Used Basket Dishwasher for sale (1,002)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket Tedpfx Aey Hkd Henlsb - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: used, mileage: 181,468 km, power: 110 kW (149.56 HP), first registration: 04/2000, fuel type: diesel, empty load weight: 5,750 kg, maximum load weight: 249 kg, overall weight: 5,999 kg, axle configuration: 4x2, brakes: engine braking, driver cabin: other, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 6, * German vehicle * 1st hand * Condition see pictures * Ruthmann aerial work platform * Type K 120 * 12 m working height * 7.05 m lateral outreach * only 8,813 operating hours * Workman basket with 200 kg. load * 1,000 V insulated workman basket * 180 ° angle of rotation * Workman basket size 1.30 m 1.00 m * 2-fold hydraulic support * Total vehicle height 3.55 m * 6 seats * Yellow rotating beacons * 5-speed transmission * Roof hatch * Aluminum checker plate cladding * Loading area 1.80 m x 2.45 m * Aluminum tail lifts * Emergency steering * Wheelbase 3.80 m * gross vehicle weight 5,990 kg * Self-propelled working machine and therefore free driving in all environmental zones Tsdpsy Rfunofx Anlob If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: good (used), Year of construction: 2006, lifting height: 25,000 mm, fuel type: diesel, General information Mileage: 112.606 km Weights Empty weight: 7.420 kg Functional Lifting capacity: 350 kg Working height: 2.700 cm Working width: 248 cm Dimensions of cargo space: 800 x 248 x 350 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1980 m Tsdpoy Rk U Tefx Anljb Max swing of platform in degrees: 540 Additional information Please contact Christian Theißen for more information Manufacturer: Wumag Model: WT 270 Year of build: 2006 Condition: Used Data: Max. working height: 27,00 m Max. platform height: 25,00 m Max. reach: 19,80 m Total dimensions LxWxH: 8,00 x 2,48 x 3,50 m Platform dimensions LxW: 1,60 x 0,80 m Max. basket load: 350 kg Swivel range: +/- 540° Ground pressure: 24/20kN Ground clearance: 0,20 m Support width vertical: 2,48 m Support width one side: 3,69 m Support width both sides: 4,90 m Support length: 5,03 m Empty weight: 7.420 kg Special features: Rotating work basket Information: The vehicle is sold as standard WITHOUT roof protection. TÜV and UVV new. Location: 41468 Neuss immediately available

Condition: used, Year of construction: 2000, workpiece weight per basket 250 kg basket dimensions max. mm Todsy Ty Diepfx Anljb voltage pneumatisch weight of the machine ca. 400 kg dimensions of the machine ca. 1,35 x 1,50 x 2,35 m

Condition: good (used), Year of construction: 2015, lifting height: 23,040 mm, fuel type: hybrid, Weights Empty weight: 3.000 kg Functional Lifting capacity: 200 kg Working height: 2.504 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1561 m Max swing of platform in degrees: 450 Additional information Please contact Christian Theißen for more information Tjdpfsy T Ei Dex Anleb Manufacturer: Teupen Model: Leo 25T Year of build: 2015 Condition: Used Data: Max. working height: 25,04 m Platform height: 23,04 m Max. reach: 15,61 m Platform lifting capacity: 200 kg Platform dimensions LxW: 1,22 x 0,82 m Swivel range: 450° Total dimensions LxWxH: 7,37 x 1,78 x 2,05 m Ground pressure: 21,8 kN Ground clearance: 0,40 m Support dimension: schmal BxL 3,19 x 5,30 m Support dimension: einseitig BxL 3,19 x 6,55 m Support dimension: beidseitig BxL 5,30 x 4,95 m Drive type: Hybrid (230V/Diesel) Empty weight: 3.000 kg Special features: Drive system, white rubber track, rotating work basket, optionally electric or diesel drive, hydraulically height-adjustable chassis for driving on slopes.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Frying machine, Roka / Kippfix SB 40B-S Frying machine without heating coils for approximately 360 pieces/hour of Berliner doughnuts / pastries 2 frying baskets & 1 steam lid Drip tray Connection 400V, 16A-CEE plug Used equipment Todpfx Aszfypmenleb Visit us!

Condition: excellent (used), Atlas Ci3000+ Xenon Weather-Ometer Manufacturer: Atlas Material Testing Technology LLC Type: Ci3000+ Model: Ci3000+ Weather-Ometer Machine Type: Xenon Weather-Ometer / Weathering Test Device For sale is a used Atlas Ci3000+ Xenon Weather-Ometer. The device is suitable for artificial weathering, light aging, material testing, quality control, as well as aging tests of plastics, paints, coatings, textiles, and materials. Technical Data Light Source: Xenon Arc Lamp Lamp Rated Power: 4,500 W Xenon Lamp Operating Range: 1,700 - 4,500 W Device Model as Displayed: Ci3000+ W Sample Sensor 1: Black Standard Sample Sensor 2: Black Panel Light Sensor 1: CI 300 - 400 nm Light Sensor 2: CI 420 nm Power Connection: 220 / 380 V Frequency: 50 Hz Connection Type: 3/N/PE Rated Current: 50 A Power Consumption: 9.5 kW Control Voltage: 24 VDC Compressed Air Supply Required Operating Pressure: 80 - 100 PSI / 552 - 689 kPa Compressed Air Consumption: approx. 4 CFM / 0.11 m³/min Dimensions approx.: 950 x 730 x 1,830 mm (W x D x H) Required Footprint approx.: 1,050 x 2,030 mm (W x D) Weight approx.: 404 kg Minimum Distance Exhaust Hood: approx. 102 - 152 mm Operating Data Equipment Touchscreen Control Panel Xenon Burner Test Chamber with Sample Basket Black Standard Sensor Black Panel Sensor CI 300 - 400 nm Light Sensor CI 420 nm Light Sensor Todpfszf D Rnsx Anlsb Water-Cooled Lamp System Exhaust Connection Interface Connections Integrated Humidification System Accessories / Documents Atlas Weathering Testing Guidebook Atlas Weather-Ometer Auxiliary Filter Lantern Kit Instructions Existing Documentation as Shown in Pictures Existing Accessories as Shown in Pictures Areas of Application Artificial Weathering Light Aging Test UV and Xenon Testing Material Testing Plastic Testing Paint and Coating Testing Textile Testing Automotive Industry Quality Assurance Research and Development Scope of Supply Atlas Ci3000+ Xenon Weather-Ometer Existing Accessories as Shown in Pictures Existing Documentation as Shown in Pictures Condition Used Good Optical Condition Optical Condition as Shown in Pictures Inspection possible by appointment. Scope of supply as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Condition: like new (used), Static Autoclave BARRIQUAND STERIFLOW 6 Baskets – Stainless Steel Static autoclave BARRIQUAND STERIFLOW with a capacity for 6 baskets, designed for the sterilization and thermal treatment of packaged food products in industrial processes. Manufactured by BARRIQUAND STERIFLOW, a specialist in thermal treatment systems, this autoclave is designed to operate using controlled cycles of heating, sterilization, and cooling, guaranteeing reproducible process conditions. Its industrial construction in stainless steel, together with the automatic control system, allows it to be integrated into canning plants and production lines that require pasteurization or thermal sterilization processes. Tsdpjzbmvmefx Anlob MAIN FEATURES Manufacturer: BARRIQUAND STERIFLOW Type: Industrial static autoclave Capacity: 6 baskets Application: Sterilization / thermal treatment Batch process Horizontal chamber Stainless steel construction Large-diameter front door Mechanical safety locking system Automatic cycle control Control panel with Siemens HMI Control of the different process parameters Integrated piping and valve system Designed for industrial operation Suitable for integration into sterilization lines PROCESS The BARRIQUAND STERIFLOW 6J is designed to perform controlled thermal treatments of previously packaged products. The baskets with product are placed into the autoclave chamber, and once closed, the programmed cycle is automatically executed, controlling the different phases of heating, thermal holding, and cooling. The system allows processing different types of packages and products according to the recipe, sterilization parameters, and installed configuration. It can be integrated with: Basket loading and unloading systems Basket conveyors Automatic loaders and unloaders Process water preparation systems Automatic sterilization lines Handling and palletizing systems APPLICATIONS Especially suitable for canning industries, manufacturers of ready meals, pet food, and other food processing plants that need to sterilize or pasteurize packaged products. Depending on the configuration and process, it can be used with cans, jars, trays, pouch bags, and other packaging suitable for thermal treatment in an autoclave. The combination of BARRIQUAND STERIFLOW technology, a capacity for 6 baskets, and automatic process control provides a robust solution for industrial sterilization facilities. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: good (used), Year of construction: 2000, fuel type: electric, Weights Empty weight: 2.900 kg Functional Mast: articulated arm Lifting capacity: 215 kg Working height: 1.200 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 600 m Additional information Please contact Christian Theißen for more information Manufacturer: Sky High Model: ST120 Tedpfszdq Rxex Anleb Year of build: 2000 Condition: Used Data: Max. working height: 12,00 m Max. platform height: 10,00 m Max. reach: 6,00 m Drive type: Battery Total dimensions LxWxH: 4,75 x 1,50 x 2,40 m (1,85 m) Platform dimensions LxW: 1,10 x 0,65 m Max. basket load: 215 kg Swivel range: 2x 359° endlos Empty weight: 2.900 kg Special features: Very narrow and short stage, usable on solid and even ground indoors or outdoors.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 476 h, overall weight: 11,860 kg, power: 407 kW (553.37 HP), Engine: Deutz TCD 12.0 L6, 407 kW Year of manufacture: 2024 Serial number: 21060084 Location: NRW Total operating hours: 476 h Tsdpfszcn Igox Anlob Engine operating hours (new): 91 h Rotor operating hours: 207 h Availability: by arrangement Equipment: 2 horizontal infeed rollers 2 vertical infeed rollers Infeed size: 1000 x 625 mm Max. log diameter: Ø 620 mm Number of knives: 3 pcs. Counter blade: 1 pc. Capacity: up to 150 m³/h Weight: 11,860 kg Radio remote control Spiral fan HD infeed chain Baskets: 50, 70, 100 mm The machine is in excellent, like-new condition and can be inspected during chipping operations by arrangement! Warranty: The machine is sold in the condition it is in at the time of delivery. The seller assumes no liability for defects. We reserve the right to make interim sales, changes and repairs. This overview serves only as a source of information and does not constitute a binding offer.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PSP-26001, pressure: 0.4 bar, total width: 500 mm, total length: 500 mm, total height: 1,950 mm, overall weight: 75 kg, warranty duration: 3 months, manhole location: bottom, empty load weight: 50 kg, input voltage: 230 V, machine base height: 250 mm, type of input current: AC, volume flow: 0.15 m³/h, Equipment: documentation/manual, type plate available, Continuous-flow pasteurizer (throughput volumes depend on operating time, hygiene, and precision): • Performance and investment suitable for small on-farm dairies as well as local processing workshops: 700 liters in 6 hours. • Base of 50x50cm, 200cm high. Removable side guards. • Gravity-fed milk flow: provides stable flow and smooth regulation. The milk or juice is fed or pumped into an intermediate container at a height of 4 meters and flows from there to the bottling station. • A pump supplies this container at the elevated height. It also ensures effective cleaning through intense detergent circulation. • Manual control by the operator at the bottling station with alarms for "too fast" filling (incomplete pasteurization) or "too slow" filling (product overheated): the operator can then slow down or speed up the bottling process. • No contact with air: Hygienic and precise processing! • Only 2.2 kW of electricity to pasteurize more than 120 liters per hour (700 liters per day). Automatic control of the water bath temperature with a setpoint between 70 and 92°C (from thermization at 65°C to "cooking" for yogurt at 85°C). • The basic pasteurizer consists of: 1. a heat exchanger between the incoming (cold) milk (or juice) and the pasteurized milk (or juice) (72°C), 2. a heating tank (2.2kW, temperature adjustable to 5°C above the pasteurization setpoint) in which a coil is immersed, through which the liquid exiting the heat exchanger circulates, 3. a well-insulated holding tube where the milk/juice is kept for 15 seconds at the pasteurization temperature, 4. a temperature controller to illuminate a light if the liquid is too cold and another if the liquid is too hot, 5. a tube leading to the elevated inlet container, tubes connecting all components, one or two tubes with a Mohr clamp for manual filling of bottles (optional bottling unit) or jars (one at a time), 6. a drain valve at the lowest point (after pasteurization and holding, and before returning to the heat exchanger): allows the circuit to be emptied down to the last drop of pasteurized product. Tjdpfx Anjzg Dlbslob 2. Transfer pump with controls: • Prevents the need to transport milk or juice by pumping it from where it is located (tank on a trailer, refrigerated tank, receiving tank, container, etc.) to the inlet tank of the pasteurizer on the upper floor. • Automatic pause when the inlet tank of the pasteurizer is full (conductivity probes). Automatic restart when the level drops. • Performance between 8 and 25 liters per minute (depending on the height difference). • Also ensures powerful cleaning of the entire pasteurization circuit. • Food-grade design and materials. • Electrical consumption of 400 W. • Option: 200µm basket filter for wort, juices, and herbal extracts with moderate alcohol content. 3. Option: "Manual gravity-fed bottling unit with automatic stop, 180 liters per hour": twice the throughput with less work!

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: Tjdpezii A Rofx Anljb 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: used, Newtec H3013MD 13-Lane Linear Weigher with Elevating Belt – Double PCS (2013) The Newtec H3013MD is a high-capacity 13-lane linear weigher featuring an integrated elevating belt and a Triple PCS (Portion Collection System). This dual collection system enables significantly higher throughput by collecting and discharging two weighed portions simultaneously, making it an excellent solution for high-speed fresh produce packing lines. Designed specifically for products such as potatoes, onions, carrots, tomatoes, citrus fruits and other fresh produce, the H3013MD combines accurate weighing with gentle product handling and exceptional reliability. The hygienic stainless steel construction and proven Newtec technology make it a popular choice for demanding packing operations. Technical Specifications - Manufacturer: Newtec - Model: H3013MD - Type: 13-lane linear weigher with elevating belt - Serial number: 10729 - Year of manufacture: 2013 - Power supply: 400 V - Phase: 3 Ph - Frequency: 50 Hz - Current: 9 A - Number of weighing lanes: 13 - Lane length: 730 mm (13x) - Gutter width: 95 mm (13x) - Weighing basket dimensions: 140 × 95 × 170 mm (13x) Key Features - 13 independent weighing lanes for accurate portioning - Double PCS (Portion Collection System) for increased output and higher packing speeds - Integrated elevating belt for continuous and even product feeding Tedpozilitjfx Anlob - Gentle handling of delicate products - Hygienic stainless steel construction - Easy access for cleaning and maintenance - Suitable for a wide variety of fresh produce applications - Proven Newtec technology known for its reliability and accuracy - Easily integrated into existing packing lines The machine is in good overall condition and is available for inspection. Additional photos, videos or a live demonstration can be provided upon request. Contact us for pricing, availability or additional information. * Manufacturer: Newtec * Model: H3013MD * Serial number: 10729 * Year of manufacture: 2013

Condition: used, Espec Type: TSD-100 100 liters usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60°C to +200°C Temperature range cold chamber: -70°C to 0°C Test chamber interior dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Todpfx Anezizl Relsb Overtemperature protection Operating hours counter Mobile design (on castors) 2 stainless steel specimen baskets Cable entry port ⌀ 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon passing inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Condition: used, KEK Kemutec rotary screening machine Type: K800 Housing is steel, coated Rotor and sieve basket (4mm) are made of stainless steel Tsdpfszh Nmtox Anljb Completely overhauled and fitted with new bearings, seals, and electric motor See our other listings

Condition: good (used), Year of construction: 2014, lifting height: 20,350 mm, fuel type: diesel, Weights Empty weight: 3.260 kg Functional Lifting capacity: 200 kg Working height: 2.235 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 1418 m Max swing of platform in degrees: 225 Transport dimensions (LxWxH): 6,47x2,12x3 Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: TB 220.2 Year of build: 2014 Condition: Used Data: Max. working height: 22,35 m Max. platform height: 20,35 m Max. reach: 14,18 m Total dimensions LxWxH: 6,47 x 2,12 x 3,00 m Platform dimensions LxW: 1,37 x 0,66 m Max. basket load: 200 kg Tsdpfxoyxf Nbj Anlob Swivel range: 225° Ground pressure: 27 kN (front) / 16 kN (back) Ground clearance: 0,16 m Support width vertical: 2,12 m (front) / 2,12 m (back) Support width one side: 2,82 m (front) / 2,73 m (back) Support width both sides: 3,52 m (front) / 3,34 m (back) Support length: 4,15 m wide/ 3,19 m narrow Empty weight: 3.260 kg Total permissible weight: 3.500 kg Special features: Rotatable work basket 2x55°, maximum setup tilt 5°, loading area with side panel 1.05 x 2.13 m. Information: Tüv und UVV new

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2475678, power: 55.2 kW (75.05 HP), load capacity: 227 kg, lifting height: 26,210 mm, platform length: 1,830 mm, platform width: 910 mm, overall weight: 17,556 kg, transport length: 10,590 mm, transport width: 2,490 mm, transport height: 3,130 mm, fuel type: diesel, tire size: 18-625, color: red, Technical Data Year of manufacture: 2020 Engine: Diesel 55.2 kW (74 HP) Working height: 28.21 m Platform height: 26.21 m Lateral outreach: 23.42 m Tjdjyyl A Depfx Anljb Working outreach: 24.07 m Platform dimensions (L x W): 1.83 m x 0.91 m Overall dimensions (L x W x H): 12.95 m x 2.49 m x 3.00 m Slew range: 360° Load capacity: 227 kg / 341 kg Basket arm length: 1.68 m Weight: 17,556 kg Climbing capability: 45% Travel speed: 4.8 km/h General signs of use, fully functional

Condition: excellent (used), Rotary Autoclave BARRIQUAND STERIFLOW 5 Baskets – Industrial Sterilization BARRIQUAND STERIFLOW rotary autoclave with a capacity of 5 baskets, designed for the sterilization, pasteurization, and heat treatment of packaged food products through industrial batch processes. The equipment incorporates a load rotation system during the thermal cycle, allowing the packages to be kept in controlled motion throughout the process. This technology is particularly interesting for products where heat transfer can benefit from agitation, promoting homogeneous heat treatment and, depending on the product and format, optimizing process times. Its 5-basket configuration provides a high capacity for industrial production facilities. MAIN FEATURES -Manufacturer: BARRIQUAND STERIFLOW -Type: Industrial rotary autoclave -Capacity: 5 baskets -Application: sterilization / pasteurization -Load rotation system -Batch heat treatment -Horizontal chamber -Industrial construction in stainless steel -Large diameter front door -Mechanical safety locking system -Motorized drive for rotation -Automatic control of process parameters -Integrated piping and valve system -Designed for industrial operation -Integrable into automatic sterilization lines PROCESS The 5-basket BARRIQUAND STERIFLOW rotary autoclave is designed to perform controlled heat treatments on previously packaged products. The baskets are placed into the chamber, and once closed, the programmed cycle is executed through the heating, thermal holding, and cooling phases. During the treatment, the system allows for controlled rotation of the load, generating product movement within the package when its characteristics allow. This can favor heat transfer and achieve a more uniform thermal distribution. It can be integrated with: -Basket loading and unloading systems -Basket conveyors -Automatic loaders and unloaders -Transfer systems -Process water preparation equipment -Automatic sterilization lines APPLICATIONS Especially suitable for canning industries, manufacturers of ready-made meals, sauces, vegetable products, meat products, pet food, and other food industries that require industrial sterilization or pasteurization processes. Depending on the configuration and process, it can be used with cans, jars, and other packaging compatible with heat treatment and rotation in the autoclave. The combination of BARRIQUAND STERIFLOW technology, rotary system, and 5-basket capacity provides a particularly interesting solution for industrial sterilization facilities with high capacity. Tedpfxszbt Szj Anlsb Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: good (used), Year of construction: 2016, lifting height: 14,150 mm, fuel type: diesel, General information Mileage: 41.638 km Weights Empty weight: 3.290 kg Functional Lifting capacity: 300 kg Working height: 1.615 cm Dimensions of cargo space: 606 x 220 x 290 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Max swing of platform in degrees: 400 Additional information Please contact Christian Theißen for more information Manufacturer: Multitel Model: MT162 Year of build: 2016 Condition: Used Data: Max. working height: 16,17 m Max. platform height: 14,17 m Max. reach: 11,18 m Platform dimension WxD: 1,40 x 0,71 m Tsdpezfhwxofx Anlob Max. basket load: 300 kg Swivel range: 400° Support width vertical: 3,53 m Support width one side: 2,88 m Support width both sides: 3,53 m Transport dimensions LxWxH: 6,06 x 2,20 x 2,90 m Driving license category: 3/B Empty weight: 3.290 kg Total permissible weight: 3.500 kg Special features: Rotatable work basket, socket in the basket, supports, HV support. Information: Tüv und UVV new, with roof protection. Location: 41468 Neuss immediately available

Condition: good (used), Year of construction: 1987, overall weight: 42,000 kg, total width: 6,000 mm, total length: 7,800 mm, total height: 3,900 mm, sheet thickness (max.): 22 mm, Flanging and dishing machine SCHLEIFSTEIN - KBol 4022 MACH-ID 9659 Make: SCHLEIFSTEIN Type: KBol 4022 Year: 1987 Range off edge radius Manual 20 - 500 Range off edge radius Automatic 150 - 500 Hydraulic Controllable forming roll drive Hydraulic displacement drive Clamping device without hole Max. pressure manipulator 2000 Psi / 140 bar Max. pressure press 5700 Psi / 400 bar Max. speed forming roll 170 M/Min Kunkel head forming rolls: R = 350 R = 300 R = 275 R = 250 R = 200 R = 175 R = 150   Basket bottem Knocker bottom Pressure vessel bottom Boiler bottoms Flat floor Plate base diffuser bottom Tank bottom Tank bottom Radar reflectors Engine parts Dispense air Silo hoppers Cooker hoods Container parts Hemispheres Tsdpfxezfi Hho Anlsb Max. workpiece: 4600Ø Maximum sheet thickness:22mm Max. dishing radius: 700mm Min. product Ø: 800 Min. plate thickness: 4mm Min. dishing radius: 35mm Power: 90kW Length: 7800mm Width: 6000mm Height: 3900mm Weight: 42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 660,885 km, first registration: 08/2000, fuel type: diesel, wheelbase: 4,570 mm, fuel: diesel, color: white, gearing type: mechanical, Year of construction: 2000, Truck / Convenience Store MAN 12 224 First commissioned: 10.08.2000 Manual transmission 660,885 km Breakdown/sliding platform Length: 5.3 meters Width: 2.3 meters Height from the ground: 1.05 meters With hydraulically adjustable winch. With heavy-duty basket Payload: 4870 kg Total weight: 11,990 kg Tires: +/- 30% Tedpfxjzic H Ao Anlob Cevoman bvba. Lenskensdijk 5 2200 Herentals Belgium

Condition: used, Year of construction: 2007, - Brand: Niftylift - Type: HR21 D 4x4 - Year of manufacture: 2007 - Hours : 1773 - Weight: 6350 kg. - Engine: Kubota Diesel - Working height: 21 meters - Lateral reach: 13.2 meters - Lifting capacity: 225 kg. - Rotating work basket - Safety inspection possible - Aerial work platform book available - CE document available - Trade-in and transport possible * Brand: Niftylift *Type: HR21 D 4x4 Tedpfxszmu Ugo Anljb * Construction year: 2007 * Hours: 1773 * Weight: 6350 kg. * Engine: Kubota Diesel * Working height: 21 meters * Lateral reach: 13.2 meters * Lifting capacity: 225 kg.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,927 kg, axle configuration: 3 axles, first registration: 06/2019, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Todpfsztprmsx Anlob Variable height double deck with 22 ALU beams Loading capacity 33 / 66 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 710 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 8 mm Front right - 8 mm Middle left - 13 mm Middle right - 13 mm Rear left - 7 mm Rear right - 8 mm

Condition: ready for operation (used), IBS Maxi 91-2 washing machine, parts washing machine Washing tank: 190 liters Basket load: 200 kg Heating power: 6 kW Total power: 8 kW Serial number: 09.102.226L Usable height: 500 mm Basket diameter: 910 mm Heating temperature: 0-60°C You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and see our other offers. Todpfezq Addjx Anljb The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 02343, EVT GIGANT Vapor Degreasing System The system offered is ideally suited for the reliable removal of oils and oily residues from metal parts using the vapor degreasing process. Thanks to the generously sized work basket, high throughput rates are possible. Since this design does not include flooding of the work chamber, the required solvent volume remains relatively low, despite the large chamber size. This system is in good used condition and can be inspected and tested in our technical center in D-75447 Sternenfels by arrangement. Technical highlights: - The system recently underwent a comprehensive maintenance service by EVT. - The system was inspected for compliance with the German Federal Immission Control Act (BImSchV) by Chemlab as recently as March 2026. - The system was approved by DEKRA in July 2026. System features: - Closed system without exhaust air - Top loading - Rotating and pivoting device - Spray device - Flooding device with heated feed tank - Vapor degreasing - Recirculating air drying - Activated carbon module (designed for 2-shift operation) - Atmospheric distillation - Solvents that can be used: Perchloroethylene (PER) - Basket dimensions L/W/H: 1100x450x370 mm (internal dimensions) or alternatively 6 x 480x320x200 mm (external dimensions) Tsdpfx Aozrw Dbenljb - Throughput: max. 2 batches/h - Compressed air: 6 bar System availability: from October 2026 P.S. This offer is non-binding and subject to change. Modifications, errors and prior sale expressly reserved.