Used Bottle Washer for sale (2,491)

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: - Capacity: 9,500 bph Gobwsvrfivextbaeuh - Cell Pitch: 95 mm - Bottles per row: 25 - Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg - YOM 2024 - Formats: - 0,25l - 0,33l - 0,5l - 0,75l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Gusbwjt Ul Exoxtbaeh

Condition: used, Year of construction: 1995, Overview  This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is out production and be viewed in person in our warehouse. Techn. Details - Capacity:  - 6,000 bph - Min/ Max: 3,000 bph – 6,300 bp - Bottle type: 0,5L, Euro, NRW, incl. Set of parts for 330ml vichy bottle - Bottles per row: 12 - Bottles in the machine: 1,080 - Bottle cell carriers: 96 - Dimensions:  - Length: 6,000 mm - Width: 1,545 mm - Height: 2,175 mm (without feet) - Weight: approx. 5,800 kg - Water consumption: 3,6 m³/h - Heat consumption 80°C: 480 kJ/ h x 1000 Gjbwovl Huaextbasuh - Electrical consumption: 11 kW - Incl. Spare parts - Motors for rear and front drive - Bottle cell carriers - Wear parts - Machine body fully in stainless steel - All hot zones with 5cm insulation - Label extraction belt - Heat exchanger in stainless steel for low pressure steam 116°C-120°C at 0,7 - 1 bar - Self cleaning spray tubes in stainless steel

Condition: used, Year of construction: 1995, Overview The bottle washer "Sirio 7" from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar Gsbwxtbetrbrqsaeuh

Condition: used, Year of construction: 2013, Overview The bottle washer was manufactured by the German company Krones in 2013 and put into operation in 2014. It has been serviced annually. In addition, tenside lye cleaning and spare parts can still be purchased. DISMANTLING INCLUDED. Technical data  Capacity: 66,000 bph Maximum bottle diameter 69 mm Set up for the following formats:  Vichy 0,33l Long-Neck 0,33l Long-Neck 0,5l NRW 0,5l  Steinie 0,33l Gebwxjl Hx Enotbasuh

Condition: used, Year of construction: 2005, Overview The bottle washer was previously used in a mineral water factory. Due to the good maintenance, the machine is in good condition. All basins and the machine body are made of stainless steel. The machine is still working and will be free in early 2027, when the complete line is replaced. Tech Specs - Capacity: 15,500 bph - Cell Pitch: 95mm - Bottles per row: 16 - Dimensions + Weights: Housing: 8350 x 1,860 x 2,990 mm / 21,750kg Ready for operation with attachments: 8,700 x 3,560 x 3,330mm / 37,639kg - YOM 2005 - Formats: - 0,5l - 0,75l The Machine in Detail / Equipment Features - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Label press mounted to the machine - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths Gsbozbha Hewxtbaeuh - Spindles SST - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge

Condition: used, Bottle washer, make Krones, type: KES 1-5-190/14-110 R, single-end machine in stainless steel, for 13.200 bph, 14 bottles/row, with 110mm cell pitch, with pre rinsing, presoak bath, caustic soaking and caustic spraying, 4 water spraying (2x warm + 1x cold + 1x fresh water), with headboard disinfection, S7 control, built 1996. L: ~12.500 mm, W: 4.645 mm, H: 3.500 mm, weight: 33.000 kg Gujbworxuv Ajxtbajh

Condition: used, Year of construction: 1996, Overview This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is still in production and be viewed in person. Techn. Details   Capacity:  10,000 bph Min/ Max: 5,000 bph – 13,000 bph Bottle type: 0,5L, Euro, NRW Bottles per row: 10 Bottles in the machine: 1,980 Bottle cell carriers: 204 Dimensions:  Length: 8,100 mm Width: 1,395 mm Height: 2,300 mm (without feet) Weight: approx. 9,210 kg Water consumption: 4,0 - 4,8 m³/h Heat consumption 80°C: 700 - 840 kJ/ h x 1000 Electrical consumtion: 17 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Gebwxtju H R Nnjbaeuh

Condition: used, Year of construction: 1999, Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: - Capacity: 6,700 bph - Cell Pitch: 102 mm - Bottles per row: 10 - Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Gobwxtbswg E D Isaeuh Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg - YOM 1999 - Formats: - 0,33l - 0,5l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Condition: used, Year of construction: 1993, Overview This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Technical Data - Manufacturer: Klinger - Type: BC 16/1 - Year of manufacture: 1993 - Application: Returnable glass bottles - Material: Full stainless-steel construction - capacity: 20.000 bottles/h Features - Complete stainless-steel construction - Steam extraction system - Finger infeed and finger discharge - Chemical dosing system - Rotating spray pipe system - Lauer control panel - Conductivity measurement Gobwsyb Sxaextbajuh - Stainless-steel filter inserts - Plate heat exchanger - Compatible with standard bottle formats

Condition: used, Year of construction: 2002, Bottle washer, make Krones, type: Lavatec KESK 245/17-120, control range 4.000 - 11.000 bph, for bottles with max diam. 105mm, built 2002, single-end machine, 180 rows of 17 bottle pockets, removed label outfeed in bin, with pre-soak bath water + caustic, 1+2 caustic jetting, 1+2+3 water jetting hot+cold+fresh, for sale. Guobwxjrxup Setbaoh

Condition: used, Year of construction: 1998, Overview  This bottle washer was manufactured in 1998 by the German company PAC. The CB 14-0,5L-R-7 LII Compact model is a fully automatic returnable glass bottle washer designed for medium-capacity beverage filling lines. With a throughput of 7,500 bottles per hour, it ensures effective cleaning through a multi-stage process using caustic and hot-water baths. The unit has 14,175 operating hours and is in good working condition. Technical data - Capacity: 7,500 bottles/hour - Adjustable speed range: 3,750 – 7,875 bottles/hour - Cycle time: 6.72 seconds - Total treatment time: 11.65 minutes - Bottle formats: Up to Euro-NRW - Bottle rows per carrier: 14 - Bottles inside machine: 1,456 - Bottle carrier trays: 110 - Effective spray times: - Hot lye 8.96 seconds - Lye II 8.96 seconds - Hot water II 8.96 seconds - Hot water I 8.96 seconds - Cold water: 13.44 seconds Gobwxtbsxn A S Noaouh - Fresh water max.: 8.96 seconds - Utilities - Water consumption: 3.25 – 3.38 m³/h at 60°C - Power connection: 12.0 – 12.9 kW - Thermal energy consumption: 3,528 × 1000 kJ/h - Dimensions - Length with cabinet: 7,020 mm - Width of frame: 1725 mm - Height: 2300 mm

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Guobwxtol Hx Adjbaeh

Condition: used, Year of construction: 2007, Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data - Manufacturer: KHS - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm - Weight approx.: 33.5 t machine, 62.6 t operating - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Equipment - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader - Gearbox monitoring with torque protection - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Gebwxszzz Ivotbaeuh Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Year of construction: 2017, condition: used, This listing is for the Agilent Biotek 405 TS Microplate Washer The unit is in full working condition and is ready for immediate release BioTek 405 TS Microplate Washer 405TSRS Plate Carrier Source Bottle Waste Bottle Communication and power cables, and hoses Configuration Details: Manifold Type: 96-tube (8x12) Microplate Types: 96; Standard Plate Profile Volume Range: 50 – 3,000 uL/well Shaking: Yes Soaking: Yes Sonication: Yes Number of Dispensing Liquids: 1 Wash Speed: 96-well, 3 cycles, 300 uL/well: Guobwxtbexv D Hwjajh

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer Gobwxtbsz R T Aksasuh • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2020, condition: excellent (used), The Moba CTW6500 automatic industrial machine designed to denest, wash, stack, and dry plastic egg trays at a capacity of up to 6,500 trays per hour. High Capacity: Processes up to 6,500 plastic egg trays per hour to keep up with large egg grading and processing facilities. Full Automation Cycle: Automatically performs the entire handling and cleaning sequence, including de-nesting (separating stacked trays), washing with water and detergent, drying, and stacking clean trays for reuse. Gebwxez D Uurotbaeuh Hygienic Design: Built for poultry farms and packing stations to meet strict biosecurity and food safety standards by removing dirt, egg residue, and contaminants Complete and in good working condition Shipping can be arranged

Condition: used, Itec Boot & Sole Washer Entry and exit motion sensor activation Fully stainless steel Soap / detergent dosing facility E-stop Ready for use Gusbez Nx Iuswxtbash

Condition: used, Year of construction: 2017, Overview Complete dressing line for sparkling wine in 750 ml glass bottles, rated at 5,000 bottles/h. The line runs from bottle washing and drying through capsuling and labelling to tray forming, wrap-around packing and vertical packing, linked by approximately 50 m of bottle conveyors, tray conveyors and two accumulation tables. The labelling machine dates from 2017, the packaging end from 2002 and the bottle washer-dryer from 2005. The line is still in production and can be visited on request. Technical data - Year of manufacture: 2017 (labelling machine); remaining machines 2002 to 2005 - Output: 5,000 bottles/h - Product: sparkling wine - Bottles: glass, 750 ml - Bottle conveyors: approx. 50 m total length - Accumulation tables: 2 - Electrical cabinet with power supply and automation included Scope of Delivery - Bottle washer and dryer | CAMES | WDT-12 | 2005 - Capsuling machine | Robino & Galandrino | ZENITH Z 2/16 OTTICO | 2004 - Labelling machine | Sacmi | KUBE K60 | 2017 - Tray former | CERMEX | F28.40 | 2002 - Tray former | CERMEX | F28.40 | 2002 - Bottle deviator | CERMEX | 2002 - Vertical packer | CERMEX | AN90 | 2002 - Wrap-around packer | CERMEX | WB45.00 | 2002 - Laser coder | LINX | SL301 Gobwez Dtymoxtbajuh - Hot-melt unit | Nordson - Bottle conveyors | Bobard, Thierion, Anduze | approx. 50 m total length | 2017 - Tray conveyors - 2 accumulation tables - Electrical cabinet with power supply and automation Condition In production. Inspection on site by appointment. Availability Available from 29 January 2027. Location: France.

Condition: used, Year of construction: 2007, Overview Complete wine bottling line with KHS and Krones machines for 0.75 l glass bottles, rated at 12,000 bottles per hour. The line runs from depalletizing, bottle washing and empty bottle inspection through the KHS Innofill NRF filler-closer monoblock (natural cork or aluminium screw caps) to capsuling, labelling, case packing and robotic palletizing. A KHS process area with cartridge filtration and a wine warmer-cooler prepares the wine ahead of the filler. The line is still installed and can be inspected on site. Technical data - Product: still wine - Containers: glass bottles, design bottle 0.75 l - Line output: 12,000 bottles/h - Closures: natural cork, aluminium roll-on screw caps, shrink capsules - Years of manufacture: 2006 - 2023 Scope of Delivery Type | Manufacturer | Model | Description | Year | Listing Bottling line - Glass depalletizer | Krones | PRESSANT UNIVERSAL 1N | sweep-off depalletizer, layer-pad and empty-pallet handling, 14,000 containers/h | 2023 | - Bottle washer | KHS | INNOCLEAN | single-end washer for returnable glass, up to 14,500 bottles/h, drive and panel modernised in 2022 | 2007 | - Empty bottle inspector | Krones | LINATRONIC M | base, finish, thread, sidewall and residual liquid inspection | 2018 | - Filler-closer monoblock | KHS | INNOFILL NRF | 50 filling valves, cork closer and Zalkin roll-on capper with 10 heads each, CIP, 12,000 bottles/h | 2007 | - Capsuling machine | Kematec | MBK 12 AS | shrink capsules, 12 heating stations, up to 12,000 bottles/h | 2006 | - Bottle dryer | Kematec | T20-3 KMT | air-knife tunnel | 2006 | - Labeller | Krones | ERGOMODUL | 2 cold-glue and 2 self-adhesive stations | 2020 | - Case packer | KHS | INNOPACK SP | pick-and-place packer, KUKA controller | 2006 | - Palletizer and stretch wrapper | ABB, Strapex | FLEXPALLETIZER, SWR 30 | 2 robot cells, pallet destacker, ring wrapper | 2007 | - Pallet labeller | Logopak | LOGOMATIC 920 II PF | print-and-apply | 2007 | - Conveyors | all connecting bottle, case and pallet conveyors of the line Process area - Filtration system | KHS | CORVUS | cartridge microfiltration, 4 housings | 2007 | - Wine warmer-cooler | KHS | INNOPRO | plate heat exchanger, up to 9,900 l/h | 2006 | Condition Gusbwxtjz I Rcaebaoh Used, still installed. Each machine is also listed on its own page with full technical data and photos - follow the link at the end of each row in the scope of delivery. Availability Available immediately. Location: Belgium. Delivery terms: Ex Works Belgium.

Condition: new, Thermo Scientific Wellwash Microplate Washer Description Reliably wash 96-well plates with the Thermo Scientific Wellwash, a user-friendly and reliable microplate washer for routine ELISA applications. The washer features a graphical user interface, various language versions, and a USB port for optimal user-friendliness and excellent convenience. Features: Large, clear color display and keypad ensure ease of use The user interface is logically and intuitively designed, enabling quick protocol programming User-friendly software requires only minimal training and ensures a quick start Pressure-free bottles are safe to use Liquid level sensors in the wash and waste bottles ensure safe operation Gebwxtstzb D Djbaeuh Automatic pre-rinse function ensures reliable performance Aerosol cover prevents the release of aerosols containing infectious material Plate sensor detects whether a plate is present or not Wellwash is used to effectively remove excess liquid from wells Low residual volumes ensure optimal washing performance and reliable assay results You can find more items in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2011, Overview Bohrer R30 crate washer, built in 2011, for returnable bottle crates. The washer is currently part of a 15,000 bottles per hour bottling line. Stainless steel tunnel housing with inspection windows, access platform with stairs over the machine and its own stainless steel control cabinet. The machine is still installed and running in a mineral water plant. Technical data - Manufacturer: Bohrer - Model: R30 - Year of manufacture: 2011 - Machine type: crate washer for returnable crates - Currently installed in a 15,000 bottles/h line - Power supply: 400 V, 50 Hz - Connected load: 20 kVA - CE marked Equipment - Stainless steel tunnel housing with inspection windows - Access platform with stairs and railings - Stainless steel control cabinet with push-button operation and emergency stop Condition Used. The machine is still installed and under power at its production site and can be inspected by appointment. Availability Immediately. Gebwxtoz Eh Sgebasuh

Condition: used, Year of construction: 2019, Overview    This filling line for returnable glass was installed in 2019 and essentially consists of a bottle washer, rinser/filler and capper block and a labeling system with laser printer. The bottling line is vacant as the previous owner is closing the brewery due to retirement. The bottling process ran smoothly until the end.  The equipment is still installed and connected and can be viewed in person at any time.   Technical details  - Capacity: max. 1,500 bph (1,000 bph were actually run)  Gujboxgfr Njwxtbash - Bottled product: Beer   - Included formats: 0.33l longneck, 0.5l NRW  - Closure: Crown cap  Scope of delivery  - Bottle washer | SEN | 1989 (overhauled and installed in 2020)  - Isobaric filler block | Shandong Yuesheng | 2019   - Rinsing positions: 14   - Filling positions: 12   - Capping positions: 5   - With pre-evacuation   - Counter-pressure filler incl. 2 formats 0.33 longneck 0.5 NRW  - Dry tunnel | Shandong Yuesheng | 2019  - Labeler incl. laser printer   - Collecting table  

Condition: used, Year of construction: 2012, Overview The Krones, Gera, Joha, Markl, Miho filling line for returnable glass bottles was previously used to fill beer in a brewery in southern Germany. Technical Specifications - Output: 7,800 bph - Producs: Beer and CSD - Formats: - NRW 0.5 l - 0.33 l ring neck - 0.25 l LN Machine List  - Machine type: Decrater - Manufacturer: BMS - Year of manufacture: 2012 Guobwxtbjyb Sbueajh - Machine type: Decapper (Screw Cap) - Manufacturer: Rink - Decapping in the crate Euro 0,5l in 4x5 crate - Year of manufacture: 2012 - Machine type: Bottle washer - Manufacturer: Gera - Year of manufacture: 2024 - Machine type: Empty bottle inspector - Manufacturer: Krones - Model: Smarttronic - Incl. Pusher - Year of manufacture: 2012 - Machine type: Filler - Manufacturer: Kosme - Model: Isofill G 28/960 - 28 Valves - Year of manufacture: 2012 - With Combi Capper 4 heads(Crown Cork and Screw Cap) - Capacity: - 7,800 bph - Machine type: Labeling machine - Manufacturer: Krones - Model: Robusta - Refurbished in 2012 - 10 Bottle plates - 2 Label stations with 4 grippers and 4 glue pallets - Inkjet printer - Machine type: Crater - Manufacturer: BMS - Year of manufacture: 2012 - Crate format: Modul Crate 4x5

Condition: used, Year of construction: 2012, Overview This returnable glass bottling line consists of equipment from KRONES, KETTNER, GM GERA, RINK, SYSCONA, MATEC, FALTERBAUM, Bohrer and further supporting manufacturers. The line is designed for the processing of returnable glass bottles in crates, mainly in 0.33 L and 0.75 L formats. It includes the key process steps from crate depalletizing, crate sorting, bottle decapping, unpacking, bottle washing, empty bottle inspection, filling and screw capping to labelling, full bottle inspection, crate packing, crate inspection and palletizing. The existing crate depalletizer and palletizer are available on site; however, due to their age and outdated technology, it is recommended not to include this unit in the line acquisition. Instead, suitable modern depalletizing equipment can be offered and integrated into the line concept according to the buyer’s requirements. The line has a nominal filling capacity of approx. 18,000 bottles per hour and the premix system rated at 22,000 L/h. The line is scheduled for dismantling in February 2027. Technical Data - Line type: Returnable glass bottling line - Application: Beverage filling in returnable glass bottles - Formats: 0.33 L and 0.75 L glass bottles - Packaging: Bottles in crates - Filler capacity: 18,000 bottles/hour - Premix capacity: 22,000 L/hour - Closure type: Plastic screw caps - Labelling: Wet glue labelling, 2 aggregates - Main machine years: 1996 – 2016 - Dismantling planned: February 2027 Scope of Delivery - Crate Depalletizer | Existing unit on site; not recommended for takeover due to outdated technology. Suitable replacement equipment can be offered and integrated - Crate Sorting System | Syscona | Expert KSA | Sorting on 2 lanes: good / bad | 2014 - Crate Decapper | RINK | KM 690/4K | 2012 - Crate Unpacker | Kettner | Robot Junior RA3/C-T | 1996 - Bottle Washer | GM GERA | ARCADE GEL3 FV1-186/95-16 | 2005 Gsbwxtbjza Tx Ssasuh - Crate Washer | Bohrer | R 30 | Crate washing machine | 2011 - Empty Bottle Inspector | Krones | Linatronic | 2014 - Filler / Screw Capper | Krones | Volumetic / Modulfill | 2012 - Labelling Machine | Krones | Universella | 2012 - Closure Inspection | Syscona | Expert FHK | 2016 - Inspection System | Krones | Checkmat 731 | 2012 - Crate Packer | Kettner | 1996 - Crate Inspection | Krones | Checkmat 708 | 2011 - Palletizer | Matec | Rotomat 3B | 2002 - Falterbaum | 20000TD | Premix system; capacity 22,000 L/h | 2000