Used Sanding Table for sale (17,699)

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. Lredpfx Aefyadbedtjk The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: new, Year of construction: 2026, Professional Table for Sanding Wood and Metal. A filtration device that is suitable for use wherever sanding operations are performed. RADIANT FAN, HIGHER VACUUM PRESSURE. Our equipment is installed in carpentry workshops, furniture workshops, and industrial paint shops. Designed for sanding wood and metal. The table is equipped with an independent dual filtration system, ensuring precise air purification from all contaminants! A special high-efficiency radial fan guarantees long operation without the need to change the filtration materials. The five-segment work table makes it easier to position workpieces and clean the filters. Quick and easy filter replacement. The table is equipped with pins and clamps for mounting workpieces. Ventilation system at the bottom and on the side of the table. Filter resistant to high temperatures, but not fireproof. Segregation of "large" and "small" sanding waste. Spacious metal drawer. High vacuum pressure (dust filtration efficiency > 99.9%). Technical Specifications: Work surface dimensions: 1000 x 550 mm Working height: 850 mm Airflow capacity: 4000 m³/h Filter size: 2 x (395 x 495 x 24 mm) Motor power (S1): 1.0 kW Voltage: 230V Weight: 70 kg Dimensions: 1050 x 600 x 850 mm Lrodpfxsv R Tihj Adtsk

Condition: new, Year of construction: 2026, DT1500M Grinding Table – Professional Workstation for Metal Sanding The DT1500M Grinding Table is a modern solution designed for intensive locksmith and industrial applications that require effective extraction of dust and fumes. Thanks to its dual independent fans and efficient filtration system, this sanding table ensures a high level of workplace safety and environmental protection. It's an ideal choice for industrial facilities, mechanical workshops, paint shops, and metalworking studios. Key Advantages Dual filtration system – Captures over 99.9% of dust particles, protecting both the operator and the surrounding environment. High ventilation performance – Two centrifugal fans with a combined capacity of 8000 m³/h. Eleven worktop segments – Provide ergonomic working conditions and make filter cleaning easier. Bottom and side ventilation – Effectively removes contaminants from various work zones. Metal waste drawers – Located on both sides for easy disposal of sanding debris. Heat-resistant filters – Ensure durability even under demanding conditions. Construction and Technology The DT1500M is built with a robust welded steel frame that resists vibrations and mechanical damage. Two built-in suction units and a dual-filtration system ensure quiet, reliable operation. The modular segmented worktop allows easy fixture of workpieces and simplifies maintenance. Precision and Work Efficiency Equipped with high-performance centrifugal fans and precise filtration systems, the DT1500M supports continuous and safe operation, even during heavy-duty metal grinding. Noise-dampening components and a carefully engineered airflow system contribute to both efficiency and ergonomics. Applications The DT1500M is ideal wherever harmful metal particles and dust must be removed – including locksmith workshops, paint shops, assembly lines, and industrial plants using grinding tables for daily component processing. Lrodew Hcrpjpfx Adtok Standard Equipment Dual air filtration system Two centrifugal fans (left and right side) Metal waste drawers Segmented worktop Ventilation system from bottom and side panels Technical Specifications Parameter Value Worktop dimensions 1530 × 510 mm Motor power 2 × 0.75 kW Airflow capacity 2 × 4000 m³/h Filter dimensions 2 × (395 × 495 × 24 mm) Voltage 230V Weight 102 kg Dimensions (L×W×H) 1560 × 560 × 850 mm

Year of construction: 1977, condition: excellent (used), I sell the bottom widebelt sanding machine Butfering FBS2 1100, year 1977. Ledpfx Asdv N R Ujdtsrk Configuration sanding pad - pad. Working width 1100mm. Total weight 4000kg Suitable for line. Construction with fixed working table height.

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Lrjdpfx Adoynz Rlotjk Submitting a bid obligates collection within the specified timeframe: either between 11/05/2026 and 13/05/2026, or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Contents: 3 devices for concentricity testing Center height 1: 150 mm Center height 2: 80 mm Center height 3: 100 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1500 x 1000 x 2200 mm Machine weight: 700 kg External reference: Pieper - Lot 152

Condition: excellent (used), Year of construction: 2023, working width 1300 mm workpiece height max. 3 - 140 mm Lredoylp A Dspfx Adtok Control Xinje XD5 min/max. pitch cone length 200 - mm total power requirement 13,4 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,1 x 2 x 2,3 m

Condition: not inspected (used), functionality: unexamined, total height: 860 mm, total length: 2,000 mm, total width: 1,000 mm, overall weight: 1,500 kg, hole diameter: 16 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates you to timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Lrjdpfx Aeym Rytjdtok Number of holes: 800 Hole diameter: 16 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,000 x 860 mm Weight: 1,500 kg EQUIPMENT Lot clamping devices External reference: CES - Lot 91

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, working width: 1,300 mm, workpiece height (max.): 140 mm, controller model: Xinje XD5, empty load weight: 4,500 kg, working length: 200 mm, TECHNICAL DETAILS 1st Station: 15 cup grinding brushes with quick-change mount 2nd Station: 15 cup grinding brushes with quick-change mount 3rd Station: 9 tangentially arranged grinding brushes 4th Station: Crosswise roller with grinding brushes over the entire working width 5th Station: Crosswise roller with grinding brushes over the entire working width 6th Station: Air nozzle across the entire working width Lsdox Tt Uuepfx Adterk Working width: 1,300 mm Working length: 200 mm Workpiece height: 3 - 140 mm MACHINE DETAILS Control system: Xinje XD5 Total power requirement: 13.4 kW Dimensions & Weight Required floor space: approx. 5.1 x 2 x 2.3 m Machine weight: approx. 4,500 kg EQUIPMENT Modular control of the module units Frequency converter for speed control Automatic adjustment of working height range Oscillating blowing air in the final section Easy maintenance and replacement of abrasive paper and brushes Spare brushes Grinding inserts Rubber conveyor belt with herringbone pattern, solid steel plate underneath across full width

Condition: good (used), Fetra Table top Cart 127x80cm with 3 shelves Perfect condition, like new. Modular design. Powder-coated blue. Non-marking thermoplastic rubber tread, wheels with precision ball bearings. Ledpfx Aoyury Rodterk 2 swivel wheels with brakes and 2 fixed wheels. Load capacity: 500 kg

Condition: used, Roller support for saw, composed of: 2 supports: L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm 1 support fitted on machine side (see photo): L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm Rolls width: 450 mm Lodpfxeyn Nxwo Adtork

Condition: good (used), Rotating table Lazy Susan Perfect for buffering products, bags or trays prior to further handling. This to prevent from overflowing and giving several issues in (automatic) production lines. Ledpstpgxiofx Adterk Height: 80 cm (height is adjustable) Diamter: 120 cm

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Lrodjxvwcxspfx Adtjk Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton)

Condition: good (used), Table size:1500x1500mm Capacity : 6t Lodpfxofvqmxs Adterk Dimension: 1600x2500x2000mm Hydraulic

Condition: good (used), Year of construction: 2003, functionality: fully functional, VIET CHALLENGE 333 TM + VALERIA 3CCC Inf Ljdpfow A Ng Esx Adtork Minimum thickness: 3.0 mm Maximum thickness: 160 mm Maximum width: 1350 mm Minimum length: 250 mm Abrasive belt size: 1400x2620 mm Rollers: 3 + 3 (rubber) Surface cleaning system with brush and air on both sides Maximum feed speed: 20.5 m/min Can operate in 4 different modes: 1. Both machines – all 3 rollers driven on each machine 2. Both machines – only the last 2 rollers driven on each machine 4. Machine with top contact – all 3 rollers driven or only the last 2 rollers Tolerance: 0.2–0.3 mm for a panel with 1250 mm width Roller configuration: Machine 1 – Bottom sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 Machine 2 – Top sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 The machine is assembled and can be tested.

Condition: used, Outfeed table before resaw IDL000793 Lrodpeul Rgvefx Adtsk

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner Lredpju Smq Sjfx Adtjk - log infeed conveyor

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m Ljdpfx Ajtddw Asdtjrk - total width: 1200 mm - height: 950 mm Hydraulic lift, lifting capacity around 1 ton.

Condition: new, functionality: fully functional, power: 1.1 kW (1.50 HP), Year of construction: 2026, G450 Gemini table for gold beneficiation and seperation Ledpfsytnn Ijx Adterk

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, punching force: 1,000 t, operating speed: 93 mm/s, stroke length: 55 mm, table length: 1,100 mm, table width: 800 mm, machine/vehicle number: 100597, TECHNICAL DETAILS Press force: 10,000 kN Table surface (W x D): 1,100 x 800 mm Stroke range: 15 - 55 mm Lrodpjy Ampdsfx Adtjk Clearance at max. stroke: 28 - 98 mm Puzzle thickness: up to 3 mm Format width (max.): 1,100 mm Punching speeds Upwards: 47.8 mm/s Downwards: 93.7 mm/s Punching: 0.28 mm/s Hydraulic unit Type: 250 Dimensions (L x W): 1,310 x 910 mm Oil capacity: 670 l Unit weight: 1,000 kg Oil weight: approx. 550 kg Weight with oil fill: approx. 1,550 kg Automatic punching table Type: 355 Table top size (W x D x thickness): 1,000 x 700 x 10 mm Hardness: 62 HRC Surface finish: 7 MACHINE DETAILS Electrics Operating voltage: 400 V Frequency: 50 Hz Rated machine current: 50 A Incoming line protection: 63 A Control voltage: 230/24 V Rated power: approx. 30 kW Protection class: IP 54 Power requirement: approx. 8 kW Pneumatics Operating pressure: 6 bar Dimensions & Weight Puzzle disassembler dimensions (L x W x H): 3,150 x 1,620 x 2,900 mm Working height: approx. 1,700 mm Total weight: 33,000 kg Weight of puzzle disassembler: approx. 1.8 t Noise level: < 70 dB(A)

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, cutting height (max.): 155 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, rotational speed (max.): 6,000 rpm, section length (max.): 3,450 mm, TECHNICAL DETAILS Maximum cutting height: 155 mm Maximum cutting height at 45°: 105 mm Maximum cutting width: 1,250 mm Maximum cutting length: 3,450 mm Maximum saw blade diameter: 450 mm Bore diameter: 30 mm Saw blade tilt range: 0 - 46° Speeds: 3,000 / 4,000 / 5,000 / 6,000 rpm Sliding table length: 3,200 mm Scorer: Auto-EPS with motorized positioning for lateral and height adjustment Cross carriage: Standard, with 3 digital flip stops, extendable up to 3,500 mm Rip fence: Motorized control, with positioning control to 0.1 mm MACHINE DETAILS Motor power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,700 x 2,300 x 1,700 mm Ljdpoyx Et Hofx Adterk Machine weight: 1,250 kg EQUIPMENT Electrical axis control Sliding table completely readjusted Ruler carrier replaced with new system, featuring 3 flip stops Stainless steel scale for angle adjustment renewed Cross carriage checked Longitudinal fence with 90° locking completely replaced Machine electrically inspected Machine completely readjusted, checked, and lubricated Note: The specified data are partially taken from manufacturer's brochures or documents and may differ from the actual values.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 14219, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 560 mm, spindle diameter: 75 mm, spindle speed (max.): 1,800 rpm, With digital display of travel distances! TECHNICAL DETAILS X-axis: 1,250 mm Y-axis: 900 mm Z-axis (or W-axis): 560 mm Ledpfsy Emq Tjx Adtsrk Spindle diameter: 75 mm Spindle speeds: 18–1,800 rpm Table size: 950 mm x 950 mm MACHINE DETAILS Weight: 10,000 kg EQUIPMENT Accessories shown in the photos, including tools, tool cabinets, and clamping devices

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 950 mm, spindle diameter: 128 mm, controller model: HEIDENHAIN iTNC530, The machine was overhauled and modernized in 2005. Repairs were carried out in 2025. The following work was performed: - Cleaning of the machine - Overhaul and adjustment of machine geometry - Overhaul of machine functionality - Overhaul of electrical equipment - Overhaul of hydraulics and lubrication Lodey Edl Uepfx Adterk - Backlash compensation and drive optimization - Replacement of guideway wipers - Repair of the telescopic cover - Overhaul of the CHOV-K 10 bar tool cooling system - Overhaul of the AVN40 tool changer TECHNICAL DETAILS Main spindle diameter: 128.57 mm Tool holder: ISO 50 Spindle speed range: 5,000 rpm Travel X-axis: 1,600 mm Travel Y-axis: 920 mm Travel Z-axis: 950 mm Clamping surface of table: 850 x 850 mm (850 x 1,600 mm including additional supports) Table load capacity: 3,000 kg MACHINE DETAILS Control: HEIDENHAIN iTNC530 EQUIPMENT - Handwheel - SIEMENS motors and drives - CNC table - full B-axis control - CHOV-K 10 bar - through-spindle cooling – emulsion - ATC40 - automatic tool changer - Operator console protected against chips and coolant - Workpiece cover

Condition: ready for operation (used), Year of construction: 1983, operating hours: 8,529 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle diameter: 100 mm, The machine was modernised and overhauled in 2002! TECHNICAL DETAILS Working spindle diameter: 100 mm Spindle speed range: 1,800 rpm Taper: ISO 50 Spindle travel (W): 630 mm Travel X-axis: 1,200 mm Travel Y-axis: 1,120 mm Travel Z-axis: 950 mm Table clamping surface: 1,000 mm x 1,120 mm Table load capacity: 3,000 kg MACHINE DETAILS Control system: HEIDENHAIN TNC426 Motors and drives: SIEMENS Operating hours (as displayed): Control system on-time: 37,038 h Machine operating time: 30,987 h Program run time: 8,529 h Spindle run time: 12,156 h EQUIPMENT Handwheel: HR410 Lrjdpjy Edgfsfx Adtok

Condition: used, functionality: unexamined, Complete Sand Wash Plant (Trio / Siltbuster) Complete sand wash plant to include: Lsdjy Drtkspfx Adtork Lamela Siltbusters Trio log washer Trio sand washer Trio shaker 700kva generator All assoicated pumps, conveyors, tanks, power packs, framework. Note - partially decommissioned for potential relocation.

Condition: new, Year of construction: 2022, A mid range, industrial level sliding table panel saw for cutting sheet material or timber. Standard features include electric rise / fall / tilt of the saw group, table locking in any position and quick angle setting of the cross cut fence. Specification : Ex College A1 Condition - Unused Worktable dimensions 1000X560 mm Sliding table dimensions 3200X350 mm Max squaring capacity with scorer 3350 mm Cutting width max - blade to rip fence 1300 mm - manually adjusted - scale / pointer Tilting blade 0.45 degrees Max cutting height with blade at 90° d.350 mm 118 mm Max cutting height with blade at 45° (d.350 mm) 81 mm Max sawblade dia and bore size 350/30 mm Saw rotation speeds 3000/4600 RPM Dust extraction outlet on machine base d.100 mm Main sawblade motor 4kW (5.5HP) 50Hz Scoring motor 0.55kW (0.75HP) Max squaring with stops 3600 mm STANDARD EQUIPMENT: Carriage in anodised aluminium alloy sliding on high precision adjustable guides in hardened and ground steel Mitre gauge on sliding table 90° quick locking and single degree tilting scale plus reference at 10, 15, 22.5, 30 and, 45 degrees. Quick fence positioning at 90° 10° 15° 22.5° 30° 45° keeping without change the stop position in reference to the blade position. Anodised aluminium profiles Table locking in any position Main saw blade speed change accessed through the table Sliding table with push handle Eccentric workpiece clamp Motorised blade rise / fall Motorised sawblade tilting with electronic read out Electrical safety micro switches on access door Overload switch protection Key locking master witch Emergency stop Electromagnetic main motor brake Lodpjy Efz Rjfx Adtork CE compliant overhead saw guard with extraction point Outfeed side extension table Complete with set of sawblades - 350dx30x3.2 Z60 and 120dx20x3.5 Z24