Used Bridgeport Vmc 560 22 for sale (45)

Year of construction: 2000, condition: ready for operation (used), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Gkjdpfx Ajv Uqb Nskhed

Condition: ready for operation (used), Year of construction: 2001, operating hours: 10,631 h, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 410, total height: 2,700 mm, table load: 500 kg, overall weight: 4,200 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 13,000 W, tool weight: 7,000 g, number of axes: 3, This 3-axis Bridgeport VMC 1000 22 was manufactured in 2001. It features a working area X travel of 1020 mm, Y travel of 610 mm, and Z travel of 610 mm. The machine includes a robust table size of 1150 x 580 mm with a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000 22 vertical machining centre we have for sale. Contact us for further details. Godpfoy D N Aijx Akhskd • Table: 1150 x 580 mm; T-slots 5x; T-slot size 18 mm • Spindle torque up to 110 Nm • Tooling: holder SK 40 DIN 69871; tool changer 22 stations (optional 30); max tool Ø 75 mm; max tool length 250 mm; tool change time approx. 5.2 s • Axis speeds: rapid X/Y 40,000 mm/min; rapid Z 30,000 mm/min; feed 1–12,000 mm/min; acceleration 6 m/s² • Accuracy: positioning ±0.005 mm; repeatability ±0.002 mm • Coolant system: tank capacity 450 l; pump capacity 70 / 140 l/min • Electrical: 400 V, 3-phase, 50 Hz; full load current 30 A; fuse protection 63 A; connected load approx. 20 kVA • Pneumatics: compressed air 6 bar; consumption approx. 80 l/min • Machine size/weight: dimensions 2830 x 2360 mm; transport with Chip conveyor weight approx. 4700 kg • Spindle operating time: 10,631 h Additional equipment • Chip conveyor (included) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2001, Available for immediate pickup from our location: Vertical machining center, Bridgeport Type VMC 800 Year of manufacture: 2001 Gjdpj Aa Iriofx Akhokd Spindle renewed in 2026 (€13,000) Heidenhain TNC 410 Table size: 1000 x 500 mm X/Y/Z travel: 800 / 500 / 500 mm Table load capacity: 750 kg SK 40 22-tool changer Spindle speeds up to 10,000 rpm Drive power: 11 kW Vises, chucks Weight: 4 tons Price: €9,000 plus VAT, ex works

Year of construction: 1995, condition: ready for operation (used), machine/vehicle number: 20910, table mounting size: 1000 x 490 mm movements x/y/z: 800/510/500 mm Gksdpfx Akjdt Ttkshjd spindle taper: ISO 40 ISA min./max. distance table/spindle: 120/620 mm spindle turning speed range: 40 - 6000 rpm number of tool positions: 22 pieces carriages: x/y 1 - 3200 / z 1 - 2000 mm/min rapid move: x/y 1 - 3,2, z 1 - 2 m/min electrical connection: 380 V, 19 kW space needed: 2850 x 2150 x 2600 mm weight: 3800 kg

Condition: good (used), functionality: fully functional, Bridgeport VMC 600 22 CNC machining center with Heidenhain TNC 410 / 426 control system Gedszhg Riopfx Akhskd -Travel X-axis: 600mm -Travel Y-axis: 410mm -Travel Z-axis: 520mm -Table load capacity: 500 kg -Spindle taper: SK 40 ISO/BT -Spindle power: 8.5 kW -Speed range: 40 to 6000 RPM -Tool changer: 22 positions -Number of controlled axes: 3 -Year of manufacture: 2000 -Length: 2800 mm -Width: 2050 mm -Height: 2300 mm -Weight: Approx. 2500 kg

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC370, overall weight: 3,600 kg, spindle nose: SK40, Equipment: documentation/manual, Bridgeport VMC1000-22 Heidenhain TNC370 control X-Y-Z 1020-520-500 mm 6.000rpm SK40 22 Toolchanger Gsdsz Iugcopfx Akhjkd Built 6-1996 Machine is under power

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 950693, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 43 m/min, rapid traverse Y-axis: 43 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 20 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 900 kg, total height: 2,682 mm, total length: 2,340 mm, total width: 2,830 mm, table width: 580 mm, table length: 1,150 mm, table load: 900 kg, rotational speed (max.): 12,000 rpm, overall weight: 4,400 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 9,150 h, spindle motor power: 13,000 W, spindle nose: BT-40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 250 mm, tool diameter: 130 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Bridgeport VMC 1000XP with 5 tool holders Year of manufacture: 04/2003 Serial number: 950693 3 axes Travel: X: 1020 mm, Y: 610 mm, Z: 600 mm Rapid traverse rate X and Y: 43 m/min, Z: 30 m/min Positioning accuracy: ±0.005 mm Repeatability: ±0.002 mm Y-axis with 4 guide rails Table: 1150 x 580 mm Table load: 900 kg Spindle motor power: 13 kW Speed: 12000 rpm Spindle taper: BT 40 Dual-arm tool changer: 30 tools Tool change time: 5.2 sec Blum measuring probe TC52 Oil mist extraction Coolant system Automatic central lubrication Vacuum monitor for operating a vacuum clamping plate Control: Heidenhain iTNC 530 Connection: 400 V, 3-phase, 50 Hz; Full load current 30 A, Total current 20 kVA Pneumatics: Compressed air 5.5 bar Gkodpfx Aszbqx Sekhed Dimensions: 2830 x 2340 x 2682 mm Weight: 4400 kg Spindle operating time: 9150 h The machine was mainly used for machining aluminum and plastic, so the guide rails and spindle are in very good condition. Including 5 tool holders: 1 Weldon chuck, Ø16 1 collet chuck OZ DIN 6388, Ø 2-16 1 collet chuck OZ DIN 6388, Ø 6-25 1 milling cutter holder 1 short drill chuck, Ø 1-13 mm

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table load: 900 kg, overall weight: 6,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Bridgeport VMC1000 XP3 was manufactured in 2005. It features an X-axis travel of 1020 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a worktable with dimensions of 1200 × 600 mm and a maximum table load of 900 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC1000 XP3 vertical machining centre we have for sale. Contact us for further details. Gkede Agvnrspfx Akhsd • Worktable dimensions: 1200 × 600 mm • Rapid traverse: X 43 m/min, Y 43 m/min, Z 36 m/min • Electrical: 415 V, 50 Hz, Full load current 58 A, Short-circuit rating 25 kA Additional equipment • Chip conveyor with auger discharge chute Technical Specification Taper Size BT 40

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 426P, table width: 490 mm, table length: 1,150 mm, table load: 900 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 19,000 W, spindle nose: BT 40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, CNC Heidenhain TNC 426P WORKING AREA: Longitudinal X: 1020 mm Transverse Y: 510 mm Vertical Z: 500 mm Rapid traverse rate for X, Y axes: 40 m/min Gkjdpfx Asz Iadyokhjd Rapid traverse rate for Z axis: 25 m/min SPINDLE: Spindle power: 19 kW Maximum rotation speed: 10,000 rpm Spindle taper: BT 40 TABLE: Surface area: 1150 x 490 mm T-slots: 5 slots at 100 mm intervals Maximum load capacity: 900 kg TOOL CHANGER: Magazine positions: 30 Tool change time: 3.5 sec Maximum tool weight: 6 kg Maximum length: 250 mm Maximum diameter: 80 mm Machine complete with: • Chip conveyor • Operating manuals and CE declaration Year of manufacture: 1997

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 610 mm, travel distance Y-axis: 5,110 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: Series 18i-MB, table load: 500 kg, overall weight: 6,400 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 21,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Bridgeport XP3-610 (VMC-610 XP3) was manufactured in 2005. It features an X-axis travel of 610 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a worktable with dimensions of 900 × 500 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport XP3-610 vertical machining centre we have for sale. Contact us for further details. • Worktable size: 900 × 500 mm • Max workpiece weight: 500 kg • Rapid traverse (X): 43 m/min • Rapid traverse (Y): 43 m/min • Rapid traverse (Z): 36 m/min • Electrical: 400 V, 3-phase, 50 Hz • Full load current: 50 A • Short circuit interrupt rating: 415 V / 10 kA • Manufacturer address (nameplate): Hardinge Bridgeport, Whiteacres, Cambridge Rd, Whetstone, Leic, LE8 6BD, England Technical Specification Gkjdpfx Ae Afxtgskhjd Taper Size BT 40

Condition: excellent (used), travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, controller manufacturer: Heidenhain TNC 426 PB, workpiece weight (max.): 750 kg, total height: 2,750 mm, total length: 4,000 mm, total width: 2,250 mm, table width: 490 mm, table length: 1,000 mm, table load: 750 kg, rotational speed (max.): 12,000 rpm, overall weight: 4,200 kg, spindle motor power: 13,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, 3-axis CNC machine (VMC) BRIDGEPORT - VMC 800 XP MACH-ID 9835 Make: BRIDGEPORT Type: VMC 800 XP Control: Heidenhain TNC 426 PB X - Travel: 800mm Y - Travel: 510mm Z - Travel: 600mm Table Length: 1000mm Table Width: 490mm Table load: 750 Feed rate X-Axis: 20000mm/min. Gedpfoz Nw Igex Akhskd Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: Sk40ISO/Bt/Mk Power on spindle: 13kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:15 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 4000mm Width: 2250mm Height: 2750mm Weight: 4200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, total length: 5,179 mm, table length: 1,800 mm, table width: 650 mm, total width: 3,345 mm, rapid traverse X-axis: 28,000 m/min, rapid traverse Y-axis: 28,000 m/min, rapid traverse Z-axis: 28,000 m/min, table load: 1,500 kg, overall weight: 7,500 kg, X - Travel: 1500mm Y - Travel: 800mm Z - Travel: 500mm Table Length: 1800mm Table Width: 650mm Table load: 1500 Feed rate X-Axis: 28000mm/min. Feed rate Y-Axis: 28000mm/min. Feed rate Z-Axis: 28000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13.5kW Speeds / ranges: 8000Rpm ATC / revolver: 24 Coolant through spindle / Bar:10 Gsdpfxjyhph Es Akhskd Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 5179mm Width: 3345mm Height: 2595mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, A CNC machining center is offered. Control: Heidenhain TNC 426, spindle motor power: 13kW, full-load current: 30A, internal coolant supply: 10bar, spindle hours: 21704h, machine power-on hours: 51118h, control power-on hours: 25924h, program run time: 20017h. Equipped with internal coolant supply 10bar, 4th and 5th axes and machine vises. Weight: approx. 4300kg. An on-site inspection is possible. Gksdpfx Aoz Dkiljkhjd

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,000 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 426, spindle speed (max.): 6,000 rpm, number of axes: 4, This 4-axis Bridgeport VMC 1000/30 was manufactured in 2003. It features an X-axis travel of 1000 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a 30-tool magazine and a BT40 spindle holder, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000/30 vertical machining centre we have for sale. Contact us for further details. • Tool taper: BT40 • Number of tool slots: 30 Gkodezkh I Uopfx Akhsd • Chip conveyor: Complete with Chip Conveyor

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 426, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis Bridgeport VMC 800/30 was manufactured in 2000. It features an X-axis travel of 800 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN 426 control and offers 30 tool positions, along with a BT40 spindle holder. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 800/30 vertical machining centre we have for sale. Contact us for further details. • 4th and 5th axis interface for Jones & Shipman rotary table (interface only; rotary table not specified) Technical Specification Taper Size BT 40 Gkjdpfx Aozf Nh Ejkhsd

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 426, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis Bridgeport VMC 800/30 was manufactured in 2000. It features an X-axis travel of 800 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a Heidenhain 426 control and has a spindle speed of 6000 RPM, along with 30 tool places. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 800/30 vertical machining centre we have for sale. Contact us for further details. • 4th and 5th axis interface for Jones & Shipman rotary table Gksdpfxozf I Uds Akhjd Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis Bridgeport VMC 1000/30 was manufactured in 2002. It features an impressive X-axis travel of 1000 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN TNC 530 control and a NIKKEN 5-axis rotary table. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000/30 vertical machining centre we have for sale. Contact us for further details. • Axis travel: Y 600 mm (note: another line lists Y = 300 mm; to be confirmed) Additional equipment • Nikken 5-axis rotary table, model 200ZA (200 mm) • Nikken 4th/5th axis interface Technical Specification Taper Size BT 40 Gkjdozf Iqrjpfx Akhjd

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,000 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 4, This 4-axis Bridgeport VMC 1000 was manufactured in 2003. It features an X-axis travel of 1,000 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN 530 control unit, a BT40 spindle holder, and a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000 vertical machining center we have for sale. Contact us for further details. Additional equipment • Chip conveyor Technical Specification Taper Size BT 40 Gkjdpfxszfqace Akhed

Year of construction: 2004, condition: ready for operation (used), Axes: XYZ (3-axis), travel X/Y/Z: 950mm/500mm/450mm, speed: 8000rpm, rapid traverse: 40m/min, spindle nose: SK40, table size X/Y: 580mm/1150mm, max. table load: 900kg, tool holder: BT40, tool capacity: 24, control: Heidenhain iTNC 530. dimensions X/Y/Z: approx. 2400mm/4400mm/2700mm, weight: approx. 5000kg. Gsdpfx Akstufb Ijhekd

Condition: used, Year of construction: 2008, Bridgeport Hardinge GX1000 Vertical Machining Centre (2008), Traverses X Y Z: 1020 x 540 x 540mm, Table 1120 x 540mm, Siemens 810 Control, 24 Station ATC, Spindle Power 15Kw,10,000rpm, BT40 Spindle, Coolant. Man No. NVCA8H0176. Country of Origin: Taiwan Gkede Ah E Enopfx Akhed Location: This lot is located in Leicester, UK. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: like new (used), Year of construction: 2018, operating hours: 240 h, functionality: fully functional, travel distance X-axis: 460 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 410 mm, feed rate X-axis: 48,000 m/min, feed rate Y-axis: 48,000 m/min, feed rate Z-axis: 48,000 m/min, controller manufacturer: siemens 828D, controller model: 828D, total height: 2,602 mm, total length: 3,350 mm, total width: 2,265 mm, table width: 320 mm, table length: 320 mm, table load: 250 kg, rotational speed (max.): 200 rpm, overall weight: 6,200 kg, spindle speed (max.): 18,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 60 mm, spindle motor power: 23 W, spindle nose: hsk63, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Due to the cessation of business operations, we are offering this like-new Hardinge H320 horizontal machining center, manufactured in 2018. Model: H320 Serial number: GHLB7G0001 Gkjdps Aazdxjfx Akhed Date of manufacture: 05/31/2018 Supply voltage: 400 V Number of phases: 3 Weight: 6200 kg Cooling on the ball screw spindles Spindle cooled Glass scales on all axes High-speed 4th axis with direct drive motor, 200 rpm Scraper chip conveyor It is also possible to take over the tool holders and machine clamps. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,000 kg, spindle nose: R8, Bridgeport 2HP Milling Machine Gkedpfx As Adrp Tjkhsd Vari speed Spindle speeds 60-4200rpm Table size 42" x 9" Chrome bedways Powered Traverse X Axis 2 Axis DRO Led work light Coolant pump & system Spindle Taper R8 Reground table as photos Metric leadscrews Power 3phase 400v

Condition: good (used), Year of construction: 2011, XYZ: 760 x 610 x 610mm, Table 900 x 600mm, 21kW, Heidenhain TNC530, 12000 rpm, 30 station ATC, BT40 taper, Gkjdpsz Rz Nqsfx Akhed swarf conveyor, through spindle coolant,

Condition: used, Year of construction: 2005, x-travel 600 mm y-travel 500 mm z-travel 600 mm control iTNC 530 Heidenhain table surface area 900 x 500 mm spindle turning speed - stepless 0-12.000 U/min Gkedpfxjvxwq Es Akhjd spindle drive 10 kW tool taper SK40 DIN 69871 tool magazin: 24 total power requirement 22 kW weight of the machine ca. 6,4 t dimensions of the machine ca. 5,3 x 3,5 x 3,5 m Chip conveyor scraper belt Coolant system 3 pumps / cartridge filter Grundfoss high-pressure pump type CRK2-220/22 A-W-A-AUUV

Condition: like new (used), Year of construction: 2021, Traverses X Y Z: 710 x 400 x 430mm, Table 800 x 400mm, table load 300kgs, Spindle speed 12,000rpm, Spindle taper CAT40, 5.5kW Spindle motor, Godjyt E Uxepfx Akhekd FANUC Oi , 20 Station ATC, Coolant, Low Volt light, swarf conveyor