Used Big Bag Emptying Station for sale (12,267)

Condition: excellent (used), Bruton BIG T Dough divider Laodpfov Rgphex Al Nec Stainless, screw fed, with guillotine, variable speed, belt is 1200mm x 200mm, blade width 130mm, Production Rate Examples:; 2oz (56gms); Single Formation; Up to 1,800 per hour; Twin Formation; Up to 3,600 per hour; 4oz (113gms); Single Formation; Up to 1,800 per hour; Twin Formation; Up to 3,600 per hour; 11b (256gms); Single Formation; Up to 1,200 per hour; 8in (203mm); Quiche; Up to 1,200 per hour, mobile, 3Ph

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,105 h, load capacity: 10,000 kg, lifting height: 18,850 mm, fuel type: diesel, mast type: duplex, construction height: 10,795 mm, power: 168 kW (228.42 HP), empty load weight: 42,990 kg, drive type: Diesel, Empty Container Handler Load center: 1220 mm Mast type: Duplex Transmission: ZF WG211 automatic, 5/3 gears Condition: Operational and fully functional Technical condition: Very good Front tire size: 14.00-24 Front tire condition: 40 - 60% Rear tire size: 14.00-24 Rear tire condition: 40 - 60% ELME 584 sidespreader, 20ft-40ft, equipped with hooks and hydraulic clamp for double box lifting, +/-3° lateral tilt compensation, hydraulic sideshift +/- 600 mm Hydraulic, extendable spreader support on lifting frame, lift suspension via hydraulic accumulator, central lubrication system, automatic speed reduction depending on lift height, mast tilt, and if container(s) are clamped, engine preheater (230V), "one-touch" joystick function for automatic spreader adjustment (20'–40'), operator cab with air conditioning and sun blinds, air-suspended driver's seat with headrest and heating. Safety features: Lodpfx Alezd H Uao Noac - Hydraulic spreader support on lift mast (for container checker safety) - Lifting suspension by hydraulic accumulator - Central greasing system - Engine preheater (230V) - Air conditioning - Drive speed limitation depending on lifting height and mast tilt angle - One-touch joystick function for automatic spreader adjustment (20–40ft) - Air-suspended, heated driver's seat - Sun blinds at roof and rear windows Condition: inspected, repaired, serviced, and cleaned; ready for work.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 13,000 h, load capacity: 9,000 kg, lifting height: 16,332 mm, fuel type: diesel, mast type: duplex, power: 180 kW (244.73 HP), drive type: Diesel, Empty container handler Load centre: 1220 Mast type: Duplex Lsdpfezd H T Nox Al Neac Transmission: ZF 5WG211 automatic Condition: Ready for operation and fully functional Technical condition: very good Front tyres type: pneumatic Front tyres size: 14.00-24 Rear tyres type: pneumatic Rear tyres size: 14.00-24 20-40 spreader 584LF 6+1 high stacking

Condition: used, mileage: 657,129 km, power: 427 kW (580.56 HP), first registration: 03/2017, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x4, wheelbase: 3,100 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 12, emission class: euro6, suspension: steel-air, Year of construction: 2017, Equipment: air conditioning, electric window regulation, fridge, navigation system, Technical information Number of cylinders: 8 Lajdpfx Alszdz Twe Njc Engine capacity: 16.353 cc Drivetrain Drive: Wheel Make of engine: Scania Axle configuration Front axle: Tyre size: 385/65R22,5; Suspension: leaf suspension Rear axle 1: Tyre size: 315/80R22,5; Double wheels; Suspension: air suspension Rear axle 2: Tyre size: 315/80R22,5; Double wheels; Suspension: air suspension Weights Empty weight: 10.190 kg Carrying capacity: 15.810 kg GVW: 26.000 kg = Additional options and accessories = - PTO

Condition: used, Tapping and blowing kit Ledpfeci D Ucsx Al Nsac Manufacturer: Heinrich Huetz Safety system for drilling into house connections and for blowing lines up to DN 50 Numerous accessories available; additional images can be sent upon request. Packaged in metal boxes Includes operating instructions.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Lajdpfxjzbxwis Al Njc Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: new, functionality: fully functional, Features of the Unit 1. Chain conveyor belt, 2 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotative end sealing unit, double sealing jaw Lodpfx Aoydqahel Noac 5. Robust, central fin seal structure 6. Three servo-controlled drives 7. HMI control panel 8. Two individual temperature controllers 9. Housing made of 304 stainless steel 10. Documentation in the local language 11. Print mark control 12. Programmable bag length 13. Standard running direction: left to right Technical Specifications 1. Product length: L90–300 mm 2. Product width: W30–160 mm 3. Product height: H5–55 mm 4. Packaging speed: up to 125 products/min (depending on product, bag length, material, and number of sealing jaws) 5. Maximum film width: 370 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 6.5 kW 8. Machine weight: approx. 400 kg 9. Machine dimensions: approx. 3500 x 950 x 1450 mm

Condition: excellent (used), functionality: fully functional, Factory closure for mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Lodpfxjxqgffs Al Nsac

Condition: excellent (used), Assembly frame with rubber support Manufacturer: EDER + MÜLLER Height adjustable: 800 - 950 mm Work surface size: 1800 - 2800 mm diagonal Weight: 60 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Lajdpfxjzcqqqo Al Nec DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 1013, REF: MM6216 1 X Comek vertical form, fill and seal bagging machine with Zodiac HS screen Lajdpfx Aljxd Ubno Nsc Technical specification ⚙️ ✅ Manufacturer - Comek Automatic Packaging Solutions ✅ Model - VPB 330 EVO. ✅ Serial - 1013. ✅ Date of manufacture - 2019. ✅ Weight - 2,500 Kg ✅ Installed power - 10 Kw ✅ Sealing jaws - 330mm (horizontal) x 460mm (vertical). ✅ Overall dimensions - 2000mm long x 1500mm wide x 1800mm high. Note 🗒️ No printer.

Condition: excellent (used), mileage: 660,951 km, power: 427 kW (580.56 HP), first registration: 08/2016, fuel type: diesel, tire condition: 70 %, axle configuration: 6x4, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 7,500 mm, total width: 2,500 mm, total height: 3,800 mm, Year of construction: 2016, Equipment: ABS, air conditioning, differential lock, electric window regulation, fog lights, power mirror, retarder, = Additional options and accessories = - 1 fuel tank - 1 sleeping place - Airbag - Armrest - Front suspension: Leaf - Hub Reduction - Hydraulics - Night Heater - Open roof - PTO - Rear suspension: Air - Rotator - Sleeper cabin - Sper - Thick Axles - Toolbox = More information = Brakes: disc brakes Front axle: Steering; Tyre profile: 70%; Suspension: leaf suspension Rear axle 1: Double wheels; Differential lock; Tyre profile: 70%; Reduction: hub reduction; Suspension: air suspension Rear axle 2: Double wheels; Differential lock; Reduction: hub reduction; Suspension: air suspension Crane: TAJFUNLIV L300K Ledpfxozd S N Ns Al Nsac Technical condition: very good Visual appearance: very good

Condition: excellent (used), mileage: 538,898 km, power: 279 kW (379.33 HP), first registration: 03/2009, fuel type: diesel, tire condition: 50 %, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: semi-automatic, emission class: euro5, suspension: steel, total length: 8,500 mm, total width: 2,500 mm, total height: 3,500 mm, Year of construction: 2009, Equipment: ABS, air conditioning, crane, differential lock, electric window regulation, fog lights, = Additional options and accessories = - 1 fuel tank - Airbag - Armrest - Central lubrication - Day Cabin - Disc brakes - Front suspension: Leaf - Hub Reduction - Hydraulics - Open roof - PTO - Radio - Rear suspension: Leaf - Sper - Thick Axles - Tipping hydraulics = Remarks = Crane Number of hydraulic extensions: 2 Clamshell bucket: ✓ = More information = Technical information Number of cylinders: 6 Engine capacity: 11.705 cc Axle configuration Tyre profile: 50% Brakes: disc brakes Suspension: leaf suspension Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels; Differential lock; Reduction: hub reduction Rear axle 2: Double wheels; Differential lock; Reduction: hub reduction Functional Crane: HMF 1643, behind the cab Lasdezd S Hzopfx Al Njc Tipper: Left / Back Condition Technical condition: very good Visual appearance: very good

Condition: excellent (used), mileage: 332,493 km, power: 228 kW (309.99 HP), first registration: 11/1997, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: semi-automatic, emission class: euro2, suspension: steel-air, total length: 7,000 mm, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 1997, Equipment: ABS, air conditioning, differential lock, electric window regulation, fog lights, = Additional options and accessories = - 1 fuel tank - Airbag - Armrest - Day Cabin - Front suspension: Leaf - Hub Reduction - Hydraulics Lsdpfxozd S E Dj Al Nsac - Open roof - PTO - Rear suspension: Air - Sper - Thick Axles - Tipping hydraulics = More information = Tyre profile: 50% Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Reduction: hub reduction; Suspension: air suspension Technical condition: very good Visual appearance: very good

Condition: used, Year of construction: 2014, Overview This empty bottle inspector (EBI) was manufactured in 2014 by the German manufacturer Krones. The machine is designed for the inspection of empty glass bottles prior to filling in beverage production lines. It is still in production and will be professionally dismantled in early 2027 as the complete filling line will be replaced. Technical data Capacity: currently running at 18,500 bph, but can also work at significantly higher speeds. Formats: 0.75l bottle 0,5l bottle Application: Inspection of empty bottles prior to filling Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) Inspection systems:Base inspection (camera) Sealing surface inspection Thread inspection (conical optics) Mouth / finish inspection Sidewall inspection with LED illumination Detection of transparent films on bottle base and sidewall Scuffing detection via sidewall camera Residual liquid detection via infrared system and high-frequency detection Reject systems: Foreign container rejection at infeed Contaminated bottle rejection at discharge Separate rejection for bottles with damaged finish or thread Direction of operation: Left to right Laodpfx Aezb Afqsl Nsc

Condition: new, Lenze SDI CS 5810 TC Command Station SN:150356940002, unused in opened original packaging, 100% functional, delivery as per photos. Laedpfx Alox Et E Re Noc

Condition: new, Lenze SDI CS 5810 TC Command Station SN:150356890005, unused in opened original packaging, 100% functional, delivery as per photos. Laedsx Et E Dopfx Al Njc

Condition: new, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Lasdpfx Ajwv Tqbol Nsc Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: excellent (used), mileage: 674,535 km, power: 272 kW (369.82 HP), first registration: 05/1994, fuel type: diesel, tire condition: 50 %, axle configuration: 6x4, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 8,000 mm, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 1994, Equipment: ABS, differential lock, = Additional options and accessories = - 1 fuel tank - Armrest - Day Cabin - Front suspension: Leaf Lodpfszd A Agjx Al Nsac - Hub Reduction - Hydraulics - Open roof - PTO - Rear suspension: Leaf - Sper - Thick Axles - Tipping hydraulics = More information = Tyre profile: 50% Brakes: drum brakes Suspension: leaf suspension Front axle: Steering Rear axle 1: Double wheels; Differential lock; Reduction: hub reduction Rear axle 2: Double wheels; Differential lock; Reduction: hub reduction Technical condition: very good Visual appearance: very good

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 08/2027, machine/vehicle number: 2026, NEW NEW Bag/Pack Closure Machine NEW NEW Ljdpfx Aew S Slhsl Nsac Automatic and manual operation Clip band machine with date printing Stainless steel construction Single-person operation Packaging of baked goods such as bread, sliced bread, rolls, croissants, etc., as well as other food and non-food products Connection: 230V New device With warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Clip band Maintenance contract Service package Delivery service Training & commissioning Visit our large exhibition!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 1 x PFM flow wrapper with peg and chain infeed conveyor and painted mobile frame. Model - Swift. Lsdpfjy Unmujx Al Njac Serial - D.1294. Date of manufacture - 2011. The PFM Swift is a horizontal flow-wrap machine with rotary crimp jaws, designed to wrap at speeds of up to 100 bags per minute. An extremely versatile, compact and reliable machine, the Swift will accomodate a wide range of products, with its standard adjustable forming box, providing the solution to quick and efficient size changes. Adjustable folding box - up to 90mm wide. Can wrap using clear or printed film. Electrical requirements - 230 V / 50 hz / 1 phase. Power - 14.5 Amps / 3.1 kW. Overall dimensions - 4150mm long x 950mm wide x 1950mm high. Supplied without the adapted infeed system, will be back to the standard infeed system.

Condition: good (used), 1 used mold measuring station made by Perthen type MMQ40 Ser. no. 1114, Up to diameter 350 mm Workpiece length up to 450 mm Lodpfx Aljthdkws Njac For high-precision measurement of shape and position tolerances with PC, TFT monitor, keyboard, mouse, table, measuring software, form PC Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data!)

Condition: used, 1 HELLA GUTMANN MEGA COMPAA HG4 exhaust gas testing station with various accessories and a mobile testing unit Color: as shown in the pictures Condition: used Location of the goods: Hall 1 Ljdpozcl T Hefx Al Nsac Payment method: prepayment by bank transfer Shipping: self-collection only from the Hofgeismar location

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: SENFENG, laser type: fiber laser, laser source manufacturer: MAX, laser power: 1,200 W, laser wavelength: 1,080 nm, sheet thickness (max.): 12 mm, table length: 600 mm, table width: 600 mm, table height: 50 mm, working length: 600 mm, working width: 600 mm, working height: 50 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 50 mm, cutting speed: 500 mm/min, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, input voltage: 220 V, input frequency: 50 Hz, type of cooling: air, overall weight: 151 kg, total length: 1,110 mm, total width: 1,205 mm, total height: 775 mm, warranty duration: 12 months, Equipment: CE marking, cooling unit, dust extraction, emergency stop, fume extraction, SENFENG Tools D-Series – 7-in-1 Desktop Laser Workstation The SENFENG Tools D-Series is a compact, multifunctional laser workstation for workshops, small manufacturing companies, repair shops, creative studios, metalworking businesses, and professional users who want to combine multiple processing steps in a single system. The D-Series combines CNC laser cutting, CNC laser engraving, diode laser cutting, diode laser engraving, handheld laser welding, handheld laser cutting, and laser cleaning and rust removal. This reduces external processing costs, saves space, and expands production capabilities within the company. Depending on the configuration, the series is available with 800W or 1200W fiber laser power, as well as an optional diode laser. The dual-laser system enables the processing of both metals and non-metals: the fiber laser is designed for cutting, welding, and cleaning metals, while the blue diode laser can cut or engrave wood, acrylic, leather, and other non-metals. Key advantages: • 7-in-1 laser workstation for cutting, welding, cleaning, and engraving • Up to 1200W fiber laser power • Optional fiber laser and diode laser system • Max. cutting thickness: carbon steel up to 12 mm, wood up to 25 mm • CNC processing speed up to 500 mm/s • Repeat accuracy up to ±0.01 mm in Ultra-Cut models Lsdpfxezfhn Re Al Njac • Fully enclosed work area with integrated smoke extraction • Graphite protective plate with drawer design • Laser head change in approx. 30 seconds • Intelligent height following function, edge detection, and obstacle avoidance • Common edge cutting for better material utilization • Control via PC, mobile device, or touch panel Available variants include D300 and D600 Welder, D300 and D600 Combo, D300 and D600 Combo Pro, and D300 and D600 Ultra Cut. The D300 models are designed for compact workspaces, while the D600 models offer more power and a workspace of up to 600 × 600 mm. For handheld laser welding, the machine supports continuous welding, spot welding, and pendulum welding. Depending on the model, the welding thickness ranges from 0.2 to 4 mm or 0.2 to 5 mm. The air-cooled system is designed for flexible use in workshops and does not require extensive industrial infrastructure. The Combo and Combo Pro versions combine CNC automation with handheld processing. Users can flexibly switch between precise CNC processing and manual processing. Typical materials include stainless steel, carbon steel, aluminum, brass, galvanized steel, wood, acrylic, leather, and other suitable materials. The fully enclosed safety design creates a visible and protected work area. Emergency stop, smoke extraction, and a mechanical laser selection switch support safe and clean operation. Depending on the model and market version, the D-Series has CE, FDA, FCC, and other relevant certifications. Typical users include metalworking shops, automotive repair shops, custom fabrication studios, small-batch manufacturers, signage and engraving companies, wood and creative workshops, educational institutions, and teams for prototype construction and product development. The SENFENG Tools D-Series is a compact solution for users who want to handle more tasks internally with a single machine – from laser cutting to engraving, welding, and cleaning.

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Ljdpfx Asy Urtfel Nsac Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2000, loading space length: 13,410 mm, loading space width: 2,470 mm, loading space height: 2,630 mm, total length: 13,790 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 9,140 mm, color: red, Year of construction: 2000, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Rear axle 2: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Weights Empty weight: 10.760 kg Carrying capacity: 28.740 kg GVW: 39.500 kg Functional Make of bodywork: Jumbo Plywood Box Condition General condition: average Technical condition: average Lajdpszb Axqofx Al Nec Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL