The SICAR CL2NRT wide-belt sander
Location
Gorzów Wlkp.
9bw7dkw
Conditions of delivery
Cost of delivery
to be agreed
Start type
to be agreed
Description
Comments
dwywałowa with a boot
one motor feeds two shafts
6
6.000 €
Bidding plus VAT
18 days left
18 days left
control make: Siemens, type: Simatic Panel, max. grinding width: approx. 1500 mm
Guvc8yj
New belt grinding machine BERNARDO Type MS 75x2000 S
Bandwidth 75 mm
Band length 2000 mm
Belt speed 29 m/sec.
Speed 2800 rpm.
Engine power 3 KW = S1 at 100%ED
Mains connection 400 volts, 50 Hz, 16 ampere CEE plug
Contact disc/drive disc of 200 x 75 mm
- Surface grinding table 75 x 460 mm with graphite base
- Hinged metal cover over the surface grinding table
- Contact disc with polyurethane flooring
- Safety switch with motor protection and undervoltage trigger
2rbuf3
- Prepared for external suc...
Second-hand machineBuilt: 1964Condition: according to ageTable size 2600 x 900 mmSanding length max. usable 2500 mmBelt length 7100 mm x 150 mm1100 mm Belt offset rightAvailability: short termLocation: Röllbach Pick-up price !
Bmw0hqdf7d
Table dimensions 3000 x 1000 mm
throat 1000 mm
motor power 7,5 kw
sanding belt measurements 7800 x 150 mm
stroke of moving table 300 mm
working length 2600 mm
Working width 150 mm
Length of sanding paper 7800 mm
Gi0c9dpsm
Dust suction hood 180 mm
total power requirement 9,8 kW
With 2 sanding units consisting of: - Calibration roller - Combination unit with rigid shoe - Roller table at the inlet 350 mm - Roller table at the outlet 350 mm second hand Make SCM - DMC - Technosand Type TC 1100 MC Year of manufacture 2000 Machine no. SA / 004295 Working width approx. 1100 mm Passage height approx. 160 mm CE-type tested Number of units 2 pieces Belt dimensions 2630 mm x 1150 mm 1 piece calibrating roller 22 kW fluted 1 piece combination unit 11 kW with rubberized roller Diam...
Working width: 1700 mm
number of grinding units: st.
Workpiece thickness max.: 150 - . 4,0 mm
grinding belt dimensiones: Umlauf mm
Wfb2c
machine dimensions LxWxH: 4,8 x 2,7 x 2,35 m
total power requirement: ca. 6,0 kW
For woodworking!!!!!
pneumatic conveyor guide
height adjustment via hand wheel
EMERGENCY STOP switch
- grinding rolls adjustment
- band clamping device
- roller conveyor ( infeed and outlet each L: 2800 x W: 1700 mm each with6 pc Rolls) motoric driven
- operation via control panel...
table-size 3.000x800 mm
Bszajr3cib
2,2/3 kW
power driven height adjustment 0,5
1 kW
New belt grinder BERNARDO type MS 150x2000 SBandbandband width 150 mmBand length 2000 mmBelt speed 29 m/sec. speed 2800 rpm.Motor power 4 KW = S1 at 100펥tzanschluß 400 Volt, 50 Hz, 16 Ampere CEE-plug Contact disc/drive disc Ø 200 x 150 mm- Surface grinding table 150 x 460 mm with graphite underlay- hinged metal cover over the surface grinding table Contact disc with polyurethane coating- safety switch with motor protection- and undervoltage release with motor protection- and undervoltage release...
Exhibition machine
Year of construction: 2020
Equipment and technical data:
2-BAND MACHINE - 1-band roller and 2. d combi-aggregates roller/shoe for solid wood veneer and intermediate lacquer sanding
- Usable WORKING WIDTH mm 1100
- BAND LENGTH mm 1120 X 2150
- MAX. WORKPIECE THICKNESS mm 160
- Steel CALIBRATOR ROLL mm 150
- Rubber coated sanding roller mm 150 mm
- GRINDING SHOE WIDTH mm 50
- BELT MOTOR POWER PS 15
- BAND SPEED m/s 18
- FEED MOTOR POWER PS 0,75
- Variable speed gear Feed carpet ...
Technical characteristics
Bp9ugkhdhe
Special stainless steel brushing Useful width: 1300mm Power and Motors
Overall dimensions
With 2 sanding units consisting of:
- Calibration roller
- Combination unit with electronic shoe
- Lacquer sanding
- dust brush
- dust cleaning
- vacuum carpet
- Self-made table at the inlet
- Self-made table at the outlet
- program control
incl. brand new feeder carpet org. packed without installation
used, top equipment
Make Bütfering
Type Vega 213 E
Bpnnjk8g9h
Year of construction 1998
Machine no. 49576
Working width approx. 1350 mm
Passage height approx. 160 mm
CE-type tested
Number of u...
Working hours machine: 372 h
max. working width: 1350 mm
workable material thickness: 0,5-160 mm
number of aggregates: 4
Aggregate configuration: RPPB
Standard configuration
Extended machine accessories
Blmblomat7
OFFER 20363
Zvpj2man
Technical data:
- Sanding belt dimensions each approx. 50 x 2000 mm
- speeds 1450 / 2900 rpm
- drive 400 V / 0,9 / 1,3 kW
- motor grinding dust extraction make LOESER type E 900 W
- space requirement grinding m. approx. W 950 x H 1900 x D 500 mm
- space requirement suction approx. W 600 x H 1000 x D 800 mm
- Weight approx. 350 kg
Combination machine.
Btb9hu80s2
Roller shoe with 2 sanding shoes 1x rigid 1x air cushion shoe.
Working width 1100mm with brush unit, with instruction manual.
Used machine
Condition: very good
Year of manufacture: 2003
-tolerance accurate calibrating with the contact roller
-sanding of solid wood 1st unit contact roller 2nd unit link pressure beam
-sanding of veneered workpieces with both sectional pressure beams
-intermediate varnish sanding with either one or two sanding units
Equipment and technical data:
constant working height
grinding width 1350 mm
workpiece thickness min./max. 3 - 150 mm
Operating terminal with 50 program memory locations
CPS ...
Technical characteristics
Osglh
1st group of sanding cylinder 15hp
2nd matrix group 15 hp
floating table
pneumatic tension Number of sanding groups: 2 Useful width: 900mm Power and Motors
Overall dimensions
Butfering 211-E
Sanding Width 1100mm
Sanding Depth 3-150mm
Roller 11KW
Pad Segmented 11KW
Year 1995
Br9qoxc8wr
Infeed out Feed support tables
Sanding Belt Length 1120-1900mm
Foot Print 1750mm W X 2200mm L
Weight 3000KG
CATALOG NUMBER 6090
TECHNICAL DATA
- max width of the workpiece 900mm
- max height of the workpiece 160mm
2 aggregates:
1) grooved rubber roller for calibration
Btz3pue70t
2) grooved rubber roller
in advance:
- pressure
- 9.3 kW generator
- pressure
- 9,3kWw generator
- rubber roller, slip 2 pcs
from down:
- rubber skid rollers 2 pcs
- pulling tape
- oscillation of pneumatic strips on photocells
- grinding thickness potentiometer
- blowing off the tape
- electric table top lifting + manual
- 0.3...
Working width 1350 mm
Min. ÷ Max. working height 4÷170 mm
Sanding belt width 1370 mm
Sanding belt length 2150 mm
2 feed speeds 4,5-9 m/min
Feeding motor power (HP) 0,45/0,8 kW (0,6/1,1)
Main motor power, versions with 2 operating units (HP) 15kW (20) 50Hz
Electronic device for worktable positioning
Worktable
Table equipped with joint-less feed conveyor with negative
profile for better precision. Additional infeed and outfeed table
with 2 idle rollers
The raise & fall of the worktable is po...
The HBS 100x1220 is the perfect universal belt sander for every metal worker, craftsman or other company.
Data
-Metal belt grinding machine
-type HBS 100x1220
-Belt size: 100x1220mm
-1x belt speeds
-Belt speed 19m/s
-motor speed 2860 rpm
-contact wheel: diameter/width 127/100mm
O8nuz
-voltage: 400V
-Motor power: 1,5 KW
-Weight: 42Kg
Used machine
Condition: age-appropriate
- space requirement: 4200 x 2600 mm
- belt dimensions: 7800 x 150 mm
- Table size:2900 x 1400 mm
- working length: 2800 mm
- Passage under hinge: 340 mm
- crank right: 1100 mm
- Drive motor: 7,5 kw
- Weight: 1100 kg
availability: short term
Bmn0oswthp
Location: Röllbach
Technical characteristics
1st steel roller, 140 mm, 11 kW
pneumatic on / off
2nd combined roller 45 sh and felt pad
pneumatic on / off
Offib
digital thickness display
Automatic probe
feed speed 4.5 / 9m / min
new carpet
automatic belt centering Number of sanding groups: 2 Useful width: 1100mm Power and Motors
Overall dimensions
Hi, everybody,
I offer here my belt sander from the company MAKA model SM 3000.
- electric height adjustment
- sanding belt cover
- right - / left rotation
- 2 sanding belt speeds
table size 2900x790mm
throat 550mm
motor 2,2kW
grinding belt dimension LXB 7800x150
year of construction 1994
Exhaust connection right and left 160mm whereby we have exhausted the machine only on one side, goes also.
2017 I bought the machine.
In 2018 I had the machine serviced and subsequently had the round guides ren...
CATALOG NUMBER 6136
TECHNICAL DATA
- max width of the workpiece: 630mm
- max height of the workpiece 150mm
2 aggregates:
1) grooved rubber roller for calibration + pneumatic grinding thickness adjustment (roller adjustment)
2) grooved rubber roller for calibration + shoe
B27u00fs
in advance:
- slip rubber introductory roller
- aggregate
- rubber skid roller
- aggregate
- sliding rubber lead-out roller
from down:
- 3 metal rollers, sliding
- pulling tape
- 3 metal rollers, sliding
- oscillation o...
1 used profile belt sander
make Zimmermann
type PS1/2
year 81
Technical data:
Grinding machine with swivelling table. Ideal for model making and mould
mould making. For precise grinding of contours.
Bs8kooge09
Drive motor with two speeds 380V / 1,5kW
Sanding belt speed approx. 15 or 30 m/s
Direction of rotation alternatively left - right switchable
machine table approx. 700 x 600mm
table can be swivelled 20 degrees upwards and 45 degrees downwards
Removable upper suction arm for sanding large p...
Sandig machine suitable for lacquer sanding, veneer cut, light calibration cut
Sanding width 1350 mm
Working height 900 mm
Min./max. working thickness (fixed worktable) 4 - 200 mm. Worktable with fixed height (movable head). For this feature the machine can also work in a automatic production line.
Safe workpiece guidance by rubberized, spring-guided pressure rollers before and after workpiece recognition or before and after the grinding unit.
EPICS electronic sectional pad - electronically c...
This Weber wide belt sander can be used for calibrating and for veneer fine sanding by means of link pressure beams.
The collection, disassembly and assembly must be organized by yourself.
Bty0qodsit
Technical characteristics
Roller table extention
electrical adjustment display
feed speed 3 to 20 m / min
independent 11 kW motorization
automatic probe
Cwo9x8ee
vacuumed carpet Number of sanding groups: 3 Useful width: 1350mm Roller diameter: 320 mm Power and Motors
Power: 11 Kw Overall dimensions
Second-hand machineCondition: according to ageTable size 2600 x 900 mmSanding length max. usable 2500 mmBelt length 7100 mm x 150 mm1100 mm cranking rightAvailability: short termLocation: Solingen
Bmw2cknah7
Working width:1.100 mm
Number of sanding units:1 st.
Workpiece thickness max.:100 mm
sanding belt measurements:1120x2620 mm
Motor roller:18,5 kW
Bmfoqosp3n
Feed motor:1,1 kW
Feed speed:1,5-18 m/min.
conveyor belt:100 x 4800 mm
:20 m/sec
:2620 mm
:1100 mm
:2 -
:Weber -
:900 mm
:93.436.255 -
:4100 kg
:1770 x 3600 x 2345 cm
:77 kVA
KBM long belt sanding machines in double belt design offer the possibility of carrying out two work steps directly one after the other on one machine or with one device - sanding and finishing. They save set-up times and produce more efficiently.
Btdduudcra
Long belt sanding machines have a narrow, long, endless sanding belt which is guided over two rollers (drive roller and tension roller).
A height-adjustable work table serves as workpiece support. The sanding belt is pressed onto the workpiec...
With 2 sanding units consisting of:
- calibration roller
- Combination unit with running shoe
with a new feed carpet
second hand
Make Sandingmaster
Type CSB2-600
Machine no. 7612312
Operating hours 7805.45
Working width 600 mm
Passage height approx. 150 mm
Aggregates from above 2 pieces
Belt dimensions 630 mm x 900 mm
Feed speed 7/14 m / min.
1 piece calibration roller 7.5 kW
Diameter 250 mm
1 piece combination unit 7.5 kW with rubberized roller
Btmsqlapji
Air shoe
Required space approx. 160...
Technical characteristics
RollersVariable advance
1st roller Ø 170 mm steel
2nd roller Ø 240 mm 90 sh
variable feed speed
inlet / outlet roller table Number of sanding groups: 2 Useful width: 1100mm Roller diameter: 170 / 240 mm Shoring hardness: 90 Sh Power and Motors
Bmdkqjixah
Power: 2 groupes / 2 moteurs Kw Overall dimensions
-Bütfering Optimat SWT 124/RK 110
-heavy wide belt calibrating fine grinding machine
-1. aggregate steel contact roller
-2. aggregate combined contact roller 65 Sh, DM 160 mm and pneum. Sanding shoe unit
Cgiot9ai
-automatic grain compensation for sanding belt
-automatic workpiece dimension
-working width 1100 mm
-feed speed infinitely variable 2,5 - 13 m/min.
-motor power 1st unit 15 kW
-motor power 2nd unit 11 kW
-clear control panel for the control of all aggregates
-year of construction 2012
...
Long belt sander, with sanding belts, belt length 7500 mm, total width 3,90 m, table length 2,50 m, table height adjustable, sanding belt width 150 mm, for sale to self-collector, who also dismantles and removes the machine himself.
Btsidzqz0u
I have for sale two wide-belt grinders Tagliabue Italian production.
Year: 1997
CE marked
Btxjqsv
Operational
The price is given for a set. Can be sold separately
OTT EU 110 WS Wide-Belt Sander
- machine in stock
- after the technical review
- very good condition
- year of production 1995
- German production
- CE marking
TECHNICAL PARAMETERS:
grinding width 1100 mm
grinding height 3-160 mm
pneumatic oscillation
electric height adjustment
pneumatic straps tension
1 unit - rubber roller
shaft diameter 160 mm
90 shore hardness
2 aggregate - combo shoe
rubber shaft
90 shore hardness
pneumatic shoe
possibility of grinding with a shaft / shaft with a shoe /...
Technical characteristics
High digital display
1 combined roller / pneumatic sectioned pad sanding unit
feeler
antistatic brush unit at outlet
vacuum rubber mat Number of sanding groups: 1 Useful width: 1100mm Advance speed: 2 à 18 m/min Power and Motors
Overall dimensions
Ok7hutp2
CONSTANT TABLE MACHINE / autom. head adjustment
-stable frame construction with constant workpiece infeed height of 900 mm by adjusting the machine head. workpiece thickness adjustment from 3 - 160 mm
-1. unit combined steel contact roller and electronically controlled segment sanding shoe unit CPS II system with variable sanding pressure
-2. unit cleaning - brush unit
-stable VAKUUMTISCH for a large surface support
-large transport safety by suction clamping device -high-performance blower with...
Robust design also allows the machining of longer workpieces
Sanding unit swivels, therefore also usable as edge sanding machine
225 mm large balanced belt rollers ensure low-vibration drive.
Easy adjustment of the grinding belt
High belt speed of 17 m/s
Right-left rotation
Upper grinding sole with graphite coating
grinding shoe 4-fold spring mounted
With movable grinding shoe for bevelled surfaces
Smooth-running grinding table even with high loads from heavy workpieces
Optimal price-performance...
Bandwidth: 150mm
Btxnbzin3c
Table size: approx. 2500mm x 800mm
Suction connection: 140mm
Engine power: 4kW
Machine length: approx. 3600mm
Machine width: 1200mm
Weight: 500kg
Heesemann wide belt sander MFA 5, width 110cm, working height: 3-150mm, combi aggregate for solid wood and lacquer sanding, new carpet, good stock of sanding paper included. Can be tested on site. Lifting can be arranged.
Mf93qaqt
Made in Switzerland
Technical specifications:
Working width: 1350 mm
Grinding band: 1350 x 2000 mm
Segment width: 22 mm
Suction diameter: 250 mm
Fxb9svpse
Max. Volume flow: 4300 m/h
Nominal speed: 2300 min-1
Engine power: 5.5/6.5 kW
Dimensions:
Length: 1510 mm
Height: 790 mm
Width: 3270 mm
Weight: 670 Kg
More info:
Dust Extraction System included! For 900€ more price.
Notes:
Availability immediately
