Used Automatic Flute Laminator for sale (21,153)

Year of construction: 2000, condition: used, Sold for parts, ADU card missing. Automatic tablet testing system - Laboratory measuring equipment - Tablet tool Enables testing of: Hardness Diameter Thickness Weight Precision balance Sartorius WZ64S Scale : 10 à 50 g Unit : mg / 0,5 mg / 0,1 mg adjustable Thickness Drive: stepper motor. Measuring principle: linear potentiometer. Unit of measurement: mm or inch. Tolerance: +/- 0.1 mm Hardness Drive: stepper motor. Godsx Rz I Depfx Abdjil Measurement: load cell (lmz) Measurement principle: dynamometric gauge Unit: N, Kp or Sc Diameter Drive: stepper motor. Measuring principle: stepper motor. Unit of measurement: mm or inch. Scale: 3 - 18 mm / 3 - 30 mm (manual) Tolerance: +/- 0.1 mm Tension : 100 / 240 V, 50Hz / 60 Hz The UTS is a universal, fully automated testing system developed for use in industry. This tool is the approved model of a series of test systems that have been tested over many years. It was developed in close collaboration with the pharmaceutical industry. The UTS 4.1 can be used to test round, oval, square and oblong tablets, as well as many special shapes. For delicate oblong tablets, the proven oblong centring system (OZB) can be integrated. All parts requiring cleaning can be removed quickly and easily without any tools. The test system can be supplemented with various options, such as a distributor and/or sample collector with a different number of stations. Use the UTS as a laboratory tester or an online control device connected to a tablet press. Sampling can be triggered either in the production machine or using the TTS11 software.

Condition: used, Year of construction: 2019, Technical details: bar material dia.: 38 mm turning length: 350 mm turning speeds: 7.000 / 7.000 U/min number of tools: 30 (3 x 10) driven tools: ja / yes control: FANUC 31i-B5 rapid traverse: 30 m/min total power requirement: 10,5 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,50 x 1,45 x 1,75 plus Lademagazin m work piece power: 4 kW toolpiece turning speed range: 5.700 1/min Accerories main spindle power 11 kW sub spindle power 7,5 kW CNC sliding headstock machine STAR ST 38, 3 turrets, 12 CNC Axis (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3, Fireextinguisher KRAFT und BAUER FB 703, partscatcher and conveyor belt (for long parts), LTA oilmist suction, chiller for oil, machining with oil as coolant, reading hours: approx. 14.500 hours "machine on", approx. 4.100 hours "machining" Giodpfx Aomu Rtuebdol *

Condition: used, Year of construction: 2009, operating hours: 6,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC530, spindle speed (max.): 36,000 rpm, GF Mirkon XSM600U X: 800 Y: 600 Z: 500 A: +30/-100 degrees C: 360 degrees continuous HSK50 spindle: max. 36,000 rpm, 25 kW HR410 handwheel 60-station tool changer Godpfewa R A Nex Abdjil Rotary table including 3R clamping system Chip conveyor Coolant system with 20 bar internal coolant supply Blum laser tool measurement M&H 3D probe Pallet automation with 21 pallets - the pallets are not included in the scope of delivery This machine is offered on a customer order basis!

Condition: used, Year of construction: 2004, functionality: fully functional, D&K Pegasus Semi Automated Laminator with format B2 Feeder. Removed from printshop sold Ex works. Sold Ex works Have powered up machine and rollers heat up and belts turn over. Collection Tadley near reading UK The D&K Pegasus is an entry-level thermal laminating machine designed for low- to medium-volume production. When equipped with an automatic feeder, it transitions from a manual-load system to a more efficient, automated workflow. Machine Specifications (D&K Pegasus) Format Size: Designed for prints up to B2 size. Maximum Sheet Size: Typically 540 x 740 mm (varies slightly by regional configuration). Operation: Features a belt-driven in-feed and an integral burster (sheet separator) for one-man operation. Applications: Ideal for thin, economic laminates and single-sided thermal lamination. Feeder Options The Pegasus can be fitted with several feeder types to increase productivity, often retrofittable as your volume grows. Accufeed A2 (Common Entry Feeder): Godpfsx Nrf Rex Abdoil Max Sheet Size: 450 x 650 mm. Min Sheet Size: 90 x 60 mm. Min Stock Weight: 70 gsm. Features: Low-cost, efficient, and comes with a supplied compressor. Accufeed 760 / 1020 (High-End Feeders): Accufeed 760: Max sheet size 685 x 760 mm. Accufeed 1020: Max sheet size 685 x 1020 mm. Technology: Uses an Accufeed Belt Stream System and integrated vacuum pump for accurate high-speed feeding. Key Benefits of the Full System One-Man Operation: The combination of an automatic suction feeder and the integral separator allows one operator to manage the entire lamination process. Productivity: Automatic feeding removes the bottleneck of manual hand-feeding, significantly increasing sheets-per-hour. Versatility: Suitable for various digital and offset stocks with adjustable temperature controls.

Condition: ready for operation (used), Year of construction: 1986, Immediately available from location: Fully automatic milling machine Busch Type NF 8/32 Year of manufacture: 1986 Groove width up to 32 mm Machining length up to 6100 mm Automatic material feed Automatic infeed Drive 5.5 kW Accessories: support tables Gjdpfx Asx Tqyuebdsil Tool holders, milling cutters Coolant system Digital readout Weight: 4 t Price: EUR 3,750.— plus VAT, ex location.

Condition: good (used), mileage: 925,500 km, power: 368 kW (500.34 HP), first registration: 05/2004, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, brakes: retarder, color: beige, driver cabin: sleeper cab, gearing type: semi-automatic, number of gears: 12, emission class: euro3, suspension: steel-air, Year of construction: 2004, Equipment: ABS, air conditioning, cruise control, differential lock, electric window regulation, parking heater, power mirror, retarder, seat heater, spoiler, traction control, = Further Options and Accessories = - 2 beds - Aluminum fuel tank - Heated mirrors - Comfort driver's seat - Roof spoiler - Differential lock - Differential lock (listed twice) - High beam - Speed limiter - Intarder - Multifunction steering wheel - Radio/CD player - Beacon lights - Sleeper cab - Sun visor - Auxiliary heating (parking heater) - ZF intarder = Notes = Gjdpox Rrryjfx Abdsil OLD SCHOOL, GOOD CONDITION SCANIA R500LA V8 4x2 TRACTOR UNIT, SEMI-AUTOMATIC GEARBOX, RETARDER, 2x FUEL TANKS & AIR CONDITIONING!! 500 HP, V8 ENGINE, EURO 3!! 12-SPEED SEMI-AUTOMATIC GEARBOX!! (WITH CLUTCH)!! RETARDER!! 700+700 LITER DIESEL TANKS!! FULL SPOILER KIT ON CABIN!! SUN VISOR!! FLASHING LIGHTS!! ETC.!! GOOD CONDITION - TRUCK IS IN GOOD WORKING / DRIVING ORDER, READY FOR HEAVY DUTY JOBS!! MORE SCANIA 4x2 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; TRANSIT REGISTRATION, SHIPMENT, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! YOU CAN ALSO WATCH OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! () ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 8 Engine displacement: 15,607 cc Transmission Transmission: GRS900R (SEMI AUTOMATIC), 12 speeds, semi-automatic gearbox Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Max. axle load: 7,500 kg; Steered; Left tire tread: 50%; Right tire tread: 50%; Suspension: leaf spring Rear axle: Tire size: 315/80R22.5; Twin tires; Differential lock; Max. axle load: 11,500 kg; Left inner tire tread: 60%; Left outer tire tread: 60%; Right inner tire tread: 60%; Right outer tire tread: 60%; Reduction: single reduction; Suspension: air suspension Weights Curb weight: 8,430 kg Payload: 10,570 kg Gross vehicle weight: 19,000 kg Functional Cargo space volume: 1,400 l Body manufacturer: SCANIA Loading surface height: 112 cm Condition Technical condition: good Optical condition: very good Further Information For further information, please contact the Sales Department or Erik Engel.

Condition: excellent (used), Year of construction: 2012, Ref:11026 . 2012 Aster 220 SA Automatic Book Sewer The 220 is the top model in the Aster range. The fastest and most automated sewing machine suitable for both short & long runs. Equipped with: Aster 220 SA Automatic book sewer with; 4 plus 4 upper and lower openings Suction and gripper action Computer programme - Siemens PLC with icon display and job memory capability Moveable touch-screen colour monitor Auto set-up with servo motors Programming of lap opening & suckers D/C drive unit Capable of mixed suction & lap signature feeding Standard or staggered stitching - adjustable Thread cutting device Meccanotecnica 'Plus' Stacker Delivery conveyor Specification: Book sizes, Max: 510 x 320 x 100 mm Giedoxx Ut Tjpfx Abdsl Min: 150 x 75 x 5 mm Stitch length 19 mm Number of stitches 11 Mechanical speed 220 cycles/min.

Condition: used, Year of construction: 2000, pressure 130 t no. of strokes 50-250 Hub/min sheet width 250mm mm stroke 8-120 mm ram - range of adjustment 100 mm Giedpfx Aboxh Sypedel table surface area 1600x800 mm ram surface 1600x800 mm hole in the table 1100x250 mm table height 1000 mm 370 mm weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 3900x2500x3800 mm

Condition: used, mileage: 32,891 km, power: 110 kW (149.56 HP), first registration: 12/2022, fuel type: diesel, tire size: 215/65 R16C, axle configuration: 4x2, wheelbase: 3,150 mm, fuel: diesel, color: other, gearing type: automatic, emission class: euro6, suspension: steel, total length: 5,200 mm, total width: 1,950 mm, total height: 1,970 mm, Year of construction: 2022, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, trailer coupling, = Additional options and accessories = - Spare key - Speed limiter - Reversing camera - Stability control - Standard air conditioning - Alternating current - Central lubrication = Further information = Tyre size: 215/65 R16C Gijdpfx Absx Rl Diedol Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Steered; tyre tread left: 5 mm; tyre tread right: 5 mm Rear axle: tyre tread left: 8 mm; tyre tread right: 7 mm Unladen weight: 1,887 kg Payload: 913 kg GVW: 2,800 kg Damage: none

Condition: excellent (used), Year of construction: 2018, Control Fanuc 32I-B, Giodpfx Aew Rct Hjbdsl bar capacity 32mm, maximum cutting diameter 32mm, maximum cutting length 310mm, maximum drilling diameter 13mm, maximum tapping capacity M12, milling speed 5,000rpm, spindle speed 7,000rpm, Sub spindle C axis 0.001 degree, FMB Turbo 3-36/3200 barfeed, number of controlled axis Z, ZB, X, XB, C1, C2, Y. swarf conveyor,

Condition: ready for operation (used), Year of construction: 1977, Available immediately, ex location: Double-column automatic press Haulick und Ross Type RVD 100 Year of manufacture: 1977 Pressing force: 100 tons Table: 880 x 800 mm Table opening: 470 x 140 mm Column clearance: 900 mm Ram stroke: 45 mm Ram adjustment: 0 – 80 mm Stroke rate: 50 – 300 strokes/min Installation height: 340 mm Motor power: 15 kW Feed unit Weight: 9 tons Price: EUR 2,750 plus VAT, ex location Gedpfx Abex Tqxqedsil

Condition: used, Year of construction: 2007, Behringer HBM 540 A automatic band saw year of construction 2007 Gedpjwi Ii Sefx Abdeil Working area flat 630x540 Round 540mm Motor power saw drive 11KW Cutting speed 20-200m/min 2x infeed roller conveyor driven 6200mm width 1200mm each with cross feed Discharge roller conveyor 5030mm driven chip conveyor The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals

Condition: new, Fastech horizontal bandsaw semi-automatic BMSY 360 DGH ECO Round cutting range mm: 360 Flat cutting range mm: 510 x 360 Square Cutting range mm: 360 +30 ° Round cutting range mm: 360 Godpfx Abjg Ekttodoil +30 ° Flat Cutting range mm: 440 x 360 +30 ° Square Cutting range mm: 360 +45 ° Round Cutting range mm: 360 +45 ° Flat cutting range mm: 390 x 360 +45 ° Square cutting area mm: 360 +60 ° Round cutting range mm: 200 +60 ° Flat cutting range mm: 200 x 360 +60 ° Square cutting range mm: 200 -30 ° Round cutting range mm: 360 -30 ° Flat cutting range mm: 440 x 360 -30 ° Square cutting range mm: 360 -45 ° Round cutting range mm: 360 -45 ° Flat cutting range mm: 390 x 360 -45 ° Square cutting area mm: 360 -60 ° Round cutting range mm: 260 -60 ° Flat cutting range mm: 260 x 360 -60 ° Square cutting range mm: 260 Engine power main drive kW 3 Hydraulic pump power kW 0,37 Engine power coolant pump kW 0,12 Band speed, infinitely variable: m/min.20 - 100 Saw band dimensions mm: 4800x34x1,1 Working surface height mm: 860 weight kg: 1450 length / depth / height mm: 2650 / 1210 / 1870 Double mitre saw Infinitely variable belt speed hydraulic vice High performance gearbox Hydromechanical saw band tensioning Saw band brush Digital display for mitre angle

Year of construction: 2003, condition: used, functionality: fully functional, D&K Acculam 2760 Laminator with Feeder, Exit tray and Transformer. Recently removed from a printshop. Machine has been in full working order and producing live jobs. Machine is sold Ex works. No cutting unit is included. Machine is located in my warehouse in Tadley/Reading UK. Video in production on request. The D&K System 2760 (often referred to as the Acculam series) is a fully automated one-sided lamination system designed for high-volume, short-run digital and offset printing. It typically includes an automatic feeder, a laminator with curl management, and a flying knife separator. Technical Specifications Max Lamination Speed Up to 60 fpm (18 meters per minute) Max Sheet Size 26" x 30" (standard) or up to 28" x 40" (B1 version) Min Sheet Size 8.5" x 11" (21.6 cm x 27.9 cm) Paper Weight Range 80 lb. Text to 18 pt. Board (approx. 115–350+ gsm) Temperature Range 180°F – 300°F (70°C – 140°C) Gisdpfx Abox Nawnedjl Warm-up Time Approximately 20 minutes Electrical Requirements 230 Volt, 30 Amp, Single Phase Air Requirements 6 cfm (some models may require up to 8 cfm) System Dimensions 5' W x 14' L x 5' H Key Features Feeding System: Utilizes a state-of-the-art automatic suction feeder and belt table to ensure accurate sheet registration. Adhesion Technology: The System 2760 DN variant features two sets of heated nip rollers specifically for better adhesion to difficult digital prints like Xerox iGen or HP Indigo. Curl Management: A patented decurling system ensures sheets lay flat even when using thin paper or thick films like polyester and nylon. Versatility: Supports both thermal (heat) and pressure-sensitive (cold) lamination with optional release liner take-up for PSA products.

Condition: used, machine/vehicle number: 008392, Max. panel width: 4500 mm Max. panel length: 2200 mm Gijdex Swb Nopfx Abdsl Main saw blade projection: 127 mm No of Grippers: 7 Panel Rotation Station: yes Thin sheet loading: yes

Condition: not inspected (used), Year of construction: 2021, functionality: unexamined, Star SR-32J sliding head CNC lathes - 4 available - see descriptions below Giodjwxb Adepfx Abdsl Star SR-32J sliding head CNC lathe Serial no: 3174 (09/2015) with Fanuc Series 32i-Model B control, Filtermist extraction, swarf conveyor and chip hopper Hydrajet GP20-2000 high pressure coolant system Serial no: 698 (07/2016) FMB Turbo 3-36/4200/A bar feed Serial no: 48-260915 / R:686664 (2008) Star SR-32J II type B sliding head CNC lathe Serial no: 0700 (12/2020) with Fanuc Series 32i-Model B CNC control, Filtermist extraction Hydrajet UB20-2000-6TF high pressure coolant system Serial no: 1461 (2021) FMB Turbo 3-36/4200/A bar feed Serial no: 61-264515 / R:1824023 (2021) Star SR-32J II type A sliding head CNC lathe Serial no: 0714 (02/2021) with Fanuc Series 32i-Model B CNC control, Filtermist extraction, swarf conveyor and chip hopper Hydrajet UB20-2000-5F high pressure coolant system Serial no: 1490 (04/2021) FMB Turbo 3-36/4200/A bar feed Serial no: 61-264572 / R:1843360 (2021)

Condition: good (used), mileage: 506,164 km, power: 132 kW (179.47 HP), first registration: 11/2012, fuel type: diesel, tire size: 215/75R17,5, axle configuration: 4x2, wheelbase: 4,200 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, suspension: steel-air, total length: 8,050 mm, total width: 2,550 mm, total height: 3,670 mm, loading space length: 6,120 mm, loading space width: 2,480 mm, loading space height: 2,580 mm, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, trailer coupling, = Additional Options and Accessories = - Digital tachograph - Recording device (control unit) - Fixed - Hydraulic system - Short cab = Remarks = Number of axles: 2, configuration: 4x2, kerb weight: 5,035 kg, gross weight: 7,490 kg, total tank capacity: 180 liters, trailer coupling, kingpin diameter: 40 DIN, fifth wheel: fixed, suspension type: air suspension, cab type: short cab, cruise control, recording device (control unit), digital tachograph, air conditioning, electric windows, electric mirrors, radio/cassette, color: white, heated mirrors, lighting type: halogen lamp, seat heating, engine power: 132 kW (177 hp), fuel: diesel, Euro: 5, transmission type: AS-Tronic, gearbox make: ZF, gears: 6, power steering, ABS, hydraulic system, starter battery, central locking, seat configuration: 1+1, seat covers: fabric, seat adjustment: manual, spare wheel, spare wheel tread: 13% = Further Information = Transmission Gearbox: ZF, 6 gears, automatic Axle Configuration Tyre size: 215/75R17.5 Brakes: disc brakes Axle 1: steered; left tyre tread: 6 mm; right tyre tread: 7 mm; suspension: leaf spring Axle 2: twin tyres; left inner tread: 9 mm; left outer tread: 11 mm; right inner tread: 10 mm; right outer tread: 10 mm; suspension: air suspension Weights Unladen weight: 5,035 kg Payload: 2,455 kg Gross vehicle weight: 7,490 kg Functional Loading platform height: 96 cm Condition Technical condition: good Visual condition: good Damage: none Gjdpfsxr Ub Rsx Abdeil Number of keys: 2 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European brands, years of manufacture, and price classes. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Fair prices • Professional integrity • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration quickly arranged • Expert technical services • The assurance of 'recognizable quality' • And more… Please visit our website for special offers and our complete stock: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an enquiry via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 2007, cutting width (max.): 1,060 mm, cutting height (max.): 1,060 mm, Bandsaw Kasto HBA 10×12 Year 2007 Cutting ranges: Cutting area round 1,060 mm Cutting area square 1,060 x 1,060 mm Gsdpfx Abewk D Efjdoil Cutting area flat 1,060 x 1,260 mm Clamping range 300 - 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest cut-off length 10 mm Minimum offcut length single cut 20 mm Minimum offcut length in automatic mode 100 mm Maximum table load 50 tons Table travel 6100 mm Total drive power 20 kW Saw motor 11 kW Infinitely variable cutting speed at 50 and 60 Hz 12 - 90 m/min Automatic feed length single 2,100 mm Clamping force of machine vice 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material clamping: hydraulic Saw blade guide: carbide, replaceable Saw blade tensioning: hydraulic Saw blade cleaning: with easily replaceable brush, motor-driven The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: excellent (used), Opportunity! Previously owned by the German government, we are pleased to offer this top-quality liquid handling system, type "Genesis RSP 100/8," from the global brand TECAN, as a complete system with all accessories, from a single source. The fully automated Genesis RSP 100/8 pipetting robot system is one of the most reliable systems available today and is an indispensable part of any laboratory. All components are in excellent condition; the system has never been used industrially and has seen very little use. All devices are in excellent optical and technical condition and show no significant damage – see pictures. The extensive range of accessories provides you with a complete system that you can start using immediately. Gjdpfowltr Rox Abdeil Scope of delivery: - TECAN RSP 100/8 Liquid Handling System - Eppendorf Gradient PCR Mastercycler - Olympus DP10 Digital Microframe Camera for Droplet Size Monitoring - GeSim 1.2 Nanoplotter with Housing - Diluter 4 - NPC 8 Software - Gemini v4.2 Software - Cables, manual, power supplies, and small parts - Various pipette tips in various sizes (2 boxes containing approximately 10,000 pieces) Dimensions: (D) x (H) x (W): 78 x 94 x 106 cm Weight: approximately 145 kg Shipment will be made within three business days after receipt of payment by insured freight forwarder. You can also pick up the device from us during regular business hours. The total weight of the system, including accessories and two pallets, is approximately 250 kg! This sale is exclusively for businesses; you will, of course, receive a VAT invoice. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold excluding any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health. Please feel free to contact us at the address provided for any inquiries regarding prices or technical details.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Pratika 55 Smart TSG The Minipack Pratika 55 Smart TSG is a fully automatic packaging machine with integrated shrink tunnel and modern PLC control system. – Fully automatic packaging machine with integrated shrink tunnel – Electric servo motor for sealing bars – Electric, non-pneumatic feeding system – Power supply: 400 V, 50/60 Hz, 3-phase (inverter) – Maximum installed power: 9 kW (400 V) – Maximum current consumption: 15 A (400 V) – Hourly output: 0–1,200 packs/h – Maximum product dimensions: 400 × 420 × 120 mm – Maximum film roll size: Ø 250 × 600 mm – Conveyor belt height: 870 mm (standard) – Machine dimensions (door open): 2,240 × 1,625 × 2,372 mm – Machine dimensions (door closed): 1,325 × 1,625 × 2,372 mm – Machine packing dimensions: 1,440 × 1,990 × 2,950 mm – Weight (net/gross): 730 / 865 kg Godpfjx Ttkpox Abdeil – Machine color: RAL 7035

Condition: new, Year of construction: 2023, REF: MM5675 Vigo semi-automatic T-capping machine. Suitable for applying T-caps to 70cl and 100cl bottles.  Model - PG2010/TV SEMIAUTOMAT T-CAPPER.  Date of manufacture - 2023. Electric supply - 220 V / 50 hz / 1 phase. Godpfsr I Ddkjx Abdoil Supplied with manual, 1 x T stop corker adjustments for 2 x cap types (miniature and normal), 1 x Head and down channel for different “T” caps sizes and castors.  Purchased brand new in 2023 but never used.

Condition: used, Year of construction: 1991, table - swivable ja Grad Giodpfx Abox Ni E Uodsl weight of the machine ca. 200 kg with welding equipment

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, MINIPACK Modular 70 Gisdpfx Ajx Tr Umjbdsl The Minipack Modular 70 is a powerful semi-automatic packaging machine featuring an L-bar sealing system for producing shrink film packages. Thanks to its larger sealing bar, it is also suitable for packaging larger products. – Semi-automatic packaging machine with L-bar sealing – Electronically controlled sealing system – Manual or automatic operation modes – Simple and intuitive controls – Output up to 900 units per hour – Usable sealing bar dimensions: 840 × 600 mm – Max. film roll width: 800 mm – Max. film roll diameter: 300 mm – Working table height: 930 mm – Machine dimensions (closed): 2,070 × 960 × 1,220 mm – Machine dimensions (open): 2,070 × 960 × 1,510 mm – Net weight: 243 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Modular 50S The Minipack Modular 50S is a compact, well-proven semi-automatic packaging machine with L-shaped sealing for producing shrink wrap packaging. The machine is universally applicable and easy to operate. – Semi-automatic packaging machine with L-shaped sealing – Electronically controlled sealing system – Manual or automatic operation mode – Simple and intuitive operation – Output up to 900 units per hour Gjdpjx Tr Tcefx Abdjil – Usable sealing bar dimensions: 540 × 400 mm – Max. film roll width: 600 mm – Max. film roll diameter: 250 mm – Working table height: 930 mm – Machine dimensions (closed): 1,565 × 750 × 1,100 mm – Machine dimensions (open): 1,565 × 750 × 1,400 mm – Machine weight: 151 kg (net) – Machine on wheels

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 2,893 mm, total height: 1,585 mm, total width: 1,240 mm, warranty duration: 12 months, type of input current: AC, product height (max.): 240 mm, product length (max.): 600 mm, product width (max.): 400 mm, input voltage: 230 V, Pratika 56 MPE X2 The Minipack Pratika MPE X2 is a proven, fully automatic machine for manufacturing shrink film packaging. This machine is highly versatile and user-friendly, making it suitable for a wide range of products in both food and non-food sectors. • Fully automatic L-sealer with brushless motors and modern PLC control with a 7” color display • Simple operation • Storage of up to 128 recipes including product images • Quick product changeovers • Up to 3,600 units per hour • Convenient and fast product changeovers • Max. product dimensions: 600 x 400 x 240 mm • Machine dimensions: 2,480 x 1,240 x 1,675 mm • No compressed air required! Giedpfx Aox Tp H Tjbdel • Doors on both sides of the machine • Machine interior equipped with lighting