Used Big Bag Emptying Station for sale (11,451)

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Gedpfx Aqezf Nk Tsijbr Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Year of construction: 2019, condition: used, functionality: fully functional, Approximately 250 pieces in stock. Price per piece: 100 Euros. A mix of used and new items. Gedoy Uc Sfepfx Aqijbr

Condition: used, Year of construction: 2016, functionality: fully functional, We are offering this used NEWTEC BAG PALLETIZING Chimpal 600 palletizer, year 2016. Manufacturer: NEWTEC BAG PALLETIZING Model: Chimpal 600 Serial number: A1607 Year of manufacture: 2016 Type: 600.S1000.G067.053.OR3 Description: Palletizing Equipment The system can also palletize Euro pallets 800x1200 mm or CP1 1000x1200 mm. Maximum bag weight: 50 kg Capacity: up to 500 bags per hour Including sheet dispenser The system is currently in operation and can be inspected under working conditions until it is dismantled in September/October 2026. Test palletizing is possible during the summer. Newtec has been acquired by Haver & Böcker. Service for the palletizers is provided from Germany. A connected wrapper can be seen in the pictures, which is also for sale. Gsdpfx Aqoyzzr Roijbr

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Gbedpfoyr Awbex Aqior Smurfit Kappa Vitop, ITALY, 2016 Bag filling volume from 1L to 28L Pouch-up filling volume from 1L to 3L Touch screen control panel The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Easy to operate and maintain Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Suitable for Vitop® Original and Vitop® Compact Simple to adjust between sizes Optional laminar air flow for filling in ultra clean conditions Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.

Condition: new, functionality: fully functional, Year of construction: 2024, A crawler mobile stone crusher is a mobile crushing device that has a tracked chassis, which allows it to move around the site and be transported from one location to another. This type of crusher is generally used in areas where there are space restrictions and the stones need to be crushed directly at the site, making it a versatile and flexible option for various applications. Here are some key features and aspects of crawler mobile stone crushers: 1. Mobility: - The primary advantage of a crawler mobile stone crusher is its mobility. The tracked chassis enables it to move easily on different types of terrain, making it suitable for a wide range of applications, including construction sites, quarries, and demolition projects. 2. Crushing Mechanism: - Crawler mobile stone crushers are equipped with a primary crusher to break down the large rocks into smaller pieces. Common types of primary crushers include jaw crushers, impact crushers, or cone crushers. 3. Versatility: - These crushers are versatile and can handle various types of materials, including hard rocks, ores, and recycled concrete. They can be used for primary, secondary, or tertiary crushing depending on the specific requirements of the application. 4. Remote Control Operation: - Many crawler mobile crushers are equipped with remote control systems, allowing operators to control the equipment from a distance. This feature enhances safety and efficiency, especially in challenging or hazardous environments. 5. Compact Design: - Crawler mobile stone crushers typically have a compact design, making them suitable for working in confined spaces or on construction sites with limited available space. 6. Hydraulic System: - The crushers are often equipped with a hydraulic system to facilitate quick and easy adjustment of the crusher settings. This includes adjusting the crusher's discharge opening and controlling the feed rate. 7. High Production Capacity: - Despite their compact design, crawler mobile stone crushers can have high production capacities. This is crucial for efficiently processing large volumes of material on construction sites or in mining operations. 8. Screening Unit (Optional): - Some crawler mobile crushers come with an integrated screening unit, allowing the production of multiple particle sizes in a single pass. This can be particularly useful in applications where a specific range of sizes is required. 9. Power Source: - Crawler mobile stone crushers are typically powered by diesel engines, providing the flexibility to operate in remote areas where electrical power may not be readily available. 10. Easy Maintenance: - Many crawler mobile crushers are designed with ease of maintenance in mind, with features such as access panels and service points to simplify routine inspections and repairs. Crawler mobile stone crushers have become popular in the construction and mining industries due to their flexibility, mobility, and ability to crush a variety of materials on-site. They offer a solution for efficient and convenient mobile crushing operations in diverse working environments. Gbjdpfx Aqoq Nxpgsier

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, REF: MM6428 Gsdpfsy Unmuex Aqiobr 1 x PFM flow wrapper with peg and chain infeed conveyor and painted mobile frame.  Manufacturer - PFM Packaging Machinery S.p.A. Model - Swift.  Date of manufacture - 2011.  Electrical requirements - 230 V / 50 hz / 1 phase. Power - 14.5 Amps / 3.1 kW. Overall dimensions - 4150mm long x 950mm wide x 1950mm high. Adjustable folding box - up to 90mm wide.  Can wrap using clear or printed film. Supplied without the adapted infeed system, will be back to the standard infeed system. The PFM Swift is a horizontal flow-wrap machine with rotary crimp jaws, designed to wrap at speeds of up to 100 bags per minute. An extremely versatile, compact and reliable machine, the Swift will accomodate a wide range of products, with its standard adjustable forming box, providing the solution to quick and efficient size changes.

Year of construction: 2013, condition: excellent (used), functionality: fully functional, REF: MM6423 Gedey Um T Hopfx Aqiobr Complete weighing and bagging system which has previously been used to pack frozen peas and vegetarian products into pillow packs. This system comprises of the following equipment: 1 x Infeed swan-neck conveyor with flighted belt mounted on mobile frame (stored outside). Date of manufacture - 2013. Belt width - 245mm wide. 1 x Yamato Scale Dataweigh (UK) Ltd ADW-514AWCC 14-head multi-head weigher with dimple pans. Manufacturer - Yamato Scale Co., Ltd. Speed - up to 120 drops/minute (depending on product and weight). Weighing range - up to 1000g. Rated to IP66 (waterproof). 1 x Gantry unit with steps. Footprint dimensions - 5.7m long x 2.7m wide x 2.72m high. 1 x Gainsborough Engineering Ltd GV2K3 vertical form, fill and seal bagging machine. Manufacturer - Gainsborough Engineering Ltd. Date of manufacture - 2013. Sealing jaws: Horizontal - 360mm wide / Vertical - 420mm long. Packing speed - up to 60 packs/minute (depending on bag size). Bag size range: Smallest - 80mm wide x 80mm long / Largest - 320mm wide x 350mm long. Supplied with jaws for poly and laminate film, block-bottom and gusseted bags as well as 3 x forming tubes. Forming tubes: for forming pillow/’fin-seal’ packs measuring 130mm, 220mm and 270mm wide. 1 x Outfeed inclined conveyor. Belt dimensions – 2250mm long x 425mm wide. Outfeed height – 1000mmm. Some spare parts are also included. Videos available on request.

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Gbsdpfxsy Hlvwe Aqier Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, REF: MM6413 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd Model of VFFS bagger – GV2K1. Godoy Hlkbepfx Aqiobr Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Not operational, out of action 3-4 months.

Condition: good (used), Complete weighing and vertical form, fill and seal twin bagging system, previously used to pack chocolate drops. This system comprises of the following equipment: 1 x Joy Conveyors product hopper. Manufacturer – Joy Conveyors Ltd. Overall dimensions – 550mm long x 610mm wide x 680mm deep. 1 x Joy Conveyors bucket elevator. Manufacturer – Joy Conveyors Ltd. 1 x Stainless-steel gantry and steps. Gantry overall dimensions – 3m long x 3m wide. 1 x High Dream AC-6B14 14-head multihead weigher with dimple pans and 10.4’’ touch-screen control panel. Manufacturer – High Dream Intelligent Machinery Co., Ltd. Weighing range – 25g – 500g. Accuracy - ±0.5g. Speed – up to 140 bags/minute (product dependent). 1 x Keymac servo-driven timing hopper. Manufacturer – Keymac Packaging Systems Ltd. 1 x Keymac vertical form, fill and seal twin bagging machine. Manufacturer – Keymac Packaging Systems Ltd. Model – BT2600 VFFS. Sealing jaws - Unit 1: Vertical - 300mm & Horizontal - 250mm. Unit 2: Vertical - 320mm & Horizontal - 250mm. Electrical requirements – 220-240 V / 60-60 hz / 1 phase. Previously running 210mm wide film. 2 x Forming tubes, each 60mm diameter. Has extension chute for larger packs. Overall dimensions - 1.9m wide x 1.6m deep x 2.1m high. 1 x Outfeed inclined conveyor. Infeed height - 200mm. Outfeed height - 1000mm. Belt dimensions - 3m long x 195mm wide. Gjdpsy An I Iofx Aqijbr System footprint - 7.5m long x 3.4m wide x 4.4m high.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Complete 'Bag-in-Bag' forming system, previously used to produce multipacks of crisps. Gbedpfx Aeyvac Aeqier System comprises of: 1 x Feed hopper and steps/gantry. 1 x Comek s.r.l. infeed swan-neck / 'Z' conveyor. Manufacturer – Comek s.r.l. 1 x Comek s.r.l. / Propema VPB 400 vertical form, fill and seal bagging machine. Manufacturer – Comek s.r.l./Propema S.r.l. Date of manufacture – 2014. Sealing jaws - 380mm horizontal & 620mm vertical. Film width - up to 810mm wide. 1 x Markem Imaje SmartDate X65 128mm thermal transfer printer. Manufacturer – Markem-Imaje. Date of manufacture – 2021. 1 x Flash label applicator (never used / required for seller's products). 1 x Hole punch (3mm) to help deflate the multipack bags into large boxes. 1 x Comek s.r.l. outfeed inclined conveyor. Manufacturer – Comek s.r.l. Belt width - 400mm wide. Conveyor length - 1800mm long. 1 x 1.2m diameter stainless-steel Lazy Susan / rotary packing table. Height - 750mm (height-adjustable feet). This system was producing bulk multipack bags of 3 x different flavours of bags of crisps. Speed - up to 18 packs/minute. Footprint of system - 7.3m long x 2.7m wide x 3.5m high (infeed conveyor to lazy susan).

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 1013, REF: MM6216 1 X Comek vertical form, fill and seal bagging machine with Zodiac HS screen Technical specification ⚙️ ✅ Manufacturer - Comek Automatic Packaging Solutions ✅ Model - VPB 330 EVO. ✅ Date of manufacture - 2019. Godpfx Aqexd Ubnoiobr ✅ Weight - 2,500 Kg ✅ Installed power - 10 Kw ✅ Sealing jaws - 330mm (horizontal) x 460mm (vertical). ✅ Overall dimensions - 2000mm long x 1500mm wide x 1800mm high. Note 🗒️ No printer.

Condition: used, functionality: fully functional, machine/vehicle number: B3040009, Year of construction: 2019, operating hours: 15,605 h, load capacity: 10,000 kg, lifting height: 18,800 mm, fuel type: diesel, mast type: telescopic, construction height: 10,350 mm, power: 185 kW (251.53 HP), empty load weight: 43,000 kg, drive type: Diesel, construction width: 4,600 mm, Empty container stacker Chassis number: B3040009 Load center: 1220 Mast type: Telescopic Transmission: TE14400-LU Condition: Ready for use and fully functional Godpfx Asyrvcwjqisbr Technical condition: good Front tire type: Superelastic Front tire size: 14.00-24 Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire size: 14.00-24 Rear tire condition: 0 - 20% Side shifter, Heater, full cabin, air conditioning, central lubrication, camera, 30' auto-stop

Condition: used, functionality: fully functional, machine/vehicle number: B30400223, Year of construction: 2021, operating hours: 16,045 h, load capacity: 10,000 kg, lifting height: 18,800 mm, fuel type: diesel, mast type: telescopic, construction height: 10,350 mm, power: 185 kW (251.53 HP), empty load weight: 43,280 kg, drive type: Diesel, construction width: 4,600 mm, Empty container handler Chassis number: B30400223 Load center: 1220 Mast type: Telescopic Transmission: TE14400-LU Condition: Ready for operation and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 14.00-24 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 14.00-24 Gbjdpfx Aqoyrvc Dsijr Rear tire condition: 40 - 60% Side shifter, Heater, full cabin, air conditioning, central lubrication, camera, 30' automatic stop

Condition: used, functionality: fully functional, machine/vehicle number: B30400080, Year of construction: 2020, operating hours: 18,940 h, load capacity: 10,000 kg, lifting height: 18,800 mm, fuel type: diesel, mast type: telescopic, construction height: 10,350 mm, power: 185 kW (251.53 HP), empty load weight: 43,140 kg, drive type: Diesel, construction width: 4,600 mm, Empty container handler Chassis number: B30400080 Load center: 1220 Mast type: Telescopic Transmission: TE14400-LU Condition: Ready for operation and fully functional Technical condition: good Front tyres type: Superelastic Front tyres size: 14.00-24 Front tyres condition: 80 - 100% Rear tyres type: Superelastic Gbsdpfx Aqoyrvcqsisr Rear tyres size: 14.00-24 Rear tyres condition: 80 - 100% Sideshift, Heater, Full cabin, Air conditioning, central lubrication, camera, 30' autostop

Condition: used, functionality: fully functional, machine/vehicle number: M11658, Year of construction: 2018, operating hours: 13,000 h, load capacity: 10,000 kg, lifting height: 16,200 mm, fuel type: diesel, mast type: telescopic, construction height: 3,900 mm, power: 137 kW (186.27 HP), empty load weight: 40,800 kg, total length: 6,650 mm, drive type: Diesel, construction width: 4,100 mm, Empty Container Reach Stacker VIN: M11658 Mast Type: Telescopic Transmission: ZF 4WG191 Condition: Ready for use and fully functional Gjdovtuzqepfx Aqisbr Technical Condition: Good Front Tire Type: Pneumatic Front Tire Size: 14.00-24 Front Tire Condition: 40 - 60% Rear Tire Type: Pneumatic Rear Tire Size: 14.00-24 Rear Tire Condition: 20 - 40% Description: Camera, central lubrication, good running and working condition Sideshift, Full cab, air conditioning,

Condition: used, functionality: fully functional, machine/vehicle number: F214E01780T, Year of construction: 2019, operating hours: 11,900 h, load capacity: 11,000 kg, lifting height: 16,450 mm, fuel type: diesel, mast type: simplex, construction height: 10,800 mm, power: 180 kW (244.73 HP), empty load weight: 43,550 kg, drive type: Diesel, Empty container handler Chassis number: F214E01780T Mast type: Standard Transmission: ZF WG210 Condition: Ready for operation and fully functional Technical condition: Good Gbedjxzv Hmspfx Aqisr Front tire type: Pneumatic Front tire size: 14.00-24 Front tire condition: 60 - 80% Rear tire type: Pneumatic Rear tire size: 14.00-24 Rear tire condition: 20 - 40% Description: In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container handlers, reach stackers, forklifts, and terminal tractors in stock at our Oldenburg warehouse. Please visit our website - hinrichs-Forklifts. Leasing, hire purchase, and financing under fair conditions are always possible for us. We are also happy to purchase your used equipment independently of a vehicle purchase. Feel free to call me, Marco Levermann, for detailed advice on this MAKE - MODEL. By the way: Our specialist forklift workshop is focused on maintenance and repairs of large machines from 8 tons upwards. We are also happy to sell your vehicle on consignment. Side shifter Full cabin,

Condition: new, A twin blade saw that has been specifically designed for cutting glazing beads accurately to length, with either a straight or mitred cut. The machine has two work-levels one set above the other, allowing two lengths of beading to be cut simultaneously. The two lengths of bead are held secure during the cutting operation by the front pneumatic clamps. Setting the correct length is achieved by means of handwheel moving the left head in relationship to the fixed right head, the length is easily read from the mechanical digital display. Gbjdpfx Aqody Hqvsior Min/Max. cutting length 150mm - 2400mm Max. cutting section at 90° 55 x 100mm Max. cutting section at 45° 40 x 100mm 2 x sawblades dia. 220mm x 30mm bore Motor 1.6hp, 3 phase CE Safety requirements

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished Gbsdpeb Tmrvsfx Aqisr 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. The hydraulic lifting of the tables is controlled by push button operation 3,5kw motor Godpfx Aedzc Rfeqijbr 6m standard length (optional 12m) 4m maximum panel height Optional side and end stops for floor cassette assembly

Condition: excellent (used), mileage: 860,572 km, power: 449 kW (610.47 HP), first registration: 02/2005, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 7,100 mm, total width: 2,500 mm, total height: 3,350 mm, Year of construction: 2005, Equipment: ABS, EBS, air conditioning, differential lock, electric window regulation, power assisted steering, retarder, = Additional Options and Accessories = - Aluminum fuel tank - Leaf spring suspension - Differential lock - Speed limiter - Air conditioning - Air-suspended seats - Air horn Gbodpfxozt Npxj Aqijr - Radio/CD player - Rotating beacon - Sun visor - Tool box - Central lubrication system = Additional Information = Suspension: Leaf spring suspension Front axle: Steerable; tire tread depth left: 60%; tire tread depth right: 60% Rear axle 1: Twin tires; differential lock; tire tread depth left inner: 30%; tire tread depth left outer: 30%; tire tread depth right inner: 30%; tire tread depth right outer: 30%; reduction gear: external planetary axles Rear axle 2: Twin tires; differential lock; tire tread depth left inner: 30%; tire tread depth left outer: 30%; tire tread depth right inner: 30%; tire tread depth right outer: 30%; reduction gear: external planetary axles Number of cylinders: 6 Technical condition: very good Optical condition: very good

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,105 h, load capacity: 10,000 kg, lifting height: 18,850 mm, fuel type: diesel, mast type: duplex, construction height: 10,795 mm, power: 168 kW (228.42 HP), empty load weight: 42,990 kg, drive type: Diesel, Empty Container Handler Load center: 1220 mm Mast type: Duplex Transmission: ZF WG211 automatic, 5/3 gears Condition: Operational and fully functional Technical condition: Very good Front tire size: 14.00-24 Front tire condition: 40 - 60% Rear tire size: 14.00-24 Rear tire condition: 40 - 60% ELME 584 sidespreader, 20ft-40ft, equipped with hooks and hydraulic clamp for double box lifting, +/-3° lateral tilt compensation, hydraulic sideshift +/- 600 mm Hydraulic, extendable spreader support on lifting frame, lift suspension via hydraulic accumulator, central lubrication system, automatic speed reduction depending on lift height, mast tilt, and if container(s) are clamped, engine preheater (230V), "one-touch" joystick function for automatic spreader adjustment (20'–40'), operator cab with air conditioning and sun blinds, air-suspended driver's seat with headrest and heating. Godpfxjzt Dyfo Aqiobr Safety features: - Hydraulic spreader support on lift mast (for container checker safety) - Lifting suspension by hydraulic accumulator - Central greasing system - Engine preheater (230V) - Air conditioning - Drive speed limitation depending on lifting height and mast tilt angle - One-touch joystick function for automatic spreader adjustment (20–40ft) - Air-suspended, heated driver's seat - Sun blinds at roof and rear windows Condition: inspected, repaired, serviced, and cleaned; ready for work.

Condition: excellent (used), mileage: 99,400 km, power: 375 kW (509.86 HP), first registration: 06/2024, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 38,500 mm, fuel: diesel, fuel tank capacity: 790 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 1 m³, Year of construction: 2024, Equipment: ABS, AdBlue, central locking, cruise control, electric window regulation, parking heater, power assisted steering, spoiler, traction control, = Additional options and accessories = - Adaptive cruise control - DAB - Roof spoiler - Hydraulic system - Tipping hydraulics - Refrigerator - Lane departure warning system - Power take-off (PTO) - Power take-off (PTO) - Radio and audio system - Disc brakes - Speed limiter - Auxiliary heater - Enhanced engine brake - Sun visor = Special features = W1T96340010748039 = More information = Tire size: 315/70R22.5 Brakes: disc brakes Front axle: Steerable; Tread depth left: 60%; Tread depth right: 60%; Suspension: leaf spring suspension Rear axle: Dual tires; Tread depth left inner: 60%; Tread depth left outer: 60%; Tread depth right inner: 60%; Tread depth right outer: 60%; Suspension: air suspension Number of cylinders: 6 Engine displacement: 12,809 cc Technical condition: very good Optical condition: very good For more information, please contact Youri van Doorne or Timothy Schutter. Gbodpfjzt Sq Sex Aqier

Condition: excellent (used), Year of construction: 2022, joke Technology ENESKA PostPro – Post-processing station for 3D printing Manufacturer: joke Technology GmbH Type: ENESKA PostPro Year of manufacture: 2020 Machine type: Post-processing station for additively manufactured components For sale is a used joke ENESKA PostPro post-processing station for the professional post-processing of additively manufactured plastic components. The system was specifically designed for the depowdering, deburring, grinding, polishing, and finishing of 3D-printed components and features a closed processing chamber with integrated extraction technology, LED lighting, and convenient tool control. The scope of supply includes a comprehensive original accessory package with various electric and pneumatic processing tools, abrasives, and other accessories as shown in the pictures. Technical data: Manufacturer: joke Technology GmbH Type: ENESKA PostPro Year of manufacture: 2020 Power supply: 400 V / 50–60 Hz Connected load: 6,500 VA Fuse: 16 A slow-blow Output voltage (U20): 24 V Working chamber volume: approx. 560 l Working chamber: Large stainless steel working chamber Closed processing chamber Large viewing window LED working chamber lighting Integrated compressed air connections Connections for multiple processing tools Equipment: Touchscreen control HEPA H13 filter system Closed processing chamber Manual operations with protective gloves Perforated stainless steel work table Tool connections for electric and pneumatic tools Height-adjustable machine feet Tool package: Godszrvd Hepfx Aqiobr Electric precision grinder Electric high-speed grinder Pneumatic belt grinder Compressed air blow gun with spiral hose Compressed air hoses Original joke replacement gloves Grinding belts Grinding pins Grinding discs and flap discs Plastic hammer Screwdriver Other accessories as shown in the pictures Dimensions: External dimensions: approx. 1,437 × 1,685 × 1,640 mm Weight: approx. 748 kg Transport data: Weight: approx. 748 kg Easy loading using a forklift or crane. Condition: Used Machine from industrial use. Optical condition as shown in the pictures. Scope of supply: joke ENESKA PostPro Electric and pneumatic processing tools Compressed air accessories Original replacement gloves Grinding and consumable materials Other accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to change, errors and prior sale.

Condition: used, mileage: 370,990 km, power: 478 kW (649.90 HP), first registration: 02/2021, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 3,350 mm, fuel: diesel, brakes: retarder, color: silver, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 8,830 mm, Year of construction: 2021, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, lane keeping assist, parking heater, retarder, seat heater, traction control, = Additional Options and Accessories = - Remote central locking - Tilting hydraulics - Air suspension - Engine brake - Hub reduction - Radio - Sun visor - Spotlights - Lane keeping assist - Auxiliary heater = Notes = Gbjdpjx Sp Smefx Aqior Scania R650 6x4 10,000 kg front axle. 13,000 kg rear axle with hub reduction. Spring suspension front / air suspension rear. Removable axle, 12,000 kg BPW. Self-steering / trailing axle. Manual gearbox. Retarder. Hydraulic. = Further Information = Technical Information Number of cylinders: 8 Axle Configuration Front axle: Tire size: 385/65R22.5; Steered; Tire tread depth left: 50%; Tire tread depth right: 50%; Brakes: Disc brakes; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/80R22.5; Dual tires; Tire tread depth left inside: 60%; Tire tread depth left outside: 60%; Tire tread depth right inside: 60%; Tire tread depth right outside: 60%; Brakes: Disc brakes; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Dual tires; Tire tread depth left inside: 60%; Tire tread depth left outside: 60%; Tire tread depth right inside: 60%; Tire tread depth right outside: 60%; Brakes: Disc brakes; Suspension: Air suspension Rear axle 3: Tire size: 285/70R19.5; Dual tires; Steered; Tire tread depth left inside: 40%; Tire tread depth left outside: 40%; Tire tread depth right inside: 40%; Tire tread depth right outside: 40%; Brakes: Drum brakes; Suspension: Air suspension Weights Unladen weight: 12,175 kg Payload: 23,825 kg GVW: 36,000 kg Financial Information Price: Upon request Identification Model number: R650 XT 6x4 - 8x4 / 100,000 kg / = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki We make every effort to provide accurate information. However, no rights can be derived from the information provided.