Bright beer tank

Chema Verfahrenstechnik GmbH

Condition: new, Best price 4499 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield. Bcjdpfsdnxydox Abdsw

Condition: used, Year of construction: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-Maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained and ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and a reinforced cutting frame. — Specification / Scope of Delivery • 1 set of armoured shafts HW 8/10 with clearing combs and breaker bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with clearing combs and breaker bar, also for scrap and waste • DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Bjdpfsx Nkhqsx Abdscw Operating hours: 7,230 Engine power: approx. 566 kW (approx. 770 HP) Emissions standard: Stage V / Tier 4f (depending on version) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Chassis: crawler tracks, hydraulically driven Application areas: scrap, commercial waste, bulky waste, mixed waste, wood, recycling material — Condition: Well-maintained machine Fully operational Sale as inspected on site Additional Information / Maintenance History The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work was carried out professionally in accordance with the manufacturer’s specifications and documented. Notes: • Sale is without any warranty or guarantee. • No return or renegotiation. • Subject to prior sale. All information provided is without obligation. The seller accepts no liability for possible errors, omissions, or changes in the details. Sale is exclusively subject to prior sale.

Condition: used, Year of construction: 2011, operating hours: 4,950 h, functionality: limited functionality, machine/vehicle number: 80, rotational speed (min.): 16 rpm, power: 261 kW (354.86 HP), We purchased the machine new in 2011. Since the end of 2020, we have had a new unit and have barely, if at all, used the VZ 750 D since then. The machine is still operational and can be demonstrated. The combs are new, and the belts are in good condition. The engine (CAT C9) runs and delivers power; it smokes under full load, as there is no exhaust aftertreatment system installed. The Arjes can be inspected by appointment. Please submit your questions in German; we will respond promptly. Sale is exclusively to commercial businesses with headquarters in the EU. Bcsdpfx Asx Tp T Tobdjw

Condition: new, Year of construction: 2026, This lathe can be used for many tasks such as internal and external surfaces turning, tapers turning, buffing, modular and DP threading, drilling and internal broaching. Machine features Lathes from this series can be used for many tasks such as turning internal and external surfaces, tapers turning, buffing, modular and DP threading, drilling and internal broaching By default equipped with a 3 axes digital readout Modern and precise spindle bearings 52 mm large spindle bore Heavy bed made of cast iron, ground and inductively hardened Gear wheels strengthened through hardening and precise grinding Removable bridge allows for greater machining capabilities Protection guards compliant with the newest regulations Machining accuracy: circularity deviation below 0.01 mm, cylindricality deviation no more than 0.02 mm for 200 mm long measurement, perfect surface finish Equipped with a mechanical foot mechanical brake Possibility of equipping the lathe with a ruler for turning tapers Optional VARIO model with a smooth spindle speed adjustment and a digital indicator Technical data Swing over bed Bcedpfjrh E Smjx Abdjw 410 mm Swing over cross slide 255 mm Swing over gap bridge 580 mm Turning length in gap bridge 190 mm Centres distance 1500 mm Centres height 205 mm Bed inductively hardened Bed width 250 mm Spindle bore diameter 52 mm Spindle tip D1-6 Spindle mount MK6 Spindle speed (16) 45–1800 rpm Maximum tool dimensions 20 mm×20 mm Longitudinal feed range (17) 0.05–1.7 mm/turn Transverse feed range (17) 0.025 – 0.85 mm/turn Metric thread (42) 0.2–14 mm Inch thread (45) 2–72 T.P.I. Modular thread 0.3–3.5 M.P (18) D.P. thread 8–44 D.P. (21) Tailstock quill diameter 50 mm Tailstock quill extension 120 mm Tailstock quill tip MK 4 Digital readout in 3 axes Main motor power 3.0/4.5 kW Flood coolant pump power 0.1 kW Dimensions 2440×850×1320 mm Net weight 1830 kg

Condition: like new (used), Year of construction: 2022, We offer this Hammel VB 450 DK twin-shaft shredder, year of manufacture 2022, in as-new condition. Bcjdeyc Hdyjpfx Abdow

Condition: used, Grinding wheel dimensions: Diameter 175 mm Width 25 mm Bcsdpfx Ajby Hh Iobdsw Bore 51 mm electr. connection: Alternating current 220 V, 420 W kW space requirement: 400 x 400 x 1140 mm weight: 33 kg