Used Calibration Ball for sale (4,151)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Success:
Your message has been sent.
Auction
Ends in
d
h
min
s
Auction ended
Sachsen
1,236 km
Measuring arm
HexagonAbsolute Arm RA-7312
Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7312 - 3089 - FA, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,200 mm, TECHNICAL DETAILS
Iiodpfx Aas Afhr Tsisi
Measuring range: 1,200 mm
Standard: ISO 10360-2
MPEp: 8 µm
MPEE: 5 + L/40 µm
Travel range X-axis: 1,200 mm
Travel range Y-axis: 1,200 mm
Travel range Z-axis: 1,200 mm
Measuring range X-axis: 1,200 mm
Measuring range Y-axis: 1,200 mm
Measuring range Z-axis: 1,200 mm
MACHINE DETAILS
Input voltage: 220 V
Type of current: Alternating current (AC)
Arm weight: 10.2 kg
Total weight incl. transport box: approx. 20 kg
Transport box length: 850 mm
Transport box width: 550 mm
Transport box height: 350 mm
Last calibration: 01/11/2022
Notebook
Model: HP ZBook Workstation
Processor: Intel Core i7
RAM: 16 GB
Graphics card: NVIDIA
Hard drive: SSD
EQUIPMENT
PolyWorks Metrology Suite 2025 IR10.2
PolyWorks Inspector Probing
Transferable USB dongle license
Absolute encoder technology
Integrated digital camera
Integrated work light
Haptic feedback
Ergonomic handle
Zero-G balancing weight
Mounting plate
TESA TKJ
Probe with 3 mm ruby ball
Probe with 6 mm ruby ball
Probe with 15 mm steel ball
Certified test bar for 1,200 mm measuring range
Test bar length: 305 mm
Calibration sphere
Magnetic anchor
Original transport case
Dust cover
B89 certificate
Factory calibration documents
Calibration certificate
Testing documents
Success:
Your message has been sent.
Auction
Ends in
d
h
min
s
Auction ended
Sachsen
1,236 km
Coordinate measuring machine
TESA TechnologyMH3D DCC
Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 08120055, workpiece weight (max.): 227 kg, travel distance X-axis: 440 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, TECHNICAL DETAILS
Travel range X-axis: 440 mm
Travel range Y-axis: 500 mm
Travel range Z-axis: 410 mm
Max. workpiece weight: 227 kg
Table height: 930 mm
MACHINE DETAILS
Last overhaul: 2025
Last calibration and maintenance: 09/09/2025
Calibration and measurement protocols: available
Operating manual: available on CD
Dimensions & Weight
Dimensions (L x W x H): 1,030 x 1,160 x 2,320 mm
Total weight: 293 kg
Input voltage: 220 V
Input current type: Alternating current (AC)
EQUIPMENT
PC-DMIS Pro for Windows Version 4.2 MR4 Release Software, legally transferable
Renishaw MH20i measuring head with TP-ES probe system
Iiedpe Afhtqjfx Aaiji
EM1 extension module, length: 70 mm
TP20 SF probe module with standard probing force
TP20 EF probe module with high probing force
Functional HP computer
Additional Renishaw Brown & Sharpe TP-ES measuring head, functional
Several probe extensions
Various probe tips
The scope of delivery also includes a TESA Star-i measuring head and a Renishaw MIP measuring head. The TESA Star-i measuring head is defective. The Renishaw MIP measuring head is likely defective. However, the machine itself is equipped with the fully functional and even higher-quality Renishaw MH20i with TP-ES probe system and is therefore immediately ready for use.
Success:
Your message has been sent.
Auction
Ends in
d
h
min
s
Auction ended
Grand Est
1,045 km
Horizontal machining center
ElumatecSBZ 151
Condition: excellent (used), Year of construction: 2018, operating hours: 3,631 h, functionality: fully functional, travel distance X-axis: 9,500 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 715 mm, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS
Travel range X: max. 9,500 mm
Travel speed X: max. 60 m/min
Travel range Y: max. 1,150 mm
Travel speed Y: max. 40 m/min
Travel range Z: max. 715 mm
Travel speed Z: max. 40 m/min
Swivel angle A-axis: ±110°, freely programmable
Swivel angle C-axis: ±180°, freely programmable
Travel speed A and C axes: max. 175 °/s
Machining length: 9,000 mm
Spindle speed: 100–24,000 rpm
Spindle power (S1): max. 20 kW
Tool interface: HSK-F 63
Positioning speed of the machining unit: up to 60 m/min
Positioning accuracy Y-axis: ±0.1 mm
Positioning accuracy Z-axis: ±0.1 mm
Automatic tool changer: 13 standard tools and 7 special tools
Special milling cutter: max. Ø 100 mm
Additional tool changer for saw blade: max. Ø 500 mm
Iijdpfx Aj Akpapeaisi
Tool diameter: max. Ø 100 mm
Saw blade diameter: max. Ø 500 mm
Tool length from tool holder base: max. 180 mm
Clamping system: 2 circuits with 2 retractable stops
MACHINE DETAILS
Control and operation
Screen: 15" color screen
Network connection: integrated, 10/100 Mbit/s, RJ45
Control panel: MP03
Buttons on control panel: 55, with LED indicator
Operating hours
Power-on hours: 14,467 h
Spindle hours: 3,631 h
EQUIPMENT
Short tool change time
5-axis machining
Low-wear drive for the machining unit
Autonomous operation of the clamping units with an absolute measuring system
Standard central lubrication pump
Stable machine bed with linear guide and 6 rows of ball splines
Success:
Your message has been sent.
Auction
Ends in
d
h
min
s
Auction ended
Bayern
1,247 km
Waterjet cutting machine
FlowMach 500-4020 / Mach 50
Condition: used, Year of construction: 2018, operating hours: 6,955 h, machine/vehicle number: M542 8DC D01, repeat accuracy: 0.02 mm, working length: 4,000 mm, working width: 2,000 mm, Work area 4m x 2m, traverse speed 17.8 m/min, linear axis accuracy ±0.0127 mm, repeatability ±0.02 mm, Z-axis travel 305 mm, 610 mm, acceleration 0.1 g, circle accuracy ±0.0635 mm, pump pressure 3,800 bar, mobile operator station, touchscreen, LED lighting for status indication, software FlowXpert (integrated 2D/3D CAD/CAM software), pure water cutting, conventional abrasive waterjet cutting, height sensor Dynamic Contour Follower, splash guard, laser edge finder, TECHNICAL DETAILS
Work area X-axis: 4,000 mm
Work area Y-axis: 2,000 mm
Material support area: approx. 4,100 x 2,100 mm
Z-axis travel: 305 mm / 610 mm
Programmable Z-axis travel: approx. 305 mm
Iisdpfx Aaj Ahgrtjiei
Traverse speed: 17.8 m/min
Linear axis accuracy: ±0.0127 mm
Repeatability accuracy: ±0.02 mm
Acceleration: 0.1 g
Circle accuracy: ±0.0635 mm
Cutting speed increase through DWJ technology: up to 4x
MACHINE DETAILS
Waterjet system
Pump pressure: 3,800 bar
Cutting angle through beam compensation: 90°
Table load capacity: approx. 2,441 kg/m²
Operating hours: 6,955 h
EQUIPMENT
Mobile operator station
Touchscreen
LED status display
FlowXpert software with integrated 2D/3D CAD/CAM function
Pure water cutting system
Conventional abrasive waterjet cutting system
Secondary Z-axis for pure waterjet
Programmable, servo-driven Z-axis
Dynamic Contour Follower – automatic height sensing
PASER 4 Dynamic Waterjet (DWJ) cutting head technology
Automatic compensation of natural beam bending
Splash guard
Laser edge finder
Abrasive desliming system
Stainless steel beam catcher
Continuously adjustable water level regulation for quiet underwater cutting
Clamping and tensioning system
Distributed drive system with covered ball screws
Two-part steel table construction
Vibration-damping separation of tank and guide system
Abrasive desliming system, stainless steel beam catcher, water level regulation, clamping and tensioning system, secondary Z-axis pure waterjet, standard abrasive waterjet, programmable Z-axis, Z-axis (height adjustment): approx. 305 mm (programmable, servo-driven), water level control: fully adjustable for underwater cutting (low noise), drive: distributed drive system with covered ball screws, cutting head technology: PASER 4 Dynamic Waterjet (DWJ), compensates for natural beam bending, for precise 90° cuts at high speed (up to 4x faster), table load: high load capacity (approx. 500 kg/sq ft), table construction: two-part steel construction, separation of tank and guide system for vibration damping, material support area: approx. 4,100 mm x 2,100 mm.
Success:
Your message has been sent.
Auction
Ends in
d
h
min
s
Auction ended
Gelderland
694 km
William Boulton 48/2/ST/BT MKII - Vibro sieve
William Boulton48/2/ST/BT MKII
Condition: used, Year of construction: 1999, overall weight: 730 kg, rotational speed (max.): 1,440 rpm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Screening unit
Screening area: 1.0 m²
Iiedpfs Ai Navex Aaioi
Number of screen decks: 2
Screen dimensions: Ø 1,150 mm
Screen perforation, upper deck: 5.5 mm
Screen perforation, lower deck: 1.96 mm
Outlets: 2x Ø 145 mm + 1x Ø 195 mm
Material: Stainless steel 1.4552
MACHINE DETAILS
Motor power: 3.75 kW
Voltage: 400 V
Speed: 1,440 rpm
Dimensions and weight
Space requirement: 1.3 x 1.2 m
Overall height: 1.2 m
Weight: 730 kg
EQUIPMENT
Drive with vibrating motor
Perforated screen sheet in the upper deck
Wire mesh in the lower deck
Ball cleaning in the lower deck to prevent screen clogging
Integrated air and water spray system
Suitable for liquids
CE marking
Success:
Your message has been sent.
Listing
Botlek Rotterdam
640 km
Batch of shut-off valves
NEWAY / Various Brands – Large Lot of Industrial Valves – Ball & Gate ValvesIndustrial Ball Valves, Gate Valves & Flanged Valves
Call
Condition: excellent (used), Large Mixed Lot of Industrial Valves – NEWAY / KITZ / Various Brands
A large mixed stock of industrial valves is available for sale.
Manufacturers: NEWAY, KITZ, and various other brands. MRC Global supplier tags are also included.
Iiodpfo Ai S Dgsx Aaiji
Available types:
* Ball valves and gate valves
* Flanged industrial valves
* Handwheel, lever, and gear-operated valves
* Various sizes and pressure classes (150 / 300 / 800 LB)
* Carbon steel and stainless steel versions
Many valves are new and unused surplus stock, some still in original wooden crates with protective covers.
Suitable for oil & gas, petrochemical, and industrial applications.
Preferably sold as one complete lot.
Condition: Surplus stock
Price: Upon request
Location: Rotterdam, The Netherlands
Delivery: EXW Rotterdam
Please note: All items are sold as-is, where-is, without warranty or returns.
Success:
Your message has been sent.
Listing
Sonsbeck
773 km
Universal Testing Machine Tensile Testing Machine
Hegewald & PeschkeH5TMCI
Call
Year of construction: 2023, operating hours: 5 h, condition: as good as new (ex-display), functionality: fully functional, Universal testing machine H5TMCI 250mm Extended
mechanical structure:
2 backlash-free recirculating ball screws, drive via AC servo motor, Fmax = 5 kN, stiffness
10 kN/mm
1 working area up to nominal load:
working chamber width: 420 mm (optional extensions: +190mm / +330mm / +620mm)
max. test stroke without test tools, adapters and KMZ: 1025 mm (optional extensions: +250mm / +500mm)
Optional: conversion to floor model, required additional assembly: substructure table
Iijdpfxsmdpafs Aaisi
Travel speeds:
Test speed 0.001 - 2000 mm/min at full load
Return speed 2000 mm/min
Force measurement:
Measuring range: in the range 0.4 - 100 % of the nominal load class 1 (optionally class 0.5)
(+/- 1 % of the displayed value according to DIN EN ISO 7500-1)
Resolution of force measurement: +/-180,000 digits at 20ms integration time
The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DKD calibration is to be carried out at the installation site, this expense must be invoiced separately.
Crosshead travel measurement:
Incremental rectangular input with encoder monitoring, storage of crosshead position.
Resolution of the crosshead travel measurement:
Success:
Your message has been sent.
Listing
Bramshall
294 km
Steel lined continuous ball mill
HARDINGE Conical Ball Mill10'-0" x 84" HCBM
Call
Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS
Iijdpfx Aezvgdlsaisi
MILL SPECIFICATION
Model : 10’-0” x 84” HCBM
Overall Dimensions : 3050 mm diameter x 5185 mm long.
Installed Power : 400 kW
Absorbed Power : 320 kW
Mill Speed : 20 rpm
Lining : Chrome Iron Cast Liner Plates
Media : Steel Balls (30 tonne required)
Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor
Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings
No.2 Mill – White Metal Bearings
The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm.
The first mill, with the white metal bearings, was installed in around 1970.
The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings.
Both mills were in operation until the site closed in 2009 and have been in storage ever since.
Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports).
Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland.
Please check out our other listings and subscribe to our stock list.
Success:
Your message has been sent.
Listing
Zheng Zhou Shi
8,333 km
Mill / grinding mill
Batch Ball Mill, Silica grinding millQuartz ball mill, silica powder grinding
Call
Year of construction: 2026, condition: new, ceramic ball mill ,Batch ball mill ,also called ceramic ball mill ,it is used for fine grinding of feldspar,quartz,clay,ore and so on.The ceramic ball mill is mainly used for material mixing, grinding,uniform product fineness,and saving power.It can be dry or wet.The machine can use different liner types according to production needs to meet different needs.The fineness of the grinding operation is controlled by the grinding time
ceramic ball mill Working principle
when ball mill working,steel balls inside drum will rotate with the drum to some height,and then steel balls fall down with materials to reach the point of grinding.
Working Principle of Ceramic ball mill
Iiodpjvzx Aujfx Aaisi
ceramic ball mill ,Intermittent ball mill grinding operation is finished in the cylinder body. When the cylinder rotates, materials ascend to a certain height and then fall along a certain path due to the balls' gravity. Two forces are generated on the balls inside. One is the force on balls through tangent direction; the other is a opposite force in the contrast to the diameter of balls, as a result of the force generated when the balls slide down. These two forces will constitute a couple for the steel balls. The balls are squeezed between the cylinder and the adjacent steel balls, so the couple can make unequal-sized friction force. The balls will orbit along with the cylinder axis and then fall down, which can produce a strong impact force on the ores in the cylinder body and, as a result, the ores will be crushed. In conclusion, the ores in the cylinder body are mainly crushed by composite effect of peeling force, impact force and extrusion force.
Ceramic ball mill also named Intermittent ball mill which adopts the wet intermittent operation, is used for fine grinding and mixing the material such as feldspar, quartz, clay ceramic raw materials. The discharging and the mud size can through through 1000 sieve pore. This machine is high milling machinery, materials should be Broken in the fineness of the state into the grinding mill to get the highest efficiency and economic benefits.
The cement mill is key equipment for the grinding process of the cement clinker after the crushing process of it. It is mainly used in the cement silicate product industry. After long term design and manufacture of the cement mill, our company now has series of cement mill with various specifications to meet with different requirement from our customers.
Features of Cement Mill
Our company adopts suitable transmission methods according to different specifications. We have brim drive and center drive as transmission form. The cylinder adopts new type step lining to increase the grinding area. And it is easily repairable and changeable. The new designed separate-chambered structure adopts flexible lifting blade and fixed lifting blade and it is easily fixed and repaired.
Technical Details
We have different models and options for different requirements, please contact us for more info.
Success:
Your message has been sent.
Listing
Bramshall
294 km
Continuous Ball Mill
Hardinge Conical Ball Mill6'-0" x 36" HCBM
Call
Condition: used, HARDINGE Conical Ball Mill
6’-0” dia x 36” ball mill for the dry grinding of industrial minerals.
Iiodjzvgvnepfx Aaisi
Mill fitted with Manganese steel liners for operation will steel ball grinding media.
White Metal Bearings on trunnions.
90 kW Motor fitted (could be reduced to 75 kW).
Mill with countershaft drive but could be converted to gearbox.
Success:
Your message has been sent.
Listing
Halberstadt
1,029 km
CNC - Milling and Turning Center 5 - Axis
MATECHV 700
Call
Condition: good (used), Year of construction: 2021, Ref. -No.: 10630
Manufacturer: MATEC
Type: HV 700
Year of construction: 2021
Type of control: CNC-Steuerung
Control: Heidenhain TNC 640
Storage location: Halberstadt
Country of origin: Germany
X-Travel: 2600 mm
Y-Travel: 700 mm
Z-Travel: 950 (horizontal) / 900 (vertikal) mm
Swivel range: ± 105 °
Table speed range: max. 700 min/-1
Tool Taper: HSK-A63
Numbers Of Tools In Magazin: 50
Turning Speeds: 20 - 15.000 RPM
Max. Torque: 195 (40 % ED) / 150 (100 % ED) Nm
axes: 5 + Spindel
Drive Capacity - Spindle Motor: 41 (40 % ED) / 31 (100 % ED) kW
Operating hours: Steuerung ein 19.381 / Maschine ein 7.220 / Programmlauf 2.285 H
Internal cooling: 20 / 40 bar
Holding torque: 5.000 Nm
NC rotary table: 2.000 kg
Tabletop C-axis: NC-Rundtisch Ø 750 mm, im Maschinentisch eingelassen
Further information:
- NC swivel head, infinitely variable ± 105°, torque drive, swivel radius 250 mm
- Motor spindle HSK-A63, 20 - 15,000 rpm, 41 kW (40 % duty cycle) / 31 kW (100 % duty cycle)
- NC rotary table Ø 750 mm recessed into the machine table (torque drive, max. 700 rpm, indexing accuracy ± 2.5", max. load 2,000 kg)
- Direct measuring system X, Y, Z axes (absolute)
- 50 tool pockets
- Internal coolant supply 20 bar and 40 bar with paper band filter (450 l)
- Hydraulic motor spindle clamping for turning operations
- Partition wall for pendulum (dual-station) machining
- Automatic safety doors
- 3D touch probe with radio transmission
- Renishaw RTS tool setting probe with radio transmission (2 pcs)
- Software option KinematicsOpt incl. calibration ball with holder
- Dynamics package for free-form surfaces
- Collision monitoring SETAC-ADVANCED
- Electronic handwheel (portable)
- Full work area enclosure with roof
- Bellows with steel slats
- Chip conveyor, special version for high-volume machining
- Mechanical air filter CMC 1500 (2 pcs)
- Cooling unit for electrical control cabinet
- Flushing gun
- Central oil lubrication
Iiodpfxo Ahmvmj Aaioi
- LED work area lighting
- Installation elements
The machine can be viewed under power by arrangement.
Success:
Your message has been sent.
Listing
Winnenden
1,137 km
Tipper van
FUSOCanter 7C18 MEILLER Kipper
Call
Condition: like new (used), functionality: fully functional, mileage: 500 km, power: 129 kW (175.39 HP), first registration: 01/2026, fuel type: diesel, empty load weight: 3,690 kg, maximum load weight: 3,800 kg, overall weight: 7,490 kg, tire size: 205/70R17,5, tire condition: 100 %, axle configuration: 4x2, wheelbase: 2,800 mm, next inspection (TÜV): 02/2026, fuel: diesel, fuel tank capacity: 100 l, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 3,000 mm, loading space width: 2,000 mm, loading space height: 400 mm, Year of construction: 2025, Equipment: ABS, Android Auto, Apple CarPlay, Bluetooth, air conditioning, airbag, central locking, differential lock, fog lights, navigation system, onboard computer, power assisted steering, soot filter, start-stop system, tachograph, traction control, trailer coupling, winter tires, FUSO Canter 7C18 MEILLER 3-way Tipper
Payload approx. 3.8 t
3,500 kg towing capacity
Chassis warranty: 3 years or up to 100,000 km from first registration
Driver comfort suspension seat with horizontal suspension (standard)
100 L fuel tank (standard)
Traction tires on rear axle (standard)
Lane departure warning system (standard)
Central locking with 2 remote controls (standard)
Overhead storage above windscreen (standard)
Lockable glove compartment (standard)
Immobilizer with transponder (standard)
Storage behind seat (standard)
Driver seat with armrest (standard)
Fog lights, halogen (standard)
Instrument lighting, continuously adjustable (standard)
Daytime running lights, automatic (standard)
Rear axle stabilizer (standard)
Digital tachograph (standard) – without tachograph calibration
ABS with electronic brakeforce distribution (standard)
Spare wheel / spare rim (standard)
Electric windows (standard)
Electronic Stability Program (standard)
Emergency Braking Assist (AEBS)
Lane Departure Warning System (LDWS)
LED front headlights (LH9)
Reversing warning beeper
Light sensor
Driver airbag (SA5) (standard)
Limited slip differential lock (A86)
Rear underrun protection (C01)
Body mounting components (CR8)
Front license plate holder (C60)
Batteries, 2 x 12V / 100 Ah, maintenance-free (EE9)
7" touchscreen radio/audio system, incl. Apple CarPlay (EF3)
Reversing camera
Lifting and lowering mechanism (EH1)
12V, 13-pin trailer socket (EX5)
Heated exterior mirrors (F62)
Medium mirror arm incl. wide-angle mirror (FM9)
Frame cover, behind driver's cab (GU8)
Automatic climate control (H07)
Reversing warning system (JW0)
Exhaust system cover (KA6)
PTO (output torque: 200 Nm, 31 kW) with vacuum pump control, for direct mounting of hydraulic pump (NQ7)
Iijdpfoygxppsx Aaioi
MEILLER multifunctional raised front wall (OK7)
MEILLER reinforced floor to 500 mm (Trigenius) (OK8)
MEILLER side wall height increased to 500 mm (Trigenius) (OK9)
MEILLER TRIGENIUS tipper body D205, 3600 x 2000 x 400 mm (PYN)
MEILLER holder for hand tools (0Q6)
MEILLER side-mounted plastic toolbox (PYY)
Engine version, Euro VI OBD Step E (OM5)
Double battery cover (OT6)
AdBlue tank cover (OU3)
Ball head for factory underrun protection (QQ0)
Bracket and installation for hand throttle (VB1)
Hand throttle for engine speed control (VA6)
Canter safety package incl. rubber floor mats (YT7)
Valve extensions (YT8)
Success:
Your message has been sent.
Listing
Budapest
1,778 km
Punching and nibbling machine
TRUMPFTruPunch 3000 S20 Large format
Call
Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++
+++ Descending Die +++
Basic machine:
TruPunch 3000 large format (S20)
Machine:
- Box frame
- Hybrid axis system
- Linear tool magazine with 24 stations for clamps and tools
- Hydraulic clamps (3x)
- Drives with maintenance-free three-phase motors
- Repositioning with programmable presser foot
- Foot switch to close clamps
- Part chute, right
- Part removal flap, left
- Sensor for part removal flap
- SortMaster Compact retrofit-prepared
Punching head:
- Delta Drive
- Rotating single-station tool adapter
- Programmable presser foot position
- Tool length compensation
- Punch spray lubrication
- Punching slug vacuum
- Forming function
- Punch stroke counter
Control:
- TRUMPF control based on Rexroth IndraMotion MTX
- Touch panel with 19" TFT color display
- Touchpoint
- Auto-shutdown
- Remote support interface
- Program manager
- Production plan
Data transmission:
- Central Link
- Online Update Manager
Safety:
- CE marking and EC Machinery Directive
- Double-beam safety light barrier
Advanced standard configuration:
- First index pin (inside right)
- Ball tables
- Part chute for finished part container
- Chip container to rear for removal
Advanced machine and punching features:
- MultiTool function
- MultiShear function
- MultiBend function
- Tapping function with thread counter
- Forming tap breakage control
- Lubricant level monitoring
- Unlimited time license
- Marking/Quick beading function (option)
- Engraving function
- Deburring and roller technology function
- Adaptive stroke calibration
- StripLine
- Die spray lubrication with fill level monitoring
- Descending Die
- Integrated flattening function
- Smart punch monitoring
- Additional clamp
- Height-adjustable clamp
- Vibration damping
- Chip container removed to front
- Brush tables with loading and unloading assistance
- Warped sheet detection
Technical data
TruPunch 3000 large format (S20)
Dimensions / Weight:
Width: 7644 mm
Depth: 7666 mm
Height: 2200 mm
Weight (fully equipped): 13,800 kg
Control / Hardware / Electrics:
Hard disk type: SSD
Number and size of hard disks: 2 x 120 GB
Customer program memory: 10 GB
Display: Touchscreen
Display size: 21.5 in
Interfaces: USB
Network: RJ45
Control type: Bosch CML75
Operating system: Windows 10 IoT
Axis data:
X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors
Punching head drive: Electric
Max. X axis speed: 90 m/min
Max. Y axis speed: 60 m/min
Max. simultaneous axis speed: 108 m/min
Max. C axis speed (punching): 350 rpm
Max. C axis speed (tapping): 350 rpm
Max. punching stroke rate (E=1mm): 690 1/min
Max. marking stroke rate: 1000 1/min
Accuracy — positioning deviation Pa: +/- 0.1 mm
Accuracy — position range Ps: +/- 0.03 mm
Smallest programmable increment: 0.001 mm
Working range / Workpiece size:
Max. sheet thickness: 6.4 mm
Max. workpiece weight: 230 kg
X axis working range: 3000 mm
Y axis working range: 1550 mm
Punch-specific data:
Max. punching force: 180 kN
Iiedpfxexmfc Us Aaiji
Max. presser foot force: 20 kN
Max. tool size, punching (outer diameter): 76.2 mm
Max. tool size, forming (outer diameter): 101.6 mm
Success:
Your message has been sent.
Listing
Oberkochen
1,178 km
Sanding machine
HESSExpert
Call
Condition: not inspected (used), Number of sanding units 4 St
sanding width 190 mm
Sanding height max. 4-180 mm
weight 4200 kg
Hess Expert 4-belt single wood sanding machine
machine will be checked by our technicians
-----
Ø Grinding at the bottom/top
Ø With 2 offset grinding units each (bottom and top)
Ø Grinding units (bottom and top) connected in series according to the
Dressing principle
Ø Pre-sanding with coarse grit (calibrate)
Ø Regrinding with fine grit (finish)
Ø Central motorized height adjustment of the lower grinding units
Ø Central motorized and synchronous height adjustment of the entire upper
Grinding and brushing units including the upper transport units
Ø Oscillating sanding belt utilization (during the sanding process)
Ø Absolute power connection thanks to 5.5 KW motors and large dimensions
drive drums
Ø Oxide ceramic grinding shoe for
- exact surface geometry
- no adjustment work
- permanent dimensional accuracy
- completely maintenance and wear-free
Basic structure:
Stable, heavy welded construction made of strong-walled rectangular profiles
additional, statically calculated reinforcements for optimal
Vibration dampening.
Staggered grinding units with large dimensions
Belt drive drums for slip-free belt running. Two-point suction for direct
and flying dust with sealing brushes and integrated sanding belt blow-off
Device to increase the service life of the sanding belts. Grinding units in
heavy steel plate construction as the basis for vibration-damped,
quiet tape running. Absolutely backlash-free guides as ball linear sets
hardened and ground shafts. Height adjustment of the grinding units
via hardened and ground special linear guides as well as pre-tensioned ones
Guide carriage. Permanent precision thanks to dust and dirt protection
Ball linear sets and guide carriages.
Large-sized pre-grinding rollers as contact rollers. Contact rollers and
Sanding shoes in a balanced ratio to the sanding belt grain load.
The large drive drums guarantee full transmission
the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore
Slip-free, stable running and optimal heat dissipation. This makes it the
strongest
Chip removal possible. Automatic machine stop activation in the event of a belt
break.
Visual display on the control panel and via flashing lights on the machine.
Sanding shoes for finish completely maintenance-free and wear-free made of
oxide ceramic
with optimal heat dissipation.
Grinding belt tension via appropriately sized compression springs.
Sanding belt relaxation for belt changing using a pneumatic device
sensitive, distortion-free placement of new tapes.
Upper grinding unit and brush device centrally motorized
Height adjustable with digital display in the control panel for the motorized
Iisdpfxet Tqy Ee Aaioi
Grinding thickness adjustment.
Brushing and finishing device, for better surface finish, integrated into
the basic machine. Two special brush rollers 150 mm Æ arranged one above the
other
in synchronous function for advance
thrust. Separate height adjustment of the brush rollers on precise
Carriage guides for post-correction of wear. Additional transport roller for
Removal or further transport of the workpiece from the automatic grinding
machine
with the conveyor belt.
Wooden guide in the inlet area for hard guide and bearings mounted on both sides
pressure rollers. Safe transport of profiled workpieces on ca...
Success:
Your message has been sent.
Listing
Solingen
839 km
3500L 1.4404 GMP storage tank
BRINOXBH6771-BH1001 Paket 29
Call
Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,500 l, Equipment: documentation/manual, BRINOX 3,500 L Storage Tank – 1.4404 – PED Module G – TÜV – FAT – 2020 – As New
Manufacturer: BRINOX d.o.o., Slovenia
Type: SVBBH-3500
Tag no.:
Serial number: 1003461
Year of manufacture: 2020
Condition: As new / unused
BH6771-BH1001 Package 29
TECHNICAL DATA
Product type: Storage tank / process vessel
Nominal capacity: 3,500 liters
Total volume: approx. 4,082 liters
Empty weight: approx. 1,750 kg
Material in contact with product: 1.4404 (AISI 316L)
Internal surface: electropolished
Surface roughness: tested according to roughness protocol (Ra ≤ 0.8 µm)
Permissible pressure PS, vessel: -1 / +3 bar
Test pressure PT, vessel: 5.6 bar
Permissible pressure PS, jacket: -1 / +6 bar
Test pressure PT, jacket: 10.8 bar
Permissible temperature TS: -10 °C to +150 °C
Fluid group: 2
Design according to AD 2000
Pressure vessel according to PED 2014/68/EU
Category III
Module G – single item inspection
CE marking
FAT – Factory Acceptance Test
Full FAT inspection carried out on 26.08.2020.
Documentation check: complete and released
Welding documentation inspected and compliant
Delta ferrite inspection conducted, no deviations
Surface roughness checked and compliant
All inspections rated “OK”.
EXECUTION
• Horizontal cylindrical pressure vessel
Isdpfxsylnppj Aaioii
• Dished heads
• Multiple CIP connections on end face
• CIP spray ball system
• Manhole with round pressure cover
• Pressure and temperature connections
• Bottom discharge outlet
• Stainless steel support legs
• Pharmaceutical-grade weld seams
DOCUMENTATION – fully available
• EU Declaration of Conformity
• TÜV certificate
• Module G individual inspection
• FAT protocols
• Welding documentation
• WPQR / WPS
• 3.1 Material certificates
• Non-destructive test reports
• Delta ferrite test report
• Roughness protocol
• Dimensional accuracy report
• Calibration certificates
• Technical drawings
• Parts list
• Operating and maintenance manual
Complete digital documentation folder available.
CONDITION
• Never in productive use
• Stored item
• Interior surface in absolutely as-new condition
• No corrosion
• No signs of use
• As-new industrial condition
• Immediately available
SUITABLE FOR
• Pharmaceutical solutions
• WFI / PW systems
• Buffer and media preparation
• Sterile liquid processes
• GMP production facilities
• Biotechnological applications
SPECIAL FEATURE
Custom-manufactured BRINOX pharmaceutical tank with full FAT acceptance, verified welding documentation, delta ferrite certification, documented surface roughness, and comprehensive PED Module G single-inspection.
Not a standard tank – but pharmaceutical grade suitable for validation, with complete technical documentation throughout.
Success:
Your message has been sent.
Listing
Solingen
839 km
GMP wash solution temperature control skid
BRINOXLEP 2.3 KK6762 Paket 9
Call
Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer
BRINOX d.o.o.
Project Number
B-0001113-LEP2.3
LEP 2.3 KK6762 Package 9
Module
M024
Product Description
LEP2.3 – Wash Solution Temperature Control Unit
Serial Number
1003572
Equipment Number
20022782
Tag Number
MR-INH-VPR61-KK6762
Year of Manufacture
2020
Technical Data
System Type
Pharma temperature control skid for precise temperature regulation of wash and elution solutions.
Constructed as a compact, multi-level stainless steel frame design with fully integrated pump, heat exchanger, and valve technology.
Dimensions
Length 1920 mm
Width 1365 mm
Height 1840 mm
Design
Fully pre-assembled, insulated temperature control skid
Pharmaceutical design according to GMP requirements
Industrial stainless steel frame construction
Materials
Product-contact parts: Stainless steel 1.4435 / 1.4571
Frame construction: Stainless steel 1.4301
Welds as per EN ISO 13920 D
Insulation
Completely insulated piping and equipment
Closed-cell high-performance insulation with black protective sheathing
Main Components
PU1021 Process Pump
PU9203 Chilled Medium Pump
WT1001 Plate Heat Exchanger
WT1011 Finned Tube Heat Exchanger
BH9701 Expansion Tank
Pneumatic Control Valves
GEMÜ Stainless Steel Ball Valves
Pressure Transmitters
Temperature Measurement Points
Pressure Gauges
Electrical Junction Box with Warning Labels
Stainless Steel Cable Trays
Media
Chilled Brine Supply / Return
Wash Solution Process Medium
Control Air 6 bar
All media connections sealed at factory and packaged securely for transport.
Leak Testing
Performed as pressure test with compressed air.
DP-01
Medium: Compressed Air
Test Pressure: 3.15 bar
Pressure Drop: 0.13 bar
Date: 27.07.2020
Result: Passed
DP-02
Medium: Compressed Air
Test Pressure: 3.28 bar
Pressure Drop: 0.07 bar
Date: 26.07.2020
Result: Passed
Pressure holding time: 1 hour each
No leaks detected
Calibration Certificates
Calibration Laboratory: LOTRIČ Metrology
Certificates according to EN ISO/IEC 17025
Measurement Ranges: –1 to 20 bar and 0 to 10 bar
Calibration performed
Documentation Scope
FAT Plan and Report
Deviation Report
Layout Drawing Check
Maintenance Inspection
P&ID
Leak Test Report
Calibration Certificates
Works Certificate 2.1 EN10204
Material List
As-Built Isometrics
Complete Turn-Over Package
Inspection Status
FAT performed
Pressure test passed
Calibrations available
PED-compliant design
Pharma documentation complete
Application
Temperature control of wash and elution solutions in biopharmaceutical production facilities
Suitable for GMP environments
Condition
New system
Original packaging
Iiedpfxjyl Iwte Aaisi
Unused
Year of manufacture: 2020
Factory condition
Fully documented
Immediately available
Success:
Your message has been sent.
Listing
Denkendorf
1,241 km
Coordinate measuring machine
WenzelLH1512
Call
Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 054390, measuring range X-axis: 1,500 mm, measuring range Y-axis: 2,500 mm, measuring range Z-axis: 1,200 mm, Manufacturer: Wenzel
Model: LH 1512
Serial No.: 054390
Year of manufacture: 2005
Measuring software: Quartis
Measuring volume X/Y/Z mm: 1500mm/2500mm/1200mm
Control panel: HT400
Probing system: PH10M / TP200
Control system: WPC 2040
Supply: 6 bar
Power requirement: 230 V
Accuracy: E0, MPE 3.7 µm + (L/250mm)
PForm.Sph.1x25:SS:Tact 3.7µm
Machine weight: approx. 12500 kg
Workpiece weight: approx. 3750 kg
Space requirement CMM: L ≈ 4000mm / Width ≈ 2560mm / Height ≈ 4030mm
Equipment: Active damping
Accessories: Ball standard, probe changer SCR200
Condition: Used, regular maintenance performed
Options: DAkkS – Calibration possible
The machine can be modernized with new accessories according to customer requirements.
Price: on request!
Installation and commissioning possible!
We will gladly prepare a detailed offer for you!
Note: Our offer is exclusively for professional customers!
Iisdpfxoz Sy S Ts Aaiji
(Subject to changes and errors in the technical data, information, and prices, as well as prior sale!)
Success:
Your message has been sent.
Listing
Haiger
928 km
Universal hardness tester
WolpertDia Testor 2Rc
Call
Condition: refurbished (used), Testing device with test forces of 1-250 kg
- Vickers HV1 - HV120
- Brinell 15.625 / 31.25 / 62.5 / 187.5 / 250 kg
- Rockwell HRA / HRB / HRC
Scope of delivery:
- Hardness testing device
- LED lighting system
- Objectives 70X / 140X
- Scales 70X / 140X
- Diamond indenter 136° Vickers
- Diamond cone 120° Rockwell
- Ball holder with ball Ø2.5mm Brinell
- Test table, flat, Ø80mm
- Test table, flat, Ø235mm
- Prism support Ø80mm
- Power cable
- Operating manual with conversion tables
Iijdpfx Aaec Nl Ecoiji
Optional:
- BVMS3 software
- Delivery / Installation / Calibration & Training
Success:
Your message has been sent.
Listing
Zheng Zhou Shi
8,333 km
Ball mill for powder and mining plant
Mingyuan Ball Mill For Fine PowderPowder grinding mill for coal, silica
Call
Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details
A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing.
Working Principle
The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application.
Structural Composition
A standard ball mill consists of several main components:
Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input.
Discharging part: Can be grate type or overflow type, depending on the discharge method.
Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners.
Transmission system: Includes motor, reducer, small transmission gear, and electrical control.
Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding.
Iiedpoq Nf U Eofx Aaioi
The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption.
Technical Details
Typical Specifications:
Feeding size: ≤25 mm
Discharge size: 0.074–0.4 mm
Capacity: 0.65–615 t/h (depending on model and material hardness)
Cylinder speed: 18–38 r/min
Power: 18.5–4500 kW
Liner material: High manganese steel, rubber, or alloy steel
Grinding media load: 30–45% of cylinder volume
Operating Modes:
Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz.
Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity.
Application in Mining Plants
In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use.
Common Applications:
Gold, copper, iron, and zinc ore grinding
Cement clinker and slag processing
Silicate and ceramic powder production
Coal and mineral powder preparation
Conclusion
A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.
Success:
Your message has been sent.
Listing
Aalen
1,178 km
Sanding machine
LoewerDoubleMaster DSM 2000
Call
Condition: new, Number of sanding units 4 St
sanding width 190 mm
Sanding height max. 2 - 180 mm
LÖWER - DoubleMaster DSM 2000 DB
-----
Double-sided single wood sander with additional
Transverse brush sanding unit (discs) and
Longitudinal brush sanding unit (roller) for sanding
Solid wood such as B. window wood etc.
Stable top version with long cast tables and
Conveyor belt feed. Suitable for high continuous loads
even with higher chip removals.
1. Belt sanding unit with CERMET sanding shoe pre-sanding
2. Disc aggregate cross grinding for defibering
3. Rolling aggregate longitudinal grinding for directional finish
Direction of growth
- Staggered sanding and finishing units at the top
and below
- directly driven rubberized sanding rollers for slip-proof
free power transmission
- Combined grinding via roller and shoe for high chip removal
with a flat intervention zone at the same time
- maintenance and wear-free CERMET-coated grinding wheels
shoes with very good thermal conductivity and absolute
Dimensional accuracy
- External cooling of the grinding zones for cooler grinding
and longer sanding belt service life
- force-guided pneumatically controlled sanding belt
oscillation
- effective sanding dust extraction directly on the
Grinding rollers
- Airborne dust extraction on the tension rollers
- integrated brush grinding device (transverse and
Longitudinal) with sanding dust extraction
- motorized grinding thickness adjustment via precision
threaded spindles and large-sized linear ball screws
bearing sets on hardened and ground precision
shafts with dust and dirt protection
- Adjustment of the chip removal at the bottom via precision
Threaded spindle with dimension display via scale ring
(Resolution 0.1mm)
- Sanding belt tension via pneumatic cylinder
constant clamping pressure
- Sanding belt change with pneumatic belt relaxation
Within seconds
- Adjustment option for the sanding belt run
Band change
- electro-pneumatic compressed air monitoring
- Anti-running protection via contact roller if it is too thick
workpieces
- Workpiece transport via calibrated non-slip and non-stick
fixed conveyor belts over heavy, 1000mm long cast iron
tables with a finely planed surface and spring-loaded
Pressure rollers with fine adjustment
- Cardan shaft drive for smooth and consistent
Workpiece transport
- Feed gear motor infinitely variable
for quick adaptation to different types of wood
- all motors electrically protected
- ergonomically arranged controls on the
Workpiece inlet side
- digital thickness display (resolution 0.1mm) with modern
Magnetic tape system
Technical data:
- Sanding belt speed 22 m/s
- Sanding belt length 1800mm
- Sanding belt width 200mm
- Working width 190mm
- Grinding thickness 2-180mm
- two brake motors for 5.5 kW drive
- Feed motor 1.0 kW
- Feed speed 4-20m/min.
- automatic height adjustment 0.37 kW
- Brush sanding units
Disc D=max. 200mm
Roller D=max. 270mm
- Suction nozzles 2 x 120mm and 2 x 180mm
- Pneumatic connection 6 bar
- Working height 870mm
External dimensions:
- Length 2600mm
- Length with wheels 2985mm
- Width 880mm
- Height 1910mm
Iijdpfxoyrty He Aaiji
- Weight approx. 1500 kg
- Operating voltage 400 volts, 50 Hz, 3P
- CE version
-----
Price of the above machine on request!
-----
Special accessories with additional charge:
Workpiece blow-off
- ...
Success:
Your message has been sent.
Listing
Hawksworth Trading Estate
438 km
AMADA VIPROS 255 CNC PUNCH PRESS
AmadaVIPROS 255 BALL TABLE MODEL
Call
Condition: good (used), Year of construction: 1998, Model ... Vipros 20-50-50
Frame Construction ... Bridge Type
Press Capacity ... 20 Tonnes (196kN)
Press Type ... Servo Controlled Hydraulic Ram
Axis Traverse Distance ... 1270 mm x 1270 mm
Workable Max. Sheet Size . 1270 mm x 2540 mm
(with auto repositioning)
Maximum Material Thickness ... 6.35 mm Mild Steel
Max. Material Weight ... 105 Kg
Max. Material Weight (Max Speed) ... 62 Kg
Max. Hole Dia. ... 88.9 mm
Number Of Stations ... 31 Stations:
19 x 12.7 mm
6 x 31.7 mm
1 x 50.8 mm
2 x 88.9 mm
Auto Index 2 x 31.7 mm
1 x 50.8 mm
Axis Speed ... 82 m/min
Hits Per Minute (2mm Pitch) ... 1000 H.P.M./2.5mm Stroke
(25.4mm Pitch) ... 340 H.P.M./8mm Stroke
Turret Speed Bi-Directional ... 35 R.P.M.
Punching Accuracy ... ± 0.07 mm
Punching Accuracy (High Accuracy Mode) ... ± 0.05 mm
Repeatability ... ± 0.015 mm
Ram Stroke Length (Maximum) ... 40 mm
Axis Drive ... AC Servo Motor
Turret Drive ... AC Servo Motor
Electric Power Required ... 22 kVA 400V +/- 10% 50 Hz
Air Pressure Required ... 5.0 kgf/cm²
Air Flow ... 250 1/min
Machine Length ... 5030 mm
Machine Width ... 2630 mm
Machine Height ... 2160 mm
Machine Weight ... 9200 kg
Ijdpfx Ae Afdz Rsaioii
NC SPECIFICATION
Model of NC ... FANUC 18-P
Axis ... 3 Axis Simultaneous + PHNC
Tape Code ... EIA or ISO
(Automatic Recognition)
Programming Mode ... Absolute/incremental
Min. Input ... 0.01 mm (0.01°)
Max. Input ... 99999.99 mm
Preparatory Function ... G - 2 Digit
T Function ... T - 3 Digit
M Function ... M - 3 Digit
Single Block ... Yes
Block Delete ... Yes
Optional Stop ... Yes
Editing ... Yes
Manual Data Input ... Yes
Memory Capacity ... 64 Kb
No. Of Programs ... 200
Machine Operation ... Memory
Interface ... RS 232 C
Trust Seal
Dealers certified through Machineseeker

Success:
Your message has been sent.
Listing
Röhrnbach
1,370 km
Combination trailer
FLIEGLZPS 200 K-Jumbo-Z 70 Kombianhänger
Call
Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT22001014840, empty load weight: 4,000 kg, maximum load weight: 16,000 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, total length: 9,975 mm, total width: 2,550 mm, total height: 1,000 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Year of construction: 2026, Equipment: center pivot plate, Archive photos - actual vehicle may differ
#Container locking system
2 pairs of locking hooks recessed into the floor
Pneumatic actuation
Low-tension locking system, clamping force 6 t per claw
Genuine original for 30+ years
2-point internal container locking; skip containers with internal ridge not lockable
(for skip containers with sub-frame to DIN 30722, rear-loaded)
Note: push container fully flat at the front roller recess
Longitudinal guide rails, laterally adjustable/removable, approx. 115 mm high
Turntable with heavy-duty ball-bearing slewing ring
8 pairs lashing points, top/side, outer frame, 5 t each
7 pairs combi stake pockets, bolted ring eyes, 5 t each, outer frame, approx. 72x42 mm (usable w/ plug-in stakes; fitted stakes block 5 t eyes)
1 lockable plastic tool box, W=600 / H=425 / D=460 mm
1 open storage box for container net
Turntable trailer towing gear
Drawbar with certified 40 mm tow eye
Lowerable Y-shaped drawbar, pneumatic raise/lower assist
(for Absetzcontainer transport, rear-loaded)
#Axles & suspension
BPW or SAF drum-brake axles, manufacturer's choice
Laser-aligned axles/running gear - reduces tyre wear and fuel use
Axle grease points extended outward
Air suspension with raise/lower valve
Air-bellows pressure gauge
#Wheels & tyres
235/75 R 17.5, manufacturer's choice
Steel wheels, twin arrangement, factory silver
TPMS to ECE R 141, shown via EBS on tow display, no truck install (pre-equipped; standard tyres only)
#Braking system
2-line air braking system
Spring-loaded parking brake
Axle load detection via EBS CAN-bus, cab display; truck pre-equipped, no install (not a calibrated scale)
Vehicle driving stability system
Front Duomatic connection, with line to towing vehicle
24V EBS electronic braking system, front EBS connector and cable
Caution: tow only with vehicles that guarantee ABS effectiveness
#Electrics
24V LED multi-chamber lamps; yellow LED side lights; LED plate light (false diagnostics possible on some tow vehicles)
Yellow LED side lights coupled with indicator (flashing side lights)
2 white LED front position lights
Iiodpszy Rw Rjfx Aaiji
2 white/red LED rear outline marker lights
1 x 15-pin front connector, with connecting cable
Parking sockets for electrics, air and EBS on the drawbar
Additional rear LED work light, via reversing light
LED beacon with mount, switched via sidelight (lamp removable)
LED work lights both sides, via reversing light
#Floor
Steel floor
Front roller recess in floor for skip containers 5,000-7,000 mm long
Note: slight floor waviness possible due to welding distortion
#Loading ramps
Lockable storage space for loading ramps beneath the load bed
1 pr aluminium ramps ca. 3,000x450 mm, 14,000 kg/pair (not for steel chains/tyres; rear rail)
#Country of registration / plates
Country of registration: Germany
With Dekra inspection and report (per §13 EG-FGV)
Contour marking, reflective tape to ECE R 048, white sides/red rear
Success:
Your message has been sent.
Listing
Puurs-Sint-Amands
705 km
Analytical balance, 120 g / 0.1 mg, calibrated
SartoriusEntris II BCE124i-1CEU
Call
Year of construction: 2023, condition: like new (used), Sartorius Entris II BCE124i-1CEU – analytical balance, 120 g / 0.1 mg, calibrated version
Analytical balance from the Sartorius Entris II Essential Line, manufactured in 2023, in the original Sartorius packaging with all accessories. The transport safety device is still attached to the glass draft shield, and the accessories are still in their original packaging.
Iiodpfxe Ai H Ebe Aaiji
Technical data (according to the nameplate)
Model: BCE124i-1CEU, type BC-EB
Weighing range (Max): 120 g
Readability (d): 0.1 mg
Calibration value (e): 1 mg
Minimum load (Min): 10 mg
Accuracy class I, calibration mark M 23
Internal calibration (isoCAL)
Operating temperature: +10 °C to +30 °C
Power supply: 15 V DC, max. 4 W
Touchscreen, glass draft shield with sliding doors, USB-C connection
Serial number: 0044304005
Date of manufacture: 11-07-2023, Made in Germany
Scope of delivery
Balance with draft shield
Weighing pan and sub-pan
Power adapter
Original EU declaration of conformity
Operating manual
Original box
Success:
Your message has been sent.
Listing
Duxford
436 km
Biorad Gs-900 Calibrated Densitometer
BioradBiorad Gs-900
Call
Condition: used, This listing is for 1 of 2 Biorad Gs-900 Calibrated Densitometer
The unit is in full working condition and is ready for immediate release
The GS-900 Calibrated Densitometer is a self-calibrating 21 CFR Part 11 gel imaging system designed for acquiring gel, blot, and film images. It is capable of reproducibly imaging gels, blots, and film and quantitating proteins across a wide dynamic range. The system uses transmissive and reflective imaging to scan chromogenic samples at the optimal detection wavelength, and its three-color red, green, and blue CCD imaging technology enables accurate, reproducible quantitation with a wide variety of common stains.
Key Features:
Imaging Capabilities: Transmissive and reflective imaging for gels, blots, and film.
Dynamic Range: Wide dynamic range for accurate quantitation.
Imaging Technology: Three-color red, green, and blue CCD imaging.
Calibration: Self-calibrating for consistent performance.
Compliance: 21 CFR Part 11 compliance for regulatory environments.
Included Components
Scanner and Cables: Comes with the necessary scanner and cables for operation.
Optional Software:
Image Lab™ Software: PC-compatible software for image analysis.
21 CFR Part 11 Module: Security edition software for compliance with 21 CFR Part 11.
Installation and Operations Qualification (IQ/OQ) Kit: Optional kit to meet cGMP environment needs.
Isdexv D Dcjpfx Aaisii
Specifications:
Scan Area: 29 x 33 cm (transmissive and reflective)
Wavelength: 400 – 750 nm
Bit Depth: 16-bit grayscale
Success:
Your message has been sent.
Listing
Duxford
436 km
Sartorius F1 10KG Cylindrical Calibration Weight
SartoriusF1 10KG
Call
Condition: used, This listing is for a Sartorius F1 10KG Cylindrical Calibration Weight
The unit is in full working condition and is ready for immediate release.
Iiodpfx Aexv Aavsaioi
This is a high‑precision reference/test weight manufactured by Sartorius, made of stainless steel, with a nominal mass of 10 kg. It’s used primarily for calibrating, verifying and testing weighing instruments such as balances and scales. For example, the “Cylindrical Calibration Weight” line covers nominal masses from 1 g up to 10 000 g (10 kg) and this item falls at the top end of that range for the 10 kg value.
Because it’s manufactured to a high class (F1 / OIML F1) and often comes with traceable certification, it serves as a “standard” weight for checking or adjusting high‑capacity lab or industrial balance
We make it easier for you to find: "calibration ball"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Calibration Ball (4,151)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you




































































































































































































































































