Borer for sale
Identified location: Ashburn (US) (Edit)
ready for operation (used)
Serial No. 6999
Table size 1200mm x 1200mm
Table Longitudinal traverse (Y) 1200mm
Bho3hofwi8
Table Cross traverse (X) 1500mm
Table Swivels 360 Degrees
Head stock vertical traverse (Z) 1500mm
Input 415/3/50hz
Spindle & facing speeds 4.5 - 224 rpm
Spindle speeds 22.4 - 1120 rpm
Feed rate Variable .76 - 2500 rpm
Facing head diameter 680mm
Facing head slide cross traverse 180mm
Spindle traverse 600mm
Spindle diameter 100mm
Spindle Taper 50 INT
Fitted with 2x TableSupport Outriggers, Hydraulic Draw b... more
Floor typer borer AFP 1004AC
Ycaxly7as more
ready for operation (used)
Serial No. 150 1473
Control NS 6
Table size 3048mm x 1525mm
Sub-table size 1830mm x 1525mm
Table Longitudinal traverse (Y) 1900mm
Table Cross traverse (X) 2740mm
Sub -Table Swivels 360 degrees
Head stock vertical traverse (Z) 2134mm
Input 415/3/50hz
Spindle speeds 7.5 - 975 rpm
Feed rate 1.1 - 3360 mm/min
Spindle traverse 914mm
Spindle diameter 130mm
Spindle Taper 50 INT
Fitted with Pendant control
Equipment Tailstock, outriggers x 4, hydraulic pack.
Length 7000mm
Width 7900mm
Height 4600mm
Nett... more
Table type borer AFD 100
Bvv3j8ie more
ready for operation (used)
Serial No. 5306-3
Table Size 48" / 1219mm
Swing 60" / 1524mm
Height under cross slide 45.1/2" / 1156mm
Cross slide rise & fall 22" / 559mm
Tpglbqpd
Turret rise & fall 36" / 914mm
Turret traverse 36" / 914mm
Speeds 5.6-125 rpm
Feed rate 0.0025" - 0.125" / 0.0635mm - 3.175mm
Input 400/3/50 ac 25 hp
Digital Readout Mitutoyo 2 Axis
Fitted with 4 x Table Jaws and 3 x Toolholders
Length 10'6" / 3.2m
Width 8'4" / (2.54m
Height 12'4" / 3.76m
Nett weight actual 11.1/2 ton / 11,684 kgs more
Table type borer AF 85
Nkeegtt2 more
ready for operation (used)
Serial No. 7018-4
Table Size 48" /1219mm
Swing 60" / 1524mm
Height under cross slide 60" / 1524mm
Cross slide rise & fall 36" / 914mm
Turret rise & fall 38" / 965mm
Turret traverse 41" / 1041mm
Speeds 10.5-234 rpm
Feed rate 0.10mm-5mm Per Rev
Tpguswde
Input 415/3/50 ac 30 kW
Fitted with Swarf Conveyer, Enclosed Guarding, 4 x Table Jaws and Turret Tooling
Length 11'6" / 3.51m
Width 11'6" / 3.51m
Height 11'10 / 3.61m
Nett weight actual. 14.1/2 ton / 14,732 kgs more
Floor borer BKF 150 NC
Kbxjjynr more
ready for operation (used)
Serial No. 5941 + 1
Table Size 54" / 1371mm
Swing 60" / 1524mm
Height under cross slide 43" / 1092mm
Dwkhda
Cross slide rise & fall 21" / 533mm
Turret rise & fall 36" / 914mm
Turret traverse 36" / 914mm
Speeds 4.5 - 100 rpm
Feed rate 0.005 - 0.250
Input 400/3/50 40 hp
Digital Readout 2 axis
Fitted with Scan-o-matic hydraulic copying attachment.
Length 116 inches.
Width 128 inches.
Height 144 inches.
Nett weight actual. 14,010 Kgs / 13.79 Tons more
Floor borer AFM 150
Fyvsrl7zi more
ready for operation (used)
Serial No. 5589-1-2
Table Size 3352mm (132")
Swing 3657mm (144") / Swing in Gap 3962mm x 381mm (156" x 15")
Height under cross slide 2032mm (80")
Height under Ram 1930mm (76")
Cross slide rise & fall 1219mm (48")
Ram traverse 1219mm (48")
Ram rise & fall 914mm (36")
Speeds 2 - 53 rpm
Dwyegy
Feed rate 0.10 - 5.0 mm per/min
Input 400/3/50hz
Control Pendant more
ready for operation (used)
Serial No. 6892-1
Table Size 2286mm / 90"
Swing 2438mm / 96"
Height under cross slide 1219mm / 48"
Height under turret 1219mm / 48"
Gtrxn3s2
Cross slide rise & fall 508mm / 20"
Turret rise & fall 965mm / 38"
Turret traverse 1270mm / 50"
Speeds 5.2 - 117 rpm
Feed rate .008" - .375"
Input 415/3/50hz AC 30 kW
Control Pendant
Digital Readout Newall DP700
Fitted with 4 x Table jaws, 5 position turret
Equipment Electrical panel
Length 4000mm
Width 3400mm
Height 3950mm
Nett weight actual. 19,000 Kgs. ... more
ready for operation (used)
Serial No. 6628-2
Table Size 1955mm / 77"
Swing 2286mm / 90"
Height under cross slide 1219mm / 48"
Height under turret 965mm / 38"
Cross slide rise & fall 508mm / 20"
Turret rise & fall 457mm / 18"
Turret traverse 1219mm / 48"
Speeds 3.4 - 150 rpm
Feed rate 0.127mm - 6mm per/min. 0.005" - 0.250" per/min
Input 415/3/50hz
Fitted with 5 position turret
Bjejc0x207
Equipment 4 x table jaws more
ready for operation (used)
Table Size 3350mm, (132")
Swing 3657mm, (144") / swing in gap 3962mm x 381mm (156" x 15")
Height under cross slide 2032mm, (80")
Height under Ram 1930mm, (76")
Cross slide rise & fall 1220mm, (48")
Ram traverse 1220mm, (48")
Ram rise & fall 914mm, (36")
Speeds 1.5 - 39.5 rpm
Feed rate 0.1mm - 6mm, (0.005 - 0.250) per/min
N2gkx
Input 350/400/3/50hz 61 kW
Control Pendant
Equipment 4 x table jaws more
ready for operation (used)
Serial No. 5678
Table Size 3048mm (120")
Swing 3657mm (144")
Height under cross slide 1880mm (74")
Height under turret 1880mm (74")
Cross slide rise & fall 1016mm (40")
Guualkz
Ram In/Out 965mm (38")
Turret rise & fall 965mm (38")
Turret & Ram traverse 1524mm (60")
Speeds 1.5 - 39.5 rpm
Feed rate 0.1 - 6mm per/min
Input 380/400/3/50hz
Control Pendant
Fitted with Table jaws
Equipment 5 position turret
Nett weight approx. 60 tons more
ready for operation (used)
Control Fagor
Table Size 1250mm
Swing 1750mm
Height Under Cross Slide 690mm
Turret Rise & Fall 700mm Z Axis
Turret Traverse 1300mm X Axis
Speeds 5.25 - 324 rpm
Bjejdejbo8
Feed Rate 0.1 - 5 mm
Input 415/3/50hz
Fitted with 5 way tool post, Coolant, Guarding
Equipment 4 x table jaws, Pendant contol
Nett Weight Actual. 20,790 Kgs. / 20.5 Tons. more
ready for operation (used)
Serial No. 7158
Table size 1500mm X 1500mm
Table Longitudinal traverse (Y) 2400mm
Table Cross traverse (X) 2400mm
Table Swivels 360 degrees
Head stock vertical traverse (Z) 2000mm
Input 415/3/50hz
Spindle & facing speeds 3 - 224 rpm
Spindle speeds 14 - 1116 rpm
Feed rate 3 - 224mm per minute
Facing head diameter 820mm
Facing head slide cross traverse 190mm
Spindle traverse 770mm
Spindle diameter 125mm
Spindle Taper 50 INT
Table load 15 ton
Digital read out Philips 6600 series 4 axis
Fitted with ... more
1975
ready for operation (used)
Serial No. 1105
Table Size 1120mm
Swing 1400mm
Height under turret 900mm
Bbz3otj
Cross slide rise & fall 600mm
Turret rise & fall 700mm
Turret traverse 800mm
Speeds 5 - 250 rpm
Feed rate 5 - 1828mm per/min
Input 400/3/50hz
Side Head Rise & Fall 500mm, In/Out 700mm, Fitted with 4 way toolpost
Fitted with 5 way turret powered, Suds, Push button pendant control
Length 3050mm
Width 2880mm
Height 3450mm
Nett weight actual. 17,000 Kgs. / 16.75 Tons. more
ready for operation (used)
Serial No. 52064
Control Siemens 840D Colour Graphic Control
Table Size 1700mm
Table Speeds Low range 0-30 rpm, mid range 30-74 rpm, high range 74-155 rpm
Swing 2000mm
Height Under Cross Rail 1800mm
Cross Rail Rise & Fall 800mm
Ram Cross Travel 1500mm each ram
Rams Vertical Traverse 1000mm each ram
Table load 10/12 tons
Input Main motor 75 kW
Equipment 2 x 2 station automatic tool changers and 17 x quick change toolholders
Length Approx 10M
Yr7pyw
Width Approx 6M
Height Approx 5.8M
Nett Weight A... more
ready for operation (used)
Control Fagor 8025T
Table Size 2500mm
Table Load 15000 Kgs
Maximum Turning Diameter 2600mm
Govlrxn
Height Under Cross Slide 1900mm
Cross Slide Rise & Fall 1600mm
Ram Traverse 1500mm
Speeds 112 rpm
Feed Rate 4000mm / min
Motor 60 kW / 90 HP
Equipment Electronic Handwheel, Swarf Conveyor
Length 4800mm
Width 4800mm
Height 5000mm
Nett Weight Approx. 37000 kgs more
ready for operation (used)
Serial No. 12402
Control Heidenhain TNC 355
Table Size 1600mm x 1400mm
Table Load 6300 Kgs
Power of Main Drive 33kW
Longitudinal Traverse Z Axis - 2500mm
Cross Traverse X Axis - 1985mm
Vertical Traverse Y Axis - 1620mm
Boring Spindle Traverse W Axis - 530mm
Table Rotates B Axis - 360 degrees
Speeds 6.3-1250 rpm variable
Spindle Diameter 110mm
Spindle Taper IOS 50
Input 415/3/50hz with transformer
Fitted with Spindle brake
Equipment 2 x outriggers, coolant
Length 8000mm
Width 4800mm
Jcfbfrgt
Heig... more
ready for operation (used)
Serial No. 6959 - 4
3gbfopfx
Table Size 36" 914mm
Swing 24" 609mm
Height under cross slide 23, 1/2" 596mm
Turret rise & fall 22" 558mm
Turret traverse 26" 660mm
Speeds 10.5 - 234 rpm
Feed rate .005 - .234
Input 415/3/50hz 22kW motor
Digital Readout Newall C80
Fitted with 5 way turret, Table jaws, Coolant pump
Length 2500mm
Width 2100mm
Height 2800mm
Nett weight actual. 7,030 Kgs. / 7 Tons. more
1.4m long table
Approximately 1.2m max drilling length
Bl2skisqlo
Equipped with :
3 x PD3 Vertical drilling heads with:
2 x 6 spindle drill blocks
1 x 10 spindle drill block
2 x DU8 Rear horizontal drilling heads with :
1 x 6 spindle drill block
1 x 7 spindle drill block
Heads are motor driven x 1.5hp and with pneumatic stroke
Rack and pinion adjustments to heads
2 hand push button safety control to drilling cycle
Front emergency trip wire more
- CNC-control SIEMENS 840 D
- Boring and milling device
- C-axis
J3erlniz
- Universal angular milling head
Faceplate diameter 8000 mm
Swing diameter 16000 mm
Turning height 3000 mm
Ram head vertical travel 2500 mm
Workpiece weight 250 to more
2001
good condition (used)
Machine in good technical condition, fully functional. Control system Mefi 859.
Clamping plate diameter mm 1250
Max. diameter of workpiece mm 1500
Mveidc
Max. height of workpiece mm 1425
Rame stroke /Z axes/ mm 750
Clamping plate revolutions r.p.m. 3,3 - 400
Total machine input kVA 85 /107/
Main motor output kW 40 /63/
Machine dimensions mm 6150 x 5410 x 5350
Machine weight kg 22700 more
TOS WH 10 CNC CNC horizontal borer
Bl3saest7y
Yom 1991 - complete overhauled in year 2011 including new Heidenhain controller
few usage - all 5 axes including rotary table are CNC controlled
Controller = HEIDENHAIN iTNC 530 with HR 410
Travels =
X = 1.250 mm
Y = 1.020 mm
Z = 1.000 mm
W = 500 mm - Pinole
Table = 1.120 mm x 1.000 mm
Spindle diameter = 100 mm
Toll taper = ISO 50
Spindle Speed = 3.000 rpm
manual milling head adapter
errors excepted
Subject to prior sale
short term available - stil... more
WEBSTER BENNETT EM 48” VERTICAL BORER WITH ELEVATING RAIL
St0j00
MAKE WEBSTER BENNETT
MODEL EM 48
TABLE SIZE 1219 mm
SWING 1524 mm
HEIGHT UNDER CROSS SLIDE 1156 mm
CROSS SLIDE RISE & FALL 559 mm
TURRET RISE & FALL 914 mm
TURRET TRAVERSE 914 mm
SPEED 5.6 – 125 RPM
FEED RATE 0.0025” – 0.125” / 0.0635 mm – 3.175
INPUT 400 / 3 / 50 AC 25 HP
DIGITAL READOUT NEWALL 2 AXIS READOUT
MACHINE DIMENSIONS L: 3.2 m
W: 2.54 m
H: 3.76 m
MACHINE WEIGHT 11,684 KGS more
unexamined (used)
- vertical borer -second hand-
G9hl7h
- WMW - BL5
- table size 1100 x 750mm
- working range longitudinal app.1000mm / cross app.700mm
- stroke ca. 220mm
- feed 0,03/0,06/0,09/0,18 mm/U
- electrical power app.4kw
- outside dimension app. 310 x 240 x 250cm / weight app. 5t
- no manual available more
Hopper fed multi head drilling machine for furniture components. Equipped with step by step throughfeed conveyor, 6 drilling units plus left and right dowel gluing and insertion units
Workpiece specification
Maximum length: 1200 mm
Minimum length: 250 mm
Maximum width: 100 mm
Minimum width: 25 mm
Maximum height: 30 mm
Minimum height: 15 mm
Dowel diamter: 8 mm
Dowel length: 30 mm
Equipped with:
Hopper feed unit
First working positi... more
Retrofit 2010
Control HEIDENHAIN 4110
Faceplate diameter 1400 mm
Swing diameter 1780 mm
Mve33w
Turning height 1050 mm
Ram head vertical travel 750 mm
Capacity 55 kW more
X/Y/Z/W 6.000/2.100/1.600/900mm, spindle dia 160mm / ISO-50, drive 44 kW, speeds 1,6-800 rpm, feeds 0,5-2.000 mm/min, rapids 3 / 5 m/min, max facing dia 1.350 mm, 2.000 U/Min, SK 50, konv.
0qaqtx7
More Information upon request. more
Machine in good condition, fully functional. Control system MEFI.
Facing chuck dia.: mm 1250
Max. dia. of cicumferential turning: mm 1250
Max. dia. of face turning: mm 1400
Max. turning height: mm 900
Max. workpiece weight: kg 6000
Ram stroke: mm 1000
Facing chuck RPM:
Normal min-1 2,5-250
Fq0dshaj
Increased min-1 3,15-315
High min-1 4-400
Feeds stepless: mm/rot. 0,05-40
mm min-1 1-1000
Rapidfeed: mm min-1 6000
Main engine output: kW 40 (63)
Max. t... more
2007
good condition (used)
Control system Heidenhain TNC 530
Diameter of working spindle 105 mm
Travel X-axis 1800 mm
Travel Y-axis 1600 mm
Spindle travel - W axis 630 mm
Bezsjed
Travel Z-axis 1250 mm
Spindle speed 0 - 3000 /min.
Spindle taper ISO 50
Max. load of table 5000 kg more
Double (tandem) machines.
Each machine can also be operated seperately with own control.
* SIEMENS 840 D SL CNC control
* 4 off fork milling heads, type UFK 600 NC
- Power 25 kW, max. speed 3000 rpm, max. torque 600 Nm
- C-axis 360 deg, A-axis +/- 100 deg.
spindle diameter 150 mm
x-travel 21000 mm
y-travel 5000 mm
control SIEMENS 840 D SL
ram stroke (Z) 1200 mm
dimension of the ram 360 x 400 mm
tool taper ISO 50
spindle turning speed range 10 - 3000 rpm
transmission ratio 2
feeds X-axis 1 - 1... more
Pegard AF 16 PMM, X / Y / Z / W 3,750 / 1,800 / 600 / 1,140 mm, dia 1,780 mm, 1,000 rpm, SK 50, modernized control S7 PLC
Bkyq39v03t
More Information upon request. more
Machine in very good technical condition, fully functional, under power. Control system Mefi 859 N Dual. Controlled C axe. Chip conveyor.
Clamping plate diameter mm 800
Max. working diameter mm 900
Max. working height mm 630
Max. workpiece weight kg 2500
Machine dimensions mm 4900 x 3830 x 4485
Uq9nwn3
Machine weight kg 16000 more
The machine is discontinued in 2019
and is accuracy from 0.02 to 0.03 per 1000mm.
Bhskvwnuxr
The owner has to process bigger and bigger housings. more
Working Area. 1800x2000mm
Turning degree. 4x90°
Cavtoy2a
Travel Long. 1250mm
Table load Capacity. Min 12.5 Max. 15t
Condition. Used [ under Power]
Für further Information, please feel free to call or write us. more
* SIEMENS 840 D SL CNC control
* 2 off fork milling heads, type UFK 600 NC
- Power 25 kW, max. speed 3000 rpm, max. torque 600 Nm
- C-axis 360 deg, A-axis +/- 100 deg
spindle diameter 150 mm
x-travel 5500 mm
y-travel 5000 mm
control SIEMENS 840 D SL
ram stroke (Z) 900 mm
dimension of the ram 360 x 400 mm
tool taper ISO 50
Oewcn
spindle turning speed range 1 - 3000 rpm
transmission ratio 2
feeds X-axis 1 - 10000 mm/min
feeds Y-axis 1 - 15000 mm/min
feeds Z-axis 1 - 15000 mm/min
main drive motor ... more
Horizontal borer H-floor type WF 13 R
Producer: Fermat
YP: 2013
Control HEIDENHAIN... TNC 530
Spindle diameter... 130mm
X axis... 10000mm
Y axis... 3000mm
Spindle speed... 10-3000.
Axis W... 730mm
Axis V... 600mm
INTERNAL COOLANT... 20 bar
ISO 50
Power of main engine... 37/56 kW
Bkjhe07nvi
L x W x H... 12000 x 7640 x 5570mm
The weight of the machine... 73000kg
CNC rotary table with cross bearing, maximum plate 2000 x 2400 mm, V-axis feed 2000 mm, 2 engines
Measurement of X -, Y -, Z - and V-ax... more
