Used Cnc Centre Usinage for sale (10,807)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, USED Taiwan Takisawa model EX-108 high performance 2-Axis CNC lathe. Serial Number CA11E80453 Year 2000. NOTE THIS IS A 2 AXIS MODEL EX108 NOT A 3 AXIS EX308. • Heavy Cast Iron Slant Bed Construction • Fanuc 21iT CNC Control • 4-Track Heavy Duty Linear Guideways • High Speed Servo Turret Pjdpfsuwc T Hsx Adiegw • Tool Setting Device • 8” 3-Jaw Hollow Spindle Hydraulic Chuck • Parts Counter • Toolholders included Max. Swing Over Bed - 400 MM Max. Swing Over Cross Slide - 320 MM Distance Between Centres - 645 MM Standard Turning Diameter - 216 MM Max. Turning Diameter - 320 MM Max. Turning Length - 530 MM Bar Capacity - 52 MM X-Axis Stroke - 180 MM Z-Axis Stroke - 530 MM Spindle Speeds - 60 – 4000 RPM Spindle Nose - A2 – 6 Spindle Bore - 63 MM Turret Type - 12 Station Tailstock Stroke - 435 MM Tailstock Quill Stroke - 100 MM Tailstock Quill Taper - 5 MT Rapid Traverse (X & Z) - 20 & 24 M/Min Jog Feed Rate (X & Z) - 0 – 1260 MM/Min Spindle Motor - 7.5 / 11 KW Electrics - 415V,3PH,50HZ Floor Space - 2240 MM X 1645MM Machine Weight - 4300 KGS

Condition: used, Year of construction: 2013, Goodway GS2600Y CNC Turning Centre with Fanuc Series 0i-TD CNC Control, 12 Position Tool Turret, Tailstock, 250mm Powered 3 Jaw Chuck, Spindle Speed 4000rpm, Filtermist FX4002 Oil Mist Extractor. Machine Weight 6700kg. S/No. 94E092 (2013) Pgodpfoxztkvjx Adisw Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2012, 750mm Swing, 500mm max. machining diameter, 1300mm max turning length, 3000rpm main spindle, 65mm bar capacity, 8,000rpm milling 20kW, C axis 0.001 degrees, Y axis - 90/+120mm, 40 station ATC, , milling speed 4,000rpm, 30kW spindle motors, FANUC 31i control, Pgedpexqyg Nsfx Adisw 3 Jaw Power Chuck, Swarf Conveyor, Coolant, tool setter, parts catcher, barfeed unit.

Condition: used, Year of construction: 2004, ECOCA SJ20MC 3 AXIS CNC TURNING CENTRE MAKE ECOCA, MADE IN TAIWAN MODEL SJ 20MC YEAR 2004 CONTROL FANUC 18-T MAX. TURNING DIA 170.0 mm MAX. TURNING LENGTH 300.0 mm SWING OVER BED 380.0 mm OVER CROSS SLIDE 225 MAX. SPINDLE SPEED 4,500 RPM POWER TOOL SPEED 4000 SPINDLE NOSE A-5 / A2-6 DRAW TUBE DIA 45 RAPID TRAVERSE RATE X24 / Z24 PLUS VDI20 TOOLING PARTS CATCHER Pgedpfx Adetvav Ijijw SWARF CONVEYOR POWER TAIL STOCK TURRET TOOLING

Condition: ready for operation (used), Year of construction: 2020, operating hours: 30 h, General Data Machine weight 640 kg Measurements height 1860 mm Measurements depth 1100 mm Podpexy Apxofx Adiegw Movement Z-Axis Movement 222 mm Y-Axis Movement 56 mm Main Drive Number of axis 3 This 3-axis MECO MEC-55 CNC keyseating machine was manufactured in 2020, featuring a robust design with a maximum sample diameter of 400 mm and a total working area of 220 mm. It includes automatic Z and Y axes with speeds up to 9 m/min and 1.8 m/min respectively, and a manual W axis with a 360º rotation capability. If you are looking to get high-quality milling capabilities consider the MECO MEC-55 CNC machine we have for sale. Contact us for more information. Application Types Milling

Condition: like new (used), Year of construction: 2011, functionality: fully functional, turning length: 1,090 mm, spindle speed (min.): 4,500 rpm, travel distance X-axis: 455 mm, travel distance Z-axis: 1,090 mm, spindle nose: A 2-6, CNC Turning Milling Centre with 2nd spindle and lower turret Control Fanuc 31i Model A Turning diameter 170 / 245 mm Turning length 1090 mm Spindle bore diameter 71 / 51 mm Spindle nose A 2-6 Spindle nose sub spindle A 2-5 Turning speed 4.500 R/min Turning speed sub spindle 6.000 R/min Milling head speed 12.000 R/min Movement X-axis 455 mm Movement Y-axis +70/-70 mm Movement Z-axis 1090 mm B-Axis travel 230° C-Axis indexing 0,001° Tool Taper Capto C6 Tools in tool magazine 40 Bar feeder: LNS Alpha SL65 Podpfjxxlplox Adisgw If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2005, functionality: fully functional, USED Takisawa Taiwan model EX-308 3-Axis slant bed universal CNC lathe with Fanuc 21i-T control. Year 2005 CF03E30096 Heavy Cast Iron Construction High Performance 4 Track Linear Guideways Fanuc 21iT CNC Control 12 Station Heavy Duty, High Speed Servo Turret with Driven Tools Built in Oil Cooled Spindle Motor with Full C-Axis Programmable Tailstock Quill 8” 3-Jaw Hollow Spindle Hydraulic Chuck Podeuwn Dkopfx Adiogw Tooling Package including two driven tool holders Swing Over Bed - 450 mm Distance Between Centres - 645 mm Max. Turning Diameter - 260 mm Max. Turning Length - 530 mm Bar Capacity - 52 mm X Axis Stroke - 180 mm Z Axis Stroke - 530 mm Spindle Speeds - 30 To 4000 RPM Number Of Turret Stations - 12 Number Of Driven Stations - 12 Driven Tool Speeds - 40 To 4000 Rpm Driven Tool Motor - 1.1/3.7 kW Tailstock Travel - 435 mm Tailstock Quill Travel - 100 mm Rapid Traverse Rates (X/Z) - 20/24 M/Min Main Spindle Motor - 11/18 kW Floor Space - 2360 X 1745 mm Machine Weight - 4300 Kgs Electrics - 415 V, 3 Ph, 50 Hz

Condition: used, Year of construction: 2006, Mazak Quick Turn Nexus 350m CNC Turning Centre with Mazatrol 640T Nexus CNC Control, Max Swing 750mm Diameter, Standard Machining Diameter 336mm, Max Machining Diameter 420mm, Bar Work Capacity 102mm, Spindle Speeds Max 4000rpm, 12 Tool Turret, Kitagawa Powered 3 Jaw Chuck, Tailstock, Filtermist FX4002 Oil Mist Extractor, Machine Weight 7500kg. S/No. 184642 (2006) Includes Various Tool Holders in Turret, Driven Tool Holders and Sleeves Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Pedjxzth Uopfx Adijgw

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 3104593, MACHINE SPECIFICATION Swing over front apron 806mm Swing over cross slide 527mm Pgsdpsxw Ubujfx Adiew Maximum cutting diameter 254mm Maximum cutting length 533mm Spindle nose A2-6 Spindle bore 88.9mm Bar capacity 51mm Maximum spindle speed 5000rpm Spindle motor power 22.4kW Number of turret tool stations 24 X axis travel 236mm Y axis travel +/- 50.8mm Z axis travel 533mm Rapid traverse X axis 24m/min Rapid traverse Y axis 12.7m/min Rapid traverse Z axis 30.5m/min Approximate Weight 6850Kg MACHINE EQUIPPED WITH Haas CNC control system 3 jaw chuck 210mm diameter Live tooling with C axis Y axis Tool presetter Parts catcher Hydraulic tailstock Haas magazine barfeeder 2 off axial driven toolholders 2 off radial driven toolholders 3 off assorted static VDI toolholders 20 off bolt on static toolholders Swarf conveyor Filtermist extraction Rotating centre Cabinet full of assorted tooling and chuck jaws Interlocked guarding Automatic lubrication system Coolant system Manual

Condition: good (used), Year of construction: 1999, operating hours: 1,887 h, functionality: fully functional, machine/vehicle number: 142031, spindle speed (max.): 5,000 rpm, Mazak Super Quickturn 200 (1999). Serial Number: 142031. Date: 1999. Weight: 5000kg/11,000lbs. Mazak tooleye measuring system. Tailstock. Swarf Conveyor. Parts Catcher. 12 Station Turret. Mazatrol PC-Fusion- CNC 640T control panel. Main Spindle Max 5000RPM. Collet Chucks and Collets. Hydrafeed barfeeder NOT included. This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs. Pgodpfx Aotz A Dfedijw

Year of construction: 2015, condition: ready for operation (used), This 4-axis HOMAG BMG311 VENTURE316L was manufactured in 2014. It features a rack and pinion drive for X and Y axes, ball screw for Z axis, and a maximum travel speed of 70 m/min. The machine can handle workpiece lengths up to 4200 mm and widths up to 1400 mm. It includes a console table with vacuum clamps and an Easyedge gluing unit. If you are looking to get high-quality woodworking capabilities consider the HOMAG BMG311 VENTURE316L machine we have for sale. Contact us for more information. Application Types Pgedpfxoxxniuo Adiew CNC Wood Machining

Condition: good (used), Year of construction: 2004, Ref. -No.: 10387 Manufacturer: MATEC Type: 30 L / 6000 Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 6000 mm Pjdjxvw E Hjpfx Adiogw Y-Travel: 800 mm Z-Travel: 600 mm Spindle Taper: SK 50 Table Load: 3000 kg Max. Workpiece Weight: 800 kg Spindle Speed: 20 - 9000 RPM Max. Torque: 165 Nm Main Drive: 60 kW Weight Of The Machine Ca.: 24 t

Condition: used, Year of construction: 2005, functionality: fully functional, USED Takisawa Taiwan model EX-308 3-Axis slant bed universal CNC lathe with Fanuc 21i-T control. Serial number CF02E30091 Year 2005 Heavy Cast Iron Construction High Performance 4 Track Linear Guideways Fanuc 21iT CNC Control 12 Station Heavy Duty, High Speed Servo Turret with Driven Tools Built in Oil Cooled Spindle Motor with Full C-Axis Programmable Tailstock Quill 8” 3-Jaw Hollow Spindle Hydraulic Chuck Tooling Package including two driven tool holders Pgsdpfeuwdg Usx Adijw Swing Over Bed - 450 MM Distance Between Centres - 645 MM Max. Turning Diameter - 260 MM Max. Turning Length - 530 MM Bar Capacity - 52 MM X Axis Stroke - 180 MM Z Axis Stroke - 530 MM Spindle Speeds - 30 To 4000 RPM Number Of Turret Stations - 12 Number Of Driven Stations - 12 Driven Tool Speeds - 40 To 4000 RPM Driven Tool Motor - 1.1/3.7 KW Tailstock Travel - 435 MM Tailstock Quill Travel - 100 MM Rapid Traverse Rates (X/Z) - 20/24 M/Min Main Spindle Motor - 11/18 KW Floor Space - 2360 X 1745 MM Machine Weight - 4300 KGS

Condition: excellent (used), Year of construction: 2014, operating hours: 11,200 h, functionality: fully functional, spindle motor power: 28 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, type of input current: three-phase, torque: 479 Nm, workpiece weight (max.): 5,700 kg, total height: 3,155 mm, total length: 6,760 mm, total width: 4,060 mm, overall weight: 15,500 kg, tool length: 250 mm, Equipment: documentation/manual, Soraluce TAA25 milling machine from 2014 with HEIDENHAIN TNC530 CNC. In 2024: hydraulic unit replaced and complete retrofit of head and spindle. Travels X/Y/Z [mm]: 2,500 x 1,000 x 1,000. Table [mm]: 2,700 x 850. Head indexing [°]: 2.5 x 2.5. Spindle speed [rpm]: 4,000. Power and torque [kW - Nm] S1: 28 - 479. Tool magazine: 20 positions – ISO 50. Psdpfx Aexwna Rodisgw

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1064590, SPECIFICATION Travel X axis stroke 1270mm Pjdpfx Adewy Uy Eoiegw Y axis stroke 508mm Z axis stroke 635mm Distance spindle nose to table 102-737mm Table Width 457mm Length 1321mm Max. Weight on table 1588kg T Slots : width 16mm : pitch 80mm   SPECIFICATION Cont’d Spindle Taper size No.40 Speed 0-7500rpm Bearings Bearing lubrication Air/oil injection Cooling Liquid cooled Motor Spindle motor, max. rating 14.9kW Feedrate Rapid X, Y & Z axis 18m/min Max. Cutting feedrate 12.7m/min Toolchanger Capacity 20 tools Type BT40 General Approximate machine weight 6033kg Air supply (min) 113lpm, 6.9 bar MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control system Programmable coolant nozzle Automatic lubrication system Enclosed guarding Swarf auger Lighting

Condition: used, Year of construction: 2006, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: Haas, total height: 2,750 mm, total length: 2,250 mm, total width: 2,360 mm, table width: 914 mm, table length: 356 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control Haas CNC Table size 914 x 356 mm Table load 680 kg Number of pallets: 1 x Movement X-axis 762 mm Movement Y-axis 406 mm Movement Z-axis 508 mm Spindle taper DIN 68971A Pedpfx Adjxnm A Ejiogw Spindle speed 12.000 1/min Spindle motor 22,4kW Magazin capacity 24 + 1 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2007, condition: ready for operation (used), Main Drive Spindle speed range 18000 Number of axis 3 Movement X-Axis Movement 3400 mm X-Axis Rapid Traverse 80 m/min Y-Axis Movement 1720 mm Pjdpfxow U E N So Adisgw Y-Axis Rapid Traverse 55 m/min Z-Axis Movement 400 mm Z-Axis Rapid Traverse 25 m/min Additional Equipment Vacuum Pump: 90 m³/h This 3-axis SCM Record 125 N CNC Wood Machining Centre was manufactured in 2007. It features a robust 7.5 kW electrospindle reaching up to 18,000 rpm, and an automatic tool changer with 8 positions. The working area extends to 3400 x 1720 x 400 mm, supported by a vacuum pump of 90 m³/h. If you are looking to get high-quality milling capabilities, consider the SCM Record 125 N machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: ready for operation (used), Year of construction: 2005, Offered is a Geiss 5-axis CNC milling machine. Travel ranges X/Y/Z/B/C 3000mm/1200mm/750mm/365°/520°, spindle GEISS ER45, max. speed: 40000rpm, power: 6kW, total weight approx. 5000kg, dimensions X/Y/Z approx. 6000mm/3700mm/2700mm. The machine is equipped with a detachable noise protection enclosure. Viewing by appointment possible. Pgjdpfoxxbagjx Adijw

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840 Dsl Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2013 Control system:Siemens 840 Dsl Turning length:1,185 Swing diameter:540 mm Bar capacity:75 Main spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush Sub spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush + flush through spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on traveling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:Capto C6 X-axis:450 mm Y-axis:200 mm Z-axis:1,200 mm B-axis:+/- 110° Position sensors:Direct scales (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Automation: Technology:Portal loader with stacking magazine Pedexl Nfqopfx Adisgw Workpiece diameter:50 - 200 mm Max. workpiece height:230 mm Max. workpiece weight:15 kg Number of stacking attachments:20 Max. load capacity per stacking attachment:40 kg Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Tool magazine:Chain magazine, 120 stations Workpiece measurement:Renishaw touch probe Tool breakage monitoring:Swivel wire Automation:Portal loader with stacking magazine Emulsion mist separator:Mechanical Setup operation:Electronic handwheel Workspace door:Automatic Chuck:2x SMW KNCS 260 Tool holders:Various Capto C6 holders

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 855 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 90 m/min, nominal power (apparent): 42 kVA, total length: 5,680 mm, total width: 3,170 mm, table load: 400 kg, rotary table diameter: 570 mm, overall weight: 15,300 kg, spindle speed (max.): 21,000 rpm, spindle nose: HSK-A63, tool length: 365 mm, tool diameter: 170 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, CNC Machining center GROB G350 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2018 CNC control: SIEMENS 840D sl Number of simultaneous axes: 5 Stroke X axis: 600 [mm] Stroke Y axis: 855 [mm] Stroke Z axis: 750 [mm] Rapid traverse rate X axis: 70000 [mm/min] Rapid traverse rate Y axis: 45000 [mm/min] Rapid traverse rate Z axis: 90000 [mm/min] Max. load on table: 400 [Kg] Psdjxt El Njpfx Adiegw Stroke A axis : swiveling area of rotary table: -185 / +45 [°] B axis swivelling stroke: 360 [°] Table surface Ø: 570 [mm] Spindle type: HSK-A63 Max. spindle speed: 21000 [rpm] Spindle power: 39 [kW] Tool changer magazin number of stations: 60 Max. tool length: 365 [mm] Max. weight of single tool: 8 [Kg] Max. tool diameter: 170 [mm] Rated current: 61 [A] Total power required: 42 [kVA] Supply voltage: 400 [V] Machine dimensions: 5680 x 3170 [mm] Weight: 15300 [Kg] EQUIPMENT INCLUDED: x1 Renishaw OMP60 part probe x1 High pressure coolant pump IKZ: 10–80 [bar] x1 Coolant chiller with air-cooled refrigeration unit: 13 [kW] x1 GROB spindle diagnostics (GSD) software option x1 Tool cleaning device x1 Decentralized work area mist collecting system x1 Automatic door setup x1 Chip conveyor x1 Interface for pallet changer x1 Oil skimmer for waste oil collection Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, Axa, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, but also CNC milling, drilling and tapping machines, as well as CNC grinding machines.

Condition: used, Year of construction: 2021, travel distance X-axis: 1,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 740 mm, controller manufacturer: Fanuc, controller model: Series 0i-MF Plus, workpiece diameter (max.): 800 mm, total height: 3,435 mm, total length: 5,575 mm, total width: 4,621 mm, overall weight: 18,000 kg, Equipment: documentation/manual, CNC 5-axis Vertical machining Centre CNC Control Fanuc Series 0i - MF Plus Table size Ø 800 mm Number of pallets 1 Maximum workpiece dia x height Ø 1200 x 300 mm Pgedpfx Adoxnmhnoijw Movement X-Y-Z-axis 1600 x 700 x 400/740 mm C-Axis (table rotation) 360° B-Axis travel -11 /+30 ° Spindle speed 15.000 r/min Spindle Taper Big Plus BT40 Spindle motor 18,5/15 kW Magazin Capacity 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2020, condition: ready for operation (used), Main Drive Number of axis 3 Spindle Speed 18000 RPM Spindle motor power 5.6 kW Movement X-Axis Movement 3350 mm Podexy Anhepfx Adijgw Z-Axis Movement 180 mm Y-Axis Movement 200 mm This 3-axis COMEC MD TOP XL CNC Wood Machining Centre was manufactured in 2020. It features a robust mono-block structure, high-speed axes positioning up to 70 m/min, and versatile electro-spindles for drilling, milling, and cutting. The machine includes a CAD-CAM control unit with a 17" touchscreen and full safety enclosures. If you are looking to get high-quality woodworking capabilities, consider the COMEC MD TOP XL machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: used, Year of construction: 2006, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: Mazatrol, controller model: 640 M, total height: 2,700 mm, total length: 3,445 mm, total width: 3,301 mm, table width: 1,300 mm, table length: 550 mm, overall weight: 8,900 kg, spindle speed (min.): 25 rpm, spindle speed (max.): 6,000 rpm, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control: Mazatrol 640M Psdexnklwepfx Adijgw Table size: 1300 x 550 mm Table load: 1500 kg Movement X-Axis: 1050 mm Movement Y-Axis: 510 mm Movement Z-Axis: 560 mm Spindle taper: MAS BT 50 Spindle speed: 25 -6000 1/min. Magazine capacity: 30 positions Weight of the machine: 8900 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2022, condition: ready for operation (used), General Data Machine weight 3700 kg Main Drive Spindle speed range 24000 Spindle motor power 8.5 kW Number of axis 3 Movement X-Axis Rapid Traverse 80 m/min Y-Axis Rapid Traverse 80 m/min Z-Axis Movement 250 mm Z-Axis Rapid Traverse 12 m/min Tools Type of tool holder HSK 63F Additional Equipment Remote Control Pendant Z-axis Tool Length Sensor 4 Vacuum Suction Cups // 4 Additional Positioning Pins (long) Automatic Dust Shoe Height Adjustment // Automatic Part Pushing System Receiving Table for Finished Parts (2800 x 2070 mm) Loading Table (2800 x 2100 mm, 2000 kg Capacity, 500 mm Stack) CNC Control System TPA – WSCM Straight-line Nesting Software (Included) Pneumatic and Electrical Preparation for Drill Head Upgrades ECO Mode for Energy Saving This 3-axis INFOTEC 3121 PRO EVO was manufactured in 2022. It features a working area of 2200 x 3100 mm, Z-axis travel up to 350 mm, and a high-speed main spindle with a power of 8.5 kW and speed range up to 24,000 RPM. Equipped with a 14-position tool magazine and a robust vacuum table with 6 zones. Ideal for advanced CNC wood machining. Contact us for more information about this machine. Application Types CNC Wood Machining Podpfx Aexxduysdijgw

Year of construction: 2024, condition: ready for operation (used), Main Drive Number of axis 3 This 3-axis COMEC MD JAM CNC Wood Machining Centre was manufactured in 2024. Consider the opportunity to buy this COMEC MD JAM CNC Wood Machining Centre. Contact us for more information. Application Types Pgodoxpyr Njpfx Adisw CNC Wood Machining