Used Bench router for sale (1,632)

Call

travel distance X-axis: 2,100 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 300 mm, motor power: 9,000 W, Condition: excellent (used), Year of construction: 2019, CNC milling plotter Type: 2130 ATC Year of manufacture: 2019 Condition: functionally tested, very good, used X axis 2100 mm - Y axis 3000 mm - Z axis 300 mm Spindle 9 KW ISO 30 tool holder with automatic tool changing Tool magazine Tool measuring sensor Hybrid material clamping table: - T-slot laths / - vacuum clamping using vacuum Table divided into 6 sections controlled by valves Vacuum pump 250 mbar Material positioning basing pins Mobile control cabinet Additional manual control panel WEIHONG NK105 Automatic central lubrication of the machine Weight 1700 kg The machine is very well maintained Available immediately Bgx3y9xbc0g

more

Listing

Double bench grinder Double bench grinder

Pesaro

1,729 km

Double bench grinder

Double bench grinder Double bench grinder

Call

Condition: excellent (used), Double bench grinder Cug7ebjvty

more

Listing

D - Bayern

1,253 km

Mini Max/SCM Router

€950

Call

Condition: used, Second hand machine Spindle distance 600 mm Spindle speed 9000/18000 rpm vertical spindle stroke 80 mm vertical stroke of the working table 150 mm max. distance table-spindle 180 mm table dimension 960 x 880 mm motor 1,5/2,2 kW Crw2eq0odf Availability: short term Location: Röllbach

more

Listing

Helmbrechts

1,163 km

Milling machine

SAMCO ROUTER

€1,700

Conventional horizontal bench drill

Call

Condition: good (used), Used milling machine Int. art. No. m3458 Manufacturer SAMCO ROUTER type Throat 500 mm Speeds 10.000-20.000 rpm. Power 1.5/2.2 kW Ba3mzsoctb3 Vertical run of the spindle 80 mm Height adjustment of the table 150 mm Weight approx. 210 kg Pneumatic lines are new electrics checked, connection cable new Location: 95233 Helmbrechts The machine can be inspected and tried out with pleasure under power. We will gladly send you more photos by e-mail. A forklift for loading is available. Subject to prior sale. There is the possibility to examine the items for sale, on site expertly. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of manufacture, condition are not binding and were shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with there transfer of risk to the buyer, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is directed only to traders, dealers and legal entities. Company names and trademarks are the property of their owners and serve only to identify and describe the products. The installation and the electrical connection of the machine / the device must be carried out or checked by a trained specialist. See also my other offers. The item MUST be paid for and picked up within 14 days of invoice unless otherwise agreed. Otherwise, the cost of storage will have to be charged.

more

Listing

Zevenbergen

675 km

ReTos Varnsdorf W 100 A

Call

travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 1,250 mm, table load: 3,000 kg, spindle diameter: 100 mm, Condition: used, Year of construction: 1969, ReTos Varnsdorf W 100 A Conventional horizontal bench-type boring mill Overhauled in 2004 X-axis travel 1600 mm Travel Y-axis 1120 mm Z-axis travel 1250 mm W-axis travel 900 mm C-axis (table rotation) 360° Table size 1250 x 1250 mm Table load 3000 kg Burix2oe Spindle taper DIN 250/50 If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Please take a look at our other advertisements to get a complete overview of our stock.

more

Listing

Wiefelstede

785 km

Double bench grinder

Elu MWS 147

€50

Call

Condition: used, Double bench grinder, double grinder, bench grinder, bench grinder -Handover: in current condition as seen -Condition: see photos G7p0938dj -Manufacturer: Elu, double bench grinder type MWS 147 -Grinding discs:. Ø 150 x 20 mm -Motor power: 0.2 kW -Speed: 2900 rpm -Operating voltage: 220 volts -Dimensions: 280/200/H185 mm -Weight: 9.4 kg

more

Listing

Ahaus

779 km

Cutting bench, cutting shear Hydraulic OMAG

MAXION BT 25 ST

Call

Condition: used, Year of construction: 1998, bore capacity in steel (diameter) 25,0 / 30,0 mm throat 260 mm bore stroke 120 mm spindle taper 3 MK table: 390 x 420 mm T-slots 2x B 14.0 mm table height 900 mm turning speeds 80 - 1400 U/min column diameter 110 mm distance spindle /table 220 - 600 mm total power requirement 0,7 / 1,3 kW weight 275 kg range L-W-H 900 x 900 x 1600 mm Machine from a maintenance workshop TABLE DRILLING MACHINE / DRILLING HEAD HEIGHT ADJUSTABLE WITH CONSTANT TABLE HEIGHT Furnishing: Cauwqcjw - pole-changing motor - Continuous speed adjustment including analogue speed display - Spindle feed manually via cross handle - Drill head height adjustable, via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Front main switch - Machine base including coolant system - Operation manual * Machine link: ?machineno=1008-9093640

more

Listing

Wijchen

(dealership location)

725 km

OMAG CE 206 S, 2000x6mm

Call

Condition: used, Cutting bench, cutting shear Type: Hydraulic Manufacturer: OMAG Type:&nbsp CE 206 S Cutting width: 2000mm Max. thickness:&nbsp 6mm Electrical backgauge Os9inmxw Machine-dimensions: 2400x1900x1600mm Machine-weight: 4000kg

more

Listing

Witten

838 km

ERLO FT6

Call

Condition: new, Year of construction: 2021, bore capacity in steel (diameter) 12 mm throat 220 mm bore stroke 60 mm Bih7o0logog thread capacity 6 M column diameter 70 mm bore spindle turning speed range 120-6000 U/min table-size 300x250 mm

more

Listing

Gütersloh

869 km

Copy router

Rinaldi Copia 380 S

€7,200

Call

Condition: used, Year of construction: 2010, Rotatable support table between 0° and 180° with locking points, allowing 3-sided processing in one clamping 2idkcxvu Infinitely variable speed adjustment with digital display can be preselected between 3,000 and 13,000 revolutions per minute, meaning that both steel and aluminum profiles can be processed 4 pneumatically controllable copy pens at the stop Pneumatically controllable copy pen on the template Pneumatic material clamping Minimum quantity spray device Weight: about 600 kg

more

Listing

Almelo

738 km

Thickness bench | planer

Disber RC630NV

€9,800

press brake; folding bench; press brake

Call

Condition: new, Year of construction: 2022, Functionality: fully functional, AUTOMATIC THICKNESSER RC-530NV REF-11306 - Max. Working width: 630mm - Motor Power 10Hp - Feeding speed: Variable 4-16 m/min 7dxmmwfouj - Automatic rise and fall: With positioner - Rise and fall motor power: 1/3 HP - Min/max thickness: 5 - 300mm - Motor power: 10Hp - Max. Cutting capacity: 8mm - Feeding motor power: 3/4 HP -Table dimensions: 630x1050mm - Machine dimensions : 1100x1200x1300mm - Weight: 850 Kg

more

Listing

Moers

799 km

Alpmac B320-4100

Call

Condition: new, Year of construction: 2023, Discover our press brake that offers the highest performance and efficiency thanks to the latest technology and innovative design. We are proud to offer you a high-quality machine designed for reliability and precision. Precision is one of our most important values, and our press brake offers unmatched results. Each bending operation is performed with exceptional accuracy, resulting in perfect results and remarkable production quality. Our machine is capable of producing even the most complex parts with unparalleled precision. As far as durability is concerned, we rely on high-quality materials and first-class workmanship. Our die bending press is built to last, providing reliable performance for many years to come. With minimal maintenance and high resistance to wear and tear, it is an investment that will pay off in the long run. What's more, our customer service is unbeatable. We are at your side throughout the machine's lifecycle, providing comprehensive support, training and fast response times. Our dedicated team of experts is always ready to assist you with any questions, problems or maintenance requirements. We place great emphasis on customer satisfaction and ensure that you can rely on us. Overall, our press brake is the best choice for companies looking for precision, durability and outstanding service. It is in a class of its own and will exceed your expectations. Invest in our press brake and experience the top performance your business needs. Pressing force: 320 tons Bending length: 4100 mm column passage: 3600 mm installation height: 480 mm throat: 400 mm cylinder stroke: 265 mm rapid speed of the press beam: 110 mm/sec return speed of the press beam: 110 mm/sec Uzao2q9 Working speed: 1-10 mm/sec X axes travel: 750 mm Backgauge speed: 350 mm/sec R axis: Motor controlled Finger protection: AKAS laser Backgauge protection: Light barrier category 4 Oil quantity: 290 liters Machine dimensions: Width: 2100 mm height: 3000 mm Connected load: 30 kW Control system: Delem DA-58T Weight: approx. 18 tons Crowning: WILA automatic crowning system Tool holder: Rolleri type R1 Standard tool: Upper tool segmented, hardened, ground H66,6mm 835mm Lower tool 60 X 60 4V segmented, hardened, ground 835mm "

more

Listing

Ahaus

779 km

Cutting bench, cutting shear Hydraulic Jean

BERNARDO BM 25 T - 400

Call

Condition: new, bore capacity in steel (diameter) 25,0 mm throat 180 mm bore stroke 80,0 mm morse taper 2 MK turning speeds 180 - 2270 U/min table-size 305 x 305 mm swivelling +/- 45 Grad T-slots 16,0 mm column diameter 72,0 mm voltage 400 V total power requirement 1,1 kW weight 57,0 kg range L-W-H 400 x 630 x 990 mm scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 Beob7ceumw - Digital quill stroke display - machine light - Right-left rotation - protective cover - Height-adjustable protective cover - T-nuts - operating tool

more

Listing

Wijchen

(dealership location)

725 km

Jean Perrot PH 2016, 2000x16mm

Call

Condition: used, Cutting bench, cutting shear Type: Hydraulic Manufacturer: Jean Perrot Type:&nbsp PH 2016 Cutting width:&nbsp 2000mm Max. Thickness:&nbsp 16mm Electrical back-gauge Throat: 500mm Motor-power: 30kW Machine-dimensions:&nbsp 2720x2350x2120mm Hspu8ug8sv Machine-weight: 13500kg

more

Listing

Borken

(dealership location)

785 km

Bench testing machine up to 2.5 kN

Zwick BZ2.5/TN1S

€6,823

Call

Condition: excellent (used), Here we offer you a Zwick table-top tensile testing machine tensile strength measuring machine. Field of application : Wide range of applications, from plastics and Elastomer testing over paper, textile, foam and Wire to component testing. Load frame: Max. Test force FN in tension/compression direction 2.5 kN Height (h1) approx. 770 mm Width with electronic unit 320 mm Depth with electronic unit 414 mm Height of the working area hmin ... hmax: Travel crosshead angle mounted upwards 227 ... 573 mm Travel crosshead angle mounted turned by 180° 57 ... 403 mm (each without connecting bolts) Connected loads: Electrical connection 115/230 V 4/2A-1PH/PE/N Power consumption 0.4 kVA Mains frequency 50/60 Hz 2.5kN N3qln Type: BZ2.5/TN1S condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

more

Listing

Nevers

(dealership location)

1,044 km

GUILLIET

€2,800

Tensile and compression force test bench

Call

Condition: ready for operation (used), Technical characteristics Shaft 50 mm Long 170 mm 4 speeds 3000/4500/6000/9000 rpm Ou07eqak Aluminium lip Adjustable guide Engine 5.5 hp Manual raising/lowering Power and Motors Overall dimensions

more

Listing

Borken

777 km

Zwick Roell

€14,280

Call

Condition: excellent (used), Testing device for measuring tensile and compressive forces up to 100 kN Manufacturer: Zwick Type: 81120 Materials testing machine Tensile and compressive forces up to 100 kN Cards & Modules: Zwick ZPS 7095.1 Control card Sieb & Meyer AC servo 26.39.2 AC servo module Byfqbnad Dimensions: Height: 3200 mm Width: 1120 mm Depth: 620 mm Measuring device cabinet with accessories and attachments Dimensions: Height: 1900 mm Width: 1190 mm Depth: 635 mm You can find more new and used items in our store! International shipping costs on request!

more

Listing

Vitry-sur-Seine

834 km

tilting spindle router

SCM Class TI 120

€4,500

Cutting bench, cutting shear 4000x6,5mm Hydraulic

Call

Condition: excellent (used), Machine number: AB00003904, Functionality: fully functional, Machine in perfect working order L0how3w0d7

more

Listing

Korschenbroich

(dealership location)

814 km

Planing bench

UNBEKANNT A 2.2

Call

Condition: used, Year of construction: 1980, Length 63 mm Width 220 mm 3hno3jh Weight 120 kg 2

more

Listing

Wijchen

(dealership location)

725 km

Beyeler VR 4000x6,5

Call

Condition: used, Year of construction: 1995, Cutting bench, cutting shear Type: Hydraulic Manufacturer: Beyeler Type: VR 4000x6,5 Year: 1995 Control: Cybelec DNC 10 Max.&nbsp working width: 4080mm Max.&nbsp thickness: 6,5mm Bd99pz8xhky Electrical back-gauge: 5-1000mm Angle-adjustment: 0,3-1,54gr Motor-power: 11kW Machine-dimensions: 4720x3060x1880mm Machine-weight: 10500mm

more

Listing

Borken

785 km

Burst test bench

Lindner AGB Berstprüfstand TMM4

€23,000

Call

Condition: excellent (used), Lindner Bursting Test Stand Here we offer a Lindner burst test stand. AGB Bursting Test Stand TMM4 Technical data: Hsmw33uwx AGB Bursting Test Stand TMM4 Year of manufacture 2015 Rated voltage: 3/N/PE AC 400V Rated power: 5,5 kW Temperature range chamber: RT ... 180°C Temperature range medium: RT ... 135°C Pressure range: 0 ... 5 bar Compressed air supply: 6-8 bar Test medium: glycol / water Heat transfer oil Fragoltherm Q-HTF Dimensions: length 2150 mm x width 1050 mm x 2160 mm Operating voltage: 3/N/PE AC 400V +/-10% 50Hz power: 5,5kW rated current: 8A Back-up fuse: 16A Control voltage: 24VDC PLC system: S7-1215 DC/DC/RLY For the commissioning of the burst test bench the following items are necessary: Pump, cooling tower & fire alarm panel these are not supplied. Type: AGB burst test rig TMM4 weight approx. 705 kg Condition: used / used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

more

Listing

Nevers

(dealership location)

1,044 km

SCM T120C

€2,700

Call

Condition: ready for operation (used), Technical characteristics Cast iron table 1050 x 950 mm Feeder 3 rollers : 3 ; 5 ; 7,5 ; 10 ; 21 m/min Rotating guide ELBE Bd3wak3yh8 Rolling table 5,5 hp motor Shaft diameter : 50 mm Power and Motors Pluging: Three-phased Overall dimensions

more

Listing

Witten

838 km

ERLO FT6

Call

Condition: new, Year of construction: 2021, bore capacity in steel (diameter) 12 mm throat 220 mm bore stroke 60 mm thread capacity 6 M Cbsozeuryu column diameter 70 mm bore spindle turning speed range 120-6000 U/min table-size 300x250 mm

more

Listing

Babberich

740 km

bench drill

TOS VARNSDORF WHN 13 CNC

Call

travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,000 mm, table load: 12,000 kg, spindle diameter: 130 mm, spindle speed (min.): 3,300 rpm, Condition: good (used), Year of construction: 2006, Manufacturer: TOS VARNSDORF Type: WHN13CNC Control: HeidenHain iTNC530 Ca7v0pmh88 Year of construction: 2006 Extended X travel to 5000 mm Extended Y travel to 3000 mm Coolant system HeidenHain HR410 Handwheel HYTOS Lubrication in X/Y/Z/B Axis Optional TOS HUR50 Universal milling head Optional tooling package Specifications Metric US Standard X - axis 5000 mm Y - axis 3000 mm Z - axis 2000 mm W - axis 800 mm Table length 2200 mm Table width 1800 mm Table load 12000 Table speed 5000 rpm Power output 37 kW Tool holder 50 ISO/Bt/Mk Feed X - axis 8000 mm/min. Feed Y - axis 10000 mm/min. Feed Z-axis 10000 mm/min. Feed W-axis 10000 mm/min. Number of controlled axes 5 Dimensions (estimate) length 8650 mm width 7800 mm height 5800 mm weight 42000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

more

Listing

Gütersloh

869 km

bench drill

AEG 13 mm

€700

Cutting bench, cutting shear 3150x4mm Hydraulisch

Call

Condition: used, Drilling capacity 13 mm Tool holder: MT 2 4 different engine speeds Cbpnijzp

more

Listing

Wijchen

(dealership location)

725 km

RAS 85.30, 3150x4mm

Call

Condition: used, Cutting bench, cutting shear Type: Hydraulic Manufacturer:&nbsp RAS Type:&nbsp 85.30 Cutting width: 3150mm Cutting thickness:&nbsp 4mm Ckfdmx82ck Automatic electric backgauge Motor-power: 7,5kW Incl 2 set of extra cutting-knives + container

more

Listing

Borken

785 km

Leak test bench

KSE

Call

Condition: excellent (used), KSE Leak Test Bench Here we offer a KSE leak test bench. Test bench for automotive Testing of electric drives Isolatio/Tightness E-Motors Supply voltage: 400 VAC Control voltage: 24 VDC Connected load: 0,75 kW Type: KSE I/SB-3 Condition: used / used Gzkvrc Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

more

Listing

Nevers

(dealership location)

1,044 km

Heavy router

MARTIN T20

€10,000

Call

Condition: ready for operation (used), Technical characteristics Table 850 x 1125 mm Shaft 50 mm Height 150 mm Tools Ø max 250 mm Interchangeable chuck Motorized spindle height with digital display in absolute and relative dimensions Speed 3000/6000 and 4500/9000 rpm Motor 7.5 kW Protective cover with lip adjustment Input/output on SIKO counter Power and Motors B30pwt87 Pluging: Three-phased Overall dimensions Weight: 900 Kg

more

Listing

Gütersloh

869 km

Copy router

Elumatec AS 170

€3,200

Cutting bench, cutting shear Hydraulic Safan HVS

Call

Condition: used, Year of construction: 1993, Speed: 12,000 revolutions per minute Pneumatic material clamping Minimum quantity spray device Milling area: 300 x 120 mm Stroke: 115mm Weight: about 200 kg D7qzv30

more

Listing

Wijchen

(dealership location)

725 km

Safan HVS 310-13/16

Call

Condition: used, Year of construction: 1987, Cutting bench, cutting shear Type: Hydraulic Manufacturer:&nbsp Safan Type: HVS 310-13/16 Cutting width: 3100mm Cutting thickness: 16mm Electric Back gauge Rh3vt Including documentation

more

Listing

Nevers

(dealership location)

1,044 km

CHAMBON T325

€6,500

Cutting bench, cutting shear 3050x3mm Hydraulic

Call

Condition: ready for operation (used), Technical characteristics Long table Motor 5.5 hp Shaft 50 mm Table lenght 2200 mm Max Ø in the table 220 mm Max Ø in the fence 240 mm Front extension of the table 4 speeds of rotation 3000/4500/6000/8000 Manual raising/lowering Dmeq9p Spindle locking and clamping of the shaft on the front Drive with 3 variator blades Ideal for carpentry Power and Motors Overall dimensions Weight: 900 Kg

more

Listing

Wijchen

(dealership location)

725 km

WILA Safan HS 305-3

Call

Condition: used, Year of construction: 1969, Cutting bench, cutting shear Bbu2qdzuow Type: Hydraulic Manufacturer: WILA, Safan Type: HS 305-3 Cutting width: 3050mm Cutting thickness: 3mm Electric Back gauge: 1000mm Machine-dimensions: 3650x2200x1500mm

more

Listing

Nevers

(dealership location)

1,044 km

Heavy router

MARTIN T20

€16,000

Cutting bench, cutting shear 3000x6mm Hydraulic

Call

Condition: ready for operation (used), Technical characteristics Ntkaezhs Long table with front extension Interchangeable shaft Ø 50 mm 2 speed motor 7.5 HP Rotation speed 3000/4500/6000/9000 rpm Reverse rotation Electric raising/lowering Digital display of absolute and relative dimensions 3 rollers / 4 speed drive Top of the range machine Heavy frame Ideal for carpentry and cabinet making Power and Motors Overall dimensions Weight: 1300 Kg

more

Listing

Wijchen

(dealership location)

725 km

Darley GS 3006

Call

Condition: used, Year of construction: 1976, Cutting bench, cutting shear Type: Hydraulic Manufacturer:&nbsp Darley Type: GS 3006 Cutting width: 3000mm Cutting thickness: 6mm Electric Back gauge Jh9xwt Including 2 sets of extra blades Machine-dimensions: 3600x2300x1700mm

more

Listing

Nevers

(dealership location)

1,044 km

SFL1000M

€5,500

Cutting bench, cutting shear Hydraulic Jean

Call

Condition: ready for operation (used), Technical characteristics Itqmcwc9j Table 2500 mm with front extension Shaft 50 mm long 170 mm Max Ø of the tools 200 mm Height control panel Electric lift/lower Aluminium guide 3 speeds 3500/6500/8000 rpm Ideal for carpentry Power and Motors Overall dimensions

more

Listing

Wijchen

(dealership location)

725 km

Jean Perrot CSE 3G 6006

Call

Condition: used, Year of construction: 2007, Cutting bench, cutting shear Type: Hydraulic Manufacturer: Jean Perrot Type:&nbsp CSE 3G 6006 Year: 2007 CNC: SEW DOP11A Cutting width: 6050mm Max. Thickness: 6mm Electrical back-gauge Motor-power: 15kW Dl9ind Machine-dimensions for transport: 7400x2450x2250mm Machine-weight: 19000kg

more

Listing

Nevers

(dealership location)

1,044 km

UTIS TS50

€12,000

Cutting bench, cutting shear Hydraulic Ursviken

Call

Condition: ready for operation (used), Technical characteristics Control panel Digital adjustment of spindle, fence and speed Shaft height and motorized fence Speed 1500 to 9000 RPM (variable speed drive) Shaft diameter : 50 mm Shaft length : 170 mm Quick tool change (hydraulic) Infeed-outfeed adjustable steel fence Front extension Quick table opening Juxz8hqn9v Motorized drive support 4-roller drive (4 speeds) Top-of-the-range machine Ideal for joinery, windows and cabinetmaking Power and Motors Voltage: 400 V Pluging: Three-phased Power: 7,5 Kw Overall dimensions

more

Listing

Wijchen

(dealership location)

725 km

Ursviken GSD 2550x5mm

Call

Condition: used, Cutting bench, cutting shear E2ldixy Type: Hydraulic Manufacturer: Ursviken (Sweden) Type:&nbsp GSD 2550x5mm Cutting width: 2550mm Max. thickness:&nbsp 5mm Manual back-gauge: 750mm Machine-dimensions: 2800x1600x1900mm

more

Listing

Nevers

(dealership location)

1,044 km

GUILLIET QFB

€2,300

Cutting bench, cutting shear 3050x6mm Hydraulic

Call

Condition: ready for operation (used), Technical characteristics SPANEX variable speed trainer Largeur table700 mm Longueur table1100 mm Dmeran Diamètre arbre50 mm Nombre de vitesses4 Power and Motors Motor: 5.5 CV Overall dimensions

more

Listing

Wijchen

(dealership location)

725 km

HACO TS 3006, 3050x6mm

Call

Condition: used, Year of construction: 1992, Cutting bench, cutting shear Type: Hydraulic Manufacturer:&nbsp HACO Type:&nbsp TS 3006 Cutting width: 3050mm Cutting thickness: 6mm Electric Back gauge: 750mm With Safety-sensors Jyvm3i Machine-dimensions: 3650x2200x1550mm

more

Listing

Nevers

(dealership location)

1,044 km

Tenoning router

PIERRE BENITE

€1,800

Cutting bench, cutting shear 3000x12mm Hydraulic

Call

Condition: ready for operation (used), Technical characteristics Shaft 50 mm Length 200 mm Cast iron frame Table 800 mm Lateral tenoning carriage Max. workpiece width 400 mm Presser Max. tool Ø 250 mm 3 speeds Power and Motors Cuy8z0o7we Voltage: 380 V Motor: 5 CV Overall dimensions

more

Listing

Wijchen

(dealership location)

725 km

HACO, Kingsland K TS 3012

Call

Condition: used, Year of construction: 2002, Cutting bench, cutting shear Type: Hydraulic Manufacturer:&nbsp HACO, Kingsland Type:&nbsp K TS 3012 Control: Robosoft SP8&nbsp Cutting width: 3000mm Max. thickness: 12mm Electric&nbsp backgauge: 1000mm Motorpower: 22,5kW Wsslohtr With safety-sensors SP8&nbsp Control offers the following functions: - backgauge position pre-selection - digital readout of the back gauge position - cutting length control - backgauge retraction selection. - Electro-hydraulic cutting angle adjustment with digital readout from the control panel. - Fast manual blade gap adjustment. - Motorized back gauge controlled&nbsp Machine-dimensions: 4200x2100x2400mm

more

Listing

Nevers

(dealership location)

1,044 km

Heavy router

UTIS T50

€7,000

Cutting bench, cutting shear 2550x4mm Hydraulic

Call

Condition: ready for operation (used), Technical characteristics With new 3-roller 4-speed drive Electric control for spindle and guide adjustment and speed adjustment Digital and programmable display Steel guide with strips for continuous guidance Shaft 200 mm bore 50 mm Ø 300 max in the guide and in the table Bgchtvzttxm Ideal for carpentry, very nice machine Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions

more

Listing

Wijchen

(dealership location)

725 km

Safan VS 255-4

Call

Condition: used, Year of construction: 1988, Cutting bench, cutting shear Type: Hydraulic Manufacturer:&nbsp Safan Type: VS 255-4 Cutting width: 2550mm 877mrwginn Cutting thickness: 4mm Manual&nbsp Back gauge Machine-dimensions: 3150x1380x1900mm (without Arms)

more

Listing

Nevers

(dealership location)

1,044 km

SCM T120C

€3,100

Call

Condition: ready for operation (used), Technical characteristics Cast iron table 1050 x 950 mm Rotating guide 5,5 hp motor Shaft diameter : 50 mm Power and Motors Bgchsae99g0 Pluging: Three-phased Overall dimensions

more

Listing

Nevers

(dealership location)

1,044 km

UTIS T150

€2,800

Call

Condition: ready for operation (used), Technical characteristics square table B9t3xlp2 manual rise / fall heavy and quality machine adjustable lip guide 3-roller drive and support Longueur table180 mm Diamètre arbre50 mm Power and Motors Overall dimensions

more

Listing

Nevers

(dealership location)

1,044 km

Router with feeder

SCM T120C

€3,100

Call

Condition: ready for operation (used), Technical characteristics Cast iron table 1050 x 950 mm Feeder 3 rollers : 3 ; 5 ; 7,5 ; 10 ; 21 m/min Rotating guide ELBE Rolling table 5,5 hp motor Shaft diameter : 50 mm Power and Motors Pluging: Three-phased Overall dimensions Bgchvumkrab

more

Listing

Nevers

(dealership location)

1,044 km

SCM FLEX 2

€6,000

Call

Condition: ready for operation (used), Technical characteristics Glazing bead profiling, cutting and recovery unit Guide outlet lips with rebate compensation Table length : 2500 mm Programmable electric spindle up/down Max. tool height : 270 mm Spindle stroke : 210 mm Bore 50 mm Nqqtebwu Motor : 7.5 hp 4 speeds : 3200; 5000; 6500 and 10000 rpm 6-roller drive, 4 speeds, integrated jib crane Ideal for joinery, profiling and special machining Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions Lenght: 2600 mm Width: 1100 mm Height: 1700 mm Weight: 700 Kg

more

Listing

Nevers

(dealership location)

1,044 km

SCM T130 PLL

€5,500

Call

Condition: ready for operation (used), Technical characteristics Height control panel Digital adjustment of spindle height, fence, speed Cast iron table 2600 x 410 mm Spindle bore 50 mm, length 260 mm Max. tool diameter: 250 mm Motor 5,5 kW Speed of rotation : 3000 ; 4500 ; 6000 ; 7000 and 1000 rpm 3 rollers drive : 4 ; 8 ; 10 ; 20 m/min Alu guide lips Juxxe0pwox Power and Motors Voltage: 380 V Pluging: Three-phased Power: 3 Kw Overall dimensions

more

Listing

Nevers

(dealership location)

1,044 km

GUILLIET QFD

€3,600