Used Bandsawblade Sharpener for sale (544)

Condition: used, Fully automatic Stelliting machine Iseli SAA Hfjdpfxjckmfms Ag Njn

Condition: good (used), Year of construction: 1997, Deckel SOE burin grinder with stand. Accessories: collets, various grinding wheels. In good working condition. Hodpfxswcxt Us Ag Njfn

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, empty load weight: 8,500 kg, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hjdew U Dt Nspfx Ag Nsfn Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 1963, machine/vehicle number: 30769, saw blade diameter: 300 mm, input frequency: 50 Hz, input voltage: 380 V, Heller Brothers SA 315 -WKG 972 On offer here is an automatic saw blade grinding machine from Gebrüder Heller. Hodpfjurkypex Ag Nofn Technical data: Saw blade diameter: 300 mm Clamping angle: 20 ° Lateral displacement: 73 mm Power supply / connected load: 380 Volt 50 HZ Factory No.: 30769 Rated current: 2 A

Condition: good (used), Code: 0401 Brand: PERFECTA Model: 550/S Sharpening machine for saw bands Technical data: With base Grinding wheel diameter mm 140 Motor Hp 0,5 three-phase Setting unit Hfedpfxjuq Hhte Ag Njn Overall dimensions mm 600 x 550 x 1400 h Weight kg 120

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) Hfodpfx Asxablxog Njn - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25

Condition: good (used), Vollmer CA 300 with support trestles complete Hfsdpfx Aefbgvbsg Non

Condition: ready for operation (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 646, Alber Straightening Machine PLZ190 The machine was purchased directly and overhauled from Alber a good 12 years ago. Since then, it has been sitting unused in the workshop. Hfedpfx Agov Rmyto Non According to the data sheet, blade lengths from 5.0 m to 6.40 m and blade widths up to 120 mm can be processed. More precise data can be obtained from Zenz, as they acquired Alber and now manufacture the machines.

Condition: good (used), functionality: fully functional, This hammering machine is a model for processing wires. The wire was sharpened on this machine. The machine has been partially overhauled. The mechanical hammer drive was completely dismantled, reworked, greased and reinstalled. The outer parts of the machine were partially refurbished. However, the electrics are old but fully functional. The motor has also been refurbished and is 1.5 KW. The machine has a hammering tool for wire sharpening included, wire diameter up to 1.5 mm. The name of the machine is unknown, but we assume it is an HMP or Felss. Hfodpferqfxwex Ag Non

Condition: good (used), Year of construction: 1990, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 22554, Automatic rough grinding machine for carbide-tipped circular saw blades. Diameter from 80 to 800 mm. Hedjxlu A Uepfx Ag Nsfn

Condition: good (used), Year of construction: 1975, Schmid saw blade sharpening machine Saw blade sharpening machine type AS 4 for circular saw blades diam.: 20 - 400 mm for circular cut-off saws up to diam.: 550 mm tooth pitch up to: 22 mm Hedpfxoq S Uwbo Ag Njfn with dividing disk: 28 mm Saw blade width up to: 6.0 mm Grinding wheel diam.: 150 mm Grinding wheel speed: 3500 rpm. Infinitely variable speed control: 70 - 200 rpm. Drive power: 0.55 kW - Base frame - Grinding wheel - accessories used

Condition: new, roll diameter 520 mm throat 520 mm workpiece height 310 mm cutting speed 25 - 500 m/min table surface area 600 x 500 mm band length 3.880 x 3-16 mm mm Table tiltable up to 15° Grad work height max. 1000 mm total power requirement 1,5 kW weight of the machine ca. 500 kg. dimensions of the machine ca. 1,3 x 0,76 x 2,14 m Furnishing: Hfedexaazxspfx Ag Non - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm wide available scope of delivery: - saw band - Tape welding device with annealing device - halogen light - Scissors - grindstone - Chip brush - blow-out device - LED digital display - Longitudinal table groove

Condition: excellent (used), Vollmer GWM Stellitizing machine for band saw blades Hsdpfxjd Sr Spe Ag Nefn

Condition: excellent (used), Blanks grinder VOLLMER Model Vodo Wii 240 TS Hjdpfogg Nf Rsx Ag Njfn

Condition: good (used), Year of construction: 1995, operating hours: 10,500 h, functionality: fully functional, machine/vehicle number: 2048, Sharpening machine for circular saw blades on the front (face) side. Condition GOOD. Hjdpoxlu Azefx Ag Nefn

Year of construction: 1985, condition: excellent (used), Vollmer Cana SL Schärf machine for band saw blades Feed from left to right Technically checked and repainted Hodpfjdy Ifqex Ag Nofn

Condition: excellent (used), Year of construction: 1986, Brazing machine for carbide saws VOLLMER model LG21H Hfodpsfxxxdofx Ag Nen

Condition: excellent (used), Ibrahim Egalisieren machine for band saw blades Hodpfodwid Rsx Ag Nefn

Condition: excellent (used), Carbide saw side grinder VOLLMER model CHHF Hfsdpofl Hzuefx Ag Nsn

Condition: used, Rolling machine Hfsdpfx Aecq Nhcog Nen Max. Saw blade width 220mm

Condition: like new (used), Hollow face carbide saw grinder VOLLMER model MHZ Hfedpfx Agohcw N Es Njn

Year of construction: 1988, condition: used, Precision saw blade apparatus Hsdecrpz Sspfx Ag Nsfn Meinert PH 502 D with pneumatic blade clamping for circular saws with max. 2000mm Ø

Condition: good (used), Back off carbide saw grinder VOLLMER model NS700 Hfsdpegqalcofx Ag Non

Year of construction: 2002, condition: good (used), Vollmer CA 200 Hodpfx Asfbgvdeg Nsfn

Condition: good (used), Year of construction: 1977, Back off carbide saw grinder VOLLMER model NS120 Hjdpfx Agjf Rlgnj Nefn