Used Bandsawblade Sharpener for sale (531)

Condition: excellent (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, The grinding machine was purchased by us in 2022 and was in operation for five months. Todpfx Ajxrkqhjdlef This grinding machine greatly helped us to be independent from external service providers. The deep hole drills could now be quickly re-sharpened in-house, which also saved us a lot of money. The necessary grinding wheels, some of them new, are included in the delivery.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, empty load weight: 8,500 kg, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Todpfow U Dt Nsx Adljf Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2007, Fast root de-sharpening in cross-feed mode 75 kW milling shaft Todextif Tepfx Adlsf Including hydraulics

Condition: ready for operation (used), functionality: fully functional, Horizontal Block Band Saw BÖGLI ARL125 complete Machine operated in a small sawmill, processing approximately 100–200 solid cubic meters per year (as a secondary business). Roll crowning renewed about 7 years ago. Cutting length approx. 11 meters Cutting width (between guides) approx. 115 cm Main motor 22 kW Todpfsxvnz Sox Adljf Saw blade length 7780 mm Saw blade width 130 mm Roll diameter 1250 mm Rail length 21 meters Includes sharpening machine and 3 saw blades Machine will be dismantled by us and can be loaded by forklift. Available from end of December 2025.

Condition: used, Year of construction: 2008, The machines are in operation. The linear guides have been replaced. The machines are in excellent condition. Todpfx Adexx Ubwelsf

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2501001, type of input current: AC, Drill Bit Grinding Machine 0313 – Simple Drill Bit Sharpening for Everyone Achieve perfect results quickly and easily, even without professional training! It’s so easy! Sharpening your drill bit is completed in three steps: 1. Clamp the drill bit in the fixture Tedpfxoxnzrnj Adlsf 2. Grind the drill bit 3. Point/sharpen the drill bit tip Ready in less than a minute! Before clamping the drill bit, use the rotary knob on the grinding machine to set the required drill diameter. With the appropriate collet, the drill bit is positioned against the stop in the left holder of the machine and clamped in place. Sharpening the cutting edges and pointing the tip is straightforward: power on the machine, insert the fixture with the drill into the right holder, and turn gently from stop to stop – the first cutting edge is done. Then, rotate the fixture 180° to grind the second cutting edge. Pointing the tip works the same way, using the top holder. That’s it – simply switch off the machine and unclamp the drill bit. A brilliant design combines an eccentric mechanism with a specially engineered grinding wheel, so there’s no need to worry about edge profile or clearance angle. Additionally, both cutting edges are produced with exactly the same setting, guaranteeing perfect edge symmetry. The tip angle can also be freely selected between 90° and 140° before grinding. 21 highly precise collets for diameters from 3 to 13 mm in 0.5 mm increments ensure truly concentric clamping. The service life of the grinding wheel exceeds 5,000 applications. Besides the standard CBN grinding wheel for HSS tools, we also offer a diamond grinding wheel for carbide drills. Changing the wheel takes just a few moments and two safety switches prevent unintended start-up when the machine is open. The compact design and practical carrying handle make this drill bit grinding machine ideal for mobile use. All system tools, such as collets, fixtures or hex wrenches, are stored on the machine itself—so everything you need is always at hand. The drill bit grinding machines are energy efficient and even fit on any desk. Drill bit sharpening without prior knowledge – clean, fast and reliable! Included: - 11 collets for whole millimeter sizes (3 – 13 mm) - 10 collets for half-millimeter sizes (3.5 – 12.5 mm) - Standard CBN grinding wheel - Machine dimensions: 290 x 200 x 180 mm - Shipping weight: 12 kg

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 3074, feed rate Y-axis: 10 m/min, total length: 4,984 mm, workpiece height (max.): 60 mm, total width: 1,425 mm, edge thickness (max.): 3 mm, total height: 1,618 mm, overall weight: 1,400 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, extraction nozzle diameter: 140 mm, working height: 888 mm, input current: 32 A, input frequency: 50 Hz, extraction connection diameter: 140 mm, year of last overhaul: 2025, Due to the acquisition of a new machine, our reliable edge banding machine, purchased new in 2016, is now for sale. The machine has operated in a joinery workshop with 8 employees. It underwent a complete overhaul in January 2025. New radius scrapers, new milling tools, and new polishing wheels were installed. The pre-milling unit has been re-sharpened. The glue roller’s clutch has been replaced. The glue pot was completely refurbished and cleaned. The machine is suitable for both EVA granulate (e.g., Henkel Dorus KS351) and PUR adhesives. The degree of pre-milling, the edge material thickness, and the position of the lower and upper milling tools can be conveniently adjusted from outside the machine housing via manual handwheels. The control system allows custom edge banding programs to be saved. The machine automatically and pneumatically switches between 0.4 mm and 2.0 mm edge banding via program. Main specifications: - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100–150 l/min) - Touchscreen - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness, in rolls: 0.5–3.0 mm - Workpiece thickness: 8–60 mm (banding 60 mm thick materials possible) - Minimum workpiece width: 70 mm Tedpfxsxlr S Hj Adljf - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Processing units: - Diamond pre-milling (12,000 rpm) - Release agent tank/nozzle - Gluing station - End trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/nozzle - Flat scraper - Polishing wheel Price does not include VAT.

Condition: excellent (used), Year of construction: 2005, It is a precision measuring device for simple and fast measurement of through-hole drills and blind drills of burrs and end mills. This device is indispensable as basic equipment for modern tool shops, sharpening shops and CNC machine operators. The equipment is used in the woodworking and metalworking industries, as well as in glass and stone processing. Everywhere where tool inspection is required. It allows checking the dimensions of the tool its radii or profile and the quality of the cutting surfaces. Tedpfx Adsu Sbpcslof - measuring range: - Z axis 370 mm - X axis 115 mm - Total weight: about 200 kg

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip Todpsxablxjfx Adlef - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 2036, total height: 1,900 mm, total length: 1,400 mm, total width: 900 mm, overall weight: 600 kg, rotational speed (min.): 2,000 rpm, rotational speed (max.): 10,000 rpm, table length: 500 mm, table width: 200 mm, power: 2 kW (2.72 HP), Equipment: rotational speed infinitely variable, TECHNICAL DETAILS: - Machine number: 2036 - Operating voltage: 400 V - Frequency: 50–60 Hz - Rated current: 10 A Tedpfx Adewxrf Nelof - Connection: 2 kW - Grinding wheel diameter: max. 125 mm - Speed: 2,000–10,000 rpm - Table dimensions: 500 x 200 mm WORKING AREA & CAPACITY: - Indexing head center height: 170 mm - Tailstock center height: 120 mm (with intermediate support: 170 mm) - Workpiece diameter between centers: 338 mm - Workpiece diameter, overhung: 600 mm - Distance between centers: 950 mm - Internal taper, indexing spindle: Morse 4 / Unified 40 - T-slots, machine base: 12 mm - T-slots, additional elements: 8 mm TRAVEL DISTANCES & ADJUSTMENTS: - Sharpening stroke: 190 mm - Cross travel, tool holder: 100 mm - Vertical adjustment, grinding head: 325 mm - Axial adjustment, grinding spindle: 5 mm - Tool holder: 230 mm - Grinding head mounting: 800 mm - Indexing device on tool slide: 330 mm ROTATION / SWIVEL RANGES: - Grinding head mounting: 360° - Grinding heads: 360° - Tool holder: 360° - Universal device (horizontal/vertical): 360° OTHER FEATURES: - Spiral grinding/slotting lead: 0.80 mm - Maximum spiral sharpening length: 190 mm DRIVE & SPEEDS: - Three-phase motor: 0.7 / 0.85 kW - DC motor: 1.3 kW - Spindle speeds: 4,000 / 8,000 rpm (pole switching) - Stepless DC: 2,000–10,000 rpm - Grinding wheel diameter: max. 125 mm - Cutter wheel diameter: max. 200 mm ACCESSORIES: - Includes two-axis digital readout - Extensive machine accessories included

Condition: used, Year of construction: 2007, functionality: fully functional, used horizontal ZENZ block bandsaw type BN 110 S, stationary Year of manufacture: 2007; completely overhauled in 2022 Conveying technology year: 2022 Serial number: 141-8300 Equipment: • 22 kW drive motor • 7 m cutting length • 5 vertical supports • 2 log turners (+2 holders) • Log lifting preparation with frame • 4 level compensators with claws (+2 holders) • 1 log roller • 1 new pre-cutter • PLC control including cutting program • Seat mounted on armrests • Left: PLC - Right: joystick • 1 Zenz automatic sharpening machine type AHB (serial no.: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water cooling with 20 l tank and nozzle o Mounted on blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders • Log lifter preparation in frame o With control unit o Mount for pipe Tsdpfx Adjwlfdxoljf o Two mounts for cylinders • Hydraulic frame ejector for 820 mm • Green horizontal laser indicator Mechanisation consisting of: • Hydraulic folding frame for offloading at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors o Both roller conveyors operate simultaneously • Roller table 4 m long – slightly inclined with stop o All electric and hydraulic elements operable from the operator’s station The block bandsaw including conveyor technology is fully operational.

Condition: new, number 96 Positionen weight 600 kg condition neu 28 mm Special set 96 pieces, 28mm system, consisting of: 1x tool trolley 30x quick release bolts with twist lock short, without O-rings 8x universal stop 150 L - nitrided 4x universal stop 225 L - nitrided 8x stop and clamping angle 175 L - cast 2x stop and clamping angle 500 G left - nitrided 1x stop and clamping bracket 750 G left - nitrided 1x stop and clamping bracket 750 G right - nitrided 1x stop and clamping bracket 500 G left - nitrided 1x stop and clamping bracket 500 G right - nitrided 4x stop and clamping angle 300 G left - nitrided 8x prism Ø60-135 ° burnished - with collar complete with screw collar and countersunk head 16x professional screw clamps - nitrided 6x Professional screw clamp 45 ° / 90 ° - nitrided 4x universal stop 300 - nitrided 1x accessory set consisting of: Eccentric, Allen key, brush, sharpening stone, Probe CleanBasic, Probe non-stick and torch holder. Tjdped Rmbnsfx Adlsf

Condition: used, Drills Grinding Machine DECKEL SOE Spindle speed: 4500 RPM Maxi bore of clamps: 17,5 mm Maxi sharpenable radius: 10 mm Maxi lateral displacement: 10 mm Tsdpfx Adoxp Nypslof Angle adjustment: 45° Maxi displacement: 100 mm (see technical details) Delivred with 1 set of clamps + different diamond grinding wheels Voltage: 380 V Width: 600 mm Depth: 600 mm Total height: 1300 mm Weight: approx 150 kg

Condition: good (used), Tool measuring stand for measuring tool radius and height. Measurements can be read off digital read-outs. Technical details Tjdpfoxyqbvsx Adljf Tool diameter min - 100mm Tool diameter max - 300mm Tool length maximum - 330mm 220v - 50hz Weight - 180 kg Supplied with operating instructions. Supplied with 40mm or 50mm arbor as needed.

Condition: new, roll diameter 520 mm throat 520 mm Tedpfx Adjxaazxslof workpiece height 310 mm cutting speed 25 - 500 m/min table surface area 600 x 500 mm band length 3.880 x 3-16 mm mm Table tiltable up to 15° Grad work height max. 1000 mm total power requirement 1,5 kW weight of the machine ca. 500 kg. dimensions of the machine ca. 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm wide available scope of delivery: - saw band - Tape welding device with annealing device - halogen light - Scissors - grindstone - Chip brush - blow-out device - LED digital display - Longitudinal table groove

Condition: like new (used), Year of construction: 2025, functionality: fully functional, We offer machines, spare parts, and accessories for saw blade grinding machines of the types ECE 45 / EC 400 / EC 500 / ASG 1400 / ASG 2000 from the manufacturer "Schmidt Tempo". Tedeguxgpopfx Adlsf Thanks to our many years of experience, we can also support you with repairs of the above-mentioned machine types, including the supply of spare parts. NEW: Grinding spindles, used or new, available for ECE 45 / Freestyle, ECT 502, ECT 632/633, ASG 1400, ASG 2000, AS 9-12, AS 2-4, ASG 400/500, G400/500. If you have a specific requirement, please contact us by phone or email.

Condition: used, Max. cutting length: 2040 mm Tsdpfsvlwatox Adljf Max. sheet thickness: 3 mm steel Manual backgauge up to 500 mm Side stops and table extensions knife sharpened 2400 kg

Condition: new, grinding wheel diameter 250 mm Todpfx Aeupxhcsdlef connected load frequency 230 V 90 - 180 U/min weight of the machine ca. 18 Kg dimensions 470 x 300 x 440 m Knife sharpening device with variable speed Grinding wheel 250 x 50 x 12mm, grit 220 Leather disc 200 x 30 x 12mm

Condition: good (used), Year of construction: 1975, Schmid saw blade sharpening machine Saw blade sharpening machine type AS 4 for circular saw blades diam.: 20 - 400 mm for circular cut-off saws up to diam.: 550 mm tooth pitch up to: 22 mm with dividing disk: 28 mm Saw blade width up to: 6.0 mm Tjdpfsq S Uwbjx Adlef Grinding wheel diam.: 150 mm Grinding wheel speed: 3500 rpm. Infinitely variable speed control: 70 - 200 rpm. Drive power: 0.55 kW - Base frame - Grinding wheel - accessories used

Condition: excellent (used), CV saws grinder Heller model SA315 Tsdjxtbtcopfx Adljf

Condition: used, Gatter Saw Sharpening Machine Vollmer CNHV Year of manufacture: 1978 Gatter saw blade width: 60-160 mm Toothing length: max. 1450 mm Tsdpsxvz R Hsfx Adlsf Tooth pitch: 14 – 40 mm Tooth height: max. 25 mm Rake angle: 0° - 30° Blade thickness: 0 – 6 mm Grinding wheel: diameter 200 mm Working speed: 30, 50, 75 teeth per minute Tooth forms: 3 pcs Connected load: 2.1 kW Weight: 500 kg Including gatter saw set device Lorroch SGB 6 (similar to Meinert PH6D) year 1983

Condition: used, functionality: fully functional, Horizontal block bandsaw BÖGLI ARL150 with hydraulic clamping carriage including complete ALBER sharpening machine with back grinding device. The ideal machine for processing large logs. Cutting thickness is entered via a 'Mudata' control unit. A ripsaw for splitting is mounted directly on the saw frame. Blade wheel diameter: 1,500 mm Blade wheel width: 170 mm Cutting length up to 8 m Max. clearance: 1,900 mm 5 hydraulic clamping fixtures 3 hydraulic log turners Saw drive power: 45 kW Feed drive, frequency controlled: 5.5 kW (wire rope drive) Tjdpfx Aoxp Hzdedlsf The machine has been professionally dismantled by our skilled personnel and can be inspected in our warehouse by appointment.

Condition: used, Max. cutting length: 2040 mm Max. sheet thickness: 3 mm steel Tedjukhnnspfx Adljf Manual backgauge up to 500 mm Side stops and table extensions knife sharpened 2300 kg

Condition: new, grinding range 8 - 32 mm sharp cornered angle min./max. 90 - 140 Grad connected load 230 V weight of the machine ca. 16 Kg dimensions of the machine ca. 0,43 x 0,24 x 0,24 m Drill grinding machine: Additional station for grinding back the drilling cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Hard metals with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Tedpfxoupxh Ne Adlof Vibration-free running thanks to its heavy weight and rubber feet. Sharpening angle adjustable for all common twist drills. Package dimensions: 430 x 240 x 240mm. Weight 16kg.

Condition: new, Year of construction: 2025, TS 300 SD P Bench Grinder with dust extraction, machine stand, emergency stop button, and brake Smooth-running, maintenance-free motor Side-enclosed protective covers Sturdy, adjustable workpiece supports High level of safety thanks to adjustable spark deflectors Suitable for grinding, deburring, and sharpening all types of tools, metal profiles, etc. Motor protection switch and undervoltage release Double-sided spark/eye protection Connection cable with 16 A CEE plug One each of coarse and fine grinding wheels 12-month warranty for single-shift operation - Grinding wheel (mm): 300 x 40 x 51 - Machine dimensions without packaging (mm): 540 x 530 x 1,180 mm Tedpfx Aor Ez Uwodlef - Speed (rpm): 1,250 - Three-phase motor 400 V / 2.2 kW: Operating mode S2-30 min (Short-term operation) - Extractor motor 0.55 kW, suction capacity 350 m³/h - Weight (kg): 90 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!