Beer tank buy used

Sort by
Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
11

Fermentation tank VA stainless steel tank tank beer 4800L

Delmenhorst, GermanyGermany
6428 km
ready for operation (used)
Request priceCall
Used stainless steel tank with cooling jacket Article 10224 Slight bumps in the transition of cylinder bases Container is tight! Last purpose: brewery Volume: CA. 4800L Type: Standing on feet Material (media contact): 1.4301 / AISI304 Design: Single-walled with cooling jacket Floors: Torispherical head Working pressure according to the nameplate: ATM Dimensions tank: Container diameter: 1700 mm Cyl. Height: 1500mm Total height: 2550 mm Height of feet: 600mm Distance from ... more
5

Beer tank 181 T

DK-Thisted, DenmarkDenmark dealership location
6263 km
used
Request priceCall
2qhqla A-3570-Beer Tank 181T Stainless steel vertical tank for beer. Equipped with jacket! Conical bottom. AISI304, Capacity 181.000 L Dia. Ø 4200 mm H 15.400 mm more
5

Vertical Turret Lathe - Double Column STANKO 1525

Mönchengladbach, GermanyGermany dealership location
6371 km
used
Request priceCall
faceplate diameter:2240 mm swing diameter:2500 mm turning height:1600 mm slides vertical travel:1200 mm workpiece weight:16 t C2ljnkm88 horizontal adjustment:1390 mm angle adjustable from - to:+ - 30 Grad faceplate turning speed range:1,6 - 80 U/min main drive motor:65 kW total power requirement:70 kW weight of the machine ca.:36 t dimensions of the machine ca.:5,4 x 5,1 x 5,0 m In 2008 complete overhauled with new electric with two vertical RAM´s 4-axes digital readout HEIDENHAIN 2 gear ste... more
6

Thread Milling- and Hobbing Machine STANKO-KOLOMNA 5 B 370 x 3000

Monheim, GermanyGermany dealership location
6405 km
used
Request priceCall
max. workpiece diameter 500 mm threading length 3000 mm max. module 20 / 25 min. module - max. wheel diameter 500 mm min. wheel diameter 50 mm hobbing length 2800 mm number of teeth 6 - 200 milling cutter diameter 250 mm cutter length max. 300 mm milling head speed 10 - 103 U/min feeds axial 0,2 - 575 mm/min radial feed 0,36 - 7,1 mm/rev main gear-box motor 18,5 kW max. angle of teeth +/- 45 Grad workpiece weight 4000 kg Distance between centres 3200 mm center height over square guideway 450 ... more
4

4 kW piston compressor with tank & dryer RENNER RIKO 700/270 ST-KT

2.490  €
Fixed price not including VAT
Submit request
Erlangen, GermanyGermany
6736 km
2018
as good as new (ex-display)
2.490  €
Fixed price not including VAT
Submit request
Call
Exhibition machine: Piston Compressor immediately available (Plug and Play): RENNER RIKO 700/270 ST-KT - 10 bar with integrated dryer and galvanized 270 liter container Bqu9tasi The compressor has 2 operating hours and is available immediately. 2 steps 2 cylinders Pressure: 10 bar Rated power: 4.0 kW Delivery quantity: 570 l / min Sound level: 78 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 970 x 795 x 1880 mm Weight: 240 kg more
3

heavy duty lathe STANKO import Moskau 16K25

Mögglingen, GermanyGermany
6710 km
1981
ready for operation (used)
Request priceCall
Swing diameter over bed 500 mm Distance between center 900 mm multifix Bcbxqfo0nl 6x tool holder 3-jaw chuck D 250 mm 2x steady rest tailstock more
6

Center Lathe STANKO 165

Bünde, GermanyGermany dealership location
6460 km
1974
used
Request priceCall
turning diameter over bed 1100 mm turning diameter over slide rest 600 mm turning length 5000 mm centre height 500 mm spindle bore 80 mm spindle turning speed range 24 / 5 - 500 U/min longitudinal feeds: 0,20 - 3,05 mm/U face feeds 0,07 - 1,04 mm/U tailstock taper ISO 50 workpiece weight max. 5 t total power requirement 22 kW weight of the machine ca. 15,7 t dimensions of the machine ca. 8,2 x 2 x 1,76 m Condition: ready for operation Electric 400 Volt 3 jaw chuck Forkardt F 500 Multifix... more
10

lathes manual Mostana Stanko 165 Heavy Duty Lathe 1000 x 2800mm

Dundee, United KingdomUnited Kingdom dealership location
5598 km
ready for operation (used)
Request priceCall
Code: ST2624 Mostana Stanko 165 Heavy Duty Lathe 1000 x 2500mm Ggbsptkr more


beer tank
daily

New machines via email!

Stay updated!
6

Heavy Duty Lathe STANKO-RYAZAN RT 950 F3 x 6000

Monheim, GermanyGermany dealership location
6405 km
2007
used
Request priceCall
turning diameter over bed 1880 mm turning diameter over slide rest 1500 mm turning length 6000 mm spindle turning speed range 1 - 250 U/min turning tool - shaft cross cut 40x50 mm longitudinal adjustment 6000 mm cross adjustment 810 mm rapid traverse longitudinal 4000 mm/min rapid traverse cross 2000 mm/min controlled axis 2 main drive motor 80 - 130 kW bed width 1350 mm threading metric 1 - 120 mm/Stg. threading WHITWORTH 28 - 0,25 TPI thread - module 0,5 - 30 module Control Sinumerik 802D wo... more
1

Stainless steel pressure tank STAWAG 30 L

Wehr, GermanyGermany
6632 km
1988
good (used)
Request priceCall
Second-hand stainless steel pressure STAWAG container 30 L (brewing keg) Year of manufacture: 1988 Producer: STAWAG Useful volume: 30 L St938wtsw Total Ø: 400 x 370 mm Test pressure: 4,5 bar Operating pressure: 3 bar Operating temperature: 130 °C more
5

Vertical Turret Lathe - Double Column STANKO 1550

Mönchengladbach, GermanyGermany dealership location
6371 km
used
Request priceCall
faceplate diameter:4500 mm swing diameter:4870 mm turning height:2300 mm slide stroke:1300 mm ram head dimension:300 x 300 8-edge mm Bblqubzdub faceplate turning speed range:1 -25 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Modernisation with CNC SIEMENS 840 D in 2012 Tool Basic holder KM 80 In process camera screen coolant attachment and chip conveyor more
3

Plano milling machine Stanko 6662 Stanko 6662

43.000  €
Fixed price not including VAT
Submit request
Scotland, United KingdomUnited Kingdom
5569 km
1968
excellent (used)
43.000  €
Fixed price not including VAT
Submit request
Call
Table working surface: 1800 x 6000 mm Longitudinal table travel: 6500 mm Machine dimensions: 14750 x 6020 x 5440mm Dydd8b39 Max workpiece weight: 40000 kg Machine weight: 76700 kg price 43000 EUR more
5

Slotting Machine - Vertical STANKO 7 A 420

Bünde, GermanyGermany dealership location
6460 km
1976
used
Request priceCall
max. ram stroke 200 mm throat 480 mm table diameter 500 mm ram stroke 20 - 200 mm table movements: X = 500 / Y = 400 / 360° tool cross-section 20 x 30 mm ram adjustment 264 mm stroke speeds 40/64/102/163 m/min table feeds longitudinal and cross 0,1 - 1,2 table rotation speed 0,066 - 0,799 U/min rapid traverse longitudinal and cross 1,8 m/min Fswycocc8 rapid power traverse circular 3,4 U/min total power requirement 4,1 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,3 x 1,27 x... more
6

Vertical Turret Lathe Fremtas/Stanko/Sedin 32FR1

Overath, GermanyGermany dealership location
6430 km
2018
as good as new (ex-display)
Request priceCall
Machine like new! Geometry appliance DIN8609 Warranty 12 months for all damage control: conventional / PLC Siemens faceplate control 4-axis digital display Fa.ACU-RITE(Heidenhain) Lxvsl complete electrical equipment 230/400V,50Hz,deutsches make, CE standard Technical data: Maximum workpiece dimensions:-diameter 3200 mm -Height 1600 mm Maximum workpiece weight kg 16000 Face plates diameter 2800 mm Max stroke length - horizontal mm 1720 -vertical mm 1200 Number of steps of f... more
3

LIPP GMBH CONDENSATE TANK

MA Barneveld, NetherlandsNetherlands dealership location
6274 km
ready for operation (used)
Request priceCall
Bdk0btns more
5

Gear Shaping Machine STANKO 5 M 150 P

Monheim, GermanyGermany dealership location
6405 km
1988
used
Request priceCall
max. wheel diameter 800 mm gear width 170 mm max. module 12 min. module 1 max. number of teeth 400 min. number of teeth 10 max. angle of teeth 23 mm Xtixnyw max. ram stroke 200 mm dia. of shaper cutter 200 mm dividing plate diameter 672 mm taper Morse Nr. 5 faceplate diameter 800 mm Length movement of the table 700 mm double strokes/min. 33 - 188 Stück electrics - voltage/frequency 380 / 50 V/Hz workpiece height max. 300 mm total power requirement 15 kW weight of the machine ca. 10,5 t dim... more
1

Plano milling machine Stanko 6625T Stanko 6625T

65.000  €
Fixed price not including VAT
Submit request
Scotland, United KingdomUnited Kingdom
5569 km
1985
excellent (used)
65.000  €
Fixed price not including VAT
Submit request
Call
Plano milling machine Stanko 6625T (Two vertical+two horizontal spindles) YOM: 1985 Table working area: 2 500 x 8 000 mm Max.height of workpiece: 2 500 mm Bcvwgajuun Max.weight of workpiece: 65 000 kg Table travel: 8 500 mm Distance between columns: 3060 mm Spindle speeds: 20-1000 rpm Main motor power: 30 kW Machine dimensions: 22 460 x 8 830 x 6 700 mm Machine weight: 146 000 kg price 65000 EUR more
6

Forestry machine Onbekend Vanhove 6000 Liter Diesel Fuel Tank - DPX-99031

2.500  €
Fixed price not including VAT
Submit request
Oudenbosch (Moerdijk Area), NetherlandsNetherlands dealership location
6229 km
2000
used
2.500  €
Fixed price not including VAT
Submit request
Call
Cargo space capacity: 6.000 l Field of application: Construction EPA marked Transport dimensions (LxWxH): 3.2x1.6x2 Bccak90vpa more
4

Radial Drilling Machine STANKOIMPORT 7M57

Nuernberg, GermanyGermany dealership location
6749 km
1972
used
Request priceCall
bore capacity in steel (diameter) 80 mm arm length ca. 2000 mm workpiece height max. 1300 mm feed 0,025 - 1,25 mm/U revolutions per minute 14 - 1800 U/min tool adaptor MK 6 table-size ca . 2000 x 1500 mm distance work spindle /surface of the table ca. - 1700 mm total power requirement 10 - 12 kW weight of the machine ca. 14,00 t dimensions of the machine ca. 3,5 x 1,6 x 3,7 m Bccseqruwx radial drill more
1

Center Lathe STANKOMASHSTROJ 16K25B

Ennepetal, GermanyGermany dealership location
6422 km
2017
used
Request priceCall
turning diameter over bed 0500 mm turning diameter over slide rest 300 mm turning length 1000 mm spindle turning speed range 9-1600 U/min longitudinal feeds: 0,063- 2,52 mm/U cross feeds: 0,027- 1,07 mm/U metric thread 0,5-224 spindle passage 82 mm throat 710 x 240 mm 9rgrn33kq total power requirement 9 kW weight of the machine ca. 3 t dimensions of the machine ca. 2,6 x 1 x 1,6 m DEMONSTRATION MACHINE ! Machine comes with chuck cover (CE conform), cover at toolholder (CE conform), Multifi... more
11

Nitrogen tank for PU-glue basin Unbekannt Unbekannt

1.550  €
Fixed price not including VAT
Submit request
Langenfeld (Rheinland), GermanyGermany
6405 km
good condition (used)
1.550  €
Fixed price not including VAT
Submit request
Call
Storage container for PU glue basin on edge banding machines Stable and heavier steel container with coating, professional processing The glue tank is inserted into the container, lid is screwed, then is the container with nitrogen "flooded", so that the PU glue against air moisture is protected and can be stored for longer. Manufacturer is unfortunately unknown, but in operation an edgebander by BIESSE in use. Internal dimensions approx. 439 x 250 x 438/328 mm (Lxwxh), see drawing ... more

manual, spareparts list Stankoimport 2620 2M55 3G71M

Borken-Burlo, GermanyGermany dealership location
6360 km
used
Request priceCall
Cagxtzfr more
5

Other machining Stanko 7A420 M

Babberich, NetherlandsNetherlands dealership location
6320 km
1970
ready for operation (used)
Request priceCall
G8ys0yons more
5

Stanko Frasmaschine Stanko

KL, NetherlandsNetherlands
6329 km
1960
good (used)
Request priceCall
2razhm more
5

Center Lathe STANKO 16 K 20

Bünde, GermanyGermany dealership location
6460 km
1983
used
Request priceCall
turning diameter over bed 430 mm turning diameter over slide rest 220 mm turning length 710 mm centre height 220 mm spindle bore 52 mm spindle turning speed range 12,5 - 1600 U/min total power requirement 10 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 2,50 x 1,19 x 1,5 m Condition: ready for operation Electric 380 Volt Cooling equipment Machinelight 3 jaw chuck 310 mm carriage-rapid traverse Rapid transfer steel-holder Applicatiopns for rapid transfer steel-hol... more
6

Gear Hobbing Machine - Horizontal STANKO-KOLOMNA 5 B 371

Monheim, GermanyGermany dealership location
6403 km
1970
used
Request priceCall
max. wheel diameter 500 mm gear width 3.000 mm max. module 10 min. wheel diameter 50 mm hobbing length 2.500 mm workpiece length - max. 3.000 mm [...] angle 45 ° workpiece weight 4000 kg faceplate diameter 560 mm height of centering tips over bed 450 mm number of teeth 25-250 hob dia. - max. 250 mm hob length - max. 300 mm axis distance between cutter and workpiece - min. 60 mm axis distance between cutter and workpiece - max. 385 mm weight of the machine ca. 28 t dimensions of the machine ca.... more
14

Machine accessories Stanko 7A430

Babberich, NetherlandsNetherlands dealership location
6320 km
1980
ready for operation (used)
Request priceCall
DIMENSIONS Length 2600 mm Width 2200 mm Bszq9t8o Height 3000 mm more
5

Gear Shaping Machine STANKO 5 M 150 P

Monheim, GermanyGermany dealership location
6405 km
1989
used
Request priceCall
max. wheel diameter 800 mm gear width 170 mm Zbddj8kre max. module 12 min. module 1 max. number of teeth 400 min. number of teeth 10 max. angle of teeth 23 mm max. ram stroke 200 mm dia. of shaper cutter 200 mm dividing plate diameter 672 mm taper Morse Nr. 5 faceplate diameter 800 mm Length movement of the table 700 mm double strokes/min. 33 - 188 Stück electrics - voltage/frequency 380 / 50 V/Hz workpiece height max. 300 mm table bore diameter 120 mm total power requirement 15 kW weight ... more
6

Tokheim Tankstellen Kassensystem für 16 Zapfsäulen ausgelegt, Währungsanzeige in DM

380  Eur
Fixed price not including VAT
Submit request
Remscheid, GermanyGermany dealership location
6420 km
ready for operation (used)
380  Eur
Fixed price not including VAT
Submit request
Call
Tokheim designed petrol stations POS system for 16 dispensers, currency display in DM, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Bckgeefsbn more
4

Horizontal forging machine (Upsetter) STANKO RYAZAN B1139A, 800T

85.000  €
Starting price not including VAT
Submit request
London, United KingdomUnited Kingdom dealership location
5926 km
1984
good condition (used)
85.000  €
Starting price not including VAT
Submit request
Call
Capacity, ton 800 Movable die stroke, mm 180 Py83ddo Max. upsetting ram stroke, mm 380 Upsetting ram workstore, mm 250 Upsetting ram return stroke with closed dies, mm 130 Distance bentween upsetting ram and dies stroke forward, mm 140 Number of ram strokes per minute 35 Die dimensions, mm 590 x 220 x 660 Electric motor power, kW 40 Dimensions: mm 6300 x 3900 x 2850 Weight: kg app. 80800 more
4

CNC Lathe STANKOMASHSTROJ ST16A25

Ennepetal, GermanyGermany dealership location
6422 km
2017
used
Request priceCall
turning diameter 0500 mm turning length 1000 mm control Fanuc 0i turning diameter over slide rest 280 mm spindle turning speed range 21- 1620 U/min longitudinal feeds: 0-1000 mm/min cross feeds: 0-1000 mm/min 9rgrelwwp spindle passage 77 mm total power requirement 10 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 2,5 x 1,37 x 1,69 m NEW MACHINE as a flat bed machine ! Machine with housing (CE conform), 6 position turret and three jaw [...] Fanuc 0i more
15

Lathes Stanko Russia 16 K 40

Babberich, NetherlandsNetherlands dealership location
6320 km
2003
ready for operation (used)
Request priceCall
Technical data Nec7p Turning diameter over bed Ø830 mm Diameter of Bettschlitten480 mm Drehlänge4000 mm Werkstückgewicht4000 kg Spindelbohrung110 mm Speed range / stufen1250 RPM more
6

Heavy Duty Lathe STANKOIMPORT MOSKAU 1M635

Velen-Ramsdorf, GermanyGermany dealership location
6370 km
used
Request priceCall
turning diameter over bed 700 mm turning diameter over slide rest 360 mm turning length 3000 mm spindle bore 72 mm spindle speed: 10 - 1250 U/min tailstock quill taper MT MK 5 quill adjustment 300 mm total power requirement kW weight of the machine ca. 5,8 t Ciqzsjd dimensions of the machine ca. 5,3 x 1,7 x 1,8 m with digtal read out system in y+x axis more
2
 Start Chat

Tischbohrwerk Stanko IMPORT 2620 E

9.000  €
Fixed price not including VAT
Submit request
Leingarten , GermanyGermany
6639 km
1971
ready for operation (used)
9.000  €
Fixed price not including VAT
Submit request
Call
Engine type: Tischbohrwerk Make: STANKO IMPORT Type: 2620 E Year of construction: 1971 Control type: conventional Country of origin: Russia Bctsgochaj Shipping time: immediately Technical details Spindle diameter: 90 mm x stroke: 1000 mm y travel: longitudinal: 710 mm Spindle retainer: MK 5 Speed: 12,5...1600/23step RPM Feed range headstock: 1, 4... 1110 mm / min Table swivel: 360 ° Table size: 1250 x 1120 mm Table load: 3000 kg Table feed lengthwise and crosswise: 1, 4... 11... more
2

Vertical Turret Lathe - Double Column STANKOIMPORT KU473 (1563)

Ennepetal, GermanyGermany dealership location
6422 km
1990
used
Request priceCall
faceplate diameter 6000 mm swing diameter 6300 mm turning height 3200 mm faceplate speeds from - to 0,25-25,5 U/min bore depth 2000 mm feeds 0-1000 mm/min rapid traverse 2,5 m/min adjustment of cross-rail 300 mm/min total power requirement 180 kW Bjgrqc3y weight of the machine ca. 220 t dimensions of the machine ca. 14,2 x 8,2 x 9,8 m Machine has two vertical tool heads and hydrostatic table support. more
14

Clamping plates with T-slots STANKO K3TC

Babberich, NetherlandsNetherlands dealership location
6320 km
ready for operation (used)
Request priceCall
Technical data Länge5500 mm Breite2100 mm Höhe400 mm T NutengrößeT36 Lot T-Nuten8 Distance from T-slots / Sprung250 mm Weight per plate ca. 9.8 ton Amount / number Platten7 DI... more
6

Enamelled mixing tank De Dietrich & Cle Niederbronn unbekannt

Leipzig, GermanyGermany dealership location
6734 km
used
Request priceCall
Make: De Dietrich and Cle NiederbronnYear of manufacture: 1979capacity: 5430l 7nnsgpxmu more
4

Radial Drilling Machine STANKOIMPORT 2H57

5.900  €
Fixed price not including VAT
Submit request
Hemer, GermanyGermany dealership location
6448 km
1970
used
5.900  €
Fixed price not including VAT
Submit request
Call
bore capacity in steel (diameter):90 mm Ucizumody arm length:2500 mm workpiece height max.:1600 mm tool taper:6 MK weight of the machine ca.:9,5 t dimensions of the machine ca.:3,6 x 1,55 x 3,6 m more
3
 Start Chat

Vetical lathe STANKO 1516

ČeskoCzech Republic
7010 km
1979
good (used)
Request priceCall
Gvg0ac Max turning diameter: 1600 mm Table diameter: 1400 mm Maximum workpiece height: 1000 mm Max. Workpiece weight at platen speed: 4-125 rpm- 1: 6000 kg / 150-200 rpm- 1: 2400 kg Speed range: 4-200 ot.min-1 Engine power: 40 kW Machine dimensions: 3030 x 3170 x 4100 mm Machine weight: 20000 kg more
5

Vertical Turret Lathe - Single Column STANKOIMPORT 1512

Ennepetal, GermanyGermany dealership location
6422 km
1987
used
Request priceCall
faceplate diameter 1120 mm swing diameter 1250 mm turning height 1000 mm workpiece weight 4000 kg faceplate speeds from - to 1,25-315 U/min cross travel of ram-slide 775 mm vertical head swivelling 45 Grad ram stroke - vertical 700 mm feeds 5,45 - 2000 mm/min total power requirement 30 kW Gvjxls weight of the machine ca. 18 t dimensions of the machine ca. 2,7 x 2,9 x 4,1 m Machine is in a very good condition. Machine will be delivered with DRO. Main drive of the machine was renewed in 2006.... more


beer tank
daily

New machines via email!

Stay updated!
Save search query

to

to

Edit search
BEER TANK
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Find out more
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
Listing on Machineseeker
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close