Used Automatic Panell Saw for sale (32,408)

Condition: used, Year of construction: 2024, machine/vehicle number: 0-341-87-0182, operating hours: 1,354 h, total length: 6,080 mm, total width: 4,950 mm, total height: 1,940 mm, Used panel saw, available for inspection while in operation. ▪️Labeling software ▪️Manual label printer ▪️Stress-free cutting/ripping program (cutting cycles, stress elimination, reduced waste) ▪️tapio ready Transportation is the responsibility of the buyer. Iedpszu Nytefx Aaxotk

Condition: used, Year of construction: 2023, Cutting area: 5600x5600 mm 1x Gabbiani G 3 130 (56) - High-performance panel dividing saw 1x Compact label printer 1x "eye-M EVO" control console 1x Human-Machine Interface (HMI) software MAESTRO ACTIVE 1x Maestro pattern 1x High-performance, fixed air cushion table with guide, 2500x600 mm, with infeed rollers 3x High-performance, mobile air cushion table - 2500x600 mm, with infeed rollers 1x Double, lateral, automatic aligner with motor drive 1x Foot switch for START/STOP of the working cycle 1x Setup for grooving with height adjustment of the saw blade via the control system 1x "Autosetting" device on the saw carriage for cutting length/width 1x Main saw blade motor 25 HP (18 kW) 50 Hz with star-delta starter 1x Quick clamping of the saw blades with mechanical flanges "AKE" 1x Selective collet chuck (area 0 - 1600 mm) 3x Additional double collet chuck 4x Additional collet chuck with single finger 1x Compact office label printer 1x Cut editor 1x Maestro optiwise - Advanced - No. 1 license 1x Maestro connect: Service agreement for 1 year (including "plug&play" gateway kit) 1x Base 1x MACHINE LANGUAGE: German Iedpfx Aexlvkteaxotk 1x PC LANGUAGE: German 1x SPEC01 Special version 01 1x European safety regulations (CE marking) including 123 hours of on-site commissioning (within Germany) (daily working hours are 8 hours including travel time). including 1 day of online training MAESTRO OPTIWISE PRO (as needed) including MAESTRO CONNECT 1 year including MAESTRO PATTERN IMPORT (255€ free)!!! FULL MANUFACTURER'S WARRANTY IN THE FIRST YEAR !!! Storage location:

Condition: like new (used), functionality: fully functional, power: 11 kW (14.96 HP), cutting height (max.): 115 mm, cutting width (max.): 4,200 mm, height adjustment type: electric, SCHEER PA 7004 – 4200 x 4681 mm LIKE-NEW panel dividing system DIRECTLY FROM THE MANUFACTURER with lifting table, optimization software, and new PC control LIKE-NEW 1 year warranty For sale is a fully overhauled SCHEER PA 7004 panel dividing system with a processing capacity of 4200 x 4681 mm. The system has been technically and visually refurbished and features a new industrial PC with a Linux operating system, network connectivity, and remote maintenance capabilities. Ideally suited for industrial carpentry workshops, furniture manufacturers, interior design companies, and panel processing companies that value precision, performance, and high availability. Equipment and highlights: New PC control New industrial PC with Linux operating system Network connectivity (LAN/WLAN) TeamViewer remote maintenance USB interfaces Graphical cutting plan display Multilingual user interface 15" flat screen in the swiveling control panel Optionally available with label printing system Panel saw FM 22-4200 Hardened guides Servo-driven saw unit Feed speed 2–70 m/min Return speed up to 100 m/min Automatic lowering of the saw unit Main saw 11 kW Itjdoza Efwjpfx Aaxsk Scoring saw 2.2 kW Automatic cut height adjustment Cut-off device Lamella protection curtain Safety guard locking Workpiece clamping protection Technical data: Cutting length: 4,200 mm Fence depth: 4,681 mm Cutting height: 115 mm Fully automatic angle pressing device For precise cross cuts with automatic workpiece fixing. Material feed table HP 5100 Servo-driven material pusher 2 top guides Rack and pinion guide 7 retractable clamping fingers 3 controlled extraction bolts 11 triple roller tracks Feed speed 25 m/min Return speed 50 m/min Four-spindle lifting table TE 5085 Table length 4,200 mm Table depth 2,800 mm Lifting height 640 mm Lowering height 280 mm Motor-driven roller tracks Right and left operation Recesses for rear loading Automatic alignment systems Longitudinal alignment WP 5038 Double execution Two motor-driven alignment fingers For panel lengths up to 4,800 mm Cross alignment WP 5037 3 pneumatic stop and alignment cylinders Integrated braking system Workpiece support Angle stop table HP 5094 2 workpiece support tables HP 5095 Air cushion system LK 5161 Radial fan and piping system included Optimization software OPTIMIN The system features the proven OPTIMIN cutting plan optimization. Bills of materials are entered directly into the machine, automatically optimized, and immediately made available for processing. Advantages: Material savings Shorter processing times Optimal utilization of the system Easy operation Additional equipment: Powered roller track on the right Set of carbide saw blades Operating manual Hardware key for optimization software Conclusion A powerful and extensively equipped panel dividing system with modernized control technology, automatic alignment, lifting table, and optimization software. The machine has been completely overhauled and is ready for immediate use. ✓ LIKE-NEW ✓ New industrial PC with Linux ✓ Network compatible & TeamViewer ✓ Optimization software OPTIMIN ✓ 1 year warranty

Condition: good (used), Code: 0360 Itsdpfxoy Du Nzj Aaxsk Brand: GMC - ITALY Model: KGS 400/E - CE Standard Manual vertical panel saw with scoring unit for cutting panels, furniture, customer made furniture, kitchens, plastics, composite materials, aluminium and various – CE Standard Technical specifications: Cutting length 3200 mm Cutting height 1900 mm Cutting thickness 50 mm Blade diameter 250 mm Hole 20 Motor 4 Hp Scoring unit for chip-free cutting - Blade diameter mm 110 Hole 20 Circular saw shaft speed 4800 rpm Scoring saw shaft speed 7000 rpm Retractable tilting intermediate support, half-length Automatic mechanical moving frame Double lower and upper measuring index for horizontal cuts Overall dimensions of assembled machine mm 5100 x 1100 x 2800 h Overall dimensions for transport: Frame mm 5100 x 460 x 2250 h + Beam mm 2900 x 850 x 850 h Weight kg 450

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table Itodpfxjv Nhg So Aaxsk for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -

Condition: like new (used), Year of construction: 2003, I sell the panel beam saw SCM Sigma 85KC. Year 2003. Cutting size 3300x3200mm. Cutting height 85mm. Main motor 7,5kW Scoring motor 1,1kW Total power 10kW Total area covered W.5400mm x D.7000mm 5 pcs. gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. WinCut optimising software included. Itodpfxozvhy Io Aaxsk Very good condition. Available immediately.

Condition: used, Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, feed length X-axis: 24,000 mm, feed length Y-axis: 450 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 400 m/min, total length: 28,000 mm, drilling capacity: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, type of input current: three-phase, control cabinet width: 1,620 mm, control cabinet length: 450 mm, total height: 3,400 mm, total width: 2,600 mm, control cabinet height: 2,200 mm, overall weight: 11,200 kg, workpiece weight (max.): 8,000 kg, positioning accuracy: 1 mm, spindle speed (min.): 200 rpm, rotational speed (max.): 4,000 rpm, spindle speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, travel distance X-axis: 600 mm, table width: 1,000 mm, drill diameter: 40 mm, compressed air connection: 8 bar, roll diameter: 108 mm, table length: 1,000 mm, table height: 710 mm, power: 21 kW (28.55 HP), Equipment: rotational speed infinitely variable, Complete automatic drill-saw street for profiles APS Europe Profile steel drilling machine RDR-1036 and Band saw RS-1300 Increase your productivity with this complete automatic drill-saw street for profiles. Itjdpfxjtnf Iyo Aaxok Designed to work efficiently and accurately with different profile steel materials. Price does not include disassembly, assembly, transportation and import duties. Please contact us for more information about this machine.

Condition: excellent (used), Year of construction: 2015, With the Hugo, you can lift stacks one at a time. Iodpfozmp T Rsx Aaxotk It is an electrically powered lift truck or stacking/positioning truck used for ergonomic material handling at panel cutting saws or other machines.

Condition: good (used), Code: 0301 Iedpjyk Hzhjfx Aaxstk Brand: PAOLONI Model: P45 - CE Standard Panel saw with tilting blade and scoring unit for panels, furniture, custom-made furnishings, doors, wooden window frames, composite materials, plastics, and various materials - CE Standard Technical data: Aluminum sliding carriage length 3200 mm Carriage lock in any position Cutting width on parallel guide 1250 mm Max blade diameter 450 mm Hole 30 Cutting height at 90° mm 157 Cutting height at 45° mm 111 Tilting blade unit 0-45° Saw shaft speed rpm 3000/3600/4200 Blade motor power 7,5 Hp Automatic saw unit lift Manual tilt with saw unit handwheel Scoring saw unit: Blade diameter mm 125 - Hole 30 - Scoring motor power Hp 1 - Horizontal and vertical scoring saw adjustment Parallelogram blade guard Eccentric clamping arm Saw blade tilt indicator Weight kg 820

Condition: used, Year of construction: 2010, machine/vehicle number: 48/1-006 15500889, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, cutting height (max.): 85 mm, cutting width (max.): 4,400 mm, saw blade diameter: 350 mm, overall weight: 5,000 kg, Equipment: scorer, - Holz Her CUT 6120 - heavy-duty precision high-performance panel saw - year of manufacture: 2010 - cutting length: 4400 mm - saw blade projection: 82 mm - control system: CUTCONTROL 2 - label printer - air cushion tables - main saw unit: 11 kW, saw blade diameter 350 mm Itsdpfxoy D Hb Nj Aaxok - scoring unit: 2.2 kW - saw carriage feed: 0 - 100 m/min, stepless - machine dimensions approx. 9730 x 6450 x 1650 mm - machine has been professionally dismantled and securely stored - trouble-free loading with forklift (included in the price) - location: Líšťany 33035, Czech Republic (approx. 50 km from the German border / Waidhaus)

Condition: good (used), Year of construction: 2007, functionality: fully functional, Cutting area 5300 x 2240/2100 x 80 mm Cutting depth 80 mm Scoring unit Automatic feed Automatic plunge in/out Automatic swiveling Digital display for X and Y axes Automatic locking of the saw beam Isdpfey D R Dbjx Aaxstk The machine will be available from around mid-September.

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Itsdpfjxranpsx Aaxjk Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control

Condition: used, Year of construction: 2011, - max. panel width 4500 mm Iedpfszuyxmjx Aaxetk - max. panel length 2200 mm - max. saw blade projection 127 mm - main saw 18.5 kW - scoring saw 2.0 kW - with lifting table used panel dividing saw Manufacturer: Selco Type: WNTR 730 Year of manufacture 2011 Technical data: Max. panel width 4500 mm Max. panel length 2200 mm Max. saw blade projection 127 mm with lifting table 9 grippers on the sliding fence Flexible grippers for positioning via NC Max. feed rate 130 m/min 1 saw unit with positioning via NC max. tool diameter 470 mm Motor power 18.5 kW Scoring unit max. blade diameter 200 mm Motor power 2 kW Quick-change device QUICK CHANGE SYSTEM Max. feed rate 185 m/min Machine programming software OSI Barcode label printer Barcode scanner Total installed power 44 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Panel saw, panel dividing saw, horizontal panel circular saw, dividing saw Itodpob R Addjfx Aaxsk -Motor power: 6 kW -Speed: 2880 rpm -Diameter max. Saw blade: 340 mm -Cutting height: 100 mm -Saw motor laterally adjustable on dovetail guide: approx. 1000 mm -Saw motor pneumatically adjustable in height -with cleaning brush: 1000 mm wide -Max. Intermediate width: 1700 mm -Dimensions: 2200/1500/H2100 mm -Weight: 1220 kg

Condition: used, Year of construction: 2011, Panel dividing saw Manufacturer: Selco / Systraplan Type: WNTR 710 Year of manufacture: 2011 Itedpfx Aaozuyxysxok with SYSTRAPLAN supporting table Technical data Cutting length: 4300 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: reconditioned (used), Year of construction: 2018, machine/vehicle number: 0-240-95-7986, Used HPP 300/43/43 panel saw, refurbished PERMANENTLY INTEGRATED FEATURES: • Saw blade overhang 80 mm • Cutting length 4300 mm • Right-hand machine • Machine table in the cutting line with air cushion table • 4 tables • Smooth control of the clamping beam • 7 clamps • Main saw motor power: 11 KW Itjdpfx Asy A Rgaeaxjk • Scoring saw motor power: 1.5 KW • Labeling software • Saw carriage speed 130 m/min • ECO Plus technology allowing up to 20% energy saving MACHINE OPERATION: • Operating panel • CADMATIC 5 ADDITIONAL INFORMATION: • Data transfer via WLAN + USB • Label printer • Power Concept DOCUMENTATION: • Available languages: German, English • Format: Data carrier + paper documentation GENERAL INFORMATION: • POWERCONTROL control with POWERTOUCH system • CE marking: YES • Operating condition: undergoing overhaul, ready for demonstration: September 2026 ----- HPP 300/43/43 panel saw Machine operation: * Saw blade overhang 80 mm * Cutting length 4,300 mm * Right-hand design * Machine table in the cutting line with air cushion table * 4 tables * Stepless clamping beam control * 7 clamps * Main saw motor power: 11 kW * Scoring saw motor power: 1.5 kW * Labeling software * Speed of the saw carriage: 130 m/min * ECO-Plus technology for saving up to 20% energy consumption Machine operation: * Control panel * CADMATIC 5 Additional information: * Data transfer via WLAN + USB * Label printer * Power Concept Documentation: * Available languages: German, English * Format: Data carrier + paper documentation General information: * POWERCONTROL control with POWERTOUCH system * CE marking: Yes * Operating condition: General overhaul in progress, ready for demonstration from September 2026 Transport, assembly and training by the seller.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, cutting height (max.): 90 mm, cutting width (max.): 3,800 mm, saw blade diameter: 380 mm, overall weight: 4,400 kg, cutting length (max.): 3,800 mm, main saw diameter: 380 mm, Beamsaw SIGMA IMPACT 90 (SCM Group) suitable for furniture panels precize cutting by one or more panels overlapped. Manufacturer: SCM Group Model: Sigma Impact 90 Production year: 2017 Cutting width: 3.800 mm Cutting depth: 3.200 mm Max. cutting height: 90 mm Front tables (air cushion): 1x 2.500x600mm, 3x 2.500x600mm Machine basement with air-cushion. Max. main blade diameter: 380 mm Scorer diameter: max. 300 mm PUSHER: brushless motor, max. speed 120 m/min ! SAW CARRIAGE: brushless motor, max. speed 150 m/min ! THK linear guides for the saw carriage movement. THK linear guides for the PUSHER movement. Automatic centralized lubrication of THK linear guides. Hi-Tronic kit: - main motor 15 kW (mode S6) - vertical movement of main and scoring blade by price ball-screws - optimized stroke of the main blade - electronic scorer adjustment in 2 axis (vertical, horizontal) - grooving with the main blade (electronic depth adjustment) - postforming cuts - window cut outs (blind cuts) Iedpfx Asx Nc Ayeaxetk - AKE flange for main and scoring blade Quantity of clamps (grippers): 10 pcs (maximum) Automatic exclusion of the clamp acting on the panels edge (up to 800 mm width). Start/stop pedal. Label printer. Control SW: WINCUT Optimalisation program: OTTIMO PERFECT CUT TOP (1x HW key) Control PC Eye-S: Windows + LCD touch screen 21" Air conditioning device for the electric box. Panel´s dimension automatic measuring. Laser line for the visualisation of the cutting line. Automatic double side aligner - motorized (60-2.200 mm). Machine stat: fully working Possibility to see in actuall production. Availability: cca April 2026

Condition: used, cutting diameter / mm saw band length 8800 mm cutting width / mm Itsdezcgkmopfx Aaxek total power requirement / kW weight of the machine ca. / t required space / m

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 2,240 mm, cutting width (max.): 4,300 mm, saw blade diameter: 300 mm, saw blade bore: 30 mm, We are offering this Striebig CONTROL 18 5224 vertical panel saw in very good condition, manufactured in 2021. Please find the valuation report attached. Ijdpfoy N Sf Rex Aaxstk Type: 5224 Cutting length: 4,300 mm Vertical cutting height: 2,240 mm Horizontal cutting height: 2,100 mm Maximum material thickness: 80 mm Rated voltage: 400 V Frequency: 50 Hz Feed speed: 10–25 m/min Standard machine equipment One-piece steel frame Bearing-mounted rollers with automatic brake Dust extraction system integrated into the frame Automatic recognition of the center support strip User-friendly controls for enhanced operating comfort Horizontal laser cut-line projection 12" touchscreen control panel Optimal support surface across the entire cutting area Automatically pivoting steel-wood support section (table) Small-format cutting support integrated into the frame Carbide-tipped saw blade, diameter 300/30 mm Sound-insulated saw housing 5.5 kW drive motor (S6 duty) Electromagnetic motor brake Automatic beam locking Precise unit positioning via push-button control Automatic locking of the cutting unit Automatic saw plunge function Automatic rotation of the cutting unit Operating hours counter DMS digital measuring system in both horizontal and vertical directions (X and Y axes) Expert Cut package Electronic dimension setting on the X axis Automatic positioning of the beam and cutting unit 12" control screen Striebig cutting optimization software Label printer Option for connection to the company network The package also includes a KOGI dust extraction unit with a 2.2 kW motor and 1,650 Pa suction pressure. Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: good (used), Year of construction: 1998, Striebig Automat III TRK, manufactured in December 1998 Technical details: Power: 4.4 kW (5.98 hp) Input voltage: 400 V Input current: 12 A Cutting height (max.): 2,200 mm Cutting width (max.): 4,300 mm Saw blade diameter: 300 mm Speed (min.): 4,750 rpm Overall length: 5,400 mm Total weight: 1,000 kg Itsdpoznncmefx Aaxsk Location: available from stock in 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1995, machine/vehicle number: 25486, functionality: limited functionality, power: 4.4 kW (5.98 HP), input voltage: 400 V, input current: 12 A, cutting height (max.): 2,200 mm, cutting width (max.): 5,300 mm, saw blade diameter: 300 mm, rotational speed (min.): 4,750 rpm, total length: 6,400 mm, overall weight: 1,000 kg, Equipment: scorer, Types: 6220 AV, cutting capacity: 5300V2200X80 mm, pre-scoring unit Itodpeywtw Dsfx Aaxek

Condition: used, Year of construction: 1988, Panel saw Manufacturer: Rapid Model: PK 100 Iedpfx Aajzuynboxetk Year of manufacture: 1988 Note: The technical data and descriptions are copies of the original order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 4,200 mm, feed length Y-axis: 2,100 mm, feed length Z-axis: 60 mm, main saw diameter: 250 mm, Used vertical panel saw for sale. The machine is in daily use and can be inspected in operation. Several saw blades will be included. Itedpeygv Dwjfx Aaxek

Condition: good (used), Year of construction: 2017, - Cutting width (mm): 4300 - Cutting depth (mm): 4200 - Cutting height (mm): approx. 80 - Power (kW): 16 - Vacuum suction pads: included Isdpfjy Tm Dcjx Aaxstk

Condition: used, Year of construction: 1989, Cutting length: 5300 mm Cutting height: 2100 mm Cutting depth: 80 mm Scoring unit: no Itsdpjzqyyisfx Aaxjk Feed: manual Horizontal cut display: scale Vertical cut display: scale Saw blade diameter: 300 mm Swiveling material support: yes Saw blade speed: approx. 4000 rpm Motor power: 4 kW Machine length: 6500 mm Machine depth: 1500 mm Machine height: 2800 mm Weight: 800 kg