Used Biscuit Packing for sale (2,887)

Condition: used, Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 3016, film width: 780 mm, filling weight (max.): 20,000 g, filling weight (min.): 1,000 g, product height (min.): 100 mm, RADPAK RM-55AI bulk product packaging line – a complete installation For sale, a complete and fully functional bulk product packaging line for products such as: - pellets, - anthracite coal, - granulated fertilizers, - aggregates, - and other bulk materials. The machine enables the packaging of products into plastic bags weighing from 1 to 20 kg. It supports: - simple bags, - bags with a gusset, - bags with a top handle. The line consists of: - RADPAK RM-55AI packaging machine, - RW-04 weighing dispenser, - RC-50 take-off conveyor, - frame with an operating platform, - filling hopper with a bucket elevator, - dust extraction system (2 filters), - screw compressor, - compressed air storage tank, - compressed air dryer. Technical data Manufacturer: RADPAK Sp. z o.o., Włocławek Year of manufacture: 2018 Electrical power supply: 3 × 400 V AC + N + PE, 50 Hz Pneumatic power supply: 0.55–0.60 MPa Factory serial numbers: Packaging machine RM-55AI – no. 3016 Weighing dispenser RW-04 – no. 2093 Gkedpfx Asz T Ahmskhod Take-off conveyor RC-50 – no. 3018

Condition: used, Year of construction: 2009, Overview This Twin Pack MDEL-S handle applicator, built in 2009, applies carry handles to beverage multipacks. It produced multipacks in several configurations, from 2x3 and 3x4 packs of 0.5 l bottles to 2x3 packs of 0.75 l and 1.5 l bottles, and runs on pre-spooled handle tape rolls. The machine was taken out of production in October 2026 when the line was replaced, and it is dismantled and ready for transport. Technical data - Manufacturer: Twin Pack (Italy) - Model: MDEL-S - Year of manufacture: 2009 - Machine type: handle applicator for beverage multipacks - Formats: 2x3 x 0.5 l, 3x4 x 0.5 l, 2x3 x 0.75 l, 2x3 x 1.5 l Gjdpfx As Ahzarokhokd - Handle material: pre-spooled handle tape rolls - Control: Siemens SIMATIC touch panel - Suitable for: water, soft drinks and beer Equipment - Handle application unit in a guarded frame with transparent doors and signal tower - Pack infeed conveyor with guide rails and perforated safety guard - Separate tape unit with reel holders and push-button station with emergency stop - Operator panel on a swivel arm with key switch and emergency stop Condition Very good condition. Dismantled after the line change in October 2026 and stored. Availability Available immediately. Location: Serbia.

Condition: used, 160 Liter Hydraulic Power Unit, Rexroth Hydraulic Power Pack, Used machine Gsds Ai Ebxepfx Akhjkd Manufacturer: Bosch Rexroth Schweiz AG Type / Drawing No.: 057-ABPTA-K742-0-4-A Machine No.: 100793 Order No.: 35/25008064 Tank capacity: 160 liters Electric motor: Siemens 1AV3094B (1LE10030EB422FB4), 1.50 kW (400 V / 50 Hz, 1445 RPM, IE3) Heat exchanger: Funke TPL 00-K-8-22 (max. 30 bar) Valves: Bosch Rexroth (ZDR 6 DP2-43/75YM, HSZ 06 A604-32/M00, ZDBK 6 VP2-11/100V) Overall dimensions: - Length x Width x Height: 830 x 750 x 1040 mm

Condition: used, Year of construction: 2006, functionality: fully functional, Selling a Greefa large-crate unloader, model HD 1211, in very good condition. Photos available via app. Please inquire. Gedpfozfx E Hex Akhekd Also have an AWETA sorting machine for apples, potatoes, etc. with size adjustment and mechanical operation. Other machines are also available; please contact me if you are interested.

Condition: not inspected (used), Pouch making machine for liquids, hot or cold fill. Ideal for packing Soups, Sauces, Condiments (Ketchup, Mustard, Mayonnaise), Salad Dressing, Tomato Based Products (Pizza Sauce, Spaghetti Sauce), Liquid Eggs. We have two identical machines here from the same sauce factory. Many other machines including kettles, sauce coolers, glycol chillers etc. Gkodpfxsig Ht Is Akhod

Condition: good (used), Year of construction: 2007, For sale full packing system, Multihead ( 10 scales) Packing machine Gkodpfx Akek R T Uvehed Conveyor for packaged products.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, NET WEIGHING FILLING SYSTEM TYPE TOPLINE 1200 Reaching hourly capacities of 1200 bags (ONE THOUSAND TWO HUNDRED BAGS/HOUR), the TOPLINE has been designed to meet the requirements of high-speed filling of open mouth bags. In combination with our high-capacity NET WEIGHER, the TOPLINE 1200 is the perfect machine for fully automatic filling of granulated products. The bags are singled and opened by rotating grid singling system. After filling through flap-filling spout, the bags are transferred to the bag closing system by upper belt guiding. For clean and dust-reduced transport of the bags, the bags are kept shut until they reach the bag closing system. The machine was purchased directly from Behn + Bates in 2023 used for about months. The machines construction is 2015-17 but was UNUSED/NEW idle at another customer and returned to Behn + Bates. In the Year 2023, the nearly new machine was fully upgraded to current and latest technology at Behn + Bates factory in Germany then put in production in France. New machine costs EUR 400,000+ with 9-18 months lead time. This is a great opportunity to buy at discounted price and available immediately! Video in operation available upon request. Machine Technical Data: - Electric power 17 kW - Compressed air 160 ltr./bag plus 18 m³/h at 5 bar overpressure - Dedusting air 1.750 m³/h at 10 mbar under pressure - Weighing range 10 - 52 kg adjustable in 50 gm steps - Operation 1 person for the operation of the plant and for manual supply of the bags into the magazine - Output up to 1,200 bags/h Bag - Product Specifications: - Bag type flat open mouth bags AND gusseted open mouth bags - Flat Open Mouth Bag width 400 mm – 600 mm & Bag length 550 mm – 1000 mm - Gusseted Open Mouth Bags 380 mm – 600 mm (min. 320 mm between gussets) & Bag Length 550 mm – 1000 mm - Product examples crystal sugar, rice & grain, seed, dehydrated vegetables, animal feed & pet food, etc. Characteristics
Diagnosis and functional test of the inputs and outputs
Touch panel with integrated troubleshooting
Electronic weighing system MEC
Dosing time regulator
Product contacting parts made of stainless steel
Central dedusting connections
Empty bag magazine with space for 5 bag bundles
Rotating grid singling system
Bag singling and opening by vacuum
Radial inlet flap with servo drive
Double bottom flaps
Three load cells
Flap-filling spout with internal deaeration
Liftable bag bottom vibrator
Full bag transfer by upper belt guiding Your benefits
High capacity
High weighing accuracy
Easy cleaning
Compact filling system
Easy palletizing due to perfectly shaped bag bottom
High filling degree and good product compaction due to bag vibrator
Intermittent bag transfer at the top of the bag = bags kept shut Gkodpfoyah R Ajx Akhjd
Integrated electric control panel = quick assembly
Clean packaging area due to the encapsulated system
Lockable inspection doors on both the weigher and flap inlet
Easy product change

Condition: used, functionality: unexamined, Our company is offering an automatic packaging and feeding machine from Mengozzi (Mingozzi Packaging Team) for sale from company inventory. The machine is part of an industrial packaging line and is equipped with an indexing rotary table with mechanical feeding and positioning units. It is typically used for separating, feeding, and positioning products for downstream packaging processes (e.g., trays, blisters, or cartons). Features / Specifications: - Rotary table/indexing machine - Mechanical gripper and guiding units - Product feed via hopper - Fully enclosed safety housing - Industrial-grade construction Condition: - Pre-owned unit Gsdpfx Aoy Enlxokhskd - Out of operation for an extended period - Functionality not tested - Completeness cannot be guaranteed - Sold as-is / as inspected Note: Due to its specific design, the machine is particularly suitable for specialist companies for overhaul, adaptation, or parts recovery. Sales conditions: Company sale – without warranty, guarantee or return Sold EXW (Ex Works), collection by buyer

Condition: like new (used), Year of construction: 2022, operating hours: 20 h, functionality: fully functional, machine/vehicle number: GDS80KYT202S, type of input current: three-phase, total length: 2,100 mm, total height: 1,520 mm, total width: 1,500 mm, film width: 300 mm, product height (max.): 400 mm, product height (min.): 120 mm, We offer for sale a machine for packaging products into doypack-type bags, in very good technical condition, with a maximum of 20 operating hours. The machine was manufactured on November 23, 2022. The set includes a bucket conveyor that automatically measures the product portion, dispenses it into buckets, transports the product upwards, and empties it into an open bag. The bag is then transported further and automatically sealed. Range of supported packaging dimensions: length: from 120 mm to 400 mm width: from 150 mm to 300 mm The machine is fully functional, ready for operation, and ideal for the production of food products, powders, granules, and many other applications. Gjdpfx Aszd Ry Hskhokd Inspection on-site is possible.

Condition: excellent (used), Year of construction: 2023, Complete Robatech hot melt adhesive system for a folding and gluing machine, consisting of 3 guns, fully overhauled in May 2026. Gkodpfx Aszlal Uekhod

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: h288 di, power of vacuum pump: 11 W, overall weight: 4,900 kg, PRICE REDUCED: €29,000 → €25,000 (excluding VAT) – machine available immediately Resta automatic mattress packaging machine: integrated compression and decompression The Resta mattress packaging machine is an automatic packaging machine dedicated to the industrial packaging of mattresses. In practice, on your production line, this machine performs double packaging with compression and then decompression of the mattress, while protecting it in a suitable film. Advantages of mattress packaging in production and distribution First and foremost, an efficient mattress packaging machine reduces transport volume by 70 to 80%. The mattress remains compressed during transit and then returns to its original shape upon arrival. In practice, you save storage space and reduce logistics costs. Automated compression: mattresses packaged in PVC or plastic film, without manual intervention Easy decompression: the mattress returns to its normal shape in the store or at the customer's location Optimized transport: significant reduction in volume, with more space in the truck and in storage Preparation for sale: final presentation of the mattress in appropriate commercial conditions Vacuum packaging machine: protection and transport of the mattress What really changes in production is material compatibility. The Resta mattress packaging machine adapts to different types of mattress films, PVC film or plastic film, and ensures a hermetic seal. The fully automatic packaging process avoids manual handling, limits the risk of tearing, and maintains consistent quality. Compatible with spring and foam mattresses Ideal when your production mixes spring and foam mattresses. This packaging machine handles both types without major reconfiguration. The equipment handles both bagged mattresses and compressible structures equally well, simplifying workshop organization. Spring mattresses: compression without damaging the springs, thanks to a progressive hydraulic system Foam mattresses: adaptation specific to the product, with rapid shape recovery after compression Compatible with PVC film and other specialized packaging films Professional sealing: hermetic closure of the film to protect the mattress during transport Godozmpvrspfx Akhjkd Industrial applications and mattress packaging processes In practice, on an industrial mattress packaging line, this Resta automatic packaging machine is integrated after the [omitted: the text stops mid-sentence]. Special feature: allows double independent packaging (two separate bags) in the same space as a standard packaging machine, thanks to two superimposed polyethylene rolls. It also allows single or customized packaging (two different rolls, automatic change according to programming). The feeding belt and detachable press also allow packaging of bed bases. Manual and/or automatic operation, interfaceable with barcodes or RFID on the production line. Official technical specifications: Weight: 4,900 kg Electrical consumption: 11 kW Compressed air: 6-10 bar Power supply: 400V – 50Hz three-phase Available options: Press with 2 or 4 cylinders Reinforced hoist Motorized cradle for additional customization rolls Kit for removing polyethylene waste

Year of construction: 2024, condition: like new (used), functionality: fully functional, Sure. Below is a technical and commercial description suitable for product presentations, catalogs, or proposals: ### Mertmakina Mattress Packaging Machine with Integrated Quality Control System The Mertmakina mattress packaging machine is an industrial solution designed to automate and optimize the mattress packaging process, ensuring speed, uniformity, and quality in the final product packaging. The equipment integrates a quality control system, allowing for the monitoring of key stages in the packaging process and the identification of potential anomalies before the product leaves the line. #### Key Features * Automatic mattress feeding and positioning, ensuring a continuous and regular process. Gedjz Dk Arjpfx Akhokd * Automatic packaging system, adapted to the dimensions and characteristics of different mattress models. * Control of the application and sealing of the packaging, ensuring a uniform and consistent finish. * Integrated quality control system, designed to verify process parameters such as positioning, packaging integrity, and proper sealing. * Error and anomaly detection, with the possibility of signaling or automatic rejection of units that do not meet the defined parameters. * Intuitive operating interface, allowing the operator to monitor the machine's status, adjust parameters, and consult process information. * Recording and monitoring of production and control data, contributing to traceability and continuous improvement of production. * Robust industrial construction, suitable for operation in continuous production environments. * Increased productivity and reduced manual intervention, while simultaneously reducing variability between packages. ### Integrated Quality Control The integration of quality control transforms the machine into a more complete production and inspection system. Each mattress can be monitored during the process, allowing verification of whether the packaging has been correctly applied and whether the product meets the previously defined parameters. When a condition outside the established limits is detected, the system can generate an alert for the operator and, depending on the installed configuration, automatically direct the product for inspection or rejection. In this way, the solution helps to reduce packaging errors, increase the consistency of the final product, improve traceability, and reduce waste. ### Result The Mertmakina mattress packaging machine, equipped with an integrated quality control system, provides a solution focused on automation, productivity, standardization, and process control, enabling companies to increase the efficiency of the production line and ensure a consistent final presentation of the mattresses.

Condition: good (used), Year of construction: 2009, Manufacturer: Audion Elektro Type: AVP 600-2 Year of construction: 2009 Gedpsht Hkkefx Akhokd Power 0.7kW AUDION Veggiepack is a unique semi-automatic packaging machine for round vegetables, such as lettuce, cabbage, broccoli, cauliflower etc. The product is dense polypropylene or they are wrapped in styrofoam so that no unnecessary foil is left around the product. The product is protected from damage and the round packaging underlines its appearance. Product features: Sealed at the bottom of the product Empty foil and product separately Film positioning with photocell sensor Fast warm-up time No air compressor required Adjustable packing density AVP 600 specifications The size of the machine (HxWxH): 1230x830x960mm Machine weight: 220 kg Sealing bar: heat seal Film: (perforated) CPP, OPP, polystyrene Foil thickness: approx. 15 microns Foil width: 520-600 mm Product Length: Up to 220mm Product Height: Up to 175mm Production capacity: Max. 550 / hour Voltage: 230V / 1ph / 50Hz Power consumption: 700 watts

Condition: used, Eagle Pro Pack 240 PRO – Advanced X-Ray Inspection for Packaged Products The Eagle Pro Pack 240 PRO is a high-performance X-ray inspection system designed for maximum product safety, quality assurance, and production efficiency. Gedpfx Akex Srn Rshokd Ideal for food, pet food, pharmaceutical, and consumer goods applications, this system combines cutting-edge detection technology with robust industrial design. ----- Key Features & Benefits - Reliable detection of foreign contaminants, even in dense or metallized packaging - Multiple quality checks in a single inspection - High inspection accuracy at high production speeds - Hygienic, stainless-steel construction for demanding production environments Technical Specifications Inspection Area - Maximum inspection width: up to 242 mm - Maximum inspection height: up to 101 mm - Conveyor width: approximately 298 mm Detection Capabilities - Detection of metal, glass, stone, mineral bone, and dense plastics - Product integrity checks: - Missing or broken items - Shape and position verification - Fill level and mass/weight control (2-, 3- or 5-zone analysis) X-Ray Technology - Detector resolution: - Up to 0.4 mm (PXT™ dual-energy) - 1.2 mm single-energy Software & Controls - 15” full-color touchscreen HMI - Eagle SimulTask™ PRO image processing software - Windows 10 Enterprise operating system - Remote diagnostics via TeamViewer™ Conveyor & Speed - Variable belt speed: 17 – 114 m/min, depending on configuration and product Connectivity - USB 2.0 - Ethernet 10/100/1000 - Optional EtherNet/IP Fieldbus integration Construction & Safety - Hygienic stainless-steel design (IP65/IP66 optional) - Low radiation emission: < 1 µSv/h - Compliant with international X-ray and electrical safety standards (CE / FDA) Operating Conditions - Operating temperature: 0 – 40 °C - Power supply: 230 V AC, 50/60 Hz, single phase Why Choose the Eagle Pro Pack 240 PRO? - Superior detection performance - Increased production uptime - Reduced false rejects - Designed for modern, high-speed production lines More photos and full specifications: /

Condition: used, Używany pionowy reaktor Packo o pojemności 35 l. Wykonanie ze stali ko. Wymiary zbiornika: średnica 380 mm x długość prostej linii ściany 520 mm. Dolna dennica elipsoidalna, spawana. Górna dennica płaska przykręcana. Ciśnienie robocze zbiornika w zakresie: -1/6 bar. Ciśnienie robocze w płaszczu grzewczym do 6 bar. Reaktor posiada zamontowane od dołu mieszadło magnetyczne Novaseptic GMP 50, napędzane silnikiem 0.25 kW. Reaktor posiada lokalny panel sterowania. Całość zamontowana na przejezdnym wózku ze stali ko. Specifications: Capacity: 35 L Internal Pressure: 6 PSI Gjdpfx Ajyw S S Tjkhskd Jacket Pressure: 6 PSI Weight: Estimated: Kg250.0 Dimensions: 850mm X 1050mm

Condition: used, Year of construction: 2007, machine/vehicle number: M251, Used Clean pack Filling Monoblock Completely Refurbished in 2016Introduction to the cleanpack MonoblockThe Clean pack filler, a filling monoblock with a 24/24/6 configuration for carbonated and still water, stands out for its reliability and high-performance capabilities. Additionally, this machine, refurbished completely in 2016 and unused since then, ensures optimal working condition.Performance and Operational Capacity of the Used filling monoblock Clean pack completely refurbished in 2016This monoblock’s operational capacity is remarkable; it produces 9000 pieces per hour for 330 ml bottles, demonstrating its versatility in handling various bottle sizes, ranging from 50 mm to 105 mm in diameter and from 150 mm to 350 mm in height.Technical Features of the MonoblockAmong its key features, the presence of an aluminum cap and an effective rinsing system are noteworthy. Furthermore, the monoblock comes equipped with 24 grippers and utilizes a single treatment. Moreover, the filler incorporates 24 valves with an isobaric filling type and a fixed nozzle, while the capper features 6 heads for aluminum screw caps.The filling machine accommodates caps with dimensions of 28×16 mm. It supports bottle heights ranging from a minimum of 160 mm to a maximum of 350 mm. Furthermore, the machine works with both 330 ml and 750 ml bottles, and it also fills volumes up to 1000 ml, with a minimum capacity of 200 ml.Additionally, this model specifically fills round bottles. Clean Pack in Italy supplied the filler at the end of 2016, and technicians have since fully refurbished it with new spare parts to ensure optimal performance.Current Status and SafetyThis machine, currently stored in a warehouse, is ready for use and ensures safe operation. Additionally, manuals are included to facilitate easy operation and effective maintenance. Furthermore, the monoblock is equipped with integrated safety features and rotates counterclockwise for optimal operation.Benefits of Purchasing a Refurbished MonoblockPurchasing a used filling monoblock can provide advantages for companies seeking to reduce production costs without compromising quality. Moreover, the Clean pak completely refurbished in 2016 offers the opportunity to benefit from the performance of a high-quality machine at an affordable cost.Environmental Impact and SustainabilityChoosing a refurbished machine also means reducing the environmental impact associated with manufacturing new equipment. Reusing and refurbishing existing machinery contribute to waste reduction and resource optimization.Conclusion of the Used filling monoblock Clean pak completely refurbished in 2016In conclusion, the Clean pak monoblock, completely refurbished in 2016, is an excellent choice for companies seeking a reliable and cost-effective solution for their bottling needs. With its high-performance capabilities and impeccable condition, this machine stands out as an ideal solution to meet the production requirements of various beverages. Gkods Aifrbjpfx Akhod

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, Gross weighing and bagging system for 10-25kg sacks or buckets (5kg would also be adjustable). Has only been used for a test run and is otherwise unused. Gsdpezp Na Nofx Akhskd

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 8675, This LSK157 packing machine of model 8675 is offered in excellent operation condition. Gjdpfx Aket Aikzehskd The machine is fully functional. Year of construction : 2003

Condition: excellent (used), machine/vehicle number: 577EK51, REF: MM6187 Godpfxoxn Rz Es Akhekd 1 x Webomatic double chamber vacuum packing machine supplied with 16 x filler plates. Technical specification ⚙️ ✅ Model - ED 120. ✅ Serial number - 577EK51. ✅ Sealing bars - 4 x 640mm long. ✅ Distance between sealing bars - 580mm. ✅ Vacuum pump - Busch RA 0100 E 5Z1. ✅ Electrical requirements - 400 V / 50 hz / 3 phase. ✅ Power - 2.2 kW / 5.4 Amps.

Condition: new, conveyor belt width: 420 mm, input voltage: 220 V, The NHA biscuit machine with wire-cut system is designed for the production of various types of biscuits and has a capacity of 60–100 kg/h. It features a 420 mm wide conveyor belt and is suitable for trays with dimensions of 600 × 400 mm. The machine is easy to disassemble and clean and has interchangeable attachments for different products. The wire-cut system includes a mold for butter biscuits, while the depositing device contains three different molds for shortcrust pastry biscuits. Biscuit machine NHA: – Voltage: 220 V, single-phase – Power: 1.5 kW Gjdpfx Ako Ahwlajhokd – Dimensions: 1560 × 960 × 1380 mm – Conveyor belt width: 420 mm

Condition: used, Year of construction: 2006, Overview This Tempo-Pack SATURN is a rotary stretch wrapper for pallet loads, built in 2006 and supplied as a complete end-of-line system: infeed roller conveyors, a top-sheet dispenser, the wrapping station and outfeed conveyors with a 90° turn in an L-shaped layout. It was designed for cartons on Euro and half pallets at an output of 60 pallets per hour. The film carriage rotates around the stationary pallet, so the load is not turned during wrapping. Technical data - Manufacturer: Tempo-Pack - Model: SATURN - Year of manufacture: 2006 - Output: 60 pallets per hour - Product: cartons on pallets - Pallet formats: 1,200 x 800 mm (Euro pallet), 800 x 600 mm (half pallet) - Maximum load footprint: 1,300 x 1,100 mm Gkedpfx Aj Ahgtijkhed - Maximum load height including pallet: 1,800 mm - Maximum load weight: 1,500 kg - Conveyor height: 150 mm - Stretch film height: 500 mm - Top-sheet film width: 1,400 mm - Power supply: 3 x 400/230 V, 50 Hz, N, PE; 32 A - Compressed air: 6 bar - Machine height: 2,910 mm; minimum hall height 2,900 mm in the wrapper area - Layout footprint: approx. 13,590 x 6,750 mm Equipment - Rotary stretch wrapper with film carriage - Top-sheet dispenser ahead of the wrapper - Powered roller conveyors on infeed and outfeed, with a 90° transfer to the outfeed line - Control cabinet with touch panel operator interface - Safety fencing with access door - Layout drawing available Condition Used, functional and ready for operation. Viewing on site is possible by appointment. Availability Available immediately. Location: Germany.

Condition: good (used), Year of construction: 2006, GHD Hartmann GBK-205 Bread packing machine Capacity- up to 25 pcs/min, product depended Products: Whole breads, not sliced, Length: up to 400 mm, Width: up to 230 mm, Height: up to 150 mm Gedpe Aa Nazofx Akhjkd

Condition: used, Packaging line with Transnova-RUF Pick-&-Place, Garvens, Safeline, Mengozzi For sale is a complete packaging and inspection line from industrial use. Main components: - Pick-&-Place packer: Transnova-RUF including infeed and carton handling Gedey Exbdspfx Akhekd - Checkweigher: Garvens - Metal detector: Safeline (Mettler Toledo) - Infeed / singulation system: Mengozzi - Pusher / rejection unit - Conveyor technology and line connections Description: The system was used for automated: - Product infeed and singulation - Weight inspection - Metal detection - Rejection of faulty products - Pick-&-Place packaging into cartons / trays Suitable for applications in the food or FMCG industry. Condition: - Used complete line - System out of operation - Functionality not tested - Completeness not guaranteed - Sale as-is / as inspected Terms of sale: - Preferably sold as a complete unit - EXW (ex works), self-collection - Company sale – without warranty, guarantee or return

Condition: good (used), Year of construction: 2021, functionality: fully functional, Cushion Pack CP 428 S2i/6 packaging cushioning machine (cardboard shredder) in fully functional condition: Year of manufacture: 2021 Power: 3 kW Cushion width: up to 420 mm Infeed height: 20 mm Shipping via a freight forwarder is possible upon request. Gkedpfszpwnzox Akhsd #8552-2

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, type of input current: three-phase, total length: 10,000 mm, total height: 2,000 mm, total width: 1,500 mm, input voltage: 230 V, overall weight: 3,000 kg, input current: 32 A, Machines are as new. We have also one pizzabox printer from Sunthink printing 600mm you can get including packing line. Gkodpoz E I Sgefx Akhjd