Used Billet Shears for sale (1,541)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, working width: 4,050 mm, cutting angle (min.): 2 °, cutting angle (max.): 10 °, sheet thickness (max.): 8 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Sheet width: 4,050 mm Sheet thickness: 8 mm Cutting angle: 2 - 10° Cutting speed: 0.053 m/s Table length: 710 mm Electric back gauge: 1,000 mm Csdpfxoxxr H Rj Aflshf MACHINE DETAILS Machine weight: approx. 10,100 kg EQUIPMENT Support arms for material Sheet lifting device Scrap container Cutting gap and angle adjustment via the control system

Condition: excellent (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, cutting force: 630 t, power: 90 kW (122.37 HP), empty load weight: 36,500 kg, total width: 2,400 mm, total length: 9,500 mm, overall weight: 40,000 kg, cutting length (max.): 1,600 mm, year of last overhaul: 2024, type of input current: three-phase, operating pressure: 220 bar, Scrap shear MS-6300e (scrap shear with electric motor) without operating materials. A 250kW diesel generator can be offered separately. Model: MS-6300e Cutting force: 630t Cutting length: 1600mm Discharge height: 500mm Power: 110 KW Capacity: 12-17 t/h Machine weight: 40 tons (+ diesel generator 4 tons) Hopper size: 3850mm x 2600mm x 1500mm Information: A scrap shear is used for economical scrap cutting: - simple automatic operation - Energy-saving - Cost-saving - No foundation required Chsdpfx Afouu Upgjlef Function: Scrap is fed into the loading area with the aid of an excavator. Due to the horizontal filling area and the scrap's own weight, it falls down into the loading chamber and into the cutting area. The scrap is compacted at the front wall and cut by the horizontally moving tool pick-up side via the blades on the front wall. While the tool carrier carriage moves horizontally, the processed material is pushed out via the blades on the front wall of the container. When returning to the rear position, the loaded scrap moves into the interior of the shears under its own weight. The scrap shears are available in different versions depending on customer requirements and the output size can be selected (for new orders). Inspection and trial operation are possible.

Condition: ready for operation (used), sheet thickness steel (max.): 20 mm, back gauge: 1,000 mm, power: 30 kW (40.79 HP), total length: 3,400 mm, total width: 3,900 mm, total height: 2,800 mm, empty load weight: 22,300 kg, workpiece length (max.): 3,100 mm, passage width: 3,400 mm, throat depth: 300 mm, digital readout for backgauge retractable backgauge Optional: upgrade to CNC control Cjdpfjxpkilex Aflohf Strokes/min: 7 > 30 str/min Adjustable cuttingedge: 0,5 > 3°

Condition: new, Year of construction: 2025, – Capacity 1050 x 1.5 mm – Backgauge 600 mm – Table size 600 x 1315 mm Chsdpjxai Stjfx Afljf – Weight 350 kg

Condition: good (used), functionality: fully functional, Year of construction: 1978, Equipment: foot remote control, Performance data: Sectional steel shears: L-steel 90° cut 80 x 8 mm L-steel 45° cut 50 x 6 mm Section steel cutter: L-steel 90° cut 60 x 6 mm T-steel 90° cut 60 x 7 mm L + T steel 45° cut 50 x 6 mm Special knives: U-steel 80 mm I-steel 100 mm Flat steel 80 x 12/ 120 x 8 mm Round steel cutter: Round steel 28 mm Square steel 25 x 25 mm Flat steel shear 100 x 11/10 mm triangular notcher 8 mm strokes: 36 1/min drive: 2,2 kW weight: approx. 450Kg Chjdpfx Afjhx Ekpsljf Incl. base frame as shown All data without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 241 143, cutting length (max.): 3,600 mm, Veneer shears with one blade; length: 3.60 m Chedpfxewql N Se Aflsf

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, Darley hydraulic guillotine shear type GS 3116 working width 3050 mm max sheet thickness 16 mm Delem NC control type DAC 350 motorized backgauge automatic angle adjustment automatic cutting gap adjustment rear side equipped with transport conveyor Codpfx Afjxpuipsljhf

Condition: used, functionality: fully functional, Year of construction: 2004, Hydraulic Guillotine Shear Make: ERMAKSAN Model: HGS 3100x6 Year: 2004 Technical Data: Manufacturer: ERMAKSAN Model: HGS 3100x6 Year of Manufacture: 2004 Sheet Width: 3,100 mm Sheet Thickness: 6 mm Cutting Angle: 1.2° Strokes per Minute: 18 Number of Hold-Downs: 15 Motor Power: 11 kW Back Gauge: 1,000 mm Space Requirement: L 3.8 x W 2.2 (plus support arms) x H 1.6 m Machine Weight: 5.5 t Equipment: • Angular stop • Support arms • Programmable 1,000 mm back gauge via ELGO controller • Automatic blade gap adjustment • Pneumatic sheet support device • Cutting length limiter • Folding finger guard • Light barrier for rear area safety All information is provided without guarantee. Chjdpjxrtxujfx Aflsf A powered demonstration is available at any time in our showroom.

Condition: ready for operation (used), sheet thickness steel (max.): 20 mm, back gauge: 1,000 mm, power: 37 kW (50.31 HP), empty load weight: 37,000 kg, workpiece length (max.): 4,050 mm, passage width: 4,350 mm, throat depth: 300 mm, LVD MVCS 4050 x 20 mm Strokes/min: 5 > 20 str/min Adjustable cutting device: 0,1 > 1,9 Adjustable cuttingedge: 0,5 > 3° Chjdpfxoxpki Se Aflef

Condition: good (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 2076, Metallkraft Guillotine Shear MTBS 1540-40 B Electromotive guillotine shear with NC-controlled back gauge, LED cutting line illumination, and mobile foot control, heavy-duty version Working width: 1540 mm Cutting capacity at 400 N/mm²: 4.0 mm* Cutting capacity at 700 N/mm²: 2.5 mm* Back gauge: adjustable up to 750 mm Side gauge: 1000 mm | 90 degrees Material support: 2 support arms with T-slots Shear angle: 2.0 degrees Cuts per minute: 40 at full cutting length Blade gap adjustment: manual Motor power: 5.5 kW | 400 V – 50 Hz Dimensions (LxWxH): 2170 x 2160 x 1280 mm Weight (net): approx. 2200 kg Includes high-quality blades (also suitable for stainless steel), support arms with slots and tilting cams, side gauge, back gauge, and control console with foot switch Description Metallkraft Motorised Guillotine Shear MTBS 1540-40 B with NC-controlled Back Gauge Heavy and robust welded construction Upper beam guided in prisms with adjustable flat guides Manual blade gap adjustment at the front of the machine LED cutting line illumination and elongated holes in the upper cover for optimal view of the cutting edge and alignment for scribing Heavy-duty 90-degree side gauge with 1000 mm length, T-slot, tilting cam, and scale Two robust sheet support arms with T-slots and tilting cams Motorised and NC-controlled back gauge with 750 mm travel Back gauge drive equipped with frequency inverter, brake motor, and ball screw spindles High-quality, rotatable blades suitable for stainless steel cutting Heavy-duty hold-down beam with protective rubber inserts Rear area secured with a light curtain Operation via mobile foot pedal console with emergency stop Application For cutting steel sheet, non-ferrous metals, stainless steel sheets, and other materials The low blade angle ensures minimal twist and burr-free cutting Foot operation allows both hands free for material handling Scope of Delivery Metallkraft Motorised Guillotine Shear MTBS 1540-40 B NC-controlled back gauge with brake motor and ball screw spindles 1 side gauge with T-slot, tilting cam, and scale 2 sheet support arms with T-slots and tilting cams Mobile control console with foot switch Operating manual with spare parts documentation and CE declaration of conformity Codpsxximzofx Afljhf Optional Accessories / Factory-fitted Options Small parts flap with drawer for front ejection – max. 300 x 300 mm Pneumatic thin sheet holder Centralised lubrication with hand pump Extension of motorised back gauge from 750 mm to 1,000 mm Adjustable angle gauge 0 – 180 degrees Accessories: Includes movable feed table with ball rollers

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: Cybtouch 8, working width: 4,160 mm, sheet thickness (max.): 13 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, power: 30 kW (40.79 HP), control voltage: 480 V, overall weight: 16,850 kg, total length: 4,930 mm, total width: 3,160 mm, total height: 2,100 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Swing-Beam Guillotine Shear with Fixed Cutting Angle Max. cutting length: 4160 mm Max. sheet thickness: 13 mm (at 450 N/mm²) Cutting angle: 2 degrees Number of hold-downs: 19 units Motor power: 30 kW Cutting speed: 8 strokes/min Oil tank capacity: 400 l Machine length: 4930 mm Machine width (without support arms): 2345 mm Total width: 3160 mm Cjdoxyxxcepfx Aflshf Machine height: 2100 mm Machine weight: 16,850 kg Throat depth: 150 mm Standard Equipment: - CE-compliant safety equipment / Conformity - Manual central blade gap adjustment via handwheel - Cutting length adjustment via control panel - Support balls integrated into the table - Motorised, programmable backgauge, 1000 mm, operated via ball screw - Foldable finger guard up to 1000 mm - 1 x 1000 mm stop arm with scale, T-slot, tilting stop, and support balls - 2 x 1000 mm support arms with integrated balls - Cutting line illumination via shadow projection, LED lighting - Adjustable shadow line - High-quality top blades with 2 cutting edges - High-quality bottom blades with 4 cutting edges Features: - CNC control Cybelec Cybtouch 8 - Pneumatic sheet support device - Front finger guard via light curtain - CNC-controlled blade gap adjustment Service and spare parts supply provided by Viering Werkzeuge Maschinen GmbH. Additional Dener sheet metal working machines available on request.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, cutting force: 700 t, power: 300 kW (407.89 HP), empty load weight: 115,000 kg, total width: 3,000 mm, total length: 17,000 mm, total height: 4,000 mm, overall weight: 91,000 kg, cutting length (max.): 7,100 mm, year of last overhaul: 2024, pressure: 360 bar, Taurus K773.L1E Cutting force 700 tons Cutting width 950 mm ( blade 1000 mm ) Cutting height 650 mm Box 7100 mm rammer 900 kN Central lubrication system Included 300 kW drive power Revision 2024 (year of construction 2006) Chodpfxjuptmye Afljf Revision includes the following work: - Replacing the HARDOX carriage guides - Replacing the carbon guides on the blade carriage - Installation of new knife seats top/bottom - Installation of new blades and screws top/bottom - Welding on the worn parts in the scissor mouth - Dismantling of both covers, fitting new hinges, fitting new shafts, reassembly - Overhaul of all 4 HPR 160D pumps at LINDE Poland - Sealing the valves on the left/right valve bank - Installation of new piston rod feed (180 x 8.29 m) - Installation of new feed guide bushes incl. sealing package - Overlay welding of feed block and hold-down device, followed by milling to size - Inspection of side cylinders, in some cases installation of new seal packs, if required - Replacing piston rods and honing pipes - General repair work on hydraulic pipes, clamps, in some cases - Replacement of damaged hoses - General repair work on structure, covers and platform construction - Repainting of the system - Steel frame for mounting the machine Ready for immediate use. Available from December 2024 with repainting

Condition: like new (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: 171278, sheet thickness steel (max.): 2 mm, overall weight: 1,900 kg, total length: 1,780 mm, total width: 3,000 mm, total height: 1,240 mm, cutting length (max.): 2,550 mm, The machine was only used for commissioning. Mint condition Year of manufacture: 2022 SerNo.: 171278 Connected load: 4.2 kW Supply voltage: 400 VAC Motor power main drive: 4.0 kW Sheet thickness (max.) - 450 N/mm²: 0.8-2.0 mm Dimensions: 300 x 178 x 124 cm Chjdpfxovbwglj Afljf Weight: 1900 kg

Condition: used, Year of construction: 2001, - Year of manufacture: 2001 Specifications Chjdpfxoxa Aclj Aflef - Cutting length: 3100 mm - Capacity: 16 mm - Stroke: 170 mm - Strokes per minute: 10 - Oil tank: 410 l - Motor power: 37 kW - Operating voltage: 400 V - Rated current: 72 A - Main fuse rated current: 100 A - Dimensions (W x H x D): 3750 x 2400 x 3425 mm - Weight: 13800 kg

Condition: good (used), functionality: fully functional, Sheet width: 4050 mm Codpsxu Nc Iefx Aflohf Sheet thickness: 8 mm Cutting angle: 2 - 10° Cutting speed: 0.053 m/s Table length: 710 mm Machine weight approx.: 10,100 kg

Condition: excellent (used), Year of construction: 2014, actuation type: hydraulic, working width: 3,100 mm, stroke rate (min.): 13 1/min, sheet thickness (max.): 10 mm, table height: 800 mm, back gauge: 1,000 mm, power: 22 kW (29.91 HP), Equipment: CE marking, emergency stop, finger protection, foot remote control, safety light barrier, We hereby offer you a hydraulic swing beam shear of the brand "ERMAKSON", used, in very good condition. Chodpfx Asxvinmjflof Please feel free to contact us for a quote.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: Cybtouch 8, working width: 3,120 mm, sheet thickness (max.): 6 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, power: 11 kW (14.96 HP), control voltage: 480 V, total length: 3,840 mm, total width: 2,050 mm, total height: 1,700 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Swing Beam Guillotine Shear with Fixed Cutting Angle Maximum cutting length: 3,120 mm Maximum sheet thickness (at 450 N/mm²): 6 mm Cutting angle: 1.39 degrees Number of hold-downs: 15 pcs Motor power: 11 kW Cutting speed: 18 strokes/min Oil tank capacity: approx. 200 l Machine length: 3,840 mm Cedpfxexyxuqe Aflshf Machine width: 2,050 mm Overall width: 2,745 mm Machine height: 1,700 mm Machine weight: 8,800 kg Throat depth: 150 mm Standard equipment: - CE-compliant safety equipment / conformity - Maper control system with memory function - Manual central blade clearance adjustment / handwheel - Cutting length adjustment via the control panel - Worktable support balls - Motorized, programmable backgauge 1,000 mm, with ball screw drive - Swing-away finger guard, foldable at 1,000 mm - 1 pc 1,000 mm support arm with scale, T-slot, tilting stop, support balls - 2 pcs 1,000 mm support arms with integrated balls - Cutting line illumination by shadow line, LED light - High-quality upper blades with 2 cutting edges - High-quality lower blades with 4 cutting edges Option: CNC Control Cybelec CybTouch 8 G The powerful upgrade for all types of premium guillotine shears. - High-contrast touchscreen with vibrant colors - Clear display with all operator-relevant information - Intuitive and user-friendly interface - Complete program entry for parts within seconds CNC Blade Gap Adjustment Automatic blade gap setting by entering material data on the control panel

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, machine/vehicle number: 00034269-ERH, control type: NC control, actuation type: manual, working width: 2,100 mm, stroke rate (min.): 28 1/min, table height: 800 mm, back gauge: 1,000 mm, oil tank capacity: 150 l, overall weight: 4,250 kg, total length: 3,010 mm, total width: 2,410 mm, total height: 1,650 mm, number of support arms: 2, Equipment: documentation/manual, emergency stop, foot remote control, type plate available, Standard Equipment: - Upper and lower blades also suitable for stainless steel processing - Hydraulic blade gap adjustment - Upper blade with two cutting edges, special steel hardened - Lower blade with four cutting edges, special steel hardened - Blade gap adjustment device - NC-controlled backgauge with ball screw spindle - Cutting line illumination - Automatic hold-down system - CE safety features - Support arm with ruler and side stops - Support table with ball rollers - HGS-A control console - CybTouch 6 control with color touchscreen - Mobile operator pedestal with foot switch and emergency stop button - Operating manual / CE documentation TECHNICAL DATA: Cutting length: 2100 mm Cutting capacity (42 kg/mm²): 6 mm Cutting capacity (70 kg/mm²): 4 mm Blade gap min. / max.: 0.05 - 0.8 mm Strokes per minute: 28 Hold-downs: 11 units Hold-down pressure: 9 t Main drive motor power: 11 kW Backgauge motor power: 0.75 kW Backgauge adjustment range: 1000 mm Adjustment speed: 110 mm/s Cutting angle: 1.2° Table length: 2415 mm Support arms: 2 units Width without support arms: 2410 mm Transport width: 2100 mm Table height: 800 mm Oil tank capacity: 150 l Length: 3010 mm Width: 2410 mm Height: 1640 mm Weight: 4250 kg Chedpoxwvptofx Aflsf

Condition: good (used), functionality: fully functional, Year of construction: 1991, This high-performance swing beam guillotine shear RAS 83.30 with ELGO NC backgauge and pneumatic sheet support unit comes from first ownership. Cutting capacity: 3190 x 2.5 mm Drive power: 5.5 kW Machine weight: 2800 kg Includes pneumatic sheet support unit, ELGO NC backgauge, 1 left-side squaring arm, and 3 additional support arms. Csdpfx Asxmi Dpsflshf Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, sheet thickness: 4nuber of strokes: 60weight approx.: 3800messurements (LxWxH): 3560 x 1250 x 1300 Cedpfx Asrmbdceflshf

Condition: used, functionality: fully functional, Year of construction: 1991, Equipment: foot remote control, type plate available, Circular Shears Manufacturer: Prinzing Type: KSE 25/10 Year of Manufacture: 1991 -used- Chedpfx Aowmqdgsflof Thrust: 350 mm For sheet metal up to 2.5 mm Sheet thickness - Cutting gap 1.00 mm - 0.05 mm 1.50 mm - 0.10 mm 2.50 mm - 0.15 mm Includes additional replacement blades as shown. The machine can be tested/demonstrated on-site under power. All information is provided without guarantee. Subject to prior sale.

Condition: new, Year of construction: 2023, Field of application: Construction Empty weight: 500 kg CE mark: yes Reference number: 5 Csdpjq Ixt Aefx Afljhf Fits to following machines: 4~9ton excavator Delivery terms: CIF Working pressure: 190210 bar Production country: KR Please contact Ö. Inalkac for more information ASH-50H is a Mini Shear with hydraulic rotation. This model is suitable for excavator 4~9 ton. ASH-50H Shear is one of the models that we have on stock in our warehouse, located in The Netherlands. Please contact us for more details. scissors, scrap shear cisaille ścinanienożyczki tijeras škare olló nůžky saks tesouras foarfece Schere žirklės ножницы forbici

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: Cybtouch 8, working width: 3,120 mm, cutting angle (max.): 2 °, sheet thickness (max.): 10 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, power: 22 kW (29.91 HP), control voltage: 480 V, total length: 3,850 mm, total width: 2,745 mm, total height: 2,000 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Swing Beam Shear with Fixed Cutting Angle / Swing Cut Maximum cutting length: 3120 mm Maximum sheet thickness (at 450 N/mm²): 10 mm Cutting angle: 2 degrees Number of hold-downs: 15 units Motor power: 22 kW Cutting speed: 12 strokes/min Oil tank capacity: 200 l Chsdjxyw Icspfx Aflsf Machine length: 3850 mm Machine width: 2175 / 3060 mm with support arms Overall width: 2745 mm Machine height: 2000 mm Machine weight: 13,500 kg Throat depth: 150 mm Standard Equipment: • CE safety equipment / compliance • Maper control with memory function • Manual central blade gap adjustment via handwheel • Cutting length setting via control panel • Support balls integrated into the worktable • Motorized, programmable backgauge 1000 mm, with ball screw drive • 1000 mm hinged finger guard • 1 x 1000 mm squaring arm with scale, T-slot, tilting stop, and support balls • 2 x 1000 mm front support arms with integrated support balls • Cutting line illumination via shadow line, LED lighting • High-quality upper blades with 2 cutting edges • High-quality lower blades with 4 cutting edges Option: • CNC Control Cybelec CybTouch 8 G The powerful addition for all types of high-quality guillotine shears. • High-contrast touchscreen with vivid colors. • Clear display of all information required by the operator. • Intuitive and user-friendly operation. • Complete part programming in seconds. • CNC blade gap adjustment Automatic setting of the blade gap after input of material data via the control panel.

Condition: excellent (used), Year of construction: 1985, Cutting length 1030 mm Max. sheet thickness 2 mm Stroke rate approx. 67 / min Back stop 500 mm Table width 230 mm Working height 905 mm, can be lowered to 755 mm Motor power 3 kW Machine dimensions L x W x H 1550 x 1300 (without support arms) x 1250 mm Weight 850 kg Accessories / Special features: • Rear, manually adjustable rack and pinion stop with measuring tape, length 500 mm • Front safety cord, electrically secured • 1 side stop on the right • 1 support arm • Geared brake motor • The working height is currently 905 mm. This can be lowered by 150 mm to 755 mm, as the machine's feet have been raised. • Manual central oil lubrication • Electric foot switch We have rotated the two knives to a new cutting edge and readjusted them. Codsfpa Ihjpfx Aflohf Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1989, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut) Csdporu Un Hjfx Afljhf