Used Bag Opener for sale (10,701)

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: Djdpeyizxrefx Ag Rekk The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Bag opener, for opening bags such as "yellow bags", etc. Can be used as a stand-alone device or as a system component in e.g. a sorting system. Throughput capacity: 6-7to/h Drive power: approx. 18kW dimensions: 8000x2350x2700mm Weight: 11t Order goods Delivery time approx. 30 weeks Dkodpfx Aedxwlzjg Rok further data and offer on request.

Condition: new, Year of construction: 2026, BULK PRODUCTS BAGGING LINE PUDAS-50NB is designed for automated packaging of bulk products (type of peat, turf, pellets, sand or simillar) by weight • The process is managed via color Touch-screen, multilingual Menu. Dksdpfx Aji El Hrjg Rsk • Suites for dosing into bags from 5 to 50 kg. • Capacity arround 3000 kg/hour. (depending on the product charactersitics and the size of the bags) operated by one person • Power supply 1ph., 230V, 3.2kW • Dimensions: L6.6m x W2.5m x H2.0m Made in Lithuania. CE certified.

Condition: used, Automatic Bag Filling Line Bag weights from 5kg to 1000kg Dedpjyq Tb Iofx Ag Rokk Infeed with product de-clumper / product breakup breaker and sieve. Incline screw auger to high level hopper and mixer. Delivery system to bag filler where weighing takes place and metal detection before bag filling point. This system comes with a second mobile screw auger for filling 1000kg big bag / sacks Complete with all the controls for the smooth running of this bagging line. After Bagging the bags are sealed with a Saxon Bag Sealer and then stitched with a Singer Bag Stitcher.

Condition: good (used), Saxon Bag Sealer With Reverse Facility With Top Bag Cutter With Hydraulic Lift Mast Stainless Steel Dodpjv Dm Epsfx Ag Rskk 230 Volt Power Supply

Condition: good (used), Saxon Bag Sealer Stainless Steel Dedpfxsv Dm Dle Ag Rjkk With Stainless Steel Conveyor 230 Volts Single Phase Power Height adjustable mast Mobile on castors Fixed adjustable feet also Conveyor belt dimensions 1500mm L x 400mm W

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Smurfit Kappa Vitop, ITALY, 2016 Bag filling volume from 1L to 28L Pouch-up filling volume from 1L to 3L Touch screen control panel The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Dedpfsyr Awbjx Ag Rjkk Easy to operate and maintain Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Suitable for Vitop® Original and Vitop® Compact Simple to adjust between sizes Optional laminar air flow for filling in ultra clean conditions Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, bag dust filter Bag dust filter tower 4kw 9 bag extractor 3200m3/h 9 bag dust filter extractor in excellent condition for sale. Dsdpfxsydp Nuj Ag Rokk radial fan: Filli ferrari 4kw 9 pieces of EMTEX textile dust filter bags, 250mm x 1650mm/pc Outlet diameter: 600mm Inlet diameter: 260mm built-in vibratory shaker. 0.18kw. structure: galvanized steel casing, steel frame. height: 3800mm width: 1150mm

Condition: used, empty load weight: 6,711 kg, maximum load weight: 32,289 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 12/2016, next inspection (TÜV): 07/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,580 mm, loading space volume: 87 m³, suspension: air, tire size: 385/65 R22,5, color: blue, Year of construction: 2016, Equipment: ABS, Tare weight: 6711kg, GVW: 39000kg, DIN EN 12642 (code XL) certificate, Loading area (L W H): 13,620 mm x 2,480 mm x 2,580 mmTyre size: 385/65 R22.5, Loading area volume: 87 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Electronic Brake System EBS, Toolbox, Ferry lashings, Sliding roof, Hubodometer, 1x15 and 2x7 pin plug, Antispray, Coil well 7200/320/1250mm, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Dsdpfx Agoyx Rmxo Rskk

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 6,941 kg, axle configuration: 3 axles, first registration: 02/2019, total length: 13,600 mm, total width: 2,480 mm, suspension: air, color: white, Year of construction: 2019, Equipment: full service history, power assisted steering, Technical specifications Axeles producer - SCHMITZ ROTOS Air suspension SCB sliding roof, Sliding roof also sliding to rear 2 plastic toolbox with cover holder, sleeves and drawer behind the units 8 Rows Wooden rigging boards EBS 2S/2M, with roll stability program ROTOS SCB running gear (disc brakes) Bolted basket-type spare wheel holder for 2 spare wheels behind unit Anti-theft rope through the curtain buckles+holder on front bulkhead 6 tyres - 385/65R22.5 (11.75x19.5) Dedpfx Aoyzdqpeg Rokk Internal Length/width/heigth - 1362 cm / 248 cm / 283 cm Payload - 28 300 kg Gross weight - 39 000 kg Total tare weight - 6692 kg 3 axles Lashing holes starting in the outer frame beginning from the first side post Pallet stop straight, on both sides on outer frame 19 mm high 4 pairs ferry hold shakles 2 wheel chocks with holders Load securing: Body cert. acc. To EN 12642 XL Full height ALU double hinged door double integral lock rods 28 mm phenolic plywood floor, max 7100 kg forklift axle load tested to DIN EN 283

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 6,941 kg, axle configuration: 3 axles, first registration: 05/2019, total length: 13,600 mm, total width: 2,480 mm, suspension: air, color: white, Year of construction: 2019, Equipment: full service history, power assisted steering, Technical specifications Axeles producer - SCHMITZ ROTOS Air suspension SCB sliding roof, Sliding roof also sliding to rear 2 plastic toolbox with cover holder, sleeves and drawer behind the units 8 Rows Wooden rigging boards EBS 2S/2M, with roll stability program ROTOS SCB running gear (disc brakes) Bolted basket-type spare wheel holder for 2 spare wheels behind unit Anti-theft rope through the curtain buckles+holder on front bulkhead 6 tyres - 385/65R22.5 (11.75x19.5) Internal Length/width/heigth - 1362 cm / 248 cm / 283 cm Payload - 28 300 kg Gross weight - 39 000 kg Dodpfxsyzdado Ag Rskk Total tare weight - 6692 kg 3 axles Lashing holes starting in the outer frame beginning from the first side post Pallet stop straight, on both sides on outer frame 19 mm high 4 pairs ferry hold shakles 2 wheel chocks with holders Load securing: Body cert. acc. To EN 12642 XL Full height ALU double hinged door double integral lock rods 28 mm phenolic plywood floor, max 7100 kg forklift axle load tested to DIN EN 283

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Capa­ci­ty: Up to 10 pou­ches / min. Dksdox Utd Espfx Ag Rsk Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling.

Condition: used, empty load weight: 6,561 kg, maximum load weight: 32,439 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 3,065 mm, loading space volume: 102 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,700 mm, color: green, Year of construction: 2023, Equipment: ABS, Tare weight: 6561kg, GVW: 39000kg, DIN EN 12642 (code XL) certificate, Loading area (L W H): 13,530 mm x 2,480 mm x 3,065 mmTyre size: 385/65 R22.5, Loading area volume: 102 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Electronic Brake System EBS, Ferry lashings, 1x15 and 2x7 pin plug, Antispray, Telematics system: Including tyre pressure monitoring system, with subscription., Lashing eyes, 16 pairs, 4t tensile force per eye. Side aperture height 3000mm. 13 pair load restraint straps in roof tracks. 2 x roof mounted load restraint tracks, positioned 180mm inboard of cant rail., Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Djdpfeywpbxex Ag Rskk

Condition: good (used), Grinding media, ceramic grinding media, polishing media for vibratory finishing machines, vibratory finishing machines, vibratory finishing machines, vibratory finishing machines, continuous vibrators -Manufacturer: Rösler, Ceramic grinding wheels type RS 40/40 2 bags -Contents: 25 kg/bag -Price/Sale: complete -Transport dimensions: 400/380/H400 mm Dkodsink Tispfx Ag Rek -Total weight: 50 kg

Condition: good (used), pressing force: 150 t, Hammer weight: 150 kg Stroke: 480 mm Dodeubb Stopfx Ag Rjkk Strokes: 168 p/min. Throat: 375 mm Ram diameter: 180 mm Country of origin: UK Motor power: 11 kW Machine LxWxH: 200 x 180 x 240 cm Machine weight: 6000 kg

Condition: used, axle configuration: 3 axles, first registration: 12/2011, loading space length: 7,140 mm, loading space width: 2,450 mm, loading space height: 2,600 mm, suspension: air, tire size: 265/70R19,5, wheelbase: 3,250 mm, Year of construction: 2011, Suspension: air suspension Axle 1: Tyre size: 265/70R19,5; Double wheels Axle 2: Tyre size: 265/70R19,5; Double wheels Dksdpfeyzptcjx Ag Rjk Axle 3: Tyre size: 265/70R22,5; Double wheels Drive: Wheel Empty weight: 6.220 kg Carrying capacity: 19.780 kg GVW: 26.000 kg Make of bodywork: LECITRAILER

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Complete 'Bag-in-Bag' forming system, previously used to produce multipacks of crisps. Dodpfjyvac Aex Ag Rokk System comprises of: 1 x Feed hopper and steps/gantry. 1 x Comek s.r.l. infeed swan-neck / 'Z' conveyor. 1 x Comek s.r.l. / Propema VPB 400 vertical form, fill and seal bagging machine. Serial number – 0516. Date of manufacture – 2014. Sealing jaws - 380mm horizontal & 620mm vertical. Film width - up to 810mm wide. 1 x Markem Imaje SmartDate X65 128mm thermal transfer printer. Serial number – GP21062420 & GJ21063019. Date of manufacture – 2021. 1 x Flash label applicator (never used / required for seller's products). 1 x Hole punch (3mm) to help deflate the multipack bags into large boxes. 1 x Comek s.r.l. outfeed inclined conveyor. Belt width - 400mm wide. Conveyor length - 1800mm long. 1 x 1.2m diameter stainless-steel Lazy Susan / rotary packing table. Height - 750mm (height-adjustable feet). This system was producing bulk multipack bags of 3 x different flavours of bags of crisps. Speed - up to 18 packs/minute. Footprint of system - 7.3m long x 2.7m wide x 3.5m high (infeed conveyor to lazy susan).

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 6,783 kg, axle configuration: 3 axles, first registration: 09/2021, total length: 13,620 mm, total width: 2,480 mm, suspension: air, color: white, Year of construction: 2021, Equipment: full service history, power assisted steering, Technical specifications Dkedpfx Ageyx R Tfe Rok Mega VARIOS ROTOS SCB running gear (disc brakes) SCHMITZ sliding roof VARIOS 180mm depth 2480mm internal width, lifting rear header 7 x Row(s) alu support laths with connection profile Superstructure 3x divided Without international custom seal (TIR) 7 tyres - 385/55R22.5 Length - 13.620 mm Width - 2.480 mm Height - 3.976 mm Plastic toolbox with cover holder, sleeves and drawer behind the unit

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-3A, The VOGEL MH-FJ-3A carton sealing machine is equipped with a lid sealing mechanism, i.e. the cartons can be fed in an open state. The short and long lid parts of the carton are closed first, only then is the carton glued. Carton formats: Length 150 - 600 mm Width: 115 - 490 mm Height: 110 - 510 mm Technical data: Length 1,800 mm Dedpjyyvz Rjfx Ag Rokk Width 880 mm Weight 300 kg Operating voltage 220 V Air 5 kg/cm2 CE marking IMPORTANT: An air pressure supply is required to operate the machine, which is not included in the scope of delivery. Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: excellent (used), Year of construction: 2016, Complete line for packing products like flour, semolina etc into small, fold top paper bags. Was installed new in 2017. Photos show the machine set-up for potatoes. Price of machine without potato weigher is EUR 25,000 Dedjttwt Aopfx Ag Rekk

Condition: new, functionality: fully functional, Features of the Unit 1. Chain conveyor belt, 2 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotative end sealing unit, double sealing jaw 5. Robust, central fin seal structure 6. Three servo-controlled drives 7. HMI control panel 8. Two individual temperature controllers 9. Housing made of 304 stainless steel 10. Documentation in the local language 11. Print mark control 12. Programmable bag length 13. Standard running direction: left to right Dodpfx Agsydqaho Rskk Technical Specifications 1. Product length: L90–300 mm 2. Product width: W30–160 mm 3. Product height: H5–55 mm 4. Packaging speed: up to 125 products/min (depending on product, bag length, material, and number of sealing jaws) 5. Maximum film width: 370 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 6.5 kW 8. Machine weight: approx. 400 kg 9. Machine dimensions: approx. 3500 x 950 x 1450 mm

Condition: excellent (used), functionality: fully functional, Factory closure for mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Dkedpfoxqgffsx Ag Rek

Condition: used, tank capacity: 200 l, GENERAL Design: rectangular Overall width: 835 mm Overall height: 410 mm Overall length: 1,235 mm Top: open Other: Material: HD-PE Manufacturer: asecos General Building Authority Approval Approval No.: Z-40.22-252 Load capacity: 500 kg with evenly distributed load Internal height: 280 mm Weight: 26 kg/each Type plate missing for 6 units Dsdpfeyci Hdox Ag Rskk Tubs can be nested when empty Individual tubs may have minor damage on the corners (see photos) Location: Bremen Type plate: Volume: 200 liters Product-contact material: plastic Condition: used FEATURES Outlet: not available

Condition: used, tank capacity: 200 l, GENERAL INFORMATION Dksdpfx Ajyck I Aog Rek Remarks: Internal dimensions approx. 1,000 x 1,000 mm; internal height approx. 190 mm (slight slope towards outlet); small dents in the bottom (see photos) Total width: 1,400 mm Total height: 250 mm Total length: 1,380 mm Top: open Location: Bremen Volume: 200 litres Product contact material: V2A 1.4301 (AISI304) Condition: used EQUIPMENT Outlet: DN50 DIN 11851

Condition: used, tank capacity: 2,800 l, GENERAL Design: vertical External diameter: 1,210 mm Overall height: 3,080 mm Top: open Location: outdoor storage Volume: 2,800 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,500 mm TANK Support design: feet Number of feet: 4 pcs EQUIPMENT Outlet: available Dksdpfxjyci N Eo Ag Rok MATERIAL SPECIFICATION Feet material: steel