Used Bernardo Kf 20 Super for sale (222)

Condition: new, Bernardo DG 32 Pro Drill Grinding Machine Specifications Drill diameter: 2 – 32 mm Point angle: 90° - 135° Speed: 4800 rpm Motor power: 0.25 kW Voltage: 230 V Length: 350 mm Width: 210 mm Nwedpogd H U Uefx Afwsk Height: 305 mm Weight approx.: 32 kg Scope of delivery • SBC diamond grinding wheel • ER 20 collets, 3 – 12 mm, 10 pcs. (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) • ER 40 collets, 13 – 32 mm, 20 pcs. (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) • ER 20 or ER 40 collet chuck Features • Includes a setup for point grinding, i.e., improved centering of the drill tip on the workpiece and reduction of the required feed force • 30 ER collets included in the scope of delivery, which are also suitable for clamping intermediate sizes • Additional station for back-grinding the drill cutting edges (relief angle) • Universally adjustable point angle from 90° - 135° • Rotor with precision ball bearings ensures smooth running • Fast and precise working results due to simple operation • Vibration-free operation due to high inherent weight and rubber feet

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Nwjdszk Nlnopfx Afwsk Features and technical specifications: - The drilling depth is adjusted via a maintenance-free linear guide - Efficient and cost-effective operation thanks to the rapid-lift system, eliminating the need for laborious cranking - Smooth-running and infinitely variable drilling unit - Height adjustment with fine adjustment and gas pressure cylinder for weight compensation - Transverse and height adjustment with scales and adjustable stops - Vibration-free operation thanks to robust steel construction - Drilling depth adjustable via a scale and stop - The drill head height adjustment can be used entirely for vertical slotting - Large-dimension grey cast iron table with a ground surface - Motor power: 1.5 / 1.9 kW - Voltage: 400 V - Speed: 1,400 / 2,850 rpm - Westcott drill chuck: 0–20 mm - Maximum drilling depth: 220 mm - Drilling width: 340 mm - Height adjustment: 145 mm - Swivelling drill head: -60° to +60° - Drilling table size: 595 × 315 mm - Table extension: 2 × 200 × 220 mm - Drilling table height: 830 mm Dimensions: 1,200 × 1,050 × 1,300 mm Weight: approx. 240 kg Availability: at short notice Location: Flörsheim

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet Nwjdpfx Afexablxjwok - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25

Condition: new, Bernardo Motorized Sheet Metal Shear MTA 2060 x 3 mm NCC Cutting length 2060 mm Max. sheet thickness * 3 mm Cutting angle 1° 30’ Strokes/min 31 Working height 810 mm Rear stop 0 – 750 mm Table width 390 mm Motor power 4.0 kW Width 2600 mm Depth 2100 mm Height 1260 mm Weight approx. 1710 kg * Material strength 400 N/mm² Features Equipped as standard with a sheet metal holding device, ideal for thin sheets Support arms on the front for easy processing of large sheets Motorized rear stop, precise adjustment via ball screws Clearly designed control panel with integrated control Robust steel sheet metal construction for vibration-free operation Support table with a right-angled stop on both sides High operator safety thanks to a protective cover and photocells on the rear of the machine 2-blade cutting knives made of high-quality steel guarantee clean and burr-free cutting Automatically acting clamping device for fixing the sheet Scope of supply Nsdpfx Afed Hxnhowjwk Cutting line illumination Motorized NC rear stop Front sheet supports Side stops Protective plate with photocells NC control BRL 401.2 Pneumatic sheet metal holding device Foot pedal with emergency stop Knives made of tool steel

Condition: new, functionality: fully functional, input voltage: 400 V, cutting height (max.): 90 mm, cutting width (max.): 3,200 mm, rotational speed (max.): 6,000 rpm, overall weight: 710 kg, Equipment: CE marking, saw blade guard, Rod guideways – a solution previously found only in top-tier machines, now available as standard Slide table made of aluminum equipped with hardened guideways ensures smooth and precise movement Table extension and widening as standard – ideal for supporting large sheet formats Robust support table enables processing of heavy and large panels without the need for additional support Powerful drive motor guarantees maximum cutting performance, even during intensive continuous operation Easy angle reading set directly on the handwheel – comfort and precision in adjustment Scoring unit with independent motor included as standard Extendable telescopic stop (up to 3100 mm), mountable at the front or rear of the support table – flexibility and convenient handling Stable saw unit ensures precise, clean cuts without vibration Machine body with reinforced, stable design made of steel and grey cast iron combination – ensures durability, rigidity, and precise operation even under heavy load. Parallel fence with a robust, round 40 mm guideway – the tilting option makes material loading easier Workspace – minimum required floor area is 5 × 6 m Technical specifications Table size – length: 935 mm Table size – width: 620 mm Sliding table length – panel/roller: 3200 mm Sliding table width – panel/roller: 370 mm Sliding table, carriage type: Panel Edge trimming length / table movement: 3200 mm Blade size: 315 x 30 mm Njdpjyt I Arjfx Afwowk Max. cutting height 90°: 90 mm Max. cutting height 45°: 65 mm Cutting width with guide: 1295 mm Working height: 850 mm Table extension: 600 x 615 mm Table widening: 900 x 600 mm Extension table: 1210 x 860 mm Main saw rotation speed: 4000 / 6000 rpm Scoring saw rotation speed: 8000 rpm Scoring saw size: 120 x 20 mm Extraction port Ø: 100 mm Motor power: 5.5 kW Motor power S1 100%: 4 kW Scoring unit motor power: 0.75 kW Voltage: 400 V Dimensions – width: 3445 mm Dimensions – depth: 3560 mm Dimensions – height: 1570 mm Weight approx.: 710 kg

Condition: used, Year of construction: 2022, Belt width: 150 mm Belt length: 3000 mm Table size: 960 mm x 350 mm Auxiliary table: 330 mm x 330 mm Veneer sanding device: yes Oscillation: yes Tilting sanding unit: yes Njdpfxjzq Dcze Afwjwk Extraction port: 120 mm Motor power: 3 kW Machine length: 1910 mm Machine width: 840 mm Weight: 330 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Slot drilling machine, like new, hardly used. Nwodpfx Afsy Tk Ufowsk

Condition: new, Bernardo Edge Sander KSM 3000 C with Veneer Sanding Attachment Technical Specifications Work table 960 x 350 mm Table height adjustment 210 mm Belt length 3000 mm Belt width 150 mm Sanding belt backing 1060 x 200 mm Sanding head swivels 90° - 45° Belt speed 20 m/s Additional table 330 x 330 mm Oscillation stroke 20 mm Oscillation motor 0.25 kW (0.34 hp) Dust extraction connection Ø 120 mm Motor output S1 100% 3.0 kW (4.0 hp) Motor input S6 40% 4.5 kW (6.0 hp) Voltage 400 V Machine dimensions (W x D x H) 1910 x 840 x 1020 mm Weight approx. 330 kg Scope of delivery Sanding belt 3000 x 150 mm - K100 Sanding belt oscillation Veneer sanding attachment Additional table Graphite coating Miter fence Sanding platen Dust extraction hose Features • Heavy-duty machine stand in a torsion-resistant and vibration-free design, extremely stable • Serrated infeed fence, ideal for sanding veneer overhangs • Double-sided dust extraction connection 80 / 100 mm for optimal chip extraction • Oscillating sanding belt ensures high material removal and a clean sanding finish • Maintenance-free sanding belt oscillation with separate gear motor, can be switched on as desired • Height-adjustable sanding table for utilizing the entire sanding belt • Standard veneer edge sanding attachment with fine adjustment • Quick changeover from veneer to solid wood sanding possible • Height adjustment of the work table or swiveling of the sanding head is done via handwheels Nodsd N Tdmepfx Afwowk • Spring-loaded belt tension, resulting in automatic compensation for belt length differences • Height-adjustable additional table with dust extraction for sanding radii

Condition: new, Bernardo Universal Lathe Compact 400 V Technical Specifications Center distance 850 mm Center height 200 mm Swinging diameter over bed 400 mm Swinging diameter over cross slide 245 mm Bed width 260 mm Spindle bore 52 mm Spindle mount DIN 55029, D1-5 Speed range, 2 steps 50 - 450 / 450 - 2500 rpm Range of longitudinal feeds (20) 0.025 - 2 mm/rev Range of cross feeds (20) 0.012 - 1 mm/rev Metric threads (26) 0.2 - 14 mm Inch threads (42) 1 - 80 TPI Tailstock diameter 50 mm Tailstock travel 120 mm Tailstock mount MK 3 Motor power 5.5 kW (7.5 hp) Machine dimensions (W x D x H) 1900 x 1000 x 1610 mm Weight approx. 1185 kg Features Standard equipped with a Delta frequency inverter for high torque in the lower speed range and nearly constant speed under load Infinitely variable speed control; the set speed is displayed on a digital display To minimize the effects of vibrations, the massive prism bed is additionally equipped with ribs Versatile applications in general mechanical engineering, production, and the manufacture of individual parts Modern main spindle bearing with angular ball bearings in a precision design The machine bed, cast in one piece, is extremely torsion-resistant and has low vibration, thus fulfilling an essential prerequisite for precise turning Space-saving installation possible thanks to a chip tray that can be pulled out to the front Standard equipped with a 52 mm spindle bore for machining large shaft diameters Scope of supply • 3-axis digital display ES-12 V with LCD display • 3-jaw chuck PO3-200 mm / D5 • Faceplate 320 mm • Fixed steady rest - bore diam. max. 130 mm • Traveling steady rest - bore diam. max. 100 mm • Coolant system • Quick-change tool holder with 4 inserts • Safety device for quick-change tool holder • Micrometer length stop • Friction clutch • Motor with magnetic brake according to CE standard • Initial filling with Shell Tellus 46 • Frequency inverter • Digital speed display • Pull-out chip tray • LED machine light • Change gears • Reduction sleeve Nwsdped Ertrofx Afwjk • 2 centers • Chip guard • Operating tools

Condition: new, Swiveling bending machine with segmented top die, TB 1020 Technical specifications Working length 1020 mm Max. sheet thickness (400 N/mm2) 2.5 mm Max. opening width 48 mm Bending angle 0 – 135° Width 1350 mm Depth* 1115 mm Height 1140 mm Weight approx. 290 kg * with backstop Nwedsd Hxmnepfx Afwjk Features Versatile bending machine for sheet metal workshops and repair shops Robust construction in a modern design Easy adjustment of the top die using a foot pedal, leaving hands free for the workpiece Manual bending machine for standard bending tasks Segmented top die for a wide range of bending possibilities Optimal price-performance ratio Fast and easy bending process using a handle Easy adjustment of the bottom die to the respective sheet thickness High top die for producing profiles with high flanges Scope of delivery Segmented top die Backstop Bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm

Condition: new, Bernardo Dual-Column Bandsaw MBS 300 DG-V PRO Technical Specifications Cutting capacity, round / square 90° 255 mm / 210 x 210 mm Cutting capacity, flat 90° 310 x 210 mm Cutting capacity, round / square 45° R 220 mm / 210 x 210 mm Cutting capacity, flat 45° R 220 x 200 mm Njdpfx Afsd Hzbwewswk Cutting capacity, round / square 45° L 230 mm / 200 x 200 mm Cutting capacity, flat 45° L 230 x 200 mm Cutting capacity, round / square 60° R 135 mm / 135 x 135 mm Cutting capacity, flat 60° R 135 x 135 mm Working height 930 mm Saw band dimensions 2750 x 27 x 0.9 mm Cutting speeds, infinitely variable 20 – 80 m/min Coolant pump 100 W Motor output power S1 100% 1.5 kW Motor input power S6 40% 2.2 kW Voltage 400 V Machine dimensions (L x W x H) 2000 x 1250 x 1900 mm Weight approx. 350 kg Scope of supply • Saw band • Workpiece stop • Base frame • Manometer for band tension • Saw band guide with carbide inserts • Quick-release vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end-of-cut shut-off

Condition: new, Bernardo swivel bending machine with segmented upper, lower, and bending beam TB 1020 Flex Working length 1020 mm Max. sheet thickness (400 N/mm2) 2.0 mm Max. opening width with segments 48 mm Max. opening width without segments 150 mm Max. clearance height closed 125 mm Bending angle 0 – 135° Back gauge 600 mm Working height 900 mm Width 1400 mm Depth* 1070 mm Height 1260 mm Weight approx. 430 kg * with back gauge Features Piano inserts in the upper, lower, and bending beam provide a large number of bending possibilities. Nwsdpfx Afsd Hxm Iewek Casing and special profiles with opposing bends can be easily produced with these models. Universally applicable bending machines for sheet metal workshops and repair shops. Simple swiveling movement of the bending beam via a handle. Easy adjustment of the upper beam for efficient work. High upper beam for producing high-flanged profiles. Large-sized flat guide for precise work. An auxiliary cylinder supports the bending process during hemming. Scope of delivery Segmented upper, lower, and bending beam Back gauge Corner segment left / right each 75 mm | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 200 | 270 mm

Condition: as good as new (ex-display), Year of construction: 2023, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1200 mm column arm 200 mm ram stroke speed 60.0 mm/sec return speed 80. mm/sec work speed 60.0 mm/sec work stroke 100 mm table height 760 mm table width 150 mm oil volume 130 ltr. Nodpfxsxabumj Afwswk voltage 400 Volt Control ESA E21 total power requirement 4.0 kW weight 3030 kg range L-W-H 2050 x 1800 x 2030 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours Furnishing: - compact hydraulic press brake - BERNARDO NC control model E21 - swiveling control panel - electrical adjustment of the backgauge - Back stop on recirculating ball spindles - electrical adjustment of the immersion depth - Laser protection device in front - Upper deer foot tool - divided - Tool holder with quick change system - Universal die block - side + rear protective device - 2x front support arms - movable double foot switch (operation)

Condition: new, Bernardo swivel bending machine with segmented upper and lower beam, TBS 1020 Working length 1020 mm Max. sheet thickness (400 N/mm2) 2.0 mm Nwedpod Hxmtsfx Afwsk Max. opening width 54 mm Bending angle 0 – 135° Width 1350 mm Depth* 1115 mm Height 1170 mm Weight approx. 310 kg * with backstop Features Segmented upper and bending beam for a wide range of bending possibilities Clamping via foot pedal, leaving hands free for optimal positioning of the sheet metal Universally applicable bending machine for sheet metal workshops and repair shops Robust construction with modern design Manual bending machine for standard bending tasks Optimal price-performance ratio Quick and easy bending process via handle Easy adjustment of the lower beam to the respective sheet metal thickness High upper beam for producing profiles with high hems Scope of delivery Segmented upper beam Segmented lower beam Backstop Bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm

Condition: as good as new (ex-display), Year of construction: 2025, bore capacity in steel (diameter) 35.0 mm bore capacity in cast iron 40.0 mm threading M 24 in Stahl throat 320 mm morse taper 4 MK bore stroke 160 mm turning speeds 65 - 3250 U/min table: 500 x 420 mm throat 320 mm weight 375 kg range L-W-H 600 x 870 x 2170 mm Year 2025 showroom model (!!) Approx. 1 hour of operation Special price on request Furnishing: - Infinitely variable speed, ideal for - Set the desired cutting speed. - Automatic tool ejector and thread cutting device as standard - Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev - Solid gray cast iron table with rotating and swiveling support surface - T-slots in the machine base enable high workpieces to be clamped Nodpfsxaabrex Afwswk - Guaranteed concentricity 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth running - Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, MT 4/2 - coolant device - Thread cutting device - Electromagnetic spindle feed - Automatic tool ejector - LED machine light - First filling with Shell Tellus 46 - Digital speed display - Height-adjustable protective cover

Condition: new, Universally applicable double grinding machine for professional users. The induction motor runs quietly and maintenance-free thanks to the quality ball bearings. The quality grinding wheels ensure optimal work results when sharpening and deburring tools. Nsdpfx Afovnrm Hswewk Technical data: Grinding wheel bore: 32 mm Grinding wheel grain: K 36 / K 80 Speed: 2850 rpm Motor output power S1 100%: 0.90 kW Motor input power S6 40%: 1.25 kW Voltage: 400 V Width: 510 mm Depth: 270 mm Height: 310 mm Weight approx.: 25 kg Features: - ON-OFF switch in accordance with IP54 with undervoltage release - Extended application area thanks to optionally available grinding attachment - Universally applicable for a wide range of materials (metal, plastic, wood, ...) - Very smooth running thanks to balanced rotor with quality ball bearings - Large protective glasses provide optimal protection against flying sparks - Stable and adjustable workpiece support made of cast iron - Powerful pulling power thanks to powerful Drive motor Scope of delivery: - Roughing disc K 36 - Finishing disc K 80 - Spark guard on both sides - Workpiece support Note: Illustrations may show special equipment and application examples. These are not included in the scope of delivery. (Belt grinding attachment and base frames available for an additional charge)

Condition: used, Bernardo Type T 1000S swivel-spindle router for versatile routing work on solid timber, sheet materials and profiles. The machine is ideal for joinery and carpentry workshops requiring precise and high-performance milling solutions. Featuring a swivelling spindle, sliding carriage, angle stop and pneumatic hold-down device. Technical data: - Milling spindle diameter: 30 mm - Speed ranges: 1400 / 3500 / 6000 / 800 rpm - Clamping length: 125 mm - Motor power: 4.0 kW Nedpfx Ajzryqkjfwowk

Condition: new, Bernardo belt grinder MS 150 x 2000 S-2 Belt dimensions: 150 x 2000 mm Belt speed: 14.5 / 29 m/s Nedpfsd Rw Rhox Afwewk Contact wheel diameter x width: 200 / 155 mm Flat grinding table: 460 x 150 mm Dust extraction port diameter: 100 mm Motor output power S1 100%: 2.1 / 2.8 kW Motor input power S6 40%: 2.8 / 3.6 kW Voltage: 400 V Length: 1080 mm Width: 520 mm Height: 1000 mm Weight approx.: 85 kg

Condition: new, Bernardo Belt Sander MS 75 x 2000 S-2 Technical Specifications Belt dimensions: 75 x 2000 mm Belt speed: 14.5 / 29 m/s Contact wheel Ø x W: 200 / 80 mm Planing sanding table: 460 x 75 mm Dust extraction connection Ø: 100 mm Nwjdpsd Du S Uefx Afwjk Motor output S1 100%: 1.5 / 2.2 kW Motor input S6 40%: 2.2 / 3.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 67 kg Scope of delivery • Sanding belt K 80 • Foldable protective shield • Sanding and support table • Workpiece stop • Dust extraction nozzle • Motor circuit breaker • Rubberized sanding roller • Graphite lining • Separate on/off button • Base frame

Condition: new, Bernardo Hydraulic Guillotine Shear HST 1300 x 4 Technical Specifications Cutting length: 1300 mm Max. sheet thickness*: 4 mm Cutting angle: 2° Motorized backgauge: 0 – 700 mm Strokes / min: 16 Number of hold-downs: 1 pc. Table height: 850 mm Support arms: 3 pcs. Oil tank: 60 liters Motor power: 5.5 kW Length: 2070 mm Depth: 2040 mm Height: 1365 mm Weight: approx. 1,970 kg * Material strength 400 N/mm² Features • Machines offer high reliability, safety, and cost-effectiveness • Sturdy welded steel construction ensures torsion-free operation • Precise working due to integrated cutting line illumination with shadow outline • High operator safety provided by protective guard and rear photoelectric sensors • Designed for efficient cutting of various materials, such as steel sheet, brass, aluminum, copper, etc. • Cutting via foot pedal allows hands-free sheet positioning • Front support arms for easy handling of large plates • Simple adjustment of the cutting gap via side-mounted lever • Table support surface with integrated rollers, ideal for large workpieces • Automatic hold-down for sheet fixing Scope of Delivery • Cutting gap adjustment • Cutting line illumination • Motorized NC backgauge • Front sheet supports • Table support surface with integrated rollers • Side stop • Safety guard with photo sensors • NC controller E21S Nodpfxeyg Hwne Afwowk • Foot pedal with emergency stop • Blades made of tool steel

Condition: new, Bernardo Production Lathe Goliath 660 x 3000 incl. 3-Axis Digital Readout Technical Specifications Centre distance: 3000 mm Centre height: 330 mm Swing over bed: 660 mm Swing over gap*: 870 mm Swing over cross slide: 420 mm Bed width: 400 mm Spindle bore: 105 mm Spindle mounting: DIN 55029, D1-8 Speed range (16 steps): 36 – 1600 rpm Longitudinal feed range (65 steps): 0.063 – 2.52 mm/rev Cross feed range (65 steps): 0.027 – 1.07 mm/rev Metric threads (22): 1 – 14 mm Inch threads (26): 2 – 28 TPI (G/1") Quill diameter: 75 mm Quill travel: 150 mm Quill taper: MT 5 Motor power: 9.0 kW (12.0 HP) Machine dimensions (W x D x H): 4500 x 1280 x 1650 mm Approx. weight: 3990 kg * Removable bed gap: 240 mm Nedsxxaxnopfx Afwowk Features • Versatile applications in general engineering, production, single-part manufacturing, etc. • The one-piece cast machine bed offers extremely high rigidity and low vibration, fulfilling a key requirement for precision turning • Modern headstock bearing with precision angular contact ball bearings • Central, user-friendly control for feeds and threading, with lead and feed screws • Rapid traverse (longitudinal and cross) as standard to minimize non-productive times • Large-dimensioned, hardened, and precision-ground gears • Removable gap bridge enables machining of large-diameter workpieces • Adjustable tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Electromechanical foot brake to reduce non-productive times • Excellent machining performance even during facing operations Scope of delivery • Slip clutch • Rapid traverse (longitudinal and cross) • LED machine lamp • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-315 mm / D8 • Face plate 630 mm • Fixed steady rest – max. bore diameter 250 mm • Travelling steady rest – max. bore diameter 110 mm • 1 live centre / 1 revolving centre • Motor with magnetic brake according to CE standard • Foot pedal with brake function to CE standard • Factory fill with Shell Tellus 46 • Coolant device • Quick-change toolpost with 4 holders • Safety guard for quick-change toolpost • Reducing sleeve • Chip guard (swarf back panel) • Operating tools

Condition: new, Bernardo Belt Sander MS 75 x 2000 S Technical Specifications Nedpfx Afod Du S Hjwowk Belt dimensions: 75 x 2000 mm Belt speed: 29 m/s Contact wheel Ø x W: 200 / 80 mm Flat grinding table: 460 x 75 mm Dust extraction port Ø: 100 mm Motor output power S1 100%: 3.0 kW Motor input power S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Scope of delivery • Sanding belt K 80 • Foldable protective cover • Sanding and support table • Workpiece stop • Dust extraction port • Motor protection switch • Rubberized grinding roller • Graphite pad • Separate on/off button • Base frame

Condition: new, Bernardo Hydraulic Guillotine Shear HST 1300 x 6 Technical Specifications Cutting length: 1300 mm Max. sheet thickness*: 6 mm Cutting angle: 2° Motorized backgauge: 0 – 700 mm Strokes / min: 16 Number of hold-downs: 1 pc. Table height: 850 mm Support arms: 3 pcs. Oil tank: 60 liters Motor power: 5.5 kW Length: 2070 mm Depth: 2040 mm Height: 1365 mm Weight: approx. 2020 kg * Material strength: 400 N/mm² Features • High reliability, safety, and cost-effectiveness • Robust, welded steel frame for torsion-free operation • Precise work thanks to integrated cutting line illumination with shadow outline • High operator safety via protective cover and photocells at the rear of the machine • Efficient cutting of various materials such as steel sheet, brass, aluminum, copper, etc. Nwedpfx Afeyg Hxfowok • Cutting via foot pedal, keeping hands free for optimal sheet positioning • Front support arms for easy handling of large plates • Simple gap adjustment via side-mounted lever • Table support surface with integrated rollers, ideal for large workpieces • Automatic hold-down device for fixing the sheet Scope of Delivery • Cutting gap adjustment • Cutting line illumination • Motorized NC backgauge • Front sheet supports • Table support with integrated rollers • Side stop • Protective guard with photocells • NC control E21S • Foot pedal with emergency stop • Tool steel blades

Condition: new, Special offer price for in-stock items! Only while supplies last! Price ex warehouse, plus VAT. Belt sanding machine: Bernardo Type/Model: MS 75 x 2000 S Condition: new Belt dimensions: 75 x 2000 mm Belt speed: 29 m/s Contact wheel Ø x W: 200 / 80 mm Platen sanding table: 460 x 75 mm Dust extraction connection: 100 mm Motor output power S1 100%: 3.0 kW Motor input power S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Njdpsfnr Aijfx Afwswk Features: Good sanding performance due to high belt speed Quick adjustment for horizontal and angled positions Continuous platen sanding surface for optimal sanding of long workpieces Consistent belt tension thanks to spring-loaded tensioning device Universally applicable for sanding edges, surfaces and for round sanding Including quick-release system for fast belt changes Simple adjustment of parallel belt run by means of adjusting screw Graphite coating on the platen sanding surface increases the sliding properties of the sanding belt Scope of delivery: - Sanding belt K 80 - Folding protective cover - Sanding and support table - Workpiece stop - Dust extraction nozzle - Separate on/off button - Base frame

Condition: excellent (used), Year of construction: 2009, Bernardo FM 45 V drilling and milling machine. The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to the standard spindle feed. The dovetail guide of the gear head ensures maximum precision and stability. Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Throat 260 mm Spindle speed (12) 50 - 2520 rpm Spindle mount MK 4 Quill stroke 120 mm Quill feed (3) 0.12 / 0.19 / 0.26 mm/rev Table size 820 x 240 mm Distance spindle / table 40 - 485 mm Travel path (x / y) 550 / 190 mm Height adjustment of milling head 400 mm T-slot size 14 mm T-slot distance 55 mm Motor output power S1 100% Nwjdpfsvutw Hjx Afwsk 0.85 / 1.1 kW (400 V) Motor input power S6 40% 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H) 1150 x 850 x 1450 mm Weight approx. 285 kg Standard with automatic spindle feed and thread cutting device Large speed range 50 - 2520 rpm (12 levels) Dovetail guide for x, y and z axes, adjustable via wedge strips Versatile application options, slot milling, face milling, boring,.... Solid large cross table, precisely surface-machined Milling: spindle feed via handwheel Drilling: spindle feed via handwheel High-quality aluminum motor, designed for continuous operation Stable and vibration-free cast design Simple and quick speed change using a gear lever Pivoting milling head for angle drilling, milling bevels, etc. Location: from stock 54634 Bitburg - available at short notice -