Used Ball Bearing for sale (5,391)

Condition: new, R425-1G4S7 NSK TAPERED SINGLE ROW ROLLER BEARINGS Gujdoqpf T Ispfx Al Doh NEW, NEVER USED Main Demensions: 425 x 700 x 150 mm Weight 216 kg 2 units available WAREHOUSE LIQUIDATION

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF300LH is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 300 kg. Due to the compact design and low height of under 2 meters this baler is perfect for rooms with limited ceiling heights. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 20 Ton Bale weight: up to 300 kg (material depending) Bale size: 1100 H (var.) x 1200 W x 800 D mm Machine size: 1986 H x 1800 W x 1100 D mm Machine weight: 1140 kg Transport height: 1986 mm Loading aperture: 1200 W x 600 H mm Cycle times: 45 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB Auto control panel with bale full light and E-stop with locking key Strap eject for easy removal of bales Retainer for reducing the material spring back Low height, perfect for limited ceiling heights Hour counter Reel holder for 4 rolls of strapping A quality product “Made in Europe” Godpfx Asiwgcmsl Deuh Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: new, Bosch EXT.BALL.SWITCH, part no. 1070077421-103, serial no. 001706154, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gsdpsi D T U Aefx Al Dsuh

Condition: used, Year of construction: 2022, Bale fork M140 EURO Zinc set 2PCS 820 mm KON2 Zinc set 2 PCS 1240 mm KON2 / Gusdpstrdl Esfx Al Doh

Condition: used, Manufacturer: EDA Gusdpfx Aleyq Nrce Doh Overall dimensions: 6600x1400x(1700 mm high) The equipment is not operational; it does not work due to a hydraulic issue!

Condition: used, empty load weight: 1,550 kg, maximum load weight: 7,450 kg, overall weight: 9,000 kg, axle configuration: 1 axle, first registration: 10/2021, suspension: steel, tire size: 385/65 22,5, tire condition: 90 %, color: yellow, Year of construction: 2021, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 40325 Goldhofer, ballast trailer Godoynrv Espfx Al Dsuh * Year of manufacture: 2021 * Air connection coupling head (red + yellow) * Connection plug: 2x 7-pin * Suspension: leaf spring * Gross vehicle weight: 9,000 kg * Unladen weight: 1,550 kg * Payload capacity: 7,450 kg * Permissible total weight: 9,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 90% -- 90% (tire size: 385/65 R22.5) * Tire sizes: 385/65 R22.5 * Manufacturer: Eggers ZX 9E * 50 mm towing eye Disclaimer: Specifications and details subject to change, prior sale, and errors excepted. You can find more photos and videos on our website. Our comprehensive services include, for example: * Purchase, sale, and rental of commercial vehicles * Fast, straightforward financing solutions * Processing of all (export) documentation * Ordering export and customs number plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections and registration service * Transfer/delivery of commercial vehicles Please contact our trained staff. We will be happy to advise you.

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF200MK is the ideal multi chamber waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 200 kg. Various materials can be collected into two or more chambers installed next to each other and once a chamber is filled the rollable compaction head will be moved over and the material can be baled. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 16 Ton Bale weight: up to 200 kg (material depending) Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine size: 2506 H x 3260 W x 1269 D mm Machine weight: 1400 kg Transport height: 2506 mm Loading aperture: 1100 W x 800 H mm Cycle times: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Short processing time because there is always a chamber available for loading Retainer for reducing the material spring back Reel holder for 8 rolls of strapping A quality product “Made in Europe” Suitable for compacting Gedpfxjvugz Ej Al Deuh Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Extra chamber (up to 6 chambers in total) Strapping rolls Twin Chamber Waste Baler, Multi Chamber Waste Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF450HD special waste baler is the ideal baler for compacting difficult materials such as PET bottles, food cans and metal containers, big bags, plastic canisters and plastic packaging, but also scrap tyres and car bumpers can be reduced to a minimum of volume with the baler. The special baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Gedpfxevug Ekj Al Dsuh Pressing force: 30 Ton Bale weight: up to 450 kg (material depending) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine size: 3343 H x 1781 W x 1196 D mm Machine weight: 1600 kg Transport height: 2300 mm Loading aperture: 1200 W x 680 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Extra-long dual cylinders for even and early compaction of the material User-friendly lever control Bale kicker for easy eject the bales Extra retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting PET bottles Food cans and sheet metal containers Canisters and plastic containers / packaging Scrap tyres and car bumpers Big bags Cardboard and plastic film / foils Other difficult valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls / bale wire Motor 11 kW 32 Amp Demo-Video shows BTS-MF550HD Special Waste Baler. Can Baler, Can Waste Baler, PET Baler, PET Compactor, Tyre Baler, Tire Baler, Scrap Tyre Baler, Scrap Tire Baler, Tyre Compactor, Tire Compactor, Can Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: new, machine/vehicle number: 10463, The AR series are slow-running machines. They are available with 2, 4, 6, or 8 screw shafts. Each screw unit is installed independently and separately in the chassis. Guodeyr Ti Iopfx Al Djh Screw shredders are designed for the shredding of brittle materials (wood, paper, gypsum, mineral wool, etc.). The machines are largely insensitive to contaminants such as glass, metal parts, stones, etc. The AR series is optimally suited for use as a bale opener, e.g., for PET bottle bales.

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 11,600 kg, permissible axle load (axle 2): 11,600 kg, permissible axle load (axle 3): 11,600 kg, first registration: 10/1999, loading space length: 12,800 mm, loading space width: 2,550 mm, loading space height: 2,600 mm, total length: 12,800 mm, total width: 2,550 mm, suspension: air, tire size: 275/70-R22.5, wheelbase: 7,830 mm, color: other, Year of construction: 1999, Equipment: ABS, = Additional Options and Accessories = - BPW axles - Drum brakes - Central lubrication system = Notes = Beautiful 1999, 4-axle NOOTEBOOM OVB-73-04 dump trailer. Axles 2, 3, and 4 are hydraulically steerable. BPW axles with drum brakes, hardwood floor, 2 x 10 stakes, 2 x 5 lashing points, central lubrication system, 3.5" kingpin, hydraulically sprung. Unladen weight: 12,360 kg, permissible total weight: 71,400 kg (technically 89,250 kg), twin tires at the rear with tires of size 275/70-R22.5 (tread depth left: 11/15, 13/9, 11/13, 11/10 mm; tread depth right: 10/12, 12/13, 13/13, 10/11 mm), Belgian registration with a valid technical inspection until 01.12.2026. = Additional Information = Axle configuration Tire size: 275/70-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Max. axle load: 11,600 kg; Tire tread depth left (inside): 95%; Tire tread depth left (outside): 70%; Tire tread depth right (inside): 75%; Tire tread depth right (outside): 60% Rear axle 2: Twin tires; Max. axle load: 11,600 kg; Steerable; Tire tread depth left (inside): 55%; Tire tread depth left (outside): 80%; Tire tread depth right (inside): 80%; Tire tread depth right (outside): 75% Rear axle 3: Twin tires; Max. axle load: 11,600 kg; Steerable; Tire tread depth left (inside): 80%; Tire tread depth left (outside): 70%; Tire tread depth right (inside): 80%; Tire tread depth right (outside): 80% Rear axle 4: Twin tires; Max. axle load: 11,600 kg; Steerable; Tire tread depth left (inside): 60%; Tire tread depth left (outside): 70%; Tire tread depth right (inside): 70%; Tire tread depth right (outside): 60% Weights Unladen weight: 12,360 kg Payload: 59,038 kg GVW: 71,400 kg Functional Body brand: Nooteboom OVB-73-04 Gusdpfx Aozxgc Tol Djh Maintenance, History, and Condition APK (Technical Inspection): valid until 12/2026 Technical condition: very good Optical condition: very good Additional information Please contact Arne Honingh for further information.

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 11,600 kg, permissible axle load (axle 2): 11,600 kg, permissible axle load (axle 3): 11,600 kg, first registration: 10/1999, loading space length: 12,800 mm, loading space width: 2,550 mm, loading space height: 2,600 mm, total length: 12,800 mm, total width: 2,550 mm, suspension: air, tire size: 275/70-R22.5, wheelbase: 7,830 mm, color: other, Year of construction: 1999, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS (Electronic Braking System) - Drum brakes - Central lubrication system = Notes = Nice 1999 NOOTEBOOM OVB-73-04 4-axle BALLAST TRAILER, axles 2, 3, and 4 are hydraulically steered, BPW axles with drum brakes, hardwood floor, 2 x 10 stake pockets + 13 stakes, 2 x 5 tie-down points, central lubrication system, 3.5" kingpin, hydraulically suspended. Unladen weight: 13,380 kg, permissible total weight: 71,400 kg, dual air tires with 275/70 -R22.5 tires (L: 10/10, 13/6, 9/6, 9/10mm; R: 5/14, 12/11, 12/12, 11/11mm), Belgian registration with valid technical inspection until [date]. = Further Information = Axle configuration Tire size: 275/70-R22.5 Axle brand: BPW Eco-Plus Guodszxgdkjpfx Al Djh Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; Max. axle load: 11,600 kg; Tire tread depth left inside: 62%; Tire tread depth left outside: 62%; Tire tread depth right inside: 88%; Tire tread depth right outside: 32% Rear axle 2: Dual tires; Max. axle load: 11,600 kg; Steered; Tire tread depth left inside: 81%; Tire tread depth left outside: 38%; Tire tread depth right inside: 69%; Tire tread depth right outside: 75% Rear axle 3: Dual tires; Max. axle load: 11,600 kg; Steered; Tire tread depth left inside: 32%; Tire tread depth left outside: 56%; Tire tread depth right inside: 75%; Tire tread depth right outside: 75% Rear axle 4: Dual tires; Max. axle load: 11,600 kg; Steered; Tire tread depth left inside: 62%; Tire tread depth left outside: 56%; Tire tread depth right inside: 63%; Tire tread depth right outside: 68% Weights Unladen weight: 13,380 kg Payload: 59,940 kg GVWR (Gross Vehicle Weight Rating): 71,400 kg Functional Body brand: Nooteboom OVB-73-04 Maintenance, History, and Condition APK (Technical Inspection): valid until 03/2027 Technical condition: good Optical condition: good Identification License plate: QATG848 Further Information Please contact Arne Honingh for further information.

Condition: used, functionality: fully functional, Year of construction: 2013, Gallignani baling press Gusdpfx Aszb I Nhel Doh Subject to prior sale – all information is provided without warranty. We cannot guarantee the accuracy or completeness of the information provided here. Any warranty and/or liability is excluded. Deviations from the description above cannot be ruled out. We would like to point out that the subject of the purchase agreement to be concluded will be exclusively the motor vehicle in its actual condition.

Condition: new, Year of construction: 2020, Storage location number: 100294001 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Avant round bale fork Width: 1220mm Length: 1150mm Weight approx. 50kg Gsdpfx Alezk Aa Ee Dsuh Suitable for Avant models 320S and newer Year of manufacture: 2020 Location: Nuremberg

Condition: used, mileage: 12,141 km, power: 132 kW (179.47 HP), first registration: 10/2025, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 10/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, LED lighting, rear step over half the width, rear wing doors without window cut-outs, sliding door on the right, multifunction steering wheel, double passenger seat bench, hill start emergency braking lane change side wind assistant, reversing camera, DAB+, USB data socket only, MAN Media Van, cell phone interface, winter package, wooden floor in the load compartment with rear loading edge protection, C-rails on the side walls, partition wall with sliding window, lashing eyes Guodpjy Hfaisfx Al Doh

Condition: used, Year of construction: 2010, functionality: limited functionality, pressing force: 110 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale length: 1,200 mm, bale height: 800 mm, bale weight: 500 kg, type of input current: three-phase, input voltage: 400 V, input current: 161 A, overall weight: 36,000 kg, oil tank capacity: 1,500 l, power: 90 kW (122.37 HP), input frequency: 50 Hz, Equipment: documentation/manual, We are offering this used EUROPRESS channel baling press, model 8300 V 5 K, manufactured in 2010. Type: Channel baling press 8300 V 5 K Factory number: 10060294 Drawing number: 2300000 Gjdpezwpdwofx Al Dsuh Year of manufacture: 2010 Weight: approx. 36,000 kg Rated voltage: 3 x 400 V / 50 Hz Drive power: 90 kW Rated current: approx. 161 A If you have any questions or require further information, please feel free to send us a message or call us.

Condition: refurbished (used), Verbufa Handtmann Burger & MeatBalls MBF-1 Guedpfx Aszi Aknjl Doh

Condition: new, maximum load weight: 63,960 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis * Welded construction made of high-quality steel profiles with continuous profile crossmembers * Designed for high point loads * Outer frame made of UNP steel Fifth Wheel Coupling * 2-inch kingpin Under-ride Protection * Compliant with EC standards, bolted design Side Under-run Protection * Compliant with EC standards Landing Gear * With single-side operation on the right * Support load approx. 66 t / lifting capacity approx. 24 t. Axles * 5 x 10 t air suspension axle assembly * Manufacturer: SAF * With drum brake approx. 400x200 mm * ABS, AGS * Wheel connection centrally mounted, 10-hole with ET 0 * Total air suspension travel approx. 200 mm * Of which lifting approx. 140 mm and lowering approx. 60 mm * Control via rotary slide valve with detent function Steering * 1 axle with trailing steering * 2nd axle fixed * 3rd, 4th and 5th axles with forced steering via tie rod * Lubrication points of swivel bearing centrally located outwards * Axle lift: first and second axles automatically liftable * With additional shutdown on the chassis Braking System * Two-circuit compressed air braking system compliant with EC with EBS and RSS * Automatic load-dependent regulation * Manufacturer: Wabco. * Spring-loaded cylinders as parking brake * Interchangeable secured coupling heads firmly mounted on the front cross member * Without connecting line to the tractor unit * Aluminum air tank Tires * 10x 445/65 R22.5 164J on rim 14.00 x 22.5 ET 0 * Manufacturer of our choice * TPMS: Tire pressure monitoring system TPMS according to ECE R141 * With data transmission to the tractor unit Fenders * Compliant with EC standards, 1st axle at the front, 2nd axle at the rear * 3rd, 4th and 5th axles each one 1/4 PVC fender at the front and rear * Rear fender with mud flaps. Load securing * 5 pairs of folding lashing rings * Evenly distributed (tensile force approx. 24.5 t) * 11 pairs of hook plates welded into the outer frame (tensile force approx. 3 t) * 10 pairs of lashing rings in the outer frame on the side, evenly distributed (tensile force approx. 10 t) * Recess pockets: - 10 pairs of recess pockets recessed in the outer frame * 6 pairs of recess pockets recessed in the floor (on the outside of the longitudinal beam) Gsdpfxez Dmnds Al Douh * Stake pockets: - 16 pieces of galvanized stake pockets, approx. 80x80x8 mm, approx. 850 mm usable length (with locking mechanism) * Stake magazine: one magazine for 8 pieces each on each side in front of the front wall * Stake pockets approx. 80/80 mm Front Wall * Bolted corner stakes with a steel approach plate over the entire width and height. Floor * Approx. 28 mm Z-hardwood floor recessed in the outer frame flush Lighting System * Compliant with EC standards, 24 volt with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline lights at the rear * License plate lights. 1x15 and 2x7-pole. Plug connection on the front cross member Equipment * Outrigger with holder, double * Warning sign according to ECE 70 * Work lights on the lamp carrier (switched via reverse gear) * Holder for rotating beacon at the rear (incl. rotating beacon) * One climbing ladder each side fixed including pluggable climbing aid - * Smart Board * Sticker "Vehicle swings out" * Sticker "Center of gra

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 07/1992, total length: 7,800 mm, total width: 2,500 mm, suspension: air, tire size: 265/70-R19.5, wheelbase: 3,100 mm, Year of construction: 1992, Very nice 1992 LAG 2-axle BALLAST trailer with SAF axles and drum brakes, loading area dimensions: 495 x 250 cm, loading area height: approx. 107 cm, dual tires at the rear with 265/70-R19.5 tires (tread depth left: 6/8, 9/8 mm; tread depth right: 7/10, 12/12 mm), unladen weight: 4,010 kg, permissible total weight: 20,000 kg, Dutch registration with a valid periodic technical inspection (APK) until 02.12.2026 = Further information = Axle configuration Tire size: 265/70-R19.5 Axle brand: SAF DRUM Brakes: Drum brakes Suspension: Air suspension Front axle: Dual tires; Max. axle load: 10,000 kg; Steerable; Tire tread depth left inside: 50%; Tire tread depth left outside: 40%; Tire tread depth right inside: 60%; Tire tread depth right outside: 45% Rear axle: Dual tires; Max. axle load: 10,000 kg; Tire tread depth left inside: 50%; Tire tread depth left outside: 55%; Tire tread depth right inside: 75%; Tire tread depth right outside: 75% Weights Unladen weight: 4,010 kg Payload: 15,990 kg GVWR: 20,000 kg Gsdpfx Ajz Nl T Rsl Douh Maintenance, history and condition APK (Periodic Technical Inspection): valid until 12/2026 Technical condition: very good Optical condition: very good Identification License plate: WJ-62-BZ Further information Please contact Arne Honingh for more information.

Condition: used, Year of construction: 2006, functionality: fully functional, total length: 6,150 mm, total width: 2,470 mm, total height: 2,065 mm, overall weight: 13,000 kg, input voltage: 400 V, Equipment: emergency stop, STADLER STT 5000 Ballistic Separator – Year of Manufacture 2006 – Shafts Renewed 12/2025 For sale is a ballistic separator from the manufacturer STADLER, type STT 5000, year of manufacture 2006, from our existing commercial waste sorting plant. The machine was used for the mechanical separation of waste fractions and was regularly maintained during ongoing operation. The following maintenance measures are particularly noteworthy: - All shafts of the ballistic separator were renewed in December 2025. - A corresponding invoice for the shaft replacement is available. - The paddle coverings were regularly replaced. - Instead of the originally installed plastic paddle coverings, paddle coverings made of sheet metal are now installed. Technical Data: - Manufacturer: STADLER - Type: STT 5000 - Year of Manufacture: 2006 - Overall Length: approx. 6,150 mm - Overall Width incl. Motor: approx. 2,470 mm - Overall Height: approx. 2,065 mm - Overall Weight: approx. 13,000 kg - Number of Paddles: 6 - Paddle Length: 5,050 mm - Motor Power: 11 kW - Design Capacity: 12 t/h - Design Volumetric Flow: 80 m³/h Gedpfx Alez R Sfwe Dsuh The ballistic separator is part of our existing sorting plant, which is being rebuilt as part of a comprehensive plant modernization. An on-site inspection is possible after prior appointment. Technical documents as well as proof of the maintenance measures carried out can be provided upon request. Price on request. If you are interested or have any further questions, we look forward to hearing from you.

Condition: new, Year of construction: 2026, Optimum Optisaw SD 500 Double miter metal bandsaw with swiveling saw blade Art. No. 3292380 Length approx. 2122 mm Width/Depth approx. 1046 mm Height approx. 1497 mm Weight approx. 522 kg Electrical data Motor power, coolant pump 100 W Total connected load 3.8 kW Connection voltage 400 V Mains frequency 50 Hz Machine data Saw blade speed(s) 35 / 70 m/min Saw blade length 3770 mm Saw blade width 34 mm Saw blade thickness 1.1 mm Cutting angle 45 – -60 ° Feed Hydraulic via lowering cylinder Raising the saw blade manually Cutting ranges 0° round (solid material) 355 mm 0° square (solid material) 280 mm 0° rectangular, vertical (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangular, vertical (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm +45° rectangular, vertical (solid material) 280 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangular, vertical (solid material) 180 x 220 mm Heavy-duty industrial design Low-noise operation High cutting accuracy due to vibration-free operation Miter adjustment from -45° to 60° by swiveling the entire saw blade Supplied as standard with high-quality bi-metal saw blade Gujdsgd Si Eopfx Al Deh Microswitch for automatic end shut-off Coolant pump Ball-bearing saw blade guide with carbide inserts for optimal cutting results Easy adjustment of the lowering speed by means of a flow control valve in the control panel Large, quick-release vice, laterally adjustable Clear control panel Location: In stock, 54634 Bitburg - immediately available -

Condition: good (used), KSB Etaline GN G10 Pump Inline pumps and three-phase standard motor with a motor-mounted frequency converter for stepless speed control. Applications: Heating systems Gujded Sqkzjpfx Al Doh Air conditioning systems Domestic water systems Water supply Industrial circulation systems Fluid Liquids that do not chemically or mechanically attack the pump materials. Operating data Q 17.50 m3/h H 5.8 m Please refer to the data sheet for further information on this pump. 1) The sum of the inlet pressure and the delivery head at zero flow rate must not exceed the specified value. Design Block pump in inline design, with speed-controlled standard motor, pump and motor shaft are rigidly connected. Bearings Deep groove ball bearings, grease-lubricated. Shaft seal Uncooled and maintenance-free mechanical seal according to EN 12 756 Pump series: Etaline Material combination: Gray cast iron Standard motor and stub shaft Frame size designation: 65 Nominal size of suction/pressure nozzle: 160 Further technical data can be found in the data sheet. Item condition: used Scope of delivery: 1 x KSB Etaline GN G10 pump

Condition: good (used), KSB Etaline GN G11 centrifugal pump Inline centrifugal pump and three-phase standard motor with a motor-mounted frequency converter for stepless speed control. Applications: Heating systems Air conditioning systems Domestic water systems Water supply Industrial circulation systems Fluid Liquids that do not chemically or mechanically attack the pump materials. Operating data Q up to, see data sheet H up to, see data sheet The data for this pump can be found in the data sheet. 1) The sum of the inlet pressure and the head at the zero flow point must not exceed the stated value. Design Block pump in inline design, with a speed-controlled standard motor; the pump and motor shafts are rigidly connected. Bearings Deep groove ball bearings, grease-lubricated. Shaft seal Gedpfeiu U Txsx Al Deuh Uncooled and maintenance-free mechanical seal according to EN 12 756. Pump series: Etaline Material combination: Gray cast iron Standard motor and stub shaft Frame size designation: 80 Nominal size suction/discharge nozzle 210 Further technical data can be found in the data sheet. Item condition: used Scope of delivery: 1 x KSB pump Etaline GN G11

Condition: new, IBC 71940.E.T.P2H.QBCM angular ball bearing set = 4 pieces, unused in original packaging, 100% functional, scope of delivery as shown in the photos. Godpfx Aei Ea Tqsl Dsuh

Condition: new, IBC 71940.E.T.P2H.QBCM angular ball bearing set = 4 pieces, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Gusdpfx Aji Ea Tusl Deh

Condition: used, maximum load weight: 24,500 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 01/1995, Year of construction: 1995, Equipment: ABS, BABELSBERGER SSA 51 SAF AXLE BALLAST 14 TIRE SETS 1ST HAND? ----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT Gjdpfx Aljtvt A Te Djuh * TYPE: SSA 51 / 124/1 * BALLAST TRAILER * 3 AXLES * DRUM BRAKES * AIR SUSPENSION * 14 TIRE SETS * LOAD SECURING LASHING POINTS * TIRE SIZE: 445 / 65 R 22.5 * PERMISSIBLE TOTAL WEIGHT: 34,000 KG * UNLADEN WEIGHT: 9,500 KG * PAYLOAD: 24,500 KG * IMMEDIATELY READY FOR USE * EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ * EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ ----EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS REGISTRATION, AND 17 - 21 DAYS AUSTRIA REGISTRATION EURO 1 VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Subject to changes, errors and prior sale! You can find more vehicles on our website: Sales are made exclusively according to our general terms and conditions – see website. Important note – important information: Despite careful checking of all details in our offer, it may happen that errors occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.