Used Blast Cabinet for sale (4,131)

Condition: like new (used), DYEMANSION Type: POWERSHOT C 2.0 This system has never been put into operation. (as good as new!!) Dyemansion Powershot C blast cabinet Surface-friendly cleaning of powder-based plastic components DYEMANSION POWERSHOT C 2.0 Year of construction: 2021 The industry standard for simple and efficient powder removal Automated depowdering increases your production capacity With the Powershot C, a medium-sized installation space can be depowdered in just ten minutes. The time you need for parts cleaning, and personnel in your production can be significantly reduced. This increases your efficiency. By investing in automated depowdering with the Powershot C up to four manual blasting systems can be replaced. Gentle surface treatment thanks to intelligent hardware functions The blast cabinet of our Powershot C is equipped with a rotating basket and lined with stainless steel. Different blasting nozzles and ionization ensure reproducible results. A basket with a soft, replaceable lining protects the parts from damage during the process. Two simultaneously operating blasting nozzles are arranged perpendicular to the rotating basket and the parts it contains. This configuration guarantees efficient powder removal. High ease of use with improved ergonomics and process control Experience a new level of process control with touchscreen and integrated control panel. The Powershot C is operated via a user-friendly interface and pre-installed programs can be started. Individual programs can be easily configured and saved. The user-centered design makes everything easily accessible and safe to operate. Kwsdpfx Ahstq E N Eezjt Continuous monitoring enables an efficient and reproducible process. Technical data: POWERSHOT C AUTOMATION Individual programming, control and monitoring of the process parameters via control panel and touchscreen. PERFORMANCE: Processing time: Variable from 1 to 40 minutes, usual throughput time 3 to 10 minutes Capacity per cycle: Up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200 or nearly 1.5x full Stratasys H350 build space Effective volume of the basket 26 liters DIMENSIONS: System (L x W x H) 1700mm x 1310mm x 2030mm Recommended space requirement in operation (L x W x H) 2500mm x 2915mm x 2300mm WEIGHT: System 480 kg Power: Power 1kW Requirements 3x400V> 1kW 50Hz 2,5A PRESSURE AIR: Consumption Minimum: 1.4m³/min at 2.2bar Maximum: 1.8m³/min at 5bar NOISE EMISSION: Sound level < 80dB(A) Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 2008, Blast house, blast cabinet, sandblasting system Accessible by forklift truck Kodpfox Nm E Eex Ahzewt There are two cabinets, one for black steel and one for stainless steel. Complete with filter unit and recovery system Viewing is recommended.

Condition: new, Year of construction: 2025, Pressure blasting cabinet DSK 15.15.20.RB75 with or without roller conveyor. Blasting chamber W=1150 D=1150 H=930mm. 1 TÜV-tested pressure vessel 20l with conical outlet funnel. 1 blasting medium dosing valve with blasting medium quantity regulation pneumatically controlled. 1 built-in closing cone with guide tube. 1 compressed air connection with pneumat. Shut-off valve and branch for control air. 1 pressure regulator to adjust the blasting pressure. 1 blasting hose DN19. 1 handpiece with boron carbide blasting nozzle Venturi 8mm. 1 pair of blasting gloves. Dust extraction filter 2000m³/h 2,2kW Kodpfxsga I R Ej Ahzewt

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 1102 S with carriage and turntable. Kedpfsdhl Ngex Ahzswt Width: 1500mm depth: 1235mm height: 995mm Lift door pneumatic. Questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: new, Year of construction: 2025, Pressure blasting cabin 4-axis controlled cleaning of moulds, steel rings, ingot moulds in the aluminum, tire mold, pressing tools, etc. The travel of the jets is freely programmable. 2 PCs automatic nozzle and 1 St. hand nozzle for cleaning the parts. HARDOX turntable and feed screw for long-lasting use of the blasting machine. For questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts. Kjdpfxodrtane Ahzjwt

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 20.10.09 with carriage and turntable. width: 2050mm depth: 935mm height: 955mm Kwedpfxsfnh Rvj Ahzst Pneumatic lifting door with the advantage that the abrasive falls into the cabin when opening the door and not on the floor. If you have any questions about technical specifications etc. please contact us in writing or by telephone. The basis of the machines is the production at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with the well-known contacts of many years.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 280510, Offered for sale is a suction-blasting cabin Manufacturer: Radler & Ruf Model: 2642/7 Complete with extraction unit Type: AET 0.5 Used, functional condition. Collection by the buyer; assistance with dismantling and transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. On-site inspection available by appointment. More metalworking machines available, such as bench drills, press brakes, pillar drilling machines, eccentric presses, heavy-duty shelving, welding tables, MIG/MAG welding machines, compressors, etc. – please see my other listings. Domestic price: Net plus VAT or Net export price Collection only – dismantling and transport by the buyer or as agreed. If you are interested or have any questions, please feel free to send me a message. Further photos and technical details available on request. All information is provided without guarantee or warranty. Errors and prior sale excepted. For further questions, please call. Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We can take care of all customs and registration formalities for an additional fee. For an extra charge, we can deliver the vehicles to the port. Kjdpfxsx Da Ndj Ahzowt

Condition: new, Technical specification: - Chamber volume: 1600 liters - Power supply: 230V ~ / 50Hz - Nominal operating pressure: up to 10 bar - Cleaning capacity: up to 23 m2 / h - Cleaning degree: SA-2.0 (deep and extensive corrosion) - Air consumption: 500 l / min (for 4.0 mm nozzle) - Maximum air flow: up to 2,300 l / min - Supported nozzle diameters: from 4 to 10 mm - Grinding valve: 2 x vacuum BRAGO - Gun: vacuum CTR x 2 - Working area dimensions: 1 500 x 1340 x 720 mm - dimensions of sight glass: 305 x 610 mm - Working table load: up to 600 kg - Lighting: LED, adjustable in the range of +/- 90 degrees (two parts) - Coating protection: powder coating - Working temperature: 10 to + 50 degrees Celsius - Common work table: Yes - Inspection valve: Yes - Weight: 720 kg The offer includes: - Land Reko SCI-1600-10 chamber cleaner -Transport cart - turntable - Boron carbide nozzle: 4, 5, 6, 7, 8, 9 or 10 mm (optional) - Protection leather gloves - Holder for hanging details - Foot control pedal x 2 - Pneumatic connection - CE Declaration of Conformity Kwodpfx Ahsft Sqxszst - User manual in German language - 24 months warranty for consumers - 24 months warranty for contractors

Condition: new, Technical specification: - Chamber volume: 690 liters - power supply: 230V ~ / 50Hz - power of dedusting system: 1 200 watt - Nominal operating pressure: up to 10 bar - Cleaning capacity: up to 13 m2 / h - Cleaning degree: SA-2.0 (deep and extensive corrosion) - Air demand: 500 l / min (for 4.0 mm nozzle) - Maximum air flow: up to 1,500 l / min - Supported nozzle diameters: from 4 to 10 mm - Grinding valve: vacuum BRAGO - Gun: vacuum CTR - Working area dimensions: 1 150x710x850 mm - Sight glass dimensions: 305x610 mm - Working table load: up to 250 kg - Lighting: LED, adjustable in the range of +/- 90 degrees (two parts) - coating protection: powder coating - Working temperature: - 10 to + 50 degrees Celsius - Common work table: Yes - Inspection valve: Yes - Weight: 195 kg The offer includes: - Land Reko SCI-690-10 chamber cleaner. - Dust removal system of the OP-1200 - Boron carbide nozzle: 4, 5, 6, 7, 8, 9 or 10 mm (optional) - Protection leather gloves - Holder for hanging details - Foot control pedal - Pnematic connection - CE Declaration of Conformity - User manual in German language - 24 months warranty for consumers - 24 months warranty for entrepreneurs Kodpfx Ajft Sqbohzowt

Condition: new, Sandblasting cabin Bernardo SB 4Workspace dimensions: 1110 x 820 x 810 mmAir consumption: 680 l/minRequired air pressure: 8.6 barFunnel capacity: 148 litresArm-hole opening: 180 mmAir connection: 3/8 "Weight approx. 160 kg Ksdpfx Ahsd Tb Uzozewt

Condition: good (used), Dimensions of the blasting cabin approx.: - 1.40 m wide - 1.65 m high - 1.00 m deep Kwedjwtyd Aepfx Ahzjt Dimensions of the extraction unit approx.: - 0.7 m wide - 2.60 m high - 0.8 m deep

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Kedpewc Nrnefx Ahzowt Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Year of construction: 2025, condition: new, A sandblasting cabinet is an enclosed system designed for performing surface cleaning, roughening, or pre-paint preparation on small to medium-sized parts. Unlike large blasting rooms, cabinets are compact and self-contained, allowing operators to work in a controlled, dust-free environment — safely and efficiently. ⚙️ Main Features of a Sandblasting Cabinet Enclosed Working Area: The cabinet is fully sealed. The operator works through glove ports and views the process through a clear safety window. Nozzle (Blasting) System: Compressed air mixes with abrasive material (such as sand, corundum, steel grit, or glass beads) and propels it toward the surface for cleaning. Lighting System: Equipped with bright LED lighting for excellent visibility inside the chamber during operation. Dust Extraction / Filtration Unit: Collects and filters dust generated during blasting, keeping the air clean and maintaining operator safety. Kwjdpjxr Awaefx Ahzot Abrasive Recovery System: Used abrasive falls into a collection hopper, is cleaned, and recycled for reuse — making the process cost-efficient and environmentally friendly. Ergonomic Design: Includes features such as comfortable working height, clear viewing window, and foot pedal controls for easy operation. 🧩 Types of Sandblasting Cabinets Pressure Blast Cabinets: Deliver abrasive at high pressure — ideal for removing heavy rust, paint, or scale. Suction (Venturi) Cabinets: Use air suction to draw and accelerate the abrasive — suitable for light cleaning and precision work. Automatic Turntable Cabinets: Include rotating tables for even, automated surface treatment of parts. Wet Blasting Cabinets

Year of construction: 2014, condition: used, 1 piece sandblasting cabin, manufacturer MHG, type SMG 160, year 2014, with hopper, bunker, loading table, internal no. 22 Kodpfx Ajyaxk Hehzjwt

Condition: new, Year of construction: 2025, INJECTOR Sandblasting Cabinets The Benefits and Applications of Injector Sandblasting Cabinets Injector sandblasting cabinets use an air-driven venturi system to create a vacuum that draws abrasive media into the airstream. The abrasive media is then propelled at high velocity from the blast nozzle, where it impacts the surface to be cleaned or prepared. Injector sandblasting is typically used for lighter applications. Our SAPI injector sandblasting cabinets—including the Elk, Ram, and Buffalo models—use an air-driven vacuum system that draws the media to the front of the nozzle, where it meets the airstream and then "shoots" the mixture onto the workpiece. These cabinets are ideal for lighter applications and offer efficient and cost-effective solutions. ----- The Widder 70/100 injector sandblasting cabinet is a robust and reliable solution for demanding surface preparation requirements. Featuring a large work surface, a right-hand side door, and an efficient dust control system, this cabinet is designed for use with various types of abrasives and can accommodate small to medium-sized parts. It is ideal for industrial applications such as metal fabrication shops and workshops. ----- Kedowf Dwwspfx Ahzewt The Elch 100/130 injector sandblasting cabinet from SAPI is a compact and versatile solution for medium to large parts. Equipped with a large viewing window, two side doors, and an efficient filtration system, this cabinet allows for easy monitoring of the blasting process and ensures a clean and safe working environment. The Elch is designed for use with a wide variety of abrasives. Its user-friendly design and efficient blasting process make it an ideal choice for lighter applications in industries such as automotive, aerospace, and manufacturing. ----- The Büffel 140/180 injector sandblasting cabinet is a robust blasting machine designed for demanding applications. It features an air-driven venturi system that draws abrasive into the airstream and expels it at high speed from the blast nozzle. The Büffel cabinet is also available with an integrated filtration system that helps reduce dust and improve air quality during the sandblasting process. Loading heavy parts is also easily possible thanks to the front door using a forklift or crane. With its robust construction and efficient blasting performance, the Büffel 140/180 injector sandblasting cabinet is an ideal choice for industrial applications requiring high throughput and minimal downtime.

Year of construction: 1994, condition: used, - Year: 1994 - Documentation available: Yes - CE certificate present: No - Serial number: 40640000 - Control: Conventional Financial information VAT: The price shown is exclusive of VAT Kjdownhl Rspfx Ahzjwt VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, This listing is for the Walker Class 11 Biological Safety Cabinet The unit is in full working condition and is ready for immediate use A Walker Biological Safety Cabinet is a type of biosafety cabinet (BSC) designed and manufactured by Walker, a company that specializes in laboratory containment equipment. These cabinets are used in laboratories to provide a controlled, contaminant-free environment for handling potentially hazardous biological materials. Kwedpfxoxhfr Eo Ahzot What Is a Biological Safety Cabinet? A Biological Safety Cabinet (BSC) is an enclosed, ventilated laboratory workspace designed to: Protect the user from exposure to biohazards, Protect the experiment or product from contamination, Prevent environmental contamination. They achieve this through HEPA (High-Efficiency Particulate Air) filtration and controlled airflow systems. Walker Biological Safety Cabinet – Key Features HEPA-filtered airflow: Removes airborne particles and microorganisms. Laminar airflow: Provides a clean work area by maintaining unidirectional air movement. Front access sash: Allows operator access while maintaining airflow barrier. UV light for sterilization when not in use. Ergonomic design: For user comfort during long procedures.

Condition: good (used), Aluminium measuring table with 50 mm aluminium plate and drawer cabinet Type: Measuring table with aluminium measuring plate Kwsdjhvmkispfx Ahzjt Dimensions: 80 cm wide, 75 cm deep and 95 cm high (2.26 cm high with construction) Aluminium plate: 5 cm thick, with mounting threads Manufacturer drawer cabinet: Garant (Hoffmann Group) Number of drawers: 2 Material: aluminium Condition: used complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Width: 450 mm -Depth: 630 mm -Height: 1035 mm -Internal drawer dimensions: 330 x 630 mm Kodjb A Iukopfx Ahzowt -Drawer heights: 260 mm -Weight: 216 kg

Year of construction: 1996, condition: excellent (used), TUBE BLASTING MACHINE.Machine is used to clean the inner surface of the copper tube in a continuous process of blasting. Kwodpfx Ahjpmtb Rjzst

Condition: used, functionality: fully functional, Good working condition. Please check out our other listings as well. Kwsdsupx E Uspfx Ahzot

Condition: used, functionality: fully functional, Flow Cabinet/Safety Cabinet. Good working condition. Please check out our other listings as well. Kedpfx Aheupx E Iszswt

Condition: not inspected (used), functionality: unexamined, total length: 1,200 mm, total width: 770 mm, total height: 1,200 mm, overall weight: 400 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Table diameter: 350 mm Table dimensions: 600 x 210 mm Kwodpfxoxqm Ers Ahzst Number of T-slots: 4 Table dimensions: 600 x 200 mm Number of T-slots: 4 MACHINE DETAILS Dimensions (L x W x H): 1,200 x 770 x 1,200 mm Weight: 400 kg EQUIPMENT Collets Boring heads Various clamping devices Counter-holder Rotary table Milling tables All accessories suitable for DECKEL tool milling machines

Condition: not inspected (used), functionality: unexamined, total length: 1,370 mm, total width: 750 mm, total height: 1,100 mm, overall weight: 300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned off as part of a business liquidation. Placing a bid obligates timely collection between 26.01.2026 and 29.01.2026! Included: Boring heads Boring tools Collets High-speed milling head Counterholder Additional clamping equipment The accessories are suitable for DECKEL tool milling machines. MACHINE DETAILS Kwodpfx Aoxqm Dujhzst Dimensions (L x W x H): 1,370 x 750 x 1,100 mm Weight: 300 kg

Condition: new, Year of construction: 2012, Electric power transmission cabinet, Electrical distribution cabinet, Electrical cabinet 180.5 kW, AEG Thyristor, AEG Thyro-A, 2A 400-350 HFRL1, Thyristor converter, Power controller, Electric power transmission cabinet for furnace, Used machine Manufacturer: Amarc srl Type: 120254; 3057 Year: 2012 Koderbzygjpfx Ahzswt Dimensions: 1020 x 530 x 2130 mm Weight: 200 kg Cabinet: 400 V; 3-phase; 50 Hz; 262 A; 180.5 kW Power transmission system AEG Thyro-A 2A 400-350 HFRL1 (Thyristor) AEG Thyro-A: Thyristor 400 V 350 A Cooled Power regulator Load supervision on analog outputs