Used Bag Opener for sale (10,873)

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. Ledpfxoy Urtfo Aifsrp The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Bag opener, for opening bags containing recyclable materials such as "yellow bags," etc. Can be used as a stand-alone unit or as a component in a system, e.g., a sorting system. Throughput: 6-7 tons/hour Drive power: approx. 18 kW Dimensions: 8000 x 2350 x 2700 mm Weight: 11 tons Made to order Delivery time: approx. 30 weeks Lsdodxwlzopfx Aifjrp Further data and quotation upon request.

Year of construction: 2025, condition: new, The Bag Opening Silo is a compact and flexible solution designed for efficient emptying of small and big bags containing cement, lime, and other powdered materials. Big bags can be safely and easily unloaded using a forklift or other lifting equipment, ensuring a clean, safe, and controlled material transfer process. This system represents a practical solution for construction sites and production locations where bulk cement delivery by tanker is not possible, enabling continuous use of bagged materials. In addition to material emptying and dosing, the system can also be used as a temporary or permanent intermediate storage solution, providing full protection of the material from moisture, dust, and other external influences. The system can be easily connected to existing mobile and stationary concrete batching and mixing plants, allowing fast integration into the existing production process. Upon customer request, the system can be equipped with load cells for precise material weighing and control. The discharge capacity is 15 m³/h. Thanks to its compact construction, easy handling, and high functionality, the Bag Opening Silo represents a reliable and practical solution for handling powdered materials at various construction sites and production facilities. Lrjdpfx Aozcwrhoifsp Available models: - BS 02 - Capacity: 2 m³ - BS 04 - Capacity: 4 m³ - BS 06 - Capacity: 6 m³

Condition: new, Year of construction: 2026, BULK PRODUCTS BAGGING LINE PUDAS-50NB is designed for automated packaging of bulk products (type of peat, turf, pellets, sand or simillar) by weight • The process is managed via color Touch-screen, multilingual Menu. Lrsdpfx Aiei El Hrofsp • Suites for dosing into bags from 5 to 50 kg. • Capacity arround 3000 kg/hour. (depending on the product charactersitics and the size of the bags) operated by one person • Power supply 1ph., 230V, 3.2kW • Dimensions: L6.6m x W2.5m x H2.0m Made in Lithuania. CE certified.

Condition: good (used), Saxon Continuous Bag Sealer Stainless steel Adjustable temperature control Lodjzcrlcspfx Aifjrp Electric adjustable mast height Mobile on castors Excellent condition Price € 8,900

Condition: good (used), Saxon Bag Sealer With Reverse Facility With Top Bag Cutter With Hydraulic Lift Mast Lodpfjv Dm Epjx Aiforp Stainless Steel 230 Volt Power Supply Price € 3,950

Condition: good (used), Year of construction: 2013, Saxon Bag Sealer Model SR1000 Adjustable temperature control Digital display Adjustable mast height Year 2013 Stainless steel Mobile on Castors Ledpfxsp At T Io Aiferp Price € 5,950

Condition: good (used), Saxon Bag Sealer Lodpev Dm Dlofx Aiferp Stainless Steel With Stainless Steel Conveyor 230 Volts Single Phase Power Height adjustable mast Mobile on castors Fixed adjustable feet also Conveyor belt dimensions 1500mm L x 400mm W Price € 5,950

Condition: good (used), OK Supersealer Continuous Bag Sealer Fully stainless steel Complete with stainless steel belt conveyor Adjustable temperature control Stop start controls, E stop Height adjustable sealing head Ledpfx Aiozbnnkoforp Mobile on castors and lockable feet The best bag sealer on the market Price € 9,500

Condition: good (used), Saxon Bag Sealer Stainless Steel Complete with stainless steel mesh belt conveyor Lsdpfxozbnmgs Aiforp Variable speed control Adjustable Temperature control Suitable for heavy gauge bags Mesh belt 250mm wide Machine dimensions 1800mm Long x 800mm Wide Price € 6,950

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2025701, total width: 2,600 mm, total length: 9,500 mm, total height: 1,900 mm, cutting length (max.): 530 mm, type of input current: three-phase, compressed air connection: 8 bar, power of the servo motor: 4,000 W, power: 4 kW (5.44 HP), overall weight: 8,000 kg, inner diameter: 76 mm, feed rate X-axis: 160 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 35 m/min, feed length X-axis: 530 mm, feed length Y-axis: 130 mm, feed length Z-axis: 800 mm, working width: 1,050 mm, input voltage: 380 V, installation height: 2,500 mm, Gutenberg MASTER BAG 300X (2026) – High-Speed Square Bottom Paper Bag Machine Boost your production with the MASTER BAG 300X, a next-generation roll-fed paper bag machine engineered for industrial manufacturers producing eco-friendly packaging at scale. Built for reliability, precision, and speed, this fully servo-driven system is ideal for producers replacing plastic packaging with sustainable kraft paper solutions. Built for Industrial Paper Bag Production The MASTER BAG 300X is designed for continuous, high-volume manufacturing of square bottom paper bags without handles. Its fully automated workflow ensures consistent quality while reducing labor and material waste. Why manufacturers choose this model Fully automatic roll-fed production High output up to 220 bags per minute Flexible bag size range for multiple markets Servo-driven precision and stable operation CE-certified for global compliance This machine is perfect for companies expanding into sustainable packaging. Precision Engineering & Automation The 2026 model integrates YASKAWA servo technology and a modern control system that automates the full production cycle: • Automatic paper feeding and tension control • Tube forming and precise cutting • Bottom folding and gluing • Automatic stacking and counting • Multilingual HMI touchscreen for easy operation The result: high efficiency, low waste, and consistent bag quality. Technical Specifications (2026 Model) Bag Format Range Bag Length: 280 – 530 mm Bag Width: 150 – 330 mm Bottom Width (Gusset): 70 – 180 mm Material Compatibility Paper Thickness: 60 – 150 gsm Paper Roll Width: 470 – 1050 mm Max Roll Diameter: 1500 mm Core Diameter: 76 mm Performance Maximum Speed: Up to 220 bags/min Installed Power: 8 kW Power Supply: 380V / 3-phase / 50Hz Compressed Air: 6–8 bar Machine Data Weight: 8,000 kg Dimensions: 9500 × 2600 × 1900 mm Advanced Features ✔ Fully servo-driven YASKAWA system ✔ Photoelectric cutting length control ✔ Inline gluing and bottom forming Lrodpfx Aowzm I Roifsp ✔ Automatic stacking and counting ✔ Supports printed, unprinted, and PE-coated papers ✔ Optional inline flexographic printing unit available ✔ CE certification for EU and global markets Designed for Multiple Industries The MASTER BAG 300X enables manufacturers to supply a wide range of markets: Food & Dry Goods Flour, sugar, rice, pasta, grains, baking mixes Coffee, tea, spices, lentils, nuts, dried fruits Bakery & Takeaway Bread bags, pastries, cookies, fast-food packaging Retail & E-commerce Grocery stores, organic shops, takeaway and boutique bags Agriculture & Pet Food Seeds, fertilizer, animal feed, eco pet food packaging Pharma & Herbal Powders, supplements, herbal products DIY & Hardware Screws, tools, small parts packaging A Sustainable Production Investment The MASTER BAG 300X is a powerful solution for manufacturers transitioning to plastic-free packaging while increasing capacity and profitability. Reliable, efficient, and built for long-term production — the MASTER BAG 300X is a smart investment for the future of paper packaging. Contact us today for pricing, configuration options, and delivery availability.

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP Lrjdpjzf Nk Tefx Aifep • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Year of construction: 2019, condition: used, functionality: fully functional, Approximately 250 pieces in stock. Price per piece: 100 Euros. A mix of used and new items. Lrodpsy Uc Sfofx Aifjp

Condition: used, Automatic Bag Filling Line Bag weights from 5kg to 1000kg Lrsdpfx Aoyq Tb Isifep Infeed with product de-clumper / product breakup breaker and sieve. Incline screw auger to high level hopper and mixer. Delivery system to bag filler where weighing takes place and metal detection before bag filling point. This system comes with a second mobile screw auger for filling 1000kg big bag / sacks Complete with all the controls for the smooth running of this bagging line. After Bagging the bags are sealed with a Saxon Bag Sealer and then stitched with a Singer Bag Stitcher.

Condition: used, Year of construction: 2016, functionality: fully functional, We are offering this used NEWTEC BAG PALLETIZING Chimpal 600 palletizer, year 2016. Lodpfeyzzr Rsx Aiferp Manufacturer: NEWTEC BAG PALLETIZING Model: Chimpal 600 Serial number: A1607 Year of manufacture: 2016 Type: 600.S1000.G067.053.OR3 Description: Palletizing Equipment The system can also palletize Euro pallets 800x1200 mm or CP1 1000x1200 mm. Maximum bag weight: 50 kg Capacity: up to 500 bags per hour Including sheet dispenser The system is currently in operation and can be inspected under working conditions until it is dismantled in September/October 2026. Test palletizing is possible during the summer. Newtec has been acquired by Haver & Böcker. Service for the palletizers is provided from Germany. A connected wrapper can be seen in the pictures, which is also for sale.

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Smurfit Kappa Vitop, ITALY, 2016 Bag filling volume from 1L to 28L Pouch-up filling volume from 1L to 3L Lrjdpfeyr Awbjx Aifop Touch screen control panel The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Easy to operate and maintain Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Suitable for Vitop® Original and Vitop® Compact Simple to adjust between sizes Optional laminar air flow for filling in ultra clean conditions Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.

Condition: used, empty load weight: 6,561 kg, maximum load weight: 32,439 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 04/2027, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 3,065 mm, loading space volume: 102 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,700 mm, color: green, Year of construction: 2023, Equipment: ABS, Tare weight: 6561kg, GVW: 39000kg, DIN EN 12642 (code XL) certificate, Loading area (L W H): 13,530 mm x 2,480 mm x 3,065 mmTyre size: 385/65 R22.5, Loading area volume: 102 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Electronic Brake System EBS, Ferry lashings, 1x15 and 2x7 pin plug, Antispray, Telematics system: Including tyre pressure monitoring system, with subscription., Lashing eyes, 16 pairs, 4t tensile force per eye. Side aperture height 3000mm. 13 pair load restraint straps in roof tracks. 2 x roof mounted load restraint tracks, positioned 180mm inboard of cant rail. Fantastic condition., Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Ledezfqtcepfx Aifsrp

Year of construction: 2013, condition: excellent (used), functionality: fully functional, REF: MM6423 Complete weighing and bagging system which has previously been used to pack frozen peas and vegetarian products into pillow packs. This system comprises of the following equipment: 1 x Infeed swan-neck conveyor with flighted belt mounted on mobile frame (stored outside). Date of manufacture - 2013. Belt width - 245mm wide. 1 x Yamato Scale Dataweigh (UK) Ltd ADW-514AWCC 14-head multi-head weigher with dimple pans. Manufacturer - Yamato Scale Co., Ltd. Speed - up to 120 drops/minute (depending on product and weight). Weighing range - up to 1000g. Rated to IP66 (waterproof). 1 x Gantry unit with steps. Footprint dimensions - 5.7m long x 2.7m wide x 2.72m high. 1 x Gainsborough Engineering Ltd GV2K3 vertical form, fill and seal bagging machine. Manufacturer - Gainsborough Engineering Ltd. Date of manufacture - 2013. Sealing jaws: Horizontal - 360mm wide / Vertical - 420mm long. Packing speed - up to 60 packs/minute (depending on bag size). Bag size range: Smallest - 80mm wide x 80mm long / Largest - 320mm wide x 350mm long. Supplied with jaws for poly and laminate film, block-bottom and gusseted bags as well as 3 x forming tubes. Forming tubes: for forming pillow/’fin-seal’ packs measuring 130mm, 220mm and 270mm wide. Lodpjy Um T Hjfx Aifjrp 1 x Outfeed inclined conveyor. Belt dimensions – 2250mm long x 425mm wide. Outfeed height – 1000mmm. Some spare parts are also included. Videos available on request.

Condition: used, empty load weight: 6,673 kg, maximum load weight: 32,327 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2017, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,765 mm, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,700 mm, color: blue, Year of construction: 2017, Equipment: ABS, Tare weight: 6673kg, GVW: 39000kg, DIN EN 12642 (code XL) certificate, Loading area (L W H): 13,530 mm x 2,480 mm x 2,765 mmTyre size: 385/65 R22.5, Loading area volume: 92 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Electronic Brake System EBS, 1x15 pin plug, Antispray, Roof mounted load restraint tracks. 180mm inboard of cant rail. 13 Pairs of load restraint straps. Blue Schmitz anti slash curtains. New style sideguards. Extra large storage/strap boxes. New MOT at point of sale. 2.7m through the side., Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Lrodpfx Aijzcruwofjp

Condition: used, empty load weight: 7,000 kg, maximum load weight: 32,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 04/2027, loading space length: 13,550 mm, loading space width: 2,460 mm, loading space height: 2,600 mm, loading space volume: 86 m³, color: white, Year of construction: 2024, Tare weight: 7000kg, GVW: 39000kg, DIN EN 12642 (code XL) certificate, Loading area (L W H): 13,550 mm x 2,460 mm x 2,600 mm, Loading area volume: 86 m³, Toolbox, Spare wheel carrier: x 2., Ferry lashings, Sliding roof, UK European couplings., Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Lrjdpfx Aijzmbhgofep

Condition: used, Year of construction: 2023, Coperion Bag House 5, Lrodpfx Aiezl Uaaefop Barkerbille Fan, Heat exchanger,AE Autel SFNBB184F01 Air Pneumatic Filter Receiver, Bag filter Exhaust Fan Sales are conditional subject to seller approval. Successful bidders will be notified within 2 working days.

Condition: good (used), functionality: fully functional, REF: MM6465 1 x OK International Group SuperSealer continuous band sealer on mobile height adjustable stand. Ljdpsznux Uefx Aiforp Manufacturer - OK International Group. Model - SB-40 EU. Serial number - 218-2527-22. Speed - variable, up to 21.3 m/m. Bag material - Heat sealable materials up to 15 mils or 380 microns. Direction - Right to Left. PLEASE NOTE - There are 2 x units available for sale (4,800 EUROS/unit).

Condition: used, maximum load weight: 14,250 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2000, next inspection (TÜV): 08/2026, Equipment: ABS, LEVEN 2-axle platform trailer Lrjdoznft Nspfx Aifsp * First registration: 01/2026 * BPW axles * ABS * Drum brakes * Payload 14,250 kg * Tare weight 3,750 kg * Folding sideboards (4 sides) * Sideboard height 1,000 mm * DuoMatic air coupling * Valid inspection certificate until 08/2026 * German registration documents

Condition: used, mileage: 690,701 km, power: 338 kW (459.55 HP), first registration: 01/2012, fuel type: diesel, axle configuration: 6x2, wheelbase: 5,000 mm, fuel: diesel, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, loading space length: 7,100 mm, loading space width: 2,550 mm, Year of construction: 2011, Equipment: air conditioning, electric window regulation, spoiler, Front axle: Suspension: leaf suspension Rear axle 1: Double wheels; Suspension: air suspension Rear axle 2: Double wheels; Suspension: air suspension Drive: Wheel GVW: 26.000 kg = Additional options and accessories = - Roof spoiler Lredox E Uiwjpfx Aifop

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 1013, REF: MM6216 1 X Comek vertical form, fill and seal bagging machine with Zodiac HS screen Technical specification ⚙️ ✅ Manufacturer - Comek Automatic Packaging Solutions ✅ Model - VPB 330 EVO. ✅ Date of manufacture - 2019. Ledpjxd Ubnefx Aifsrp ✅ Weight - 2,500 Kg ✅ Installed power - 10 Kw ✅ Sealing jaws - 330mm (horizontal) x 460mm (vertical). ✅ Overall dimensions - 2000mm long x 1500mm wide x 1800mm high. Note 🗒️ No printer.