Belt shifter buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cjea9uv INCLINE CLEATED BELT CONVEYOR -- Incline Cleated Belt Conveyor -- 48" Wide belt conveyor -- 2" high cleats -- 16'6" long -- 2 HP motor -- Reconditioned with 90 days warranty -- Allow 8 to 10 weeks for delivery more
5
Conveyor, belt conveyor, conveyor, belt conveyor, chain conveyor Drive driving engine of 0.37 kw belt width 15 mm 3gy77ggh Length 400 mm Speed adjustable 14-56 m / min -2 x conveyors available Award pieces Weight units 88 kg more
4
length in total 20584 mm band width 225 mm conveying height 3030 mm 17000 mm total power requirement 2 KW weight of the machine ca. 9 t Bccqu0vqrx Conveyor with 4 horizontal elements (each 4100 mm long) and one vertical element. Conveyor has a level sensor and a pump for water. Conveyor could be reduced in length to 4700 mm, 8800 mm or 12900 mm. more
6
Manufacturer Paal Typ Konti 700 E Year of construction 2007 Hours of operation 22,500 h Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 2,000 x 1,020 mm (l x w) Capacity per cycle time 3,45 cbm Throughput rate under operating conditions 650 cbm/h Bale size 1,100 x 1,100 mm (w x h) length adjustable Driving motor 3 x 75 kW Connected load 255 kW Tying system 5-fold vertical, fully automated Throughput rate bulk weight of 30 kg/cbm approx. 16 to/h bulk weight of 50 ... more
1

Conveyor belt BFNKV-GI

Schwäbisch Gmünd , GermanyGermany
6698 km
1991
unexamined (used)
Conveyor type BFNKV-GI, built in 1991 Bccoka8mn3 more
10
Offered here is a compact band filter of manufacturer RESY. The unit was taken from a fully functional machine and is therefore fully operational. Bcbledefp0 You located visually as technically in a good condition and may be viewed by appointment only and tested. Make: Resy Type: CBF 1001/1040 Year of construction: 2000 Filter bandwidth: 1000 mm Overall Lxwxh: CA. 2000 x 1750 x 2450 mm Weight: approx. 2500 kg more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbuuatn7fz TIMESAVERS 2321-45-01 Wide Belt Sander2-Head, 51" width cap. with (1) contact roll, and (1) combination head with contact roll and finishing platen. -- 1st Head: Rubber covered contact roll, 8" dia., 30 HP motor. -- 2nd Head: Combination head with a rubber covered contact roll 5-1/2" dia. and 2-1/2" wide segmented finishing platen, 25 HP motor, (2) dial indicators for contact roll height adjustment. -- 52" x 103" Abrasive belts, "Posi-Trak" el... more
5
Conveyor, belt conveyor, conveyor, belt conveyor Wviinfjsa Speed 27 m / min Drive 0.6 of kW belt width 450 mm Belt length 2040 mm Powered roller conveyor Roll width 550 mm Transport length 960 mm Rollers ø 31 mm Roller spacing 40 mm Height 850 mm adjustable tilting Transport dimension 3160/620/H850 mm Weight 354 kg more
5
Hinge belt conveyor / insert sponsor Manufacturer: AXA Type: FSB 300 Year of construction: 1990 Task length: 2300 Discharge height: 1000 Overall length: 3500 Item width: 275 Mortise width: 365 Emulsion tank: no Condition: used / ready to use This offer is aimed at commercial people. Mmbrsj77 Prices are net. We will gladly create an individual offer for you. To do this, please send us your complete contact information. Offer staying free, intermediate sale is reserved. ... more
6
Manufacturer unoTech GmbH, Niederlangen, Germany Typ 120 V5 Year of construction 2009 Hours of operation 52.810 h, stand January 2018 Press force main press 100 to Specific press force 145 N/m² Max. cutting force 120 to Press force free stamper 25 to Feed channel 2.000 x 1.020 mm (L x W) Capacity per cycle time 1,5 m³ Theoretic throughput rate 650 m³/h Bale size 1.100 x 750 mm (w x h) Driving motor 2 x 75 kW Connected load 160 kW Rated current 280 A Tying system 5-fold vertical, fully automati... more


belt shifter
daily

New machines via email!

Stay updated!
15
CATALOG NUMBER 4990 TECHNICAL DATA max. width of the workpiece 950mm max. height of the workpiece 160mm   *in advance: 2 pressure rollers, sliding + grooved rubber roller + shoe with pneumatic clamp + metal roller, sliding, smooth + pressure roller + + *from down: 3 rubber, sliding, inserting rollers + towing tape + Nv2vrwsh 2 slipping shafts +   positioner for setting grinding thickness + oscillation of pneumatic + straps brake + raising the electric table + 11kW main ... more
6

Long belt sander Wesetslintner BSM250

Schwarzach, AustriaAustria
6766 km
2015
as good as new (ex-display)
Engine power of 3 kW (4PS) Strap length: 6800 mm Band width 150 mm Belt speed 22 m / sec Table size 2500 x 900 mm Electric height adjustment Sanding pad 320 x 145 mm Weight 450 kg Right - and left-hand rotation Fence stable upper grinding table with cover Bcbqw7fvcs more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Yrrt3o TIMESAVER 137-2HP75 Wide Belt sander (2) Heads36" Width cap. Drum, PlatenHead Configuration1st Head: Rubber covered contact roll recently replaced, 25 HP motor2nd Head:Finishing platen, 15 HP motor for veneer sanding Specifications --37" x 60" Abrasive belts, "Posi-Trak" electronic tracking & pneumatic tensioning, --Roller hold-downs --Variable feed speed 15-45 FPM, 1.5 HP feed motor --Automatic conveyor belt tracking and automatic thickness s... more
5
Conveyor, belt conveyor, conveyor, belt conveyor -Förderband with small hollow Lmg72 Drive motor 0.37 KW 93 U/min Band speed 32 m / min Belt width 300 mm Commission role Ø 100 mm Conveyor length 8000 mm Belt height 950 mm Transport dimensions 8000/650/H400 mm Weight 620 kg more
6

Wide belt sander Bütfering classic 211-E

Eching, GermanyGermany dealership location
6861 km
used
3.000 €
Offernot incl. VAT
Another 22 days
Wide belt sander Bütfering classic 211-E Ndjs2 Markus divine furniture Schreinerei 1 piece: Maca/N 48120, year 1998, with two grinding units, working width: 1,100 mm Position: 221 Minimum price: 5,000 EUR plus VAT & premium more
6
Manufacturer Not know Bccj2smlg8 Typ Not know Year of construction Not know Length feeding conveyor 6.000 mm Length elevating conveyor 5.000 mm Effecting width 1.300 mm Height drive axle over ground 2.800 mm Height of side wall feeding conv. 1.300 mm Height of side wall elevating conv. 850 mm Transport dimensions over all 11.500 x 1.700 x 3.700 mm (l x w x h) Comments: Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. more
6
BMSO beltsawmachine offered Odozgmp2 Type: 350 Cutting capacity: 350 mm Speed: 20-100 m/min (stepless) Year of built: 2000 Dimensions: 260x100x165 cm (LxWxH) Weight: 1400 KG For more information call us or send an e-mail. more
1

Conveyor belt M-Fördersysteme GFR

Pegnitz, GermanyGermany dealership location
6765 km
2010
used
Belt width:400 mm Belt length:3400 mm Total belt loading:50 kg height adjustment:200 - 1000 mm electrics - voltage/frequency:400/50 V/Hz Bbirijqzub engine output:0,81 kW weight:80 kg dimensions:3,5 x 0,7 x 1,2 m Payment: 100% prior to delivery more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Glqwr3ata 2-Head, 37" width cap. - 1st Head: Rubber covered contact roll, 6-1/4" Dia. (80-Shore), 20 HP motor. -- 2nd Head: Combination head with 6-1/4" dia. rubber covered contact roll 50-Shore) and 3-1/8" wide "air inflatable/cushioned" finishing platen, 15 HP motor. -- Abrasive belt size 37" x 75", with air tensioning & electronic abrasive belt tracking, conveyor belt feed with 1 HP variable feed drive, 9 - 45 FPM feed speed with inverter, infeed & ou... more
4
V-belt pulley, pulley Diameter 460 mm Total width 278 mm Ma9s7 -10 x belt Belt width 22 mm Recording ø 95 mm Balanced pulley Weight 144 kg other pulleys in stock more
6

Magnetic belt Krupp Elektro Magnet Block

NS Maastricht, NetherlandsNetherlands dealership location
6337 km
used
Electric magnet block. Brand: Krupp. Block: L = 1650 x B = 1200 x H = 600 mm. Power block = 7 kW, 35 amp. Weight about 3.5? 4 tonnes. Including rectifier (new). Bbymimk0fi more
6
Manufacturer BOA Typ 1700 HSB KTH Year of construction 2002, overhauled in 2017 Driving motor 5,5 kW Length feeding conveyor 4.000 mm overall Length elevating conveyor 14.000 mm Length goose neck 1.530 mm Grade 30 ° Effecting width 1.700 mm Ptpo8m Dimensions feed hopper Inside dimensions 1.920 x 1.090 x 3.100 mm (w x d x h) Outside dimensions 2.100 x 1.700 x 3.100 mm (w x d x h) Comments: The conveyor belt and hopper were completely overhauled. The frame construction and side walls as well as... more
1

Wide belt sanding machine (1.100 mm) Bütfering AWS 2 CE 1100

Nordrhein-Westfalen, DeutschlandGermany
6437 km
1992
ready for operation (used)
Wide belt sanding machine (1.100 mm) Ndiah SMA-REF-6262 Type: wide belt sanders Manufacturer: Bütfering Model: AWS 2 CE 1100 Year: 1992 Equipment: 1 Kombi-unit 1 Sanding shoe Working range: Sanding width: 1.100 mm Workpiece heigth: max. 150 mm Sanding band: 1.120 x 1.900 mm Features: suitable for veneer sanding extern. vacuum-unit Workpiece dedusting brush Condition: ready for action Location: Western Germany Availability: on demand more
6

Wide belt sander UNITEK ECO 1100

Eching, GermanyGermany dealership location
6861 km
used
8.000 €
Offernot incl. VAT
Another 17 days
Wide belt sander UNITEK ECO 1100 Beys2it Banks joinery 1 piece: Year 2000, S / N 110107417, 13kW, weight approx. 1t, grinding width 1100 mm, 1 grinding unit, 1 grinding roller, 1 combined aggregate, 1 sanding pad, approx. 1, 5 x 1, 8 x 1, 8 m,. Position: 114 Minimum price: 8,000 EUR plus VAT & premium more
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Gabhlpe VIET S2-321-2200 Wide Belt Sander (3) Heads43" Width cap. Drum, Drum, [...] Configuration:1st Head: Rubber covered contact roll 7-1/2" dia. (90-shore), 25 HP motor.2nd Head: Rubber covered contact roll 7-1/2" dia. (50-shore), 20 HP motor.3rd Head: Rubber covered contact roll, 7-1/2" Dia, (30-shore), 20 HP motorSpecifications: --Width:1100mm, 43” --Auto On/Off Control of Each Working Unit From Main Control Panel --Grooved Pressure Rollers Be... more
5
Conveyor, belt conveyor, conveyor, belt conveyor 3dhwwzsl Speed 4.6 m / min Drive 0.25 of kW belt width 85 mm Belt length 1000 mmm Height 615 mm transport dimension 1400/200/H615 mm Weight 71 kg more
6
Abdulla permanent magnetic belt (unused) Length frame [...] = 2000 mm, width: 1000 mm. Block: L = 1400 x W = 900 x H = 300 mm, power: 1.8 kW AufsteckGetriebe. Ba2dlh3e7q more
6
Technical data feeding conveyor, underfloor, position 12 Manufacturer Bollegraaf Typ HBT 1200/1600 Year of construction 1998 Driving motor 5,5 kW Length feeding conveyor 9.440 mm Effecting width 1.550 mm Height of side wall feeding conv. 550 mm Transport dimensions over all approx. 9.600 x 2.300 x 1.500 mm (L x B x H) Weight approx. 5.000 kg Technical data elevating conveyor with goose neck, position 15 Manufacturer Bollegraaf Typ HBT 1200/1600 Year of construction 1998 Driving motor 5,5 ... more
5

drum belt sander Dankert

Egenhofen / Herrnzell, GermanyGermany dealership location
6816 km
good (used)
7j7z7r9vu Type:  used machine working width: 1000 mm 2 grinding units Year of construction:  location: Warehouse / 82281 Herrnzell more

Belt grinder HUVEMA HU 100 PG-4

Krefeld, GermanyGermany dealership location
6378 km
1917
used
working area 76 mm Number of stations 1 0 789t399cs material length beliebig mm tube diameter mm grinding band dimension 100 x 2000 mm Band Speed 30 m/sec motor speed 2800 U/min 0 3 kW range L-W-H 1,3 x 0,5 x 0,8 m weight 200 kg more
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Bb9nikrieh VIET Challenge 333 Wide Belt Sander,3-Head wide belt sander with vacuum hold [...]: 3-Head, 1,350 mm (53") max. working width. Solid wood and thick veneer sander. Fixed pass line height suitable for working in a line. -- Abrasive Belt lengths 2620 mm x 1380 mm (103" x 54"). -- Feed through speed inverter [...] Configuration: -- 1st Head: Rubber covered contact roll 320 mm (12-1/2") diameter. Shore hardness 80; 25 HP motor, abrasive belt speed... more
4
V-belt pulley, pulley Diameter 570 mm Total width 237 mm -9 x belt Belt width 22 mm Recording ø 90 mm Balanced pulley Weight 127 kg other pulleys in stock Xzep93j02 more
6

Magnetic belt ANDRIN Permanent Magnet Gurt

NS Maastricht, NetherlandsNetherlands dealership location
6337 km
used
Abdulla permanent magnetic belt length frame [...] = 1800 mm belt width: 1200 mm. Block: L = 1200 x B = 1200 x H = 400 mm, power: 3 kW SEW AufsteckGetriebe. Ba2dlrnkrr more
6
Manufacturer Bollegraaf Typ HBT 600/2000 x 21.986 Year of contruction 2000 (overhauled 2017) Ndqcl Drive power 7,5 kW Length infeed conveyor over all 6.723 mm Length module infeed conveyor 5.500 mm Height infeed conveyor over all 1.300 mm Height side wall infeed conveyor 500 mm Length elevating conveyor over all 13.923 mm Lenght module elevating conveyor 13.300 mm Height side wall elevating conveyor 800 mm Gradient of elevating conveyor 30° Length gooseneck 1.340 mm Lenght module gooseneck 1.00... more
6
Working width: 1350 mm Workpiece thickness: 3 - 160 mm N° of units: 2 * Crossbelt sanding unit with inner lamella belt, MSP sanding pad with 2 probes per actuator in the grid 25 mm, belt sizes 5360 x 150 mm, 13,5 kW motor, 2 - 16 m/s belt speed with [...] belt cleaning * Wide belt with inner lamella belt, MSP sanding pad with 2 probes per actuator in the grid 25 mm, belt sizes 2620 x 1370 mm, 18,5 kW motor, 2 - 16 m/s belt speed with freq. Controlls, belt cleaning, additional sanding felt inser... more
3
Data on the machine Conveyor 3520 Haqvllz more
1
Elect./Voltage: 208/480 V, 60 Cy, 3 Ph Bbuubqbob3 TIMESAVER 137-2HD60 Wide Belt Sander (2) Heads; -- 36" width cap. Drum, [...] Configuration: -- 1st Head: 6" dia. serrated rubber contact drum, 20 HP motor. -- 2nd Head: Adjustable graphite-coated polishing platen with air bag veneer option, 15 HP [...]: -- 37" x 60" Sanding belt size. -- Power bed raise and lower with digital readout. -- 1/4" - 7" Thickness range. -- Electronic variable speed feed 15 - 45 FPM, Feed motor 1 [...] ... more
3
V-belt pulley, pulley Diameter 260 mm Total width 315 mm -12 x belt Belt width 22 mm Recording ø 49 mm Eocnqlkx -1 x belt pulleys available Award pieces Weight 52 kg other pulleys in stock more
5

Belt conveyors Förderschnecke SIL

NS Maastricht, NetherlandsNetherlands dealership location
6337 km
used
Feed screw, stainless steel (3 units) Brand: SIL 1 x 3500 mm length, Ø 280 mm Drive SEW 2.2 kW, 1485/26 RPM. 1 x 2500 mm length, Ø 230 mm Ba2dcjy3es Drive SEW 0.7 kW, 1435/18 RPM. 1 x 2600 mm length, Ø 160 mm Drive SEW 0.12 kW, 900/7 rpm. more
6
Manufacturer BOA Typ PCS 6000 Ndqcb Year of construction 2003 Hours of operation 10,210 h Dimensions separation bed inside 6,000 x 1,765 mm (L x W) Dimensions separating bed outside without motor 6,750 x 2,435 mm (l x w) Drive power 4 kW Transport speed 25 - 67 rpm. Frequency control 25 to 67 Hz Tilt angle 67 ° Number of axles 12 pieces Number of plastic discs per axis 17 to 18 pieces Accessories: 1 piece feeding conveyor to the TCS 6000 1 piece discharge conveyor for the paper 1 piece conveyor... more
4

Wide belt sanding machine Boere BKS 900 / BBBg20/2

Petershagen, GermanyGermany dealership location
6478 km
1991
used
Manufacturer: Boere , Type: BKS 900 / BBBg20/2, Year: 1985 / 1991, Monting of the machine: Walze Schuh + Walze/Schuh/Bürste, Double sided sanding line: yes, Sanding width mm: 900, Sanding hight mm: 150, Number of sanding belts: 4, Continous adjustable feeding speed m/min: 5 - 25, Rubber roller: yes, Shoe unit: yes, Shoe unit: yes, Schleifbänder unten: 2, Brushing unit: yes, Year :1985 / 1991 U2psk more
5

Long belt sander Johannsen T85

Egenhofen / Herrnzell, GermanyGermany dealership location
6816 km
1988
good (used)
Type: T85 Used Machine table size: 2700mm x 800mm 7flsvesg9 ElectricTable stroke clockwise and anticlockwise rotation motor power: 4 kW Year of construction: 1988 location: Warehouse / 82281 Herrnzell more
1
Elect./Voltage: Wth2g GRIZZLY G0486 Wide Belt Sander (2) Heads -- 42" Width cap. Drum, Platen --Head Configuration: --1st Head: - Rubber covered contact roll, 7-7/8" dia. -- 2nd Head: Finishing platen, 2-1/4" width --Specifications: --25 HP motor driving both heads; -- 43" W x 75" L abrasive belts with air-jet tracking. -- Motorized part thickness adjustment with key pad entry and LED readout, 0" - 6" opening; --Infeed & outfeed spring loaded rubber covered hold down rolls --Feed ... more
3
V-belt pulley, pulley Sryww8 Diameter 507 mm Total width 158 mm -8 x belt Belt width 17 mm -Taper bushing, taper bushing, taper-Bush Recording ø 70 mm Balanced pulley Weight 61 kg other pulleys in stock more
5

Belt conveyors Förderband mobil LKOREMAN

NS Maastricht, NetherlandsNetherlands dealership location
6337 km
used
Mobile conveyor belt brand: LKOREMAN Ba2dctkbyt A.A. length = 20000 mm, band width: 650 mm Power consumption: 7.5 kW electric motor and shaft mounted gearboxes. In stock: 2 PCs. more
6
Pos. 30 Ballistic separator Manufacturer Stadler Type BS 2150-06-04-131 Year of manufacture 2007 Use as PPK separator B0b9uev0 Throughput capacity up to 12 t/h Equipped with 6 pcs. oscillating paddle 6,200 mm long Drive power 5,5 kW Dimensions ballistic separator 6,160 x 2,450 x 1,550 mm (l x w x h) Weight approx. 3 t Dimensions steel construction 9,300 x 6,600 x 4,200 mm (l x w x h) Pos. 50 Fine grain belt underneath the ballistic separator Manufacturer Stadler Type sliding belt conveyor Cen... more
15
We offer: Ndjmj 15 conveyor belt conveyors of different manufacturers, sizes and qualities, partly with control for operation/pause in height and angle adjustable, partially fahrlbar on stand with wheels, all band are working properly. 2 3 is replaced the band are as follows. Retail sale possible. 1 conveyor belt conveyors MTF 600x37x up to 150 cm clocked run/pause or controlled by machine in height and angle adjustable, mobile on 3 stand with 4 castors, band is operational. 2. conv... more
6

Long belt sander Johannsen T93

Herrnzell 6, 82281 Egenhofen / Herrnzell, DEGermany
6816 km
1993
good (used)
Type: T95 Used Machine H2kq8ud table size: 2700mm x 800mm ElectricTable stroke clockwise and anticlockwise rotation motor power: 4 kW Year of construction: 1993 location: Warehouse / 82281 Herrnzell more
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Glqkum9ry TIMESAVERS 237-3 HP Wide Belt Sander -- 3-Head, 36" cap. - (2) Contact rolls, and (1) Finishing platen. -- 1st Head: Rubber covered contact roll, 9-1/2" dia., 30 HP motor; -- 2nd Head: Rubber covered contact roll, 30 HP motor. -- 3rd Head: Finishing platen, 2-1/2" width, 20 HP motor; -- 37" x 75" abrasive belts with "POSI-TRAK" electronic tracking. -- Motorized part thickness adjustment with automatic part thickness set-up, mechanical digita... more
3
V-belt pulley, pulley Diameter 322 mm Total width 185 mm -8 x belt Belt width 17 mm Recording ø 90 mm Balanced pulley Psm8ou -2 x pulleys available Award pieces Weight 38 kg other pulleys in stock more


belt shifter
daily

New machines via email!

Stay updated!

to

to

Edit search
BELT SHIFTER
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close