Used Automatic Dowel Inserting for sale (24,552)

Condition: used, Closes bags automatically in line Todpfx Aoz Nc Uwsbued The Leximat ASM 60 takes over the neck of filled bags with guide belts, twists it together and closes it, with no operator needed at the machine. That makes it a good fit behind a weigher or filler for bread, vegetables, fruit or other bagged goods. The machine is built entirely in stainless steel with a guard over the closing section and is operated from a touchscreen. Servo drives control the movements. We did not find a rating plate with the year. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Automatic bag closer (in line) Drive: Servo motors Controls: Touchscreen Construction: Stainless steel, with guard over the closing section

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 254002, type of input current: three-phase, overall weight: 130 kg, input voltage: 380 V, number of spindles: 8, input frequency: 50 Hz, Schleicher frame dowel hole drilling machine DBH 600, Drilling motor 1.5 kW, 380 Volt, 50 Hz, Drilling stroke 0 - 130 mm, Special drilling gear with 3 rows and 8 spindles, 1 clamping cylinder, Special stop system for Tedpjz Nkutofx Abued window frames and window mullions Weight approximately 130 kg as is, at the Seevetal location, excluding transport, EXW (Ex Works), subject to prior sale.

Condition: new, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: CF 10 T / 1, Our CF 10T bottom flap folder with filling station is an inexpensive entry-level model. Cardboard boxes with a length of 200 to 600 mm and a width of 150 to 480 mm are fixed for filling and pneumatically transferred to the next station. This simple model comes with a magazine and runs on normal household electricity. The CF 10T requires compressed air for operation. Todpoz E Il Tsfx Abujd Technical data: Dimensions 1400 x 950 x 700-860 mm Weight 90 kg Operating voltage 230 V / 600 W Compressed air 6 kgf/m3 Working height 700 - 800 mm Noise emission < 75 dB(A) Cardboard formats: Length 200 to 600 mm Width 150 to 480 mm Height 120 to 500 mm Roller conveyor is not included in the price, but can be purchased as an option. Can also be combined with one of our carton sealers on request.

Year of construction: 2026, condition: new, machine/vehicle number: KVK 3 Automatik_1, This automatic stretch wrapper with rotating turntable independently attaches the film to the pallet and cuts it after each wrapping cycle, unlike the semi-automatic KVK 3. Wrapping can conveniently be started by remote control—no need to get off the forklift or bend down to attach the film to the pallet. The machine is also equipped with a pre-stretch system for 250% elongation. This allows you to create up to 3.5 meters of wrapping film on the pallet from just 1 meter on the roll, greatly reducing your material consumption. Furthermore, the pre-stretch system applies minimal tension, so even lightweight goods remain stable and are not pulled from the turntable. At a weight of 700 kg, this model is very stable and engineered to handle loads of up to 2,000 kg. The KVK 3 Automatic features a 1,650 mm diameter turntable and, as standard, can wrap pallets up to 2,400 mm high. Todpfx Ajz E Imqjbujd Adjustable turntable and film carriage speeds, along with a potentiometer-controlled power stretch unit, allow you to perfectly adapt the automated wrapping process to your product. Automatic pallet detection (via photocell) is standard, as are adjustable top and bottom wraps. Program options include “up only” wrapping, “up & down” (cross-wrapping), and “waterproof” wrapping. Manual operation is also possible if required. If you need to relocate the machine, it can easily be lifted and moved using cut-outs designed for forklift tines. Options: In addition to a matching access ramp and a photocell for detecting dark goods or black film, the KVK 3 Automatic can also be optionally configured for wrapping heights up to 3,200 mm. This model is our clear recommendation if you are wrapping very lightweight goods or need to stretch-wrap more than approximately 30 pallets per day, with automatic film application and cutting. For further details, please see the technical data sheet attached as a PDF to this listing!

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. Todpfx Abjz E In Ieuod If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2026, condition: new, Our KVK 3 Slim Line is a semi-automatic stretch wrapper with turntable. It is equipped with a pre-stretch system for 250% stretching. Thanks to the pre-stretch system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal contact tension, so that even light packages are not pulled off the turntable. With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 3 Slim Line has a 1500 mm turntable and can wrap pallets up to 2250 mm high as standard. With adjustable speeds for the turntable and film carriage, as well as a potentiometer-controlled power stretch unit, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Tsdpoz E Iwisfx Abusd Programs for "up & down" (cross wrapping) and "rainproof" wrapping are available. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A suitable drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. This model is our clear recommendation if you wrap very light packages or wrap more than approx. 20 pallets a day and do not exceed a maximum pallet dimension of 800 x 1200 x 2250 mm. For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: new, Sommer automatic GS 6-5 assembly gripper JC/63158, unused, 100% fully functional, scope of delivery as per photos Todsz Ac D Uepfx Abusd

Condition: good (used), Year of construction: 2006, Berg & Schmid Xtech 410 CNC sawing machine Year of manufacture: 2006 Control: - CNC control, freely programmable Cutting range: Todpfxoz Ii T Dj Abusd - Round: 410 mm - Flat: 410 mm - Dimensions: approx. 3,500 × 2,000 × 2,200 mm - Working height: 730 mm Cutting speed: - 12–110 m/min Equipment: - Material feed via precision ball screw and linear guide - Hydraulic saw blade tensioning - Automatic double-sided saw blade free-travel device - Hydraulically driven chip conveyor - Clamping pressure adjustment for thin-walled tubes and profiles - Frequency-controlled saw drive, stepless - Infeed automation for the first cut - Blade tracking system Saw drive: - 5.5 kW

Condition: used, Year of construction: 2008, Manufacturer: COMEC Model: FUST-P-40 Year: 2008 Type: Semi-automatic filling line Containers: Drums, cans, off-centre-neck containers Max. container height: 500 mm Theoretical output: 200 x 20-litre containers per hour Dosing method: Weight-based, using a load cell Weighing range: 0.5 to 30 kg Accuracy: 10 g Calibration: Automatic Filling speeds: 2 (high flow rate / low flow rate within the same cycle) Filling spout: With anti-drip valve Conveying: Roller conveyor Capping: Manual placement, tightened using a hand-held pneumatic screwdriver Control: Control panel FAP-200/1 type feed unit - Filter (cylindrical coil): 500 microns - Pneumatic diaphragm pump - Flow rate: 2 to 4 m³/h - Transport trolley Todoz Ic Nfepfx Abued Documentation: Available Video: On request

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details cutting diameter 1000 mm saw band length 11100 mm cutting width 1100 mm total power requirement 20 kVA weight of the machine ca. 14 t dimensions of the machine ca. 5,4 x 3,2 x 3,9 m Additional information Cutting capacity: Ø 1000 mm, W 1100 x H 1000 mm min. Ø 400 mm, W 400 x 100 mm Face parallelism monitoring: optical display in mm Motor power – band drive: 11.0 kW Hydraulics: 3.7 kW Coolant: 0.36 kW Tjdpfx Ajz Iy Dyebuod Cleaning brush: 0.09 kW Band speed: 15 – 120 m/min (infinitely variable) Tank capacity: 115 l (hydraulics) 250 l (coolant) Saw band dimensions: 80 x 1.6 x 11,100 mm Space requirements: W 5366 x H 3215 x D 3863 mm Table height: 820 mm Weight: 14,000 kg – no foundation required Color: Red/black

Condition: good (used), Indexable insert drills, high-performance drills with indexable inserts, solid drills, end mills, shank cutters, milling cutters, indexable insert end mills, end mills with internal cooling, indexable insert end mills, boring heads -Manufacturer: Amec, adjustable indexable insert drill Revolution Drill with internal cooling -Type: V Maxx R44x35-40M -Shaft diameter: 40 mm -Drill diameter range (D1): 66.0 mm to 71.1 mm (adjustable via cartridges) -Drilling depth: 3.5 x D / Usable length approx. 253 mm -Reversible inserts: not included Todpfxoz Imzls Abujd -Dimensions: Ø 63 x 355 mm -Weight: 5.0 kg

Condition: new, Product driven flow divider Tjdpez Aph Hsfx Abued The filling flow divider can be used for several kind of products like meat, fish, pasta products, sauces and salads. Includes 1 nozzle per exit (round, square, triangular or rectangular) with a maximum outer diameter of 40 mm Product temperature up to ± 80 °C With universal connection With pneumatique knife 3 exits belt width 25 cm With support frame in height adjustable New

Year of construction: 2013, condition: ready for operation (used), Smipack BP800AS Monoblock automatic shrink wrapper with an inline infeed and a pneumatic sealing bar Maximum Output: Up to 12 packs per minute (ppm) Sealing Bar Size: 760 mm Product Maximum Height: 380 mm Maximum Pack Length: 1200 mm Maximum Film Reel Size: 750 x Ø 350 mm Max film width: 750 mm Advised Film: LDPE 20 – 100 µ Power Supply: 220–240 V / 380–415 V (3PH + PE / 3PH + N + PE, 50/60 Hz) Tedez Arh Ajpfx Abuod Installed Power: 17,180 W Air Pressure: 6 Bar Required Air: 13 Nl/p (normal liters per pack) Machine Net Weight: 625 kg Machine Dimensions: 2840 x 1410 mm (Height: 2105 – 2265 mm) Key Features FLXMOD® control system with a 7-inch full-colour touch screen and PLC.Memory Can store up to 50 different working cycles. Tunnel Conveyor: Built with heat-resistant glass fiber bars that support up to 30 kg and prevent rust. Infeed: Motorized upper and lower film unwinding with inverter-controlled adjustable speed.

Condition: used, machine/vehicle number: SH01-332, motor defect. 5000 EUR afte repair Todpfx Aboz Ri Insusd

Year of construction: 2016, condition: good (used), for sale: Complete Niverplast packaging line Year of manufacture: 2016 1. Manual infeed Niverplast 2. Depanner for baguettes from AUXPAMA 3. Metal detector 4. Reject system 5. Counter + speedbatcher Niverplast 6. Combiplast Niverplast 7. Boxloader Niverplast 8. Varioseal Niverplast 9. Metal detector 10. Pallet sealing device 11. Conveyor systems Niverplast Full documentation, layout, and specifications available. If you have any questions or comments, please feel free to contact me. Inspection on site is also possible. Todpfx Abjx Ari Heuod Dismantling and transport can be offered. Kind regards, Leo Holland

Condition: excellent (used), Full automatic Saw blade diameter 450 mm Cut range diameter 150 mm Tjdpfoy H Dmnjx Abued Cut off lenght 1000 mm Misc. accessories MARCELS MASCHINEN AG

Condition: used, Year of construction: 2005, cutting diameter 230 mm cutting speed 35 - 70 m/min cutting width 260 x 200 mm saw band length 2720 x 27 x 0,9 mm total power requirement 1,1 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,8 x 1,8 x 1,6 m Tsdpfx Asy N D Nbobujd

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Condition: well-maintained Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: from below & from the front - Swivel range: 0–90 degrees via handwheel - Pneumatic workpiece clamps: 3 pcs. - Passage dimensions: max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a wide range of stops (see images) Tjdpfx Abezk Nuieujd Availability: at short notice Storage location: Röllbach

Condition: good (used), Year of construction: 2011, functionality: fully functional, Mitsubishi controller, tapping spindle, loading magazine. Tedpfez Ryz Esx Abusd

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Tsdjwz Rifjpfx Abusd Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, Year of construction: 2010, bar material dia. 20 mm spindle passage 24 mm turning length 350 mm turning speeds 10.000 U/min Control CNC Siemens 840Di/Yaskawa c-axis 0,01° ° gripping station 20 mm speeds 10.000 U/min c-axis 0,01° ° rapid traverse 20 m/min turret (x-stations) 3 x 8 + (3x Y-Achse) total power requirement 5,5 kW weight of the machine ca. 4.850 t Todpfx Aozrh Ecsbujd dimensions of the machine ca. 3,2 x 1,75 x 1,9 +FMB m CNC sliding headstock automatic lathe Star ECAS 20T (12 axes) with 2 spindles, 3 turrets and barloader FMB.

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm saw band length: 2910 mm saw band width: 0,9 mm Tedpjy E Hynofx Abujd span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW machine weight approx.: 390 kg dimension machine approx.LxWxH: 1480 x 1700 x 2000 m Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off after completion of cut, return of the saw arm to starting position Torsion-resistant saw frame made of cast steel (multiple ribbed) Hydraulic short-stroke cylinder for vise Precisely ground carbide saw blade guides, adjustable Electric coolant pump Manual band tension with display, including electrical monitoring of saw band and cutting pressure Hydraulic vise (opening and closing) Chip removal brush, running synchronously Large, solid round support table, rotates during miter cuts with predefined cutting channel; miter adjustment manual, readable via scale Material stop 500 mm with scale Incl. saw blade with combi toothing 4/6 Roller conveyor sections: 2 pieces of 3 m and 1 piece of 2.55 m. *

Condition: used, Year of construction: 1995, Technical details: cutting diameter: 300 mm saw band length: 3200 mm saw band width: 25 mm dimensions of saw-band: 3660 x 25 x 0,9 mm electrical connection: 400/50 V / Hz. total power requirement: 1,1 kW work height max.: 650 mm machine weight approx.: 960 kg cutting speed: 15 - 95 m/min dimension machine approx.LxWxH: 2,2 x 2,0 x 1,3 m The Klaeger & Müller HBA 300 G CNC is a robust, hydraulically operated CNC horizontal band saw designed for precise and economical cutting of solid materials, tubes, and profiles made of steel, stainless steel, aluminum, and non-ferrous metals. Thanks to its CNC control system, it enables the automatic processing of production batches with high repeatability and productivity. The machine is equipped with a hydraulic material feed, automatic saw feed, and infinitely variable blade speed adjustment, allowing optimal machining of a wide variety of materials. Its rigid machine construction ensures smooth, low-vibration operation, excellent cutting quality, and extended saw blade life. In addition, the band saw is fitted with a coolant system that improves blade life and ensures clean, accurate cutting surfaces. Tjdpfx Ajzp Iu Sjbuod The Klaeger & Müller HBA 300 G CNC is particularly suitable for industrial applications in metal fabrication shops, steel construction, toolmaking, mechanical engineering, and serial production. *

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine approx.LxWxH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Todpfovc Aklox Abuod Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 weight of the machine ca.: 17,0 t total power requirement: 83,0 kW dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1:LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxBxH: 650x600x1700 mm dimensions electric cabinet: Nr.4: LxB.H: 1000x500x1350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - left 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: Tsdpfx Aeu Idxfebusd - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *