Used Battenfeld for sale (113)

Condition: used, Battenfeld plasticising cylinder Ø 18 mm, IU60 vertical- removed from Battenfeld VM75/60/60 R1040 - removed from running machine - fully functionalinlet: 18.03 mm centre: 18,01 mm outlet: 18,02 mm stroke volume: 22.9 cm³ injection pressure: 2593 bar manufacturer: Battenfeld Ihederr Efrjpfx Addjt type: Ø 18 mm, IU60 vertical spare part no.: 100WW548- removed from Battenfeld VM75/60/60 R1040 - removed from running machine - fully functionalstroke volume: 22,9 cm³ injection pressure: 2593 bar manufacturer: Battenfeld type: Ø 18 mm, IU60 vertical spare part no.: 100WW548 Dition: gebraucht

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Hersteller: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Ihsdpfjwl Rucsx Addst Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg

Year of construction: 2001, condition: ready for operation (used), Two Battenfeld injection molding machines are available. 1) Battenfeld BA 1600, year of construction: 2001, clamping force: 1600kN, tie bar distance: 520mm/520mm, installation height min./max.: 225mm/550mm, opening stroke: 480mm, centering diameter: 160mm, screw diameter: 50mm, injection weight: 520g. 2) Battenfeld BA 500/200 CDK, year of construction: 1995, clamping force: 500kN, tie bar distance: 320mm/320mm, platen dimensions X/Y: 490mm/490mm, installation height min./max.: 150mm/350mm, opening stroke: 250mm, max. platen distance: 600mm, screw diameter: 35mm, injection volume: 134.7cm³, injection weight: 122.5g, injection pressure: 1484bar. Machine dimensions X/Y/Z: approx. 3800mm/1350mm/1800mm, weight: approx. 3200kg. The machine has cylinder problems with the screw and the forward/backward unit. Documentation available. On-site inspection is possible. Individual sale possible. Ijdpowydg Uofx Addeht

Condition: excellent (used), Year of construction: 2003, Battenfeld HM1300/350 Year of manufacture: 2003 Clamping force: 130 t Ihedjxwmx Sjpfx Addot Screw diameter: 40 mm Operating hours: 77,890 h Tie bar spacing: 42x42 cm

Condition: ready for operation (used), Year of construction: 2001, Ø 710-1000mm range PVC pipe production line. Ihodpfovzqy Sox Addet

Condition: excellent (used), Year of construction: 2010, Clamping force: 110 t Tie bar distance: 470x420 mm Min Mould height: 275 mm Max Mould height: 775 mm Platen size : 680x663mm Screw diameter: 22 mm Shot volume: 41 cm3 Ijdou Ekaqepfx Addjht Opening force: 55 kN Opening path: 500 mm Correct injection pressure: 2864 bar Nozzle pressure: 47 kN Path of the pant : 250 mm Forward ejector force: 41,2 kN Reverse: 26,4 kN Max. mold weight : 1000 kg min. tool diameter: 315 mm Working hours: 70.000 h Type: Horizontal Drive: Hydraulic Unilog B6 controll Air Valve Core puller Euromap 67

Condition: refurbished (used), Year of construction: 2009, ø 450-1200 mm PE/PP Central clamping Ijdpjw H Iyfofx Addoht

Condition: excellent (used), Year of construction: 2005, Battenfeld HM 3500 /1900 Injection Moulding Machine Year: 2005 Ihodpfew Dcxdex Addet Clamping Unit: Clamping force: 3,500 kN Platen dimensions (H x V): 1,100 mm x 1,060 mm Tie bar distance (H x V): 800 mm x 710 mm Mould opening stroke: 670 mm Minimum mould height: 375 mm Maximum mould height: 710 mm Daylight: 1,380 mm Ejector stroke: 250 mm Ejector force: 81 kN Injection Unit: Screw diameter: 55 mm L/D: 22 Injection pressure: 2,481 bar Screw stroke: 325 mm Shot volume: 772 cm³ Injection weight (PS): 710 g Injection speed: cm³/s Screw speed: 294 rpm Max. plasticising rate: 68 g/s Number of heating zones: 1 + 5 Electrical & Hydraulic Equipment: Installed heating power: 45 kW Pump capacity: 26.6 kW Tank volume: 660 l Machine Dimensions & Weight: Approx. dimensions: 7.53 m x 1.79 m x 2.31 m Total machine weight: 15,200 kg

Year of construction: 2007, condition: ready for operation (used), Clamping force: 1000kN, tie bar spacing: 470mm/420mm, platen dimensions X/Y/Z: 680mm/590mm, opening stroke: 500mm, daylight: 750mm, ejector stroke: 150mm, ejector force: 41.2kN. Screw diameter: 40mm, L/D ratio: 22, injection volume: 251cm³, injection weight: approx. 228g, injection pressure: 2100bar, injection stroke: 200mm. Machine dimensions X/Y/Z: approx. 4300mm/1500mm/2000mm, weight: approx. 4600kg. Documentation available. An on-site inspection is possible. Isdpfx Aow Duvbsddeht

Condition: excellent (used), Year of construction: 2003, Battenfeld 1300/350 Year of manufacture: 2003 Clamping force: 130 t Ijdpfx Adsxvihmsdjht Screw diameter: 40 mm Operating hours: 77,890 h Tie bar distance: 42 x 42 cm

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 1785-6201, Single-screw extruder Ihodpfxsu Itqdj Addot

Year of construction: 2001, operating hours: 64,499 h, condition: good (used), Conical screws, approx. 110 kg/h. A.C. motor 30.0 kW. New motor, 64,499 operating hours. Iedpfx Aew Hy Uueddjht

Year of construction: 2006, condition: excellent (used), Battenfeld HM 100/525 injection molding machine Year: 2006 Controls: Unilog B4 Technical details Short-circuit force: 1000 kN Size of mold plates (hxv): 680mm x 594mm Distance between columns : 470mm x 420mm Mold opening stroke: 500mm Mold height min: 250mm Maximum clearance : 750 mm Iodek Rnvmepfx Addeht Hydraulic ejector - stroke: 150 mm Forward/reverse ejector force: 41.2 kN Injection unit Screw diameter: 40 mm Ls/D ratio: 22 Injection pressure: 2100 bar Injection volume: 251 cm³ Injection weight , PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1/min Max plasticization rate: 30.4 g/sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating power: 12.1 kW Adjustable barrel heating zones: 1+3 Pump power 18.5 kW Oil capacity 275 liters Dimensions and weights Total weight of the machine: 4,600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m

Condition: excellent (used), Year of construction: 2002, Battenfeld TM 4500/4500 B4 Year of manufacture: 2002 Clamping force: 450 tons Screw diameter: 85 mm Injection weight: 1870 g Tie bar distance: 80x80 cm Isdpfx Ajxvihaoddeht

Condition: excellent (used), Year of construction: 2015, WITTMANN BATTENFELD TM 400/3400 injection molding machine Control -UNILOG B6P Year of production – 2015 Ihjdpfx Adowqd Tcedet NUMBER OF HOURS WORKED 33756 ServoPower SO package: Servo drive with variable speed for hydraulic pump to increase energy efficiency and shorten cycle times according to EUROMAP 60 Cycle II and Cycle III _____ Technical data of injection unit: • Screw diameter: 85 mm • L/D ratio (length to diameter): 22 • Specific injection pressure: 1574 bar • Injection volume (calculated): 2128 cm³ • Max. injection weight (PS): 1936.4 g _____ Technical data of closing unit: • Closing force: 4000 kN • Free space between columns: 710 × 710 mm (W × H) • Min. mold height: 300 mm • Max. plate spacing: 1380 mm • Opening stroke: 670 mm

Condition: excellent (used), Year of construction: 2002, Battenfeld 4500/4500.B4 Year: 2002 Clamping force: 450 tons Screw diameter: 80 mm Injection weight: 2150 g Ihedpfx Asxvig Ajddot Tie bar spacing: 80x80 cm

Condition: excellent (used), Year of construction: 2011, Wittmann Battenfeld EcoPower 110/130 injection molding machine Electric machine, energy efficient Control :UNILOG B6 Year of production : 2011 Closing force 110 tons Auger diameter 25 mm Injection weight max. 55.8 gPS Column spacing 470x470 mm Min. tool height 200 mm Max. tool height 450 mm Hydraulic working pressure 210 bar Machine weight 4600 kg Ijdpjrn I Nrofx Addsht L. 420 x width 140 x height 270 cm, Battenfeld has about 60000 hours (in the machine the computer was changed and the hours were not recorded there, now it has less hours 4944)

Condition: excellent (used), Year of construction: 2004, Battenfeld HM 2700 / 1330 injection molding machine Year of production - 2004 Control - Unilog B4 Closing system : Closing force : 2.700 kN Mold platen size (h x v): 1030 mm x 1020 mm Distance between columns (h x v): 710 mm x 630 mm Mould opening stroke: 800 mm Min. mold height: 350 mm Maximum mold height: --- mm Max. daylight: 1150 mm Hydraulic ejector - stroke: 200 mm Ejector force forward/backward: 59 kN Injection system : Screw diameter: 55 mm Ls/D ratio: 22 Injection pressure: 2041 bar Sweep volume: 653 ccm Injection weight, PS: 594 g Injection stroke: 400 mm Screw speed: 318 1/min Maximum plasticization rate: 59.3 g/sec. Nozzle pressure: 100 kN Electrical and hydraulic equipment Isdpfxevt Ruts Addoht Installed heating power: 18.2 kW Adjustable drum heating zones: 1+4 Oil tank capacity - 650 l Dimensions and weight Total machine weight: 12,000 kg Dimensions (L x W x H) 5.6 x 1.8 x 2.2 m

Condition: excellent (used), Year of construction: 2005, Battenfeld TM 4500/1900 injection molding machine Year of production 2005 Iodpfewrihzjx Addoht Unilog B4 control Closing system: Closing force 4500 kN Minimum mold height 425mm Maximum mold height 770mm Column spacing 800 x 800 mm Mounting plate dimensions 1155 x 1195mm Mould opening stroke 760mm Injection unit Screw diameter 65mm Injection weight (ps) 930g Injection volume 1078 cm3 Specific injection pressure 1776bar Robot interface Euromap 12 Machine dimensions: 8.3 x 1.9 x 2.4 Weight: 20400 kg Oil tank capacity: 800 liters

Condition: excellent (used), Year of construction: 2015, Battenfeld TM 180/525 injection molding machine Ihedpfxswrmkme Addet Year of production: 2015 Operating hours: 44753 Control: B6P Closing unit: Closing force [kN]: 1800 Clamping plate dimensions (hxv) [mm]: 1020 x 1030 Clearance between columns (hxv) [mm]: 520 x 520 Min./max. mold height [mm]: 225…550 Maximum opening width [mm]: 1200 Centring ring diameter [mm]: 160 Maximum ejector stroke [mm]: 180 Injection unit: Screw diameter [mm]: 40 Injection volume [cm3]: 288 PS injection weight [g]: 251 Injection pressure [bar]: 2100 Maximum injection speed [mm/s]: 125 Additional equipment: Pneumatic valve - 3 pcs. Core - 1 pc.

Condition: excellent (used), Year of construction: 2008, Injection molding machine BATTENFELD HM 60/350 S Year of manufacture: 2008 Injection elements: Screw diameter: 35 mm Injection weight : 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Closure elements: Iedpfjk Rnq Nox Addjht Closing force : 60 t Clearance between columns: 370x320 mm Dimensions of table plates max: 550x530 mm Ejector: hydraulic Closing system: hydraulic Control: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Condition: excellent (used), Year of construction: 2010, Battenfeld HM 110/350 injection molding machine Year of production: 2010 Control: Unilog B6 Number of working hours - 35 0000 Injection unit: Screw diameter: 35 mm Injection pressure: 2083 bar Injection volume: 169 ccm Injection capacity: 153 g Closing unit: Closing force: 1100 kN Distance between columns: 470 x 420 mm Min mold height: 275 mm Opening: 500 mm Isdpswq D Nqofx Addsht Max mold height: 775 mm Ejector stroke: 150 mm General information: Machine dimensions (m) LxWxH: 4.0 x 1.5 x 2.1 m Weight: 4.500 kg Specification: 1. Plasticizing system with a diameter of Ø35mm. 2. (06.X17) Europakiet UNILOG B6 consisting of: - 07.D00 adjustment elements, - 02.K02 air valve controlled in time function - 01.C01 hydraulic control of the NW 6 core on the closing plate - 06.B21 robot connection according to EUROMAP 67 - 06.R02 2 Schuko 16A sockets mounted on the side wall of the control cabinet - 06.R20 2 CEE 16A sockets mounted on the side wall of the control cabinet 3. 06X06 UNILOG B6S package consisting of - extended functions of the control system with programs - APS system - cycle time analysis - user pages - visualization of graphic functions of actual values in the form of 16 curves - 4 surrounding curves - Alarm and logging protocol extended to 10,000 events - Quality Table function extended to 10,000 last cycles - additional USB ports for network connections - keyboard with foil buttons - Statistical Injection Process Control SPC function - injection speed, plasticization and hold-down pressure regulated by servo valve 4 machines in perfect condition are available.

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 injection molding machine Control: B6S Year of manufacture: 2011 Operating hours: 68038 Closing unit: Closing force [kN]: 3000 Iodpfx Adswrmqmodsht Clamping plate dimensions (hxv) [mm]: 1020 x 1030 Clearance between columns (hxv) [mm]: 710 x 610 Min./max. mold height [mm]: 375 Maximum opening width [mm]: 1150 Centring ring diameter [mm]: 160 Maximum ejector stroke [mm]: 200 Injection unit: Screw diameter [mm]: 55 Injection volume [cm3]: 653 PS injection weight [g]: 600 Injection pressure [bar]: 2040 Maximum injection speed: 144 Additional equipment: Pneumatic valve - 4 pcs. Core - 2 pcs.

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Servo-hydraulic injection moulding machine Clamping force: 9,000 kN (900 tons) 🔹 General Information: Year of manufacture: 2017 Control system: UNILOG B8 Installed power: 53.9 kW Operating hours: only 999 Dry cycle time: 4.0 – 770 sec/mm Machine dimensions (L x W x H): 10,100 × 3,400 × 2,700 mm Machine weight: 35,200 kg 🔹 Injection Unit: Screw diameter: 105 mm Injection volume: 4,545 cm³ Screw rotation speed: 159 rpm Screw L/D ratio: 22 Nozzle stroke / max force: 129 mm / 950 kN Max nozzle travel: 525 mm Number of heating zones: 7 🔹 Clamping Unit: Clamping force: 9,000 kN Max mould opening stroke: 1,800 mm Min / max mould height: 600 mm / 1,200 mm Max daylight (between platens): 2,400 mm Tie bar spacing (H × V): 1,450 × 1,100 mm Ejector stroke / force: 300 mm / 165 kN Mould opening force: 300 kN Iedpjwzy N Uofx Addoht Core pulls: 2

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 57212, clamping force: 4,500 kN, screw diameter: 75 mm, injection pressure: 1,739 bar, mold height (min.): 425 mm, plate width: 1,155 mm, plate height: 1,195 mm, TECHNICAL DETAILS Clamping force: 4,500 kN Minimum mold height: 425 mm Maximum mold height: 770 mm Tie bar spacing: 800 x 800 mm Mounting plate dimensions: 1,155 x 1,195 mm Mold opening stroke: 760 mm Injection unit Screw diameter: 75 mm Injection weight (PS): 1,506 g Injection volume: 1,657 cm³ Specific injection pressure: 1,739 bar Ijdowp Iqiopfx Addsht MACHINE DETAILS Control: Unilog B4 Machine dimensions: 8.3 x 1.9 x 2.4 m Weight: 20,400 kg Robot interface: Euromap 12 Oil tank capacity: 800 liters Hydraulic pressure: 210 bar Rated current motor: 99 A