Used Edm Machine for sale (64,816)

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm Hodox D Tbmjpfx Andenu 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Hjdpfx Ajz St Hwsndjnu Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, coolant, Low Volt light.

Condition: excellent (used), Year of construction: 2017, operating hours: 12,300 h, functionality: fully functional, machine/vehicle number: 7846, travel distance X-axis: 455 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, total height: 2,600 mm, total width: 2,160 mm, total length: 2,600 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 450 mm, table length: 820 mm, warranty duration: 6 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 2,800 kg, table load: 800 kg, input frequency: 50 Hz, Equipment: documentation/manual, EDM312MF30 + AWEX100/5 100 electrode positions 5 pallet positions 320x320mm Operating hours 12,300h Technical data: Travel ranges: 455x300x300mm Workpiece table 820x400mm Tank size 900x520mm Filling height 300mm Distance table/electrode holder 150/450mm Workpiece weight max. 800kg Dielectric fluid max. 700l Dimensions WxDxH 2160x2000x2610mm Machine weight 2500kg Mains connection 3/N/PE 400/230 50Hz Power consumption 6.7 kVA Equipment: Color: Light/Gray Control interface MF30 V3.2 Touch screen display Generator, exogenous 60A Direct measuring system in all axes Cartridge filter Cooling unit integrated CO2 extinguishing system C-axis 100/min., holding brake Hnodpfx Aoz I Symjndju Manual control panel with accept button Lowering tank, automatic positioning Chuck Erowa Warranty 12 months Transport Commissioning on site Training

Condition: excellent (used), Year of construction: 2023, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, Hsdpfx Anoz Srv Dsdsnu low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, Hnodoz R Rbdspfx Andeu table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC.

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Hnsdey Ni Ivopfx Andju Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm Hnsdpoyzf Najfx Andju D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Hnedjxxb Rrepfx Andju

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Control: Prototrak SLX Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Hnedpfx Aezrnkrondou Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Fully refurbished OPS Ingersoll Gantry 500 Wire EDM Machine – in top technical and visual condition The machine underwent a comprehensive and professional overhaul in our facility and is in very good condition both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric survey, alignment, and additional check using a laser measuring system were performed. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and now presents itself in a very well-maintained visual condition. The generator and control system were cleaned and technically inspected. The generator's air conditioning unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent an extensive erosion test in accordance with the quality and testing specifications of OPS Ingersoll. The machine is ready for immediate use and is ideal for reliable production operations. Technical data: Ingersoll (OPS Ingersoll) Wire EDM Machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Manual erosion with Powertec Handheld High-speed jump max. 18 m/min Generator power 60 Amps, EAGLE Powertec Travel ranges (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up plate changer Work tank (W x D x H): 770 x 670 x 440 mm Work table (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Hsdpsyzw I Isfx Andsnu Special equipment: Linear measuring system in all axes (Z as standard) 16.10.

Year of construction: 2016, condition: used, overall weight: 4,200 kg, total length: 2,900 mm, total width: 3,260 mm, total height: 2,200 mm, workpiece weight (max.): 3,000 kg, FANUC ROBOCUT α-C800iB Wire EDM Machine Technical Specifications: Max. Workpiece Dimensions: 1,250 × 975 × 300 mm Max. Workpiece Weight: 3,000 kg Wire Diameter: 0.10–0.30 mm Max. Taper Angle: ±30° / 150 mm Max. Wire Spool Weight: 16 kg Travel X-axis: 800 - mm Travel U-axis: 200 - mm Dimensions (LxWxH) approx.: 2900 x 3260 x 2200 mm Component weight max.: 3,000 kg Control: FANUC Series 31i-W Model B Travel Y-axis: 600 - mm Travel V-axis: 200 - mm Weight approx.: 4,200 kg Travel Z-axis: 310 - mm Year of construction: 2,016 Terms of payment: 100% prepayment before pick-up Hnjdpfx Anjz N Nuxedou Terms of delivery: From foundation under power: Yes

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar Hodezuxn Tspfx Andjnu For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, total height: 2,680 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 2,100 kg, type of input current: three-phase, feed length W-axis: 300 mm, power: 6 kW (8.16 HP), drill diameter: 6 mm, Equipment: documentation/manual, Topedm TSH-400T CNC CNC electro-discharge drilling machine with electrode changer and guide changer Year of manufacture: 2007 Includes guides, collets, and various spare parts Operates with brass electrodes Automatic electrode changer Automatic, patented guide changer Predefined machining parameters Repeatability: 0.01 mm Burr-free drilling Hedpfsztyxdsx Andsnu Automatic electrode wear compensation enables precise blind hole drilling Full water bath machine Water treatment unit Deionized water as dielectric, no additives required Deionization, large filters Water chiller Additional flushing at the guide Technical data Max. travel (X x Y x Z): 400 x 400 x 380 mm Table size: 480 x 458 mm Electrode diameter: 0.15 to 6.0 mm Maximum distance head / table: 315 mm Machine head movement (W-axis): 300 mm Repeatability: ± 0.01 mm Number of positions in automatic electrode changer: 21 Maximum working current: 50 A Automatic guide changer: 5 guides Fillable working tank Working tank size (L x W x H): 670 x 930 x 330 mm Power consumption: 6 kW Footprint (L x W x H): 2700 x 1900 x 2680 mm Weight: 2100 kg Optionally, more than 1000 multi-channel brass electrodes, 0.3 to 6 mm, are in stock and can be sold at a favorable price. The machine is in good condition and can be tested under power. Inspection is possible during our business hours or by appointment. The sale is due to upcoming retirement.

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Manufacturer: Apollo Hnedsz Iz Imepfx Andsu Model: 4AX 2030 Year of manufacture: 2021 Condition: used Machine type: CNC Router If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 072-003, workpiece weight (max.): 300 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, total height: 1,940 mm, total length: 1,340 mm, total width: 900 mm, type of input current: three-phase, overall weight: 910 kg, table length: 400 mm, table height: 300 mm, input voltage: 400 V, tank capacity: 20 l, input frequency: 50 Hz, input current: 30 A, Equipment: documentation/manual, Comes with accessories: set of pliers ranging from 1mm to 4mm. Hjdpfx Anozr D Dnodjnu

Year of construction: 1995, condition: good (used), ARD EDM diesinking machine offered. Type: M 50 F Control unit: ARD system Facile A X-travel: 310 mm Y-travel: 200 mm Z-travel: 200 mm Bed: 360 x 600 mm Power: 5,5 KVA Spindle type: System 3R Spindle stroke: 200 mm Year: 1995 Dimensions: 150x135x210 cm LxWxH For more information call us or send an e-mail. Hsdpfxjhktttj Andonu

Condition: used, Year of construction: 2022, machine/vehicle number: T0616, with CNC control, manufactured by SODICK, type: LN2, travels: X-axis: 350 mm, Y-axis: 250 mm, Z-axis: 270 mm, with automatic tool changer with 4 tool positions, resolution: 0.0001 mm, work table (made of ceramic), size: 600x400 mm, max. workpiece weight: 550 kg, max. electrode weight: 50 kg, dielectric fluid capacity: 400 l, machine dimensions: 2080x1955x2350 mm, machine weight: 3200 kg, with CO2 extinguishing system, operating hours: 1690 h. Hodjz Nhtmspfx Andonu

Condition: excellent (used), Year of construction: 2021, FANUC ROBOCUT C400iC wire EDM machine + FANUC CRX-10iA robot, manufactured in 2021. FANUC 31i-WB CNC control. X, Y, Z LINEAR SCALES. AUTOMATIC DOOR. Hsdpfoz Hw Hcex Andonu FANUC ROTARY TABLE. CHILLER UNIT. Travel: X 400, Y 300, Z 255, U +60, V +60 mm. Maximum taper 30°/80 mm. Maximum dimensions of the part to be machined: 730 x 585 x 250 mm. Maximum weight of the part to be machined: 500 kg. Wire spools up to 16 kg. Wire diameters: 0.10-0.30 mm. FANUC CRX-10iA ROBOT. VISION SYSTEM. 6 controlled axes. R-30iB Plus controller. Maximum load: 10 kg. Maximum arm length: 1,249 mm.

Year of construction: 2002, condition: used, X-axis: 550mm, Y-axis: 350mm, Z-axis: 400mm, U-axis: 550mm, V-axis: 350mm, connected load: 12kVA, length: 2810mm, width: 2600mm, height: 2080mm, weight: 2.85t, operating hours: 28,608h, with documentation, an on-site inspection is possible. Hnsdjz Sr Nqepfx Andsu

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Y axis working area: 2040 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 12 Hnsdoz S T Ubopfx Andsu

Condition: good (used), travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 200 kg, table width: 300 mm, overall weight: 800 kg, type of input current: three-phase, table length: 600 mm, workpiece length (max.): 400 mm, Fast-Hole EDM Brand: Tecnosystem Model: D3-DM FAGOR 3-Axis NV 300E Coordinate Display Travel: - X-axis: 350mm - Y-axis: 250mm - Z-axis: 350mm Electrode rotation speed: 200 rpm Head travel: 200mm Table dimensions: 600x300mm Maximum workpiece weight: 200kg Dielectric fluid capacity: 200L Drilling capacity: Drill/electrode diameters from 0.3mm to 6.3mm. Maximum electrode length: 400mm Weight: 800kg The Tecnosystem D3-CM is a fast-hole EDM machine (or EDM drilling machine/super-drilling machine). In machining workshops, it is commonly used as auxiliary equipment for wire cutting to create the initial holes through which the cutting wire is subsequently passed. Function: Fast drilling using an electric arc on conductive materials (hardened steels, etc.) using rotating tubular electrodes made of brass or copper. Key applications: Drilling threading holes for EDM wire, extracting broken taps, and creating small cooling or ejection holes in molds and dies. Hjdpfx Asz Dt Uksndsnu System: High-pressure injection of dielectric fluid through the tubular electrode.

Condition: repair required (used), Manufacturer: FANUC Type: A04B-0221-B201 The condition of the machine is unknown; it is not functioning. It is being sold in its current condition. !! We do not know what the problem is! Hnedpfxjik Hb Te Andsu

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Hnsdpfez Eh Nljx Andju Table size 1200mm x 600mm, spindle speed 12000rpm, spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, 43M/min rapids, Spindle taper BT40, 30 station ATC, through spindle coolant, swarf conveyor.

Condition: excellent (used), Year of construction: 2022, 400mm swing, 220mm max diameter, 510mm cutting length, Siemens 828 Control, 65mm bar capacity, 12 station turret, 17kW Spindle Motor, Hnjdpfx Asz Hatfondeu Spindle Speed 4000rpm, 3 jaw chuck, low volt light, coolant, Tool setter, swarf conveyor

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, General overhauled OPS Ingersoll Gantry 500 Wire EDM machine – in top technical and optical condition. The machine has been comprehensively and professionally overhauled in our workshop and is in very good condition both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional check using a laser measuring system were performed. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and is now in very good cosmetic condition. The generator and control unit were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test according to the quality and testing specifications of OPS Ingersoll. The machine is immediately ready for operation and is ideal for reliable production. Technical data: Ingersoll (OPS Ingersoll) Wire EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture 2009 Control system EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Manual erosion with Powertec Handheld Hsdoyrqpfepfx Andonu High-speed jump max. 18 m/min Generator output 60 amps, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer 20-position pick-up disc changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 30.09