Used Baeko Machine for sale (64,731)

Condition: used, Year of construction: 2016, weight of the machine ca. 5200 kg Bsdpfo Ahklmex Adholp

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive Bedpfoxpqy Dsx Adhelp - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Bedpfxjttc Uae Adhjlp

Condition: as good as new (ex-display), Year of construction: 2024, bore capacity in steel (diameter) 32.0 mm throat 230 mm bore stroke 120 mm morse taper 3 MK table: 400 x 320 mm turning speeds 105 - 1725 U/min total power requirement 1.2 kW weight 245 kg range L-W-H 470 x 810 x 1710 mm Furnishing: - Compact, stable cast iron construction in a modern design - Infinitely variable speed control - is changed The speed is read on a digital display - Table height adjustment via rack and crank - Right and left rotation of the quill for thread cutting - Powerful 2-stage motor, speed range from 105 - 1725 rpm - Base plate with T-slots for clamping high workpieces - Safety switch with undervoltage release - The spindle runs in the precision ball bearing scope of delivery Bledpfxsw U U N Io Adhop - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MK 3/2 - Digital speed display - LED machine light - Height-adjustable protective cover

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 25,995 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: SINUMERIK 840D SL, laser type: diode laser, laser source manufacturer: TRUMPF, laser hours: 14,600 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, feed rate Z-axis: 100 m/min, workpiece weight (max.): 900 kg, input current: 42 A, type of cooling: water, year of last overhaul: 2026, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Special equipment: + LiftMaster Compact 1530 (Type AL34) with loading cart + 3001 on TruDisk 4001 + BrightLine fiber + Nozzle changer + Wireless Operation Point + Performance package for fusion cutting + High-speed cutting package + High-speed eco cutting package + Copper cutting package + Brass cutting package + Transverse conveyor with tilting hopper + Storage interface + LiftMaster Compact 1530 (Type AL34 with loading cart) + Auxiliary pallet operation with loading cart + Safety fence Optional, at an extra cost: 1. Assembly, commissioning, partial overhaul and training of up to 3 operators at the customer's site, with a functional guarantee upon acceptance. 2. Workshop overhaul of the machine with commissioning and acceptance according to manufacturer's specifications in our workshop. Assembly, commissioning of the machine, and training of up to 3 operators at the customer's site. Standard equipment: - Closed machine frame - Automatic pallet changer in the longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Machine cooling unit (water-air) - Integrated control cabinets with internal lighting - Longitudinal conveyor - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk with 1 fiber optic output - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control Cutting unit - Universal cutting unit - Single cutting head strategy - Protective glass against lens contamination - ControlLine: Height control and sheet edge detection Control system - Workshop programming (TruTops via network access) - Quick reproduction - Touch color screen - Integrated technology data - Automatic shutdown Blodpfxj Ahhu Ue Adhjp - Programmable cutting gas/pressure selection - ContourLine - Microweld - FastLine - FlyLine - AdjustLine - Teleservice via internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust collector - Machine enclosure with certified viewing window (right door) - Roof cover

Condition: ready for operation (used), functionality: fully functional, A very nice Ideal type 5251-90 is for sale. It features a digital display and automatic pressing, operating on 220 volts. It comes complete with an extra blade. You are welcome to test this machine at our location. We can arrange transportation and packaging for you and load it into a truck or container. Please inquire about a price including transportation (within the Netherlands). Bljdpfx Ao Ahh T Eodhjp Best regards, Henk Hoos.

Condition: used, Consisting of: “GEA-CFS” battering machine Type ER 900 all stainless steel belt width 900 mm mobile mesh width 5 mm adjustable speed with air knives Bodpfo Ahg Txjx Adholp with batter pump outside dimensions (l x w x h) : ± 1.700 x 1.500 x 1.700 mm + “GEA-CFS” breading line Type PR 900 2,83 kW suitable for standard belt width 900 mm mobile adjustable speed adjustable working height with air knive outside dimensions (l x w x h) : ± 2.800 x 1.200 x 2.100 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 500 mm y-travel 450 mm z-travel 400 mm Control Heidenhain iTNC 530 tool taper HSK 63 total power requirement 34 kVA weight of the machine ca. 4810 kg Accessories oil-mist-extractor Additional information Operating hours: 89.800 Spindle hours: 43.800 Machine with new milling spindle, replaced 2026. CNC control: Heidenhain iTNC 530 Equipment and accessories: Pallet changer (Automation PH 150/8) 60-position tool changer Electronic handwheel HR 410 Touch probe (TS) Chip conveyor Internal coolant supply system Oil-mist-extractor Machine without tool taper and clamping devices. Blsdpfj Ahn Hysx Adhep

Condition: used, boneless meat, sausage, cheese, or fish 400V, 50 Hz/3/N/PE 32A approx. 10 kW compressed air connection values: min. pressure 4 bar cutting system sickle blade: max. speed at blade head WSK 2,000 min-1 Drive: feed, cup, portioning unit CCU: servo motors Drive power transmission: toothed belts Feed power transmission: precision ball screw drive Cutting thickness: 0.1 to 100 mm (depending on product and cutting capacity) product passage width: adjustable up to max. 380 mm product passage height: adjustable from 125 to max. 180 mm (optionally up to 200 mm) programming: dialogue via touch screen program memory locations: 100 2 sickle blades total dimensions (L x W x H): ± 3,000 x 1,600 x 2,700 mm Blodpfs Ahn Ukex Adhjp + "Wibotec" single-pan weighing scale Type Continuous checkweigher 200 - Web 99T 355 -365 Web Module Length: approx. 485 mm Width: approx. 535 mm Weight: approx. 150 kg Power transmission of the drives: gears 9 g - 3750 g + Monosorting rocker Type CCR Length: approx. 450 mm Width: approx. 380 mm Weight: 250 kg Drive power transmission: toothed belts Motor type: asynchronous motors or servo drives, depending on the slicer type + Conveyor belt Type CCE total dimensions (L x W x H): ± 4,100 x 960 x 1,500 mm drive power transmission: toothed belts motor type: asynchronous motors or servo drives

Condition: used, Year of construction: 1970, taper MK 4 Bljdpexzu Dqofx Adhep feeds: ja weight of the machine ca. 1,5 t

Condition: used, Year of construction: 2000, overall weight: 12,000 kg, Used machining center from AXA Type VSC-1-4000-M/E ISO 40 tool holder X / Y / Z = 4000 / 550 / 600 Bsdpfe Ahnq Ssx Adhelp Heidenhain TNC 430M CNC control 22-position tool changer Tools not included.

Condition: used, Year of construction: 2002, travel distance X-axis: 400 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 30, Machining Center - Universal Manufacturer: MIKRON Type: UCP 600 Year of manufacture: 2002 Control system: Heidenhain iTNC 530 Technical specifications: X-axis: 400 mm Y-axis: 450 mm Z-axis: 450 mm C-axis: 360° C-axis rotational speed: 30 rpm A-axis: +107° / -10.5° Blodpfxe Ahrm Se Adhsp Spindle speed: 20,000 rpm Number of tool stations: 30 Condition: Used Technical features & accessories: - Oil/air lubrication system - Water cooler Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to modifications and errors in the technical data and information; prior sale reserved!

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Bjdpfx Asy N Du Djdhjlp Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Offer without obligation Paper Cutting machine complete flow line Make: POLAR Type: 137-XT Format: 137 cm Built: 2007 Mach.-Nr.: 7741406 total cuts 4,4 mill · digital program-automatic · color Touch-Screen display · cutting-table with air-cushion · 2 large sidetables Blodpfx As Ahrzqedhop · 2 center air corners · Polar Transomat TR 130 EL 4 - age 2007 · all tables chromed with air-cushion · safety-system Price under request Available immediately. More pictures and video is available.

Condition: used, Year of construction: 1999, CNC machining center Manufacturer: Homag Type: BAZ 31/60/K Optimat Year of manufacture: 1999 Technical data - Workpiece length max. 6600 mm with single workpiece placement max. 2700 mm with alternating workpiece placement - Workpiece width max. 1200 mm - Workpiece thickness with edge max. 60 mm without edge max. 60 mm with standard clamp without edge max. 120 mm with clamping template when chamfer milling min. 12 mm when radius milling min. 2x radius + 10 mm - Working height, lower edge of workpiece 950 mm - 2 vacuum pumps, each with 66/100 m3/h for clamping system Main spindle 12 kW, water-cooled - for HSK F63 Bjdpfx Ae Ahmz Djdhslp - Three-phase asynchronous motor 12 kW at S1, 600 Hz - Speed range: 1500 - 18000 rpm - Tool weight max. 6 kg incl. tool holder Tool changer, 12 positions - for tools and aggregates with HSK F63 - 12 x diameter max. 130 mm or - 6 x diameter max. 180 mm and 6 x diameter max. 70 mm - Tool diameter for grinding tools max. 200 mm Aggregate interface BAZ for main spindle For accommodating the machining and gluing aggregates with integrated pneumatic-electrical-electronic supply and pivoting drive, C-axis. Swiveling range without limitation. Hose-free compressed air supply. Drilling head with 17 spindles - 1 motor 1.9 kW, frequency-controlled - Speed selectable via program 4500/6500 or 8000 rpm - Each spindle can be activated individually - Arrangement of spindles in T-shape. - 11 spindles in X-direction, 7 spindles in Y-direction Homatic control system CNC programming system WOODWOP Postprocessor Programming based on CNC drawing Laser positioning aid for vacuum clamping system Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: new, Year of construction: 2026, Ref. -No.: 10464 Manufacturer: IGREK Type: 3500 XXL Year of construction: 2026 Type of control: CNC-Steuerung Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Country of origin: Türkiye X-Travel: 10500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° B-Axis: 360 ° Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Spindle Speeds: 12500 RPM Machine length: 16000 mm Machine width: 7400 mm Machine Height: 8500 mm Weight: 195 t Further information: GREK 3500 XXL – Customized precision for large-scale projects The IGREK 3500 XXL is a CNC 5-axis portal milling machine of the latest generation, developed for the high-precision machining of large components. Built in 2024, it is ready for immediate use and equipped with the latest technology to meet the most demanding requirements in heavy industry and mechanical engineering. Key features: Gigantic machining areas: With travel distances of 10,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine offers extraordinary flexibility for machining large parts. 5-axis simultaneous machining: The A-axis with +/- 115° and the B-axis with 360° guarantee maximum precision and versatility when machining complex workpieces. Powerful spindle: Equipped with a speed of up to 12,500 rpm, a maximum torque of 235 Nm and a drive power of 54 kW – ideal for high-performance machining. Robust and durable: Weighing 195 tons and with a table load of up to 4,000 kg, the machine is designed for heavy-duty machining. Innovative tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and increases efficiency. Speed and efficiency: Rapid feed rates of 30 m/min on all axes ensure maximum productivity. Technical data at a glance: Traverse paths: X 10,500 mm / Y 3,500 mm / Z 1,400 mm Spindle power: 54 kW Spindle speed: 12,500 rpm Table load: up to 4,000 kg Machine dimensions (LxWxH): 16,000 x 7,400 x 8,500 mm Weight: 195 tons Additional benefits: The machine is supplied with the advanced Siemens 840D or Heidenhain iTNC 640 control system and offers worldwide warranty and service support from the manufacturer. Blsdpfx Aexc Tr Aedhop Choose the IGREK 3500 XXL for precision and efficiency in the machining of large parts. Contact us now for a non-binding offer!

Condition: good (used), Year of construction: 2012, Ref. -No.: 10469 Manufacturer: JAESPA Type: Comfort 420 A Year of construction: 2012 Type of control: N/A Blodjy Ed D Dspfx Adhep Control: N/A Storage location: Halberstadt Country of origin: Germany

Condition: good (used), Year of construction: 1990, Ref. -No.: 10544 Manufacturer: DECKEL Type: KF 2 Year of construction: 1990 Type of control: N/A Control: N/A Storage location: Halberstadt Country of origin: Germany Power Capacity: 1,6 / 2,0 kW Tool Taper: 20 mm Ø Space requirements: 1600 x 1350 LxWxH (mm) Feed rate: 0-350 mm / min Vertical portal passage, clamping table - lower beam cross member: 300 mm Distance table - spindle nose with vertical milling spindle: 50 mm Distance table - spindle nose with horizontal milling spindle: 450 mm Machine Height: 1950 mm Weight: 2,1 t Pre-milling spindle: 80...1000 min-1 Collets: 20 O taper bushing: Morse 1 Touch lift: 12 O Speed of the milling motor: 1400 RPM Further information: - Optical testing device - Pre-milling spindle - Model milling device - Rotary table - Inclined spindle - Mirror image milling device - Reduction and enlargement device Blodpfj Ahmu Eox Adhep - Roller engraving devices - Machine vice hydraulic clamps - Auxiliary clamping table - Dividing head - Tool cabinet - Clamping claws - template bars - articulated light The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2012, Ref. -No.: 10659 Manufacturer: DECKEL MAHO Type: DMC 835V Year of construction: 2012 Type of control: CNC Control: Haidenhein iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 1541XXX X-Travel: 835 mm Y-Travel: 510 mm Z-Travel: 510 mm Number of T-slots: 5 Max. Tool Weight: 6 kg Max. Tool Length: 250 mm Max. Tool Diameter: 80 mm Tool change time: 1,6 s T - groove width: 14 mm T - slot spacing: 100 mm Tool Taper: SK40 Numbers Of Tools In Magazin: 30 Spindle Speed: 12000 RPM Max. Torque: 130 / 87 Nm Turning Speed Range - Stepless: 30 mm / min Total Power Requirement: 35 kW Dimensions Of The Machine Ca.: 4,5 x 3,5 x 2,7 m Weight Of The Machine Ca.: 5 t Changeover time chip - chip: 6 sec Feed rate: 1 - 20.000 (X / Y / Z) Blsdpfxezw Tw Uj Adhjp High pressure cooling: 20 bar Further information: The machine can be inspected while powered on by prior arrangement.

Condition: good (used), functionality: fully functional, For sale is a used, custom-built box-clamping machine for the production and assembly of wooden boxes. The system is equipped with a total of 6 hand-operated clamping devices from the Senco brand. The clamping devices are activated via foot valves, allowing the box parts to be positioned and clamped together during the work process. Particularly suitable for the production of wine boxes, fruit boxes, vegetable boxes, and other wooden packaging. Technical data / equipment: Manufacturer: Custom-built Machine type: Box-clamping machine / Box assembly machine 6 hand-operated clamping devices Clamping device manufacturer: Senco Activation via foot valves Pneumatic operation For clamping box parts together Workpiece support / workbench Adjustable fixture for different box dimensions Robust frame construction Suitable for: Wine boxes Fruit boxes Vegetable boxes Packaging boxes other wooden boxes and wooden packaging The machine is in used condition. Equipment and condition as shown in the photos. Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available shortly. Bodpfx Adezynf Sohelp The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: used, Year of construction: 2017, Used straight-line edging machine, capable of mitering from 0° to 45°, Bavelloni Type VE500-V10, manufactured in 2017. Bljdpfe Ahnnhjx Adhep

Condition: used, Year of construction: 1954, functionality: fully functional, grinding length 600 mm grinding width 205 mm Blodpfx Adovu Hkyshsp x-travel 600 mm ja

Condition: used, Year of construction: 1988, Bed milling machine Manufacturer: Correa Type: A16 Year of manufacture: 1988 Control: HEIDENHAIN TNC415 Travel distances X/Y/Z: 1,800 x 800 x 800 mm Bsdpfx Adozt U T Ajhelp Clamping area: 2,000 x 630 mm Workpiece weight: 3,000 kg Operating hours: 12,103 Power: 19 kW Spindle type: ISO 50 Dimensions L/W/H: 4,886 x 2,720 x 2,500 mm Machine weight: 7,500 kg 31126

Condition: excellent (used), Year of construction: 2000, Sanding belt dimensions: 75 x 2000 mm Contact wheel width/diameter: 75/200 mm Sanding belt speed: 15/30 m/s Drive motor: 380 V, 4 kW Adjustable face grinding table: 75 x 430 mm Bodpsznh I Nefx Adhjlp Space requirement: 1000 x 450 x 1100 mm Weight: 95 kg

Condition: new, Year of construction: 2026, Maximum pressure: 40 tons Stroke length: 250 mm Maximum speed: 10mm/sec Return speed: 20mm/sec Bsdshgihkjpfx Adholp Work table: 660x1250 mm Working height: 900 mm Oil tank: 60 Liter Maximum workpiece height: 250 mm Strip capacity: 200x26 mm Pipe capacity: 60x5.0 mm *not with standard tools - Digital limitation of the stroke and the return stroke. - NC control. - Hydraulic pressure adjustable - Bending speed adjustable - Completely closed table - The ZOPF construction makes it possible to change tools quickly and without loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, which means that even under heavy load there is no loss of accuracy occurs. - With the universal tool holder and the various tools, you can work extremely flexibly.