 pieces roller bearing Ø 35 mm Kedpfsiv Irlsx Ag Nedu - roller width 18 mm - hydraulic self centering dimension L x W x H: 350 x 250 x 550 mm dead weight: 65 kg good condition

Condition: ready for operation (used), Type: Ti 1800 Turning table 1800 x 2000 mm Cap on Table: 15.000 kg Kodpfxoxpgklj Ag Nodu 360° turnable cross displacement: 1250 mm 6 kW T-slot width: 28 mm T-slot distance: 160 mm Length: 3700 mm Width: 2100 mm Weight: 7600 kg Dia / Dimensions: 1800 x 2000 mm

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 92ML/109/11821, rotary table diameter: 1,220 mm, grinding height: 572 mm, total width: 4,394 mm, total length: 3,353 mm, overall weight: 13,700 kg, grinding wheel diameter: 711 mm, spindle speed (max.): 550 rpm, power: 35 kW (47.59 HP), table diameter: 1,219 mm, Lumsden 92 ML Vertical Spindle Rotary Surface Grinder , 48 Inch dia chuck, autosizing, table jog facility, Filtermist unit fitted with (2) extraction vents to rear of table guards, fitted with segmented wheel, serial number 92ML/109/11821. Machine tools manuals. Coolant filtration tank. Also with unused grinding stones segmented. Table Diameter 48″ / 1219mm, Segmental Wheel Dia. 28” / 711mm, Max. Height Capacity 22.5″ / 572mm, Spindle Speed 550rpm, Table Speed 6 & 18rpm, Auto Feed 0.004-0.04 ins/min – 0.1-1.0 mm/min, Spindle Motor 50HP / 35Kw, Floor Space 14′ x 11′ / 4394 x 3353mm, Approx. Net Weight 12T/12200Kg, Approx. Gross Weight 13.5T /13700Kg1220 Kjdpsxgq D Djfx Ag Nodu

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. turning speeds 0,6 - 6,0 U/min swivelling range 0 - 90 Grad bore 60,0 mm motor 230 Volt weight of the machine ca. 56 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft Kodpfx Agexabm Nj Nsdu - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: good (used), gebr. dividing head with a 3 jaw Röhm chuck dia 140 mm Kdodpfx Agjipic Io Nju

Condition: good (used), -VERY LITTLE USED - CONTINUOUS POSITIONING AUTOMATIC DIVIDING TABLE TABLE CHUCK DIAMETER: 450 MM Kodpfeuakraex Ag Nsdu SPINDLE BORE 200 MM 4-axis Divisor/ index rotary table with equpmaint Manufacturer HAAS

Condition: excellent (used), functionality: fully functional, Machine type: Universal rotary/tilting/swiveling table with dividing head Kodoxpwbuspfx Ag Nedu Manufacturer: Hermle, Deckel, Mikron Condition: very good Type of offer: used machine component Technical data: Note: Size: 670 x 395 mm Mounting size: 480 x 220 mm #### ATTENTION: SPECIAL PRICE DUE TO BUSINESS CLOSURE #### The component is in very good and immediately ready-for-use condition and can be inspected at our facility. We would be pleased if our offer is of interest to you. Subject to errors, changes, and intermediate sale.

Condition: ready for operation (used), BELANGRIJKSTE KENMERKEN: Tafelafmetingen: 3000 x 3500 mm Omgeschreven cirkel: 4300 mm Toelaatbare belasting (gelijkmatig verdeeld): 50 ton op 3000 x 3500 mm Totale tafelhoogte zonder cilinder: 1.250 m Aantal T-gleuven, breedte 36 H7: 13 T-sleufafstand: 250 mm Lengteverplaatsing: 2700 mm Longitudinale voedingen / bed: • positionering: 2 mm/min • werkend: 1 tot 3000 mm/min • snel: 3000 mm/min Circulaire feeds: • werkend: 0,0006 tot 0,6 tpm • snel (50-tons belasting): 0,6 tpm Nominaal koppel van longitudinale motor/bed: 9,4 mkg Nominaal koppel van cirkelmotor/tafel: 22 mkg Totaal geïnstalleerd vermogen: 50 kVA Kjdpfx Asxpggyeg Njdu Tafelgewicht (zonder elektrische apparatuur): 31.000 kg

Condition: used, Year of construction: 2008, table diameter 1100 mm table load 1,2 t Kdedpfxoxpi Ake Ag Nju swivelling range 0 - 135 Grad turning speeds 0,15 - 3,4 U/min table height adjustment von 780 bis 1560 mm max. torque on the faceplate 1300 Nm Dimensions (LxWxH) 2,8 x 1,6 x 1,6 m Welding turntable with new remote control • Self-locking gear system, no pre- or post-running under eccentric loads • Hydraulic height adjustment allows for virtually unlimited positioning • Frequency-controlled, infinitely variable speed of the rotary table

Condition: used, functionality: fully functional, workpiece weight (max.): 10,000 kg, overall weight: 4,600 kg, Table size: 1500 x 1500 mm. Max. workpiece weight: 10.000 kg. Country of origin: Sweden. Weight: 4600 kg. With variable turning speed. Kdsdpexphdysfx Ag Neu

Condition: excellent (used), Item description: Kedpfx Agexpu D He Njdu Tsudakoma RNA‑251R 4-axis / CNC rotary table ----- Item condition: Item comes from a company liquidation. Good used condition. Internal number: H23

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Ksdpfx Asgvkktog Nsdu Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: new, table diameter 900 mm table load 1 t swivelling range 0-135 Grad excentricity 200 mm table turning speeds 0,12 - 1,2 U/min Torque 2000 N/m total power requirement 0,75 kW dimensions of the machine ca. 1,5 x 1,020 x 0,9 m Ksdpfogvkiksx Ag Nsdu The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading and trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0-90 Grad table turning speeds 0,25 - 4 U/min Torque max. 360 N/m centre of gravity max. 150 mm total power requirement 0,4 kW Kjdpsgvkgtjfx Ag Nsdu The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table diameter 350 mm table load 0,1 t Ksdegvkk Nopfx Ag Nedu swivelling range 0-90 Grad table load horiz. 100 kg table load vert. 50 kg boring diameter 30 mm table turning speeds 0,5 - 5 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,5 x 0,5 x 0,5 m Welding table with hollow shaft D-DWP Tilt and turn tables with bore for turning, tilting and welding small workpieces from 100 kg. - Rotation and tilt axis - Infinitely variable speed - Compact model - Incl. Foot pedal

Condition: new, table diameter 690 mm table load 500 kg swivelling range 0 - 90 Grad table load horizontal 500 Kg table load vertikal 250 Kg boring diameter 100 mm table turning speeds 0,2 - 1,9 U/min total power requirement 0,37 kW The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model Kjdpoh Evt Ujfx Ag Nodu - Through hole in the turntable plate - CE marking