Folding machines (motor-driven) 2000-2999mm for sale
1
1 Press brake COLLY - PS 63/25 equipped with laser of 2007 PROBLEM Numerical control
Year 1992
PS 63/25
Guvvvmr
backgauge (mm)600
Max. bending power 63 Tons
Maximum bending length 2500mm
Distance between uprights 2120mm
Gooseneck depth 250mm
Working height 900mm
Max. distance between table and ram 360mm
Slide travel (Y1 / Y27mm to 150mm)
Approach speed (mm /s)10mm
Working speed 7mm
Return speed10mm
Width of table80mm
Overall length 3000mm Width 1200mm Height 220mm Weight 4450 kg
1
sheet width 2020 mm
plate thickness 1,5 mm
distance between columns -- mm
bending angle max. +/- 135 °
hollow max. 100 mm
total power requirement 0,55 / 1,0 kW
weight of the machine ca. 1,0 t
dimensions of the machine ca. 2,68 x 0,64 x 1,1 m
Heavy version with motorized drive for the upper and bending beam and
segmented upper beam.
- Foot control enables the sheet metal to be positioned with both hands
- The workpiece is clamped and bent using a motorized chain drive
Bdh3ssqy
- Setting the b...
Max. Bending length: 2040 mm Max. Sheet thickness: 2.5 mm steel Manual and automatic bending mode possible Bending angle adjustment via potentiometer Bending rail ground Weight: approx. 1500 kg
Bw0uhoqjkg
8
sheet width 2040 mm
plate thickness 2,5 mm
daylight opening 200 mm
adjustment UW 30,0 mm
bending speed 32 Grad/sec
bending angle max. 0-180 °
work height max. 900 mm
engine output 2,6 kW
weight 1420 kg
range L-W-H 2800 x 1200 x 1400 mm
Bzivoqo7zp
Furnishing:
- motorized swivel bending machine
- Bending angle adjustment via electr. Potentiometer
- manual lower beam adjustment
- Manual / automatic operation selectable
- Replacement bending rails
- 2x double foot switch
10
Hydraulic swivel bending machine
Fab. FASTI Typ. FP60 25-6
Very good condition, year 2008
Technical data
Make: Fasti Schroeder
Type: FP60 - 25- 6
Year of manufacture: 2008
working length: 2540 mm
Power: 6 mm
Pnlfd
upper beam stroke: 500 mm
bending beam adjustment: 80 mm
dimensions: approx. L 4,7 x W 3,4 x height 2,5 m
Weight: approx. 8 t
Equipment
- Motorized bending beam adjustment
- Hydraulic upper tool clamping
- Motorized bending center adjustment
- CNC controlled crowning
- CFP 120 touch sc...
sheet width 2040 mm
plate thickness 3 mm
daylight upper clamping 350 mm
bending angle max. 0-135 °
adjustment of lower and bend clamping 80 mm
control Fastimatic M200
power requirement 2,2/1,5 kW
weight of the machine ca. 2460 kg
dimensions of the machine ca. 3,2 x 2,8 x 2,1 m
Condition: ready for operation
Condition: very good
CE signed
Electric 400 Volt
CNC-control with screen
Mot. back gauge 1000 mm
Foot switch
Motorized machine with motorized bending beam adjustment for setti...
5
hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl.
hydraulically dynamic camber, touchscreen,
pressure regulation of the upper beam, mot. backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam
-images similar-
Bryyba9q
5
sheet width 2000 mm
plate thickness 3,5 mm
distance between columns 2150 mm
Bza3exlua8
total power requirement kW
weight of the machine ca. 2 t
dimensions of machine L x W x H 2,9 x 0,9 x 1,44 m
Accessories: back gauge, various tool segments
3
.
Technical data :
Csi7sffc
.
working length 2020 mm
max. sheet thickness at 400N/mm² 2,0 mm
Stroke upper beam 120 mm
.
Dimensions , W x D approx. 2,9 x 0,7 m (measured without width stop)
.
Motors : bending / lifting upper beam 0,55 / 0,75 kw
Weight approx. 1,6 to
.
Width stop / back stop, manual 750 mm
.
.
8
sheet width 2520 mm
plate thickness 3,0 mm
stroke of upper beam 250 mm
adjustment UW 80,0 mm
total power requirement 6,0 kW
weight 3160 kg
range L-W-H 3685 x 1220 x 1425 mm
Furnishing:
- electric folding machine
Bxan7odubi
- Bending angle preselection via electrical potentiometer
- powerful drive motors
- manual lower beam adjustment
- Double foot switch
- Operation manual
* Machinevideo :
?v=tOV5FsFKD-0
8
Hydraulic swivel bending machine
Fab. RAS Typ. 74.25 2500 x 4,5mm
condition very good, year of construction approx. 1985
technical data
Make: RAS
Type: 74.25
Year of construction: approx. 1985
useful length: 2540 mm
plate thickness: 4,5 mm
upper cheek stroke: 400 mm
lower cheek stroke: 80 mm
bending angle: 0 - 180
dimensions: approx. L 3900 x 2100 x 2500mm
Pp9zr
Weight: approx. 5 t
Equipment:
- CNC-controlled back gauge 10 - 1000mm
(+200mm with back gauge)
- Elgo-control for the backgauge
-...
6
Article number: MA1058
Bdknwcsacy
Manufacturer: Fasti
Type: vertical bending machine
Year of construction: 2001
Machine number: 00726004
Bending length [mm]: 3000
Control: Delem DZ-65 - VA3D
Length [mm]: 5350
Width [mm]: 2300
Height [mm]: 2200
Weight [kg]: 6510
Power supply: 380V / 17 KW
Usable height [mm]: 250
Maximum sheet thickness [mm]: 4
Table size Lxw: Backgauge 1500 CNC controlled
Accessories: manual / schematics
2
Dimensions LxWxH: 3.0x0.56x1.3 m
Net weight: 1450 kg
Max. working width: 2020 mm
Bwgean9nmj
max. sheet thickness: 2.5 mm
TECHNICAL SPECIFICATIONS king width 2020 mm et thickness in steel at 400N / sqmm 2.5 mm Dimensions LxWxH approx. 3.0 x 0.56 x 1.3 m Weight 1450 kg A detailed description with technical data and a picture can be found in the attached PDF file
2
Hydraulic bending machines Fabr. STROJÁRNE - PIESOK type XONM 2000/2A - 2
Masch.# 237-516-1978, built in 1978
Technical data:
Working length 2050 mm
maximum sheet thickness 2.0 mm
turn to 135°
Bending time 3.5 sec.
Stroke 250 mm of the upper cheek
Stroke 100 mm the lower beam
Stroke 100 mm of the beam
Transmission-2,2 kW
Bdu8cmhexp
Weight 2800 kg
External dimensions approx. 3000 x 800 x 1600 mm
with
-separately standing hydraulic
-adjustable bending angle
used, in good condition
5
sheet width:2040 mm
plate thickness:1,2 mm
total power requirement:2,5 kW
Y7k3nu8ny
weight of the machine ca.:2,0 t
dimensions of the machine ca.:3,0 x 1,6 x 1,7 m
10
sheet width 2540 mm
plate thickness 3,0 mm
stroke of upper beam 200 mm
adjustment UW 80 mm
Angle 0 - 180 Grad
Control MULTIBEND
total power requirement 3,5 kW
weight 3.250 kg
range L-W-H 3685 x 1220 x 1425 mm
2tfyim
** General overhaul in 2015 for ~ 20,000 euros
Furnishing:
- electric folding machine
- with RAS MULTIBEND control model 2000
- electrical backgauge
- rear sheet metal support surface
- powerful drive motors
- manual lower beam adjustment
- Double foot switch
- Operation manual
Motorized swivel bending machine
Fab. SCHRÖDER Typ. MAK4 2000/6,0
Very good condition, year 1999
Technical data
Make: SCHRÖDER
Model: MAK 4
Year of manufacture: 1999
Power: 6 mm
working length: 2020 mm
upper beam stroke: 350 mm
Motor upper beam: 4,0 kW
motor bending beam: 5,5 kW
dimensions: approx. L 3,70 x W 2,50 x H 2,20 m
Weight: approx. 7t
Equipment
- Positioning control POS 500
(12-fold program with LCD display)
- Motorized bending beam adjustment
- Controlled back gauge with ball roll...
2
bending length: 2050bending angle (max.): 135stroke: 160weight approx.: 3500messurements (LxWxH): 3250/2500/2100Aluminium: 4Steel: 3Stainlesssteel: 2motor power: 3/1,5/0,4STANDARD ACCESSORIES
AC motorized drive of folding and clamping (Y,Z axis)
Servo motorized drive of back gauge (X axis)
Ballscrew spindle system with dual motor drives on clamping and folding
15.6’’ touchscreen controller on swivel arm with ERFOLD BASIC cnc line by line software
Clamping beam opening height 1...
2
max. working width: 2040 mm
for metal sheets up to: 2 mm
Be9b3ajon8
opening width top clamping bar: 90 mm
adjustment bending cheek: 90 mm
clamping bar drive: 1,5 kW
below cheek drive: 4 kW
electrical connection: 380 V kW
weight: 2600 kg
space needed: 3050 x 800 x 1350 mm
2
Motor-driven folding machines Fabr. KRAMER type AMaut II.
Masch.#. 45858, built 1985
Technical data:
Atbeitslaenge 2025 mm
maximum sheet thickness 2.25 mm
KL. The bug width 5 x s
KL. Inner radius 1.5 - 2 x s
Adjustment of sub - and bending flange 90 mm
for round bending 90 mm
highest working position of the upper beam 190 mm
Gr. Opening of the upper beam 290 mm
Power 3,0 / 1,1 kW
Duration of a workflow 7.0 seconds.
Weight approx. 2450 kg
Djjk2pb
External dimensions approx. 3000 x 1000 x 1650 mm...
5
RAS Turbo bend plus 62.25
Bending length 2540mm / 2.5 metre
Material thickness max 2.5mm
Four extremely dynamic and fast ramp-driven movements under CNC
System 6000 CNC touch screen – New control fitted in 2016
Extended back supports
Light guards
Portable tooling rack
New / Year of manufacture 2007
Complete with:
J shape back gauge
Complete with segmented and straight tools and tooling rack
Tooling (supplied with the machine):
Standard ‘sharp’ upper tooling – 3x lengths 845mm
Bottom tooli...
6
Schröder MAKV 2000/2,5 swivel bending machine
power 2,5 mm steel plate Alu 4,0 mm VA 1,5 mm
with foot switch and back gauge 750 mm
upper cheek stroke 250 mm
Gxwhj8
11
Make: OZAMECH / QUINTO, Origin Poland
Model: KM 4/2000
Built: 1999 / first commissioning 2001!
Bend length 2000 mm
max. sheet thickness at 400 N/mm2 4 mm
Adjustment range of the upper cheek 200 mm
dito of the bending cheek 60 mm
Rotation alder of bending beam 0 - 135°
Speed of bending beam 0.5 wheel/s
Speed of the superbeam 4.4 mm/s
Time for a 90° cantilever 10 s
Drive power, upper beam 1.5 kW
dito, bending beams 4 kW
Dimensions L x W x H 3410 x 900 x 1400 mm
Weight 3900 kg
Accessories / Speci...
2
bending length: 2050bending angle (max.): 135stroke: 160weight approx.: 3500messurements (LxWxH): 3250/2500/2100Aluminium: 4Steel: 3Stainlesssteel: 2motor power: 3/1,5/0,4STANDARD ACCESSORIES
AC motorized drive of folding and clamping (Y,Z axis)
Servo motorized drive of back gauge (X axis)
Ballscrew spindle system with dual motor drives on clamping and folding
15.6’’ touchscreen controller on swivel arm with ERFOLD BASIC cnc line by line software
Clamping beam opening height 1...
4
max. working width: 2040 mm
for metal sheets up to: 4,5 mm
opening width top clamping bar: 320 mm
Bjr9dflpeu
adjustment bending cheek: 120 mm
clamping bar drive: 2,2 kW
below cheek drive: 2,2 kW
electrical connection: 5 kW
weight: 3700 kg
space needed: 3250 x 1000 x 1900 mm
9
Motorized swivel bending machine make LOTZE type HZK 25 2500/3Masch.# 1827 year of construction 1956 technical data:max. working length2540 mmmax. sheet thickness3,0 mmkl. inner bending radius4,0 mmgr. Upper beam opening width300 mmBending beam opening width40 mmWorking height800 mmDrive power 3.5 / 2.2 kWDimensions4200 x 1400 x 1600 mmWeight approx.3.75 twith manual lever gearbox for opening and closing, bending and return movement Used, in good condition
Cuknt0zo
3
Used 6metre Ras up and down bend cnc folding machine for sale
Ras XXL Centre 75.06
System 9002 cnc control
RAS TECHNICAL DATA:
DIMENSION 75.06
Max. Sheet thickness (Steel 58000 PSI) gauge 16
Max. sheet thickness (Aluminium 29000 PSI) gauge >14
Max. sheet thickness (Stainless Steel
109000 PSI) gauge 18
Working length max. inch 251,97 / 6.4metre
Btk9dif93y
Grippers Travel Range inch 0,47 – 29,53
Grippers Positioning Accuracy inch ...
5
Motorized swivel bending machine
Fab. SCHRÖDER Typ. MAKV 2000x2
very good condition, year 1992
F30robr
Technical Data
Make: SCHRÖDER
Type: MAKV 2000/2
year of construction: 1992
useful length: 2020 mm
sheet thickness: 2 mm
opening width: 120 mm
Countersinking of bending beam 30 mm
dimensions: approx. L 3,10 x W 1,30 x H 1,40 m
Weight: approx. 1600kg
Equipment:
- Sharpening rail 30° + 45
- Bending rail 10mm, 25mm
- Manual back gauge
- 6-fold preselection of bending angle via potentiometer
- Inst...
11
bending length 2020 mm
max. sheet thickness at 400 N/mm² 4 mm
adjustment range of the upper beam 200 mm
ditto of the bending beam 60 mm
Rotation range of the bending beam 0 - 135
Speed of the bending beam 0,5 rad/s
Speed of the upper beam 4,4 mm/s
Time for a 90° bend 10 s
Drive power, upper beam 1,5 kW
ditto, bending beam 4 kW
Dimensions L x W x H 3410 x 900 x 1400 mm
Weight 3900 kg
Accessories / Special features:
- Manual back gauge min. / max. 350 - 1000 mm with rack and pinion drive
- Manual ...
6
bending length: 2050bending angle (max.): 135stroke: 350weight approx.: 5950messurements (LxWxH): 3750/2300/2100Aluminium: 7Steel: 5Stainlesssteel: 3,5motor power: 2x3/2x3/0,75
STANDART ACCESSORIES
Servo drive of clamping and back gauge ( Z and X axis)
AC high torque motorized drive of folding and beam rotation ( Y and C axis)
Ballscrew spindle system with dual motor drives on clamping and folding
15.6’’ touchscreen controller on swivel arm with ERFOLD BASIC CNC Line by Line sof...
4
pan folder
Schechtl type MA 200/1
with electronic angle quick setting
year of construction 1987
Clsle7n
working width 2040mm
bending capacity steel up to 2mm
a new top tool from Schechtl is ordered and will be delivered with the machine
bending capacity aluminium up to 2,75mm
with mechanical back gauge up to 500mm
upper beam was welded years ago by the previous owner.
Weight approx. 1480kg
The offer is exclusively directed to tradesmen in the sense of § 14 BGB (German Civil Code).
No ...
5
motorized swing bending machine make KRAMER type AMaut III
machine no. 48296, year of construction 1990
technical data:
working length 2540 mm
max. sheet thickness 2,5 mm
Xinxgqauo
big opening of the upper beam 350 mm
adjustability of the lower and bending beam 90 mm
driving power 4,0 kW
duration of one working cycle 7,0 sec.
weight approx. 3750 kg
outside dimensions approx. 3600 x 1000 x 1500 mm
used, in need of repair
very favourable as spare part carrier or for self-assembly
13
Motorised DNC swivel bending Hezinger-FoldingLine
Model HF-MFB2030
Bending length 2,050 mm
Sheet thickness ST / VA / aluminium 3.0 / 2.0 / 4.0 mm
Drive of the axes Y / Z / X 3.0 / 1.5 / 0.4 kW
Machine dimensions W x L x H 2,500 x 3,250 x 2,100 mm
Machines Weight approx. 3.500 kg
Basic equipment:
- 3 controlled motor axes: X Y Z
- Basic control ErFold BASIC with 15.6" touch screen
Inijk7h
- Opening width of the upper beam 160 mm
- 45° upper cheek with tool 30° pointed rail
- Bending beam tool 2-f...
8
Stock number: 2492
Manufacturer: TOS
Year of manufacture: 1969
Machine number: 0290045
TyP / Model: XOM 2000 / 4B
working width: 2.050 mm
Material thickness: 4 mm
Material thickness non-ferrous metal:
Bending up to:
Stroke upper beam: 250 mm
stroke lower part: 100 mm
backgauge:
820uass
accessories/equipment: new rails for lower and upper beam
condition: good
weight: 4 t
dimensions: 3.400 x 1.100 x 1.700 mm
2
plate bending machine with working length 2550 mm, thickness 8 mm,
thickness up to 10 mm for shorter working length
Psmvvm
controler PLC
spezial machine - bending angel 90 °, back gauge on left and rigth separate adjustable
5
Operating Area: 3048*1524mm
Machine overall dimensions: 4960×2280×2200mm
Laser Output Power: IPG 3000w/2000w/1500w
X/Y-axis positioning accuracy: ±0.05mm
X/Y-axis repositioning accuracy: ±0.03mm
X/Y-axis Max. linkage speed: 100m/min
Bxrtaq8m
4
Burnet 2020x1.5
Electric volding
Electric clamping
Hand back gauge
Iwf3v7v
9
Motorized swivel bending machine make HERA type UM III
machine # 2013
Technical data:
working width 2520 mm
max. sheet thickness 3,0 mm
Smallest flange height with largest sheet thickness 16 mm
Smallest inner bending radius with maximum sheet thickness 4.5 mm
max. opening width of the upper beam 350 mm
Dsjnc3x
max. adjustability of lower and bending beam 125 mm
largest diameter for rounding 250 mm
Engine power 5,5 PS
Dimensions 3600 x 1200 x 1750 mm
Weight approx. 3500 kg
with
- Foot switch
used
4
Bending capacity: 3.5 mm
Bending capacity (VA): 2.5 mm
Bending length: 2030 mm
Motor: 3,7 kW
Basic equipment and features:
Clamp beam and the bending flange on both sides about hydraulic driven
Angle the top clamping 45°
Positioning control
Manual bending beam adjustment
Clamping pressure of the upper cheek hydraulic, centrally adjustable for both sides
Manual under cheek crowning
Standard tool set (engine included) including:
-Divided upper cheek tool
-portable 3 foot switch with a separate em...
15
Swivel bending machine FASTI
- Sheet metal capacity at max. 40 kp/mm^2
R2bpgaed
- Type: 2040 X 2
Good condition fully functional can be inspected and tried on site.
Shipping also abroad.
Viewing :
Basically, to avoid any misunderstanding, I would like to inform you that the item is welcome to be inspected and tested under power before purchase. Please ask questions before buying to avoid ambiguities.
For general questions or to make an appointment for a viewing, I am, at the phone number below ...
6
General information / technical data:
heavy mechanical bending machines from sturdy welding construction in very good condition
Working width: 2000 mm
Steel ST 50 maximum material thickness: 20 mm
Yi8y00tru
Opening the top clamping (clamping cheek): 475 mm
Adjustment of the beam: 200 mm motorized height adjustment
Bending angle: 130° via electrical rotation angle input can be set
Upper cheek speed: 6 mm / sec
Bending beam speed: 1.25 RPM (approx. 90 sec for 90 ° bend)
Backgauge: from 50 to 999 m...
3
Schechtl swivel bending machine Mabo 250
Working width 2500 mm at 1,0 mm
Year of manufacture 1979
Be7ejy3fdl
Serial number: 612
Foot switch defective
Dimensions LxWxH 3270x650x1050 mm
14
Semi-automatic press brake ZGH 2140/3.0mm
→ Semi-automatic bending angle, is set on the encoder and potentiometer.
-ᐳ The machine works like a semi-automatic machine. After bending, the beam returns to the home position and the pressure beam returns to the set height. It is set to 10 mm.
→ -ᐳ This machine is suitable for series production
The maximum working length: 2140 mm.
Jtxrwy
bending capacity: 3.0 mm (steel)
bending beam thickness: 30 mm
bending angle: max. 145 degrees
upper beam opening:...
2
Motor. Universal swivel bending machine Fabr. PIECE man + HILLEN type AWR/M 2000/2
Masch.# M 05769061, built in 1976
Technical data:
Juiwqc0
Working width 2050 mm
maximum sheet thickness 2.0 mm
largest passage 3100 mm
Opening of the upper cheek 250 mm
Opening width of the lower beam 105 mm
Opening the beam 105 mm
largest opening width 200 mm
Power 0,75 / 3,0 kW
Weight 2850 kg
Ext 3900 x 1000 x 1700 mm
with
-powered upper -, lower -, and beam
-Foot switch
-Rear gauge
-rear sheet support
used, in...
